AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

164-1131 CONSOLE GP-SIDE S/N B2D1-UP A/C PART OF 164-1388 CONSOLE GP-OPERATOR AN ATTACHMENT 416D BACKHOE LOADER


OPERATOR STATION
CONSOLE GP
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT

BACKHOE LOADER 416D BACKHOE LOADER B2D
 416D Backhoe Loader B2D00001-UP (MACHINE) POWERED BY 3054C Engine SEBP4184 416D B2D   (2004)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
185-3524 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
185-3530 CONSOLE GP-OPERATOR
CONSOLE GP-SIDE
164-1131 CONSOLE GP-SIDE
CONSOLE GP-SIDE
183-4997 CONSOLE GP-SIDE
CONSOLE GP-SIDE
183-4998 CONSOLE GP-SIDE
COVER GP-CONSOLE
183-4991 COVER GP-CONSOLE
 

#SEBP41840530
 

164-1131: CONSOLE GP-SIDE

164-1131 CONSOLE GP-SIDE
S/N B2D1-UP
A/C
PART OF 164-1388 CONSOLE GP-OPERATOR
AN ATTACHMENT
i01488081 SEBP4184
1641131 CONSOLE GP-SIDE Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9000 J [1] LOCK AS-CYLINDER  
2. 118-5503 [2] LOUVER AS  
3. 164-1133 [1] COVER  
4. 164-1134 [1] PIN  
5. 167-8252 [1] CONSOLE (LH)  
6. 188-7760 [1] PLATE  
7. 104-2091 [8] SCREW-FLAT HEAD (6-20X0.5-IN)  
8. 200-2673 [1] PLATE  
  J   REQUIRES 5P8500 KEY
 

#SEBP41840531
 

183-4997: CONSOLE GP-SIDE

183-4997 CONSOLE GP-SIDE
S/N B2D1-UP
PART OF 185-3530 CONSOLE GP-OPERATOR
AN ATTACHMENT
i01533191 SEBP4184
1834997 CONSOLE GP-SIDE Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1178 [5] CLIP  
2. 172-8591 M [16] NUT-CLIP (M6X1-THD)  
3. 183-4991 Y [1] COVER GP-CONSOLE  
4. 202-6141 [1] CONSOLE  
5. 204-7341 [1] COVER-FUSE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41840532
 

183-4998: CONSOLE GP-SIDE

183-4998 CONSOLE GP-SIDE
S/N B2D1-UP
PART OF 185-3524 CONSOLE GP-OPERATOR
AN ATTACHMENT
i01533196 SEBP4184
1834998 CONSOLE GP-SIDE Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-5503 [1] LOUVER AS  
2. 164-1178 C [5] CLIP  
3. 172-8591 CM [16] NUT-CLIP (M6X1-THD)  
4. 183-4991 Y [1] COVER GP-CONSOLE  
5. 202-6142 C [1] CONSOLE-SIDE  
6. 204-7341 [1] COVER-FUSE  
7. 104-2091 [4] SCREW-FLAT HEAD (6-20X0.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41840533
 

164-1400: CONTROL GP-HYDRAULIC HAND

164-1400 CONTROL GP-HYDRAULIC HAND
S/N B2D1-UP
STANDARD
PART OF 164-1410 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
i01456919 SEBP4184
1641400 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [4] BALL JOINT  
2. 8T-4815 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [1] PLATE  
6. 164-1399 [2] KNOB  
7. 164-1402 [2] SLEEVE  
8. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)(23MM THK)  
9. 164-1406 [4] ROD  
10. 164-1409 [1] LEVER AS (RH)(RH)  
11. 164-1411 [1] LEVER AS (LH)(LH)  
12. 164-1435 [2] PLATE  
13. 164-1560 [1] TOWER AS  
14. 167-8248 [1] CONSOLE-REAR  
15. 170-6312 [4] BEARING  
16. 179-8235 [4] LOCK PIN  
17. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)(BUCKET CONTROL)  
18. 6V-7744 M [8] LOCKNUT (M10X1.5-THD)  
19. 7X-7729 [8] WASHER (11X25X3-MM THK)  
20. 8C-4987 [4] PIN-CLEVIS  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4133 M [8] NUT (M10X1.5-THD)  
23. 8T-4138 M [6] BOLT (M6X1X20-MM)  
24. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
25. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
26. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
27. 9X-2038 [4] WASHER (7X19X2-MM THK)  
28. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
29. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP41840534
 

164-1420: CONTROL GP-HYDRAULIC HAND

164-1420 CONTROL GP-HYDRAULIC HAND
S/N B2D1-UP
EXCAVATOR
PART OF 164-1430 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
i01456938 SEBP4184
1641420 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
2. 8T-4773 [10] BALL JOINT  
3. 8T-4815 [2] ROD END  
4. 9R-9901 [6] FASTENER (CLIP)  
5. 142-7405 [2] COLLAR  
6. 164-1361 [2] BOOT  
7. 164-1371 [1] PLATE  
8. 164-1399 [2] KNOB  
9. 164-1402 [2] SLEEVE  
10. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)(23MM THK)  
11. 164-1409 [1] LEVER AS (RH)(RH)  
12. 164-1411 [1] LEVER AS (LH)(LH)  
13. 164-1421 [1] PLATE  
14. 164-1422 [1] SHAFT AS  
15. 164-1425 [1] COUPLER AS  
16. 164-1427 [2] ROD  
17. 164-1429 [1] COUPLER AS  
18. 164-1435 [2] PLATE  
19. 164-1438 [2] ROD  
20. 164-1441 [2] ROD  
21. 164-1560 [1] TOWER AS  
22. 167-8248 [1] CONSOLE-REAR  
23. 170-6312 [4] BEARING  
24. 9R-2807 [2] CLIP (RETAINER)  
25. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
26. 6V-7744 M [14] LOCKNUT (M10X1.5-THD)  
27. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
28. 7X-7729 [8] WASHER (11X25X3-MM THK)  
29. 9R-2806 [2] PIN  
30. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [16] NUT (M10X1.5-THD)  
32. 8T-4138 M [6] BOLT (M6X1X20-MM)  
33. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
34. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
35. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
36. 9X-2038 [4] WASHER (7X19X2-MM THK)  
37. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP41840535
 

164-1500: CONTROL GP-HYDRAULIC HAND

164-1500 CONTROL GP-HYDRAULIC HAND
S/N B2D1-UP
THREE LEVER FOOT SWING
PART OF 164-1510 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
i01456923 SEBP4184
1641500 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [4] SEAL-LIP TYPE  
2. 8T-6431 [2] ROD END  
3. 142-7405 [2] COLLAR  
4. 164-1373 [1] PLATE  
5. 164-1397 [3] KNOB  
6. 164-1427 [1] ROD  
7. 164-1441 [1] ROD  
8. 164-1501 [1] LEVER AS (BUCKET)  
9. 164-1502 [1] LEVER AS (STICK)  
10. 164-1503 [1] LEVER AS (BOOM)  
11. 164-1514 [2] ROD  
12. 164-1521 [1] SHAFT AS  
13. 164-1523 [2] BEARING  
14. 164-1525 [1] ROD  
15. 164-1526 [1] GASKET  
16. 164-1570 [1] TOWER AS  
17. 183-4994 [1] CONSOLE-REAR  
18. 186-1583 [1] ROD END AS  
19. 190-5129 [1] FILM (BUCKET CONTROL)  
20. 241-4954 [1] GUARD (RH)  
21. 241-4955 [1] GUARD (LH)  
22. 117-5672 [3] BOOT  
23. 136-7439 B [2] SPACER (20X40X3-MM THK)  
24. 136-7440 B [2] SHIM (1-MM THK)  
25. 164-1515 [2] SUPPORT AS  
26. 164-1517 [2] SHAFT AS-PEDAL  
27. 164-1519 [1] SHAFT-LEVER  
28. 164-1527 [2] SEAL  
29. 164-1541 [1] PEDAL AS (RH)  
30. 164-1551 [1] PEDAL AS (LH)  
31. 179-8235 [4] LOCK PIN  
32. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
33. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
34. 6V-8335 M [2] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
35. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
36. 8C-4987 [4] PIN-CLEVIS  
37. 8M-3175 [4] WASHER-HARD (10.2X16X3-MM THK)  
38. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4133 M [11] NUT (M10X1.5-THD)  
40. 8T-4138 M [6] BOLT (M6X1X20-MM)  
41. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
42. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
43. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4773 [4] BALL JOINT  
45. 8T-4815 [5] ROD END  
46. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
47. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
48. 9R-2806 [2] PIN  
49. 9R-2807 [2] CLIP (RETAINER)  
50. 9R-9901 [6] FASTENER (CLIP)  
51. 9X-2038 [4] WASHER (7X19X2-MM THK)  
52. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41840536
 

164-1520: CONTROL GP-HYDRAULIC HAND

164-1520 CONTROL GP-HYDRAULIC HAND
S/N B2D1-UP
FOUR LEVER FOOT SWING
PART OF 164-1530 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
i01456922 SEBP4184
1641520 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [4] SEAL-LIP TYPE  
2. 8T-4773 [4] BALL JOINT  
3. 8T-4815 [6] ROD END  
4. 8T-6431 [3] ROD END  
5. 9R-9901 [6] FASTENER (CLIP)  
6. 101-2788 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
7. 164-1527 [2] SEAL  
8. 117-5672 [4] BOOT  
9. 136-7439 B [5] SPACER (20X40X3-MM THK)  
10. 136-7440 B [1] SHIM (1-MM THK)  
11. 142-7405 [1] COLLAR  
12. 164-1372 [1] PLATE  
13. 164-1397 [4] KNOB  
14. 164-1441 [1] ROD  
15. 164-1427 [1] ROD  
16. 164-1501 [1] LEVER AS (BUCKET)  
17. 164-1502 [1] LEVER AS (STICK)  
18. 164-1503 [1] LEVER AS (BOOM)  
19. 186-1583 [1] ROD END AS  
20. 164-1511 [1] LEVER AS (EXTENDABLE STICK)(ESTICK)  
21. 164-1514 [3] ROD  
22. 164-1515 [2] SUPPORT AS  
  5V-4410 [2] BUSHING  
23. 164-1517 [2] SHAFT AS-PEDAL  
24. 164-1519 [1] SHAFT-LEVER  
25. 164-1521 [1] SHAFT AS  
26. 164-1523 [2] BEARING  
27. 164-1525 [1] ROD  
28. 164-1541 [1] PEDAL AS (RH)  
29. 164-1551 [1] PEDAL AS (LH)  
30. 164-1570 [1] TOWER AS  
31. 179-8235 [5] LOCK PIN  
32. 183-4999 [1] CONSOLE-REAR  
33. 190-5129 [1] FILM (BUCKET CONTROL)  
34. 164-1526 [1] GASKET  
35. 6V-7744 M [7] LOCKNUT (M10X1.5-THD)  
36. 6V-8335 M [2] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
37. 6V-8932 M [1] SETSCREW-SOCKET (M6X1X10-MM)  
38. 8C-4987 [5] PIN-CLEVIS  
39. 8M-3175 [3] WASHER-HARD (10.2X16X3-MM THK)  
40. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4133 M [13] NUT (M10X1.5-THD)  
42. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
43. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
44. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
46. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
47. 9R-2806 [2] PIN  
48. 9R-2807 [2] CLIP (RETAINER)  
49. 9X-2038 [4] WASHER (7X19X2-MM THK)  
50. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
51. 8T-4138 M [6] BOLT (M6X1X20-MM)  
52. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
53. 241-4954 [1] GUARD (RH)  
54. 241-4955 [1] GUARD (LH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41840537
 

183-3120: CONTROL GP-HYDRAULIC HAND

183-3120 CONTROL GP-HYDRAULIC HAND
S/N B2D1-UP
SINGLE TILT
PART OF 214-6950 CHASSIS AR
i01445853 SEBP4184
1833120 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
4. 5H-3193 [1] PIN-SPRING  
5. 8T-4766 [1] ROD END  
6. 8T-4773 [1] BALL JOINT  
7. 8T-4815 [2] ROD END  
8. 9R-1765 [1] COVER-TOP  
9. 9R-1766 [1] COVER-BOTTOM  
10. 9R-1767 [1] BOOT  
11. 9R-9868 [1] SWITCH GP-PUSH BUTTON  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 107-5591 [1] NUT-JAM (3/4-16-THD)  
13. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
14. 140-6021 [1] PLATE  
15. 164-1368 [8] FASTENER (CLIP)  
16. 164-1369 [1] PLATE  
17. 179-8235 [1] LOCK PIN  
18. 183-3121 [1] BRACKET AS  
19. 183-3122 [1] LEVER AS  
20. 183-3131 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
21. 183-3135 [1] JOINT AS  
  183-3136 [1] BUSHING  
22. 183-3137 [1] PIN  
23. 183-3153 [1] ROD  
24. 183-3155 [1] ROD  
25. 183-3156 [1] ROD  
26. 201-8069 [1] SEAL  
27. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
28. 3S-2093 [1] STRAP-CABLE  
29. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
30. 8C-4987 [1] PIN-CLEVIS  
31. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [8] NUT (M10X1.5-THD)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
35. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-9501 [2] SCREW (10-16X0.75-IN)  
37. 9R-2807 [1] CLIP (RETAINER)  
38. 9R-3067 [1] PIN  
39. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41840538
 

183-3150: CONTROL GP-HYDRAULIC HAND

183-3150 CONTROL GP-HYDRAULIC HAND
S/N B2D1-UP
PART OF 186-5333 HYDRAULIC AR
AN ATTACHMENT
i01496513 SEBP4184
1833150 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 [3] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [1] RING-RETAINING  
3. 8T-4773 [1] BALL JOINT  
4. 8T-4815 [1] ROD END  
5. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
6. 164-1395 [1] KNOB  
7. 179-8235 [1] LOCK PIN  
8. 183-3151 [1] LEVER AS  
  183-3136 [1] BUSHING  
9. 183-3153 [1] ROD  
10. 183-3156 [1] ROD  
11. 8C-4987 [1] PIN-CLEVIS  
12. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [3] NUT (M10X1.5-THD)  
14. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  M   METRIC PART
 

#SEBP41840539
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N B2D1-UP
AN ATTACHMENT
i01533063 SEBP4184
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 416D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
  140-6021 [1] PLATE  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Vandalism Guard (Rotating Gauge Panel) - If Equipped
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Technical Information Bulletin
Failed Service Meters{7478}
Failed Service Meters{7478}
Service Magazine
A New Key Start Switch Is Available For Series D Backhoe Loaders {1408, 1416}
2008/02/04

Caterpillar Parts SIS Catalog 416D :

CONSOLE GP-OPERATOR
185-3530 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
185-3524 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
164-1388 CONSOLE GP-OPERATOR
CONSOLE GP-FRONT
183-4995 CONSOLE GP-FRONT
CONDENSER & MTG GP-REFRIGERANT
144-2222 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1908 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
234-8601 COMPRESSOR & MTG GP-REFRIG
COMPARTMENT GP-LITERATURE
200-2676 COMPARTMENT GP-LITERATURE
CONSOLE GP-SIDE
183-4997 CONSOLE GP-SIDE
CONSOLE GP-SIDE
183-4998 CONSOLE GP-SIDE
CONTROL GP-HYDRAULIC HAND
164-1400 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1420 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1500 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1520 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3120 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3150 CONTROL GP-HYDRAULIC HAND

Truck sale:

Caterpillar 416D
 
Caterpillar 416D
- backhoe loader
THOMPSON MACHINERY COMMERCE CORPORATION
Caterpillar 416D
 
Caterpillar 416D
- backhoe loader
MILTON CAT
Caterpillar 416D, backhoe loader, Construction
27,900 
Caterpillar 416D, backhoe loader, Construction
- backhoe loader
MILTON CAT
Caterpillar 416D, graaf-laadcombinaties, Bouw
49.000 
Caterpillar 416D, graaf-laadcombinaties, Bouw

RING POWER CORP.
 
 
Caterpillar 416D, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
PETERSON TRACTOR CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.