ELECTRICAL AND STARTING SYSTEM
WIRING GPOPERATOR STATION
WIPER GP-WINDOWCONSOLE GP
IMPLEMENTS
STABILIZER GPOPERATOR STATION
CONSOLE GPFUEL SYSTEM
CONTROL GP-GOVERNOROPERATOR STATION
SEAT GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP41840570
144-9931: MODULE GP-WARNING INDICATOR
144-9931 MODULE GP-WARNING INDICATOR
S/N B2D1-UP
PART OF 238-1165 WIRING GP-CONSOLE
FIELD REPLACEMENT ORDER @@@@@223-6542@@@@@
S/N B2D1-UP
PART OF 238-1165 WIRING GP-CONSOLE
FIELD REPLACEMENT ORDER @@@@@223-6542@@@@@
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS#SEBP41840571
223-6539: MODULE GP-WARNING INDICATOR
223-6539 MODULE GP-WARNING INDICATOR
S/N B2D1-UP
PART OF 238-1166 WIRING GP-CONSOLE
AN ATTACHMENT
S/N B2D1-UP
PART OF 238-1166 WIRING GP-CONSOLE
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS#SEBP41840572
223-6542: MODULE GP-WARNING INDICATOR
223-6542 MODULE GP-WARNING INDICATOR
S/N B2D896-UP
PART OF 238-1165 WIRING GP-CONSOLE
FIELD REPLACEMENT FOR @@@@@144-9931@@@@@
S/N B2D896-UP
PART OF 238-1165 WIRING GP-CONSOLE
FIELD REPLACEMENT FOR @@@@@144-9931@@@@@
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS#SEBP41840573
186-2589: MOTOR GP-WINDOW WIPER
186-2589 MOTOR GP-WINDOW WIPER -FRONT
S/N B2D1-UP
12 VOLT
PART OF 174-2024, 207-6051, 239-6308 WIPER GP-WINDOW
AN ATTACHMENT
S/N B2D1-UP
12 VOLT
PART OF 174-2024, 207-6051, 239-6308 WIPER GP-WINDOW
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 2. | 3F-9556 | [1] | LOCKWASHER | |
| 3. | 152-7691 | [1] | MOTOR GP-WINDOW WIPER (12-VOLT)(FRONT) | |
| 9G-3695 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 206-5823 | [1] | CAP (WIPER MOTOR) | |
| M | METRIC PART | |||
#SEBP41840574
202-5724: MOUNTING GP-INSTRUMENT PANEL
202-5724 MOUNTING GP-INSTRUMENT PANEL
S/N B2D1-UP
ROTATING VANDAL GUARD
AN ATTACHMENT
S/N B2D1-UP
ROTATING VANDAL GUARD
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-9000 J | [1] | LOCK AS-CYLINDER | |
| 2. | 164-1122 | [1] | BODY | |
| 3. | 164-1123 | [1] | BEZEL | |
| 4. | 164-1177 | [2] | CAP-END | |
| 5. | 168-4609 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 6. | 185-9777 | [1] | PLATE | |
| 7. | 191-5104 | [4] | MOUNT | |
| 8. | 192-7355 | [2] | PLATE | |
| 9. | 194-4250 | [2] | PIN | |
| 10. | 197-7499 M | [2] | BOLT (M4X0.7X25-MM) | |
| 11. | 202-5979 | [1] | HANDLE | |
| 12. | 202-6063 | [1] | FILM (START SWITCH) | |
| 13. | 131-3540 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 15. | 214-9035 M | [8] | BOLT (M4X0.7X16-MM) | |
| 16. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 17. | 8T-2659 M | [8] | LOCKNUT (M4X0.7-THD) | |
| 18. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 20. | 9X-2045 M | [5] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP41840575
183-6078: MOUNTING GP-STABILIZER CONTROL
183-6078 MOUNTING GP-STABILIZER CONTROL
S/N B2D1-UP
PART OF 209-4172 STABILIZER AR
AN ATTACHMENT
S/N B2D1-UP
PART OF 209-4172 STABILIZER AR
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS#SEBP41840576
184-7898: PANEL GP-INSTRUMENT
184-7898 PANEL GP-INSTRUMENT
S/N B2D1-UP
TWO WHEEL STEER, FRONT CONSOLE
PART OF 184-7970 POWER TRAIN AR
S/N B2D1-UP
TWO WHEEL STEER, FRONT CONSOLE
PART OF 184-7970 POWER TRAIN AR
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS#SEBP41840577
202-5812: PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-8858 J | [1] | SWITCH AS-START (KEY) | |
| 2. | 167-8283 | [1] | PANEL AS-INSTRUMENT | |
| 3. | 193-1509 | [1] | WIRE AS | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 144-1636 | [3] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2262 | [1] | WEDGE-PLUG LOCK (4-PIN) | ||
| 4. | 191-9104 | [1] | FILM-INSTRUCTION (START SWITCH)(START SWITCH) | |
| 5. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP41840578
243-0059: PEDAL GP-GOVERNOR
243-0059 PEDAL GP-GOVERNOR
S/N B2D1-UP
PART OF 234-8892, 249-0402 CONTROL GP-GOVERNOR
AN ATTACHMENT
S/N B2D1-UP
PART OF 234-8892, 249-0402 CONTROL GP-GOVERNOR
AN ATTACHMENT
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 129-3178 M | [1] | LOCKNUT (M6X1-THD) | |
| 2. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 3. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 4. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 8T-6902 | [3] | CLIP | |
| 6. | 3F-9556 | [2] | LOCKWASHER | |
| 7. | 095-0641 M | [4] | BOLT-SOCKET HEAD (M4X0.7X10-MM) | |
| 8. | 6V-8186 | [2] | NUT-FULL (5/16-24-THD) | |
| 9. | 9X-2842 M | [1] | BOLT (M8X1.25X45-MM) | |
| 10. | 243-0063 | [1] | BOOT | |
| AVAILABLE REPAIR KIT(S): | ||||
| 164-1154 | KIT-SERVICE | |||
| KIT INCLUDES CABLE CLAMPS & SCREWS. | ||||
| 243-0062 | KIT-REPAIR (GOVERNOR PEDAL) | |||
| KIT INCLUDES CABLE CLAMPS & SCREWS. | ||||
| M | METRIC PART | |||
#SEBP41840579
190-8918: SEAT BELT GP
For full view, you need register
Parts for your 416D BACKHOE LOADER:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Technical Information Bulletin
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Troubleshooting
Service Magazine
Troubleshooting the Bucket Positioner Mechanism (Return to Dig Mechanism) {5051, 5109, 5112, 5734}
2005/11/28
2005/11/28
An Improved Pressure Switch for the Ride Control is Available for Backhoe Loaders {1408, 5004}
2007/07/02
2007/07/02
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
