BASIC ENGINE
HOUSING GP-FLYWHEELGEAR GP
BELT TIGHTENER GP
CRANKSHAFT GP
ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
HOUSING GP-FLYWHEEL
#SEBP41861810
229-3711: HOUSING GP-FLYWHEEL
229-3711 HOUSING GP-FLYWHEEL -SLANT
S/N NXS29122-31300
NO.1 FLYWHEEL HOUSING WITH VERTICLE INSTALLATION ANGLE AND 10 DEGREE PADS
FOR USE WITH @@@@@220-1204@@@@@, WET AND DRY HOUSING APPLICATIONS, PLUG GROUP IF NO BRAKESAVER
ALSO AN ATTACHMENT
S/N NXS29122-31300
NO.1 FLYWHEEL HOUSING WITH VERTICLE INSTALLATION ANGLE AND 10 DEGREE PADS
FOR USE WITH @@@@@220-1204@@@@@, WET AND DRY HOUSING APPLICATIONS, PLUG GROUP IF NO BRAKESAVER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-1669 | [2] | PLUG-SEAL (FLYWHEEL HOUSING DRAIN) | |
| 2. | 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR)(FLYWHEEL HOUSING) | |
| 3. | 268-5589 | [1] | SEAL | |
| 4. | 268-5582 | [1] | SEAL | |
| 5. | 7X-7731 C | [1] | PLUG-PIPE (3/4-14-THD) | |
| 6. | 200-1222 C | [1] | HOUSING-FLYWHEEL | |
| 7. | 8T-6765 C | [2] | PLUG-PIPE (1/4-18-THD) | |
| 8. | 165-3925 | [1] | BOLT (3/8-16X5.75-IN) | |
| 9. | 165-3929 | [9] | BOLT (3/8-16X1.5-IN)(MARKED X) | |
| 10. | 165-3931 | [5] | BOLT (3/8-16X1.75-IN)(MARKED Y) | |
| 11. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN)(MARKED W) | |
| 12. | 5M-2894 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK)(MARKED W) | |
| 3E-7430 CF | [1] | PLUG-PIPE (3/4-14-THD) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
#SEBP41861811
229-3711: HOUSING GP-FLYWHEEL
229-3711 HOUSING GP-FLYWHEEL -SLANT
S/N NXS31301-31301; NXS31350-31350
NO.1 FLYWHEEL HOUSING WITH VERTICLE INSTALLATION ANGLE AND 10 DEGREE PADS
FOR USE WITH @@@@@220-1204@@@@@, WET AND DRY HOUSING APPLICATIONS, PLUG GROUP IF NO BRAKESAVER
ALSO AN ATTACHMENT
S/N NXS31301-31301; NXS31350-31350
NO.1 FLYWHEEL HOUSING WITH VERTICLE INSTALLATION ANGLE AND 10 DEGREE PADS
FOR USE WITH @@@@@220-1204@@@@@, WET AND DRY HOUSING APPLICATIONS, PLUG GROUP IF NO BRAKESAVER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-1669 | [2] | PLUG-SEAL (FLYWHEEL HOUSING DRAIN) | |
| 2. | 319-0785 Y | [1] | SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING) | |
| 3. | 268-5589 | [1] | SEAL | |
| 4. | 268-5582 | [1] | SEAL | |
| 5. | 216-9064 C | [1] | PLUG | |
| 216-8997 | [1] | SEAL-O-RING | ||
| 6. | 229-3721 C | [1] | HOUSING-FLYWHEEL | |
| 7. | 3K-8460 C | [2] | PLUG (1/2-20-THD) | |
| 1J-9671 | [2] | SEAL-O-RING | ||
| 8. | 165-3925 | [1] | BOLT (3/8-16X5.75-IN) | |
| 9. | 165-3929 | [9] | BOLT (3/8-16X1.5-IN)(MARKED X) | |
| 10. | 165-3931 | [5] | BOLT (3/8-16X1.75-IN)(MARKED Y) | |
| 11. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN)(MARKED W) | |
| 12. | 5M-2894 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK)(MARKED W) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41861812
304-2739: HOUSING GP-FLYWHEEL
304-2739 HOUSING GP-FLYWHEEL
S/N MXS3889-87178
PROVIDES SAE NO. 1 FLYWHEEL HOUSING (SLANT) WITH 10-DEGREE MOUNTING PADS, VERTICAL ENGINE INSTALLATION, 4 BOLT MOUNTING PATTERN, PROVIDES DRAIN BACK HOLE FOR TRANSMISSION
FOR USE WITH WET FLYWHEEL APPLICATION
S/N MXS3889-87178
PROVIDES SAE NO. 1 FLYWHEEL HOUSING (SLANT) WITH 10-DEGREE MOUNTING PADS, VERTICAL ENGINE INSTALLATION, 4 BOLT MOUNTING PATTERN, PROVIDES DRAIN BACK HOLE FOR TRANSMISSION
FOR USE WITH WET FLYWHEEL APPLICATION
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-1669 | [2] | PLUG-SEAL | |
| 2. | 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR FLYWHEEL HOUSING) | |
| 3. | 216-9065 | [1] | PLUG AS | |
| 3A. | 216-8997 | [1] | SEAL-O-RING | |
| 3B. | 216-9064 | [1] | PLUG | |
| 4. | 268-5582 | [1] | SEAL | |
| 5. | 268-5589 | [1] | SEAL | |
| 6. | 304-2738 | [1] | HOUSING-FLYWHEEL | |
| 7. | 148-8405 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 1J-9671 | [1] | SEAL-O-RING | ||
| 3K-8460 | [1] | PLUG (1/2-20-THD) | ||
| 8. | 165-3925 | [1] | BOLT (3/8-16X5.75-IN) | |
| 9. | 165-3929 | [9] | BOLT (3/8-16X1.5-IN)(MARKED X) | |
| 10. | 165-3931 | [5] | BOLT (3/8-16X1.75-IN)(MARKED Y) | |
| 11. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 12. | 5M-2894 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK)(MARKED W) | |
#SEBP41861813
248-2609: HOUSING GP-FRONT
248-2609 HOUSING GP-FRONT
THE CAM SENSOR IS RELOCATED TO THE SIDE OF THE FRONT HOUSING INSTEAD OF FROM THE BACK OF THE PLATE
ALSO AN ATTACHMENT
THE CAM SENSOR IS RELOCATED TO THE SIDE OF THE FRONT HOUSING INSTEAD OF FROM THE BACK OF THE PLATE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-1538 | [1] | STUD-TAPERLOCK (3/8-16X1.6-IN) | |
| 2. | 5M-2894 | [21] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 4. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 5. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 6. | 166-9144 | [1] | GASKET | |
| 7. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 8. | 353-9984 Y | [1] | PLATE AS-FRONT HOUSING | |
| 9. | 248-2607 | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 246-4730 | [1] | HOUSING-FRONT | ||
| 10. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 11. | 0S-1588 | [10] | BOLT (3/8-16X1.25-IN) | |
| 12. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41861814
253-3329: HOUSING GP-FRONT
253-3329 HOUSING GP-FRONT
S/N MXS1-61875
REQUIRES FASTENER GROUP WITH THE VARIOUS COMBINATIONS OF THE LISTED GROUPS, PROVIDES 1 ADDITIONAL STUD BOLT FOR OEM LINE ROUTING
FOR USE WITH OIL FILLER, FULL FRONT SOUND SUPPRESSION, FRONT END ACCESSORY DRIVE SOUND SUPPRESSION, ALTERNATOR MOUNTING, ACCESSORY DRIVE, RADIATOR SUPPORT, BRACE SUPPORT
ALSO AN ATTACHMENT
S/N MXS1-61875
REQUIRES FASTENER GROUP WITH THE VARIOUS COMBINATIONS OF THE LISTED GROUPS, PROVIDES 1 ADDITIONAL STUD BOLT FOR OEM LINE ROUTING
FOR USE WITH OIL FILLER, FULL FRONT SOUND SUPPRESSION, FRONT END ACCESSORY DRIVE SOUND SUPPRESSION, ALTERNATOR MOUNTING, ACCESSORY DRIVE, RADIATOR SUPPORT, BRACE SUPPORT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 120-9243 | [2] | STUD-SPECIAL (BRAKE) | |
| 2. | 126-1757 | [9] | WASHER (10.85X19.3X1.27-MM THK) | |
| 3. | 129-5427 | [2] | WASHER-SPECIAL (SEALING) | |
| 4. | 129-5428 | [12] | STUD (BRAKE) | |
| 5. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 6. | 166-9144 | [1] | GASKET | |
| 7. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 8. | 248-2606 | [1] | PLATE | |
| 9. | 248-2607 | [1] | HOUSING AS-FRONT | |
| 9A. | 246-4730 | [1] | HOUSING-FRONT | |
| 9B. | 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | |
| 10. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 11. | 0S-1588 | [9] | BOLT (3/8-16X1.25-IN) | |
| 12. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 13. | 174-9599 | [1] | STUD (3/8-16-THD) | |
| 14. | 2M-1538 | [1] | STUD-TAPERLOCK (3/8-16X1.6-IN) | |
| 15. | 5M-2894 | [21] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 17. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) |
#SEBP41861815
253-3329: HOUSING GP-FRONT
253-3329 HOUSING GP-FRONT
S/N MXS61876-99999; NXS1-UP
REQUIRES FASTENER GROUP WITH THE VARIOUS COMBINATIONS OF THE LISTED GROUPS, PROVIDES 1 ADDITIONAL STUD BOLT FOR OEM LINE ROUTING
FOR USE WITH OIL FILLER, FULL FRONT SOUND SUPPRESSION, FRONT END ACCESSORY DRIVE SOUND SUPPRESSION, ALTERNATOR MOUNTING, ACCESSORY DRIVE, RADIATOR SUPPORT, BRACE SUPPORT
ALSO AN ATTACHMENT
S/N MXS61876-99999; NXS1-UP
REQUIRES FASTENER GROUP WITH THE VARIOUS COMBINATIONS OF THE LISTED GROUPS, PROVIDES 1 ADDITIONAL STUD BOLT FOR OEM LINE ROUTING
FOR USE WITH OIL FILLER, FULL FRONT SOUND SUPPRESSION, FRONT END ACCESSORY DRIVE SOUND SUPPRESSION, ALTERNATOR MOUNTING, ACCESSORY DRIVE, RADIATOR SUPPORT, BRACE SUPPORT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 248-2607 | [1] | HOUSING AS-FRONT | |
| 3A. | 246-4730 | [1] | HOUSING-FRONT | |
| 3B. | 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | |
| 4. | 353-9984 Y | [1] | PLATE AS-FRONT HOUSING | |
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 0S-1588 | [9] | BOLT (3/8-16X1.25-IN) | |
| 7. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 8. | 129-3172 | [1] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 9. | 235-1088 | [1] | NUT (3/8-16-THD) | |
| 10. | 2M-1538 | [1] | STUD-TAPERLOCK (3/8-16X1.6-IN) | |
| 11. | 5M-2894 | [21] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 13. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41861816
245-0352: IDLER GP-BELT
245-0352 IDLER GP-BELT
FAN CENTER DISTANCE GREATER THAN 20 INCH
FOR USE WITH @@@@@217-8943@@@@@, @@@@@211-7862@@@@@
ALSO AN ATTACHMENT
FAN CENTER DISTANCE GREATER THAN 20 INCH
FOR USE WITH @@@@@217-8943@@@@@, @@@@@211-7862@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP41861817
250-5460: IDLER GP-BELT
250-5460 IDLER GP-BELT
S/N MXS33785-99999; NXS1-UP
FOR USE WITH @@@@@240-8213@@@@@, @@@@@255-3832@@@@@, FAN CENTER DISTANCE GREATER THAN 20-INCH
ALSO AN ATTACHMENT
S/N MXS33785-99999; NXS1-UP
FOR USE WITH @@@@@240-8213@@@@@, @@@@@255-3832@@@@@, FAN CENTER DISTANCE GREATER THAN 20-INCH
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP41861818
243-6718: KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
PART OF 357-4645 PARTS GP-ENGINE OVERHAUL
PART OF 357-4645 PARTS GP-ENGINE OVERHAUL
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS#SEBP41861819
395-3837: KIT-ENGINE GASKET
395-3837 KIT-ENGINE GASKET -SINGLE CYLINDER HEAD
INCLUDES GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. INCLUDES TURBO GASKETS. DOES NOT INCLUDE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 ENGINES WITH ONE CYLINDER HEAD ONLY. INCLUDES TURBO MOUNTING HARDWARE
FIELD REPLACEMENT ORDER @@@@@507-6208@@@@@
FIELD REPLACEMENT FOR 296-9934 KIT-GASKET
FOR USE WITH @@@@@286-7815@@@@@, SEHS0361, SEAL 5P-5678 WITH VALVE COVER BASE 234-5007
FIELD INSTALLATION
INCLUDES GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. INCLUDES TURBO GASKETS. DOES NOT INCLUDE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 ENGINES WITH ONE CYLINDER HEAD ONLY. INCLUDES TURBO MOUNTING HARDWARE
FIELD REPLACEMENT ORDER @@@@@507-6208@@@@@
FIELD REPLACEMENT FOR 296-9934 KIT-GASKET
FOR USE WITH @@@@@286-7815@@@@@, SEHS0361, SEAL 5P-5678 WITH VALVE COVER BASE 234-5007
FIELD INSTALLATION
For full view, you need register
Parts for your C15 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 243-1159 | [18] | FASTENER AS | ||
| (EACH INCLUDES) | ||||
| 149-7378 | [1] | GROMMET | ||
| 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | ||
| 197-8418 | [2] | GASKET | ||
| 197-8419 | [2] | GASKET (TURBOCHARGER) | ||
| 225-3102 | [1] | GASKET | ||
| 227-1204 | [1] | GASKET | ||
| 359-0908 | [1] | GASKET-CYLINDER HEAD | ||
| 139-3550 | [1] | GASKET-REGULATOR (HOUSING) | ||
| 4N-1156 | [2] | GASKET-REGULATOR COVER | ||
| 274-6851 | [1] | GASKET-TURBOCHARGER | ||
| 2N-2766 | [8] | LOCKNUT (3/8-16-THD) | ||
| 5P-5678 D | SEAL (3-M) | |||
| 142-2329 | [1] | SEAL | ||
| 160-7271 | [1] | SEAL | ||
| 233-8014 | [1] | SEAL | ||
| 272-0390 | [1] | SEAL | ||
| 359-1439 | [24] | SEAL AS-WATER | ||
| 6V-0128 | [2] | SEAL-CONNECTOR | ||
| 3S-9643 | [2] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3K-0360 | [4] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 5P-0840 | [2] | SEAL-O-RING | ||
| 6V-1197 | [1] | SEAL-O-RING | ||
| 6V-3250 | [4] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 6V-5048 | [6] | SEAL-O-RING | ||
| 6V-5759 | [3] | SEAL-O-RING | ||
| 6V-6353 | [2] | SEAL-O-RING | ||
| 6V-6609 | [6] | SEAL-O-RING | ||
| 6V-9027 | [4] | SEAL-O-RING | ||
| 8L-2777 | [12] | SEAL-O-RING | ||
| 8L-2786 | [1] | SEAL-O-RING | ||
| 9X-7430 | [6] | SEAL-O-RING | ||
| 033-5853 | [1] | SEAL-O-RING | ||
| 033-6027 | [2] | SEAL-O-RING | ||
| 061-8639 | [6] | SEAL-O-RING | ||
| 108-5803 | [5] | SEAL-O-RING | ||
| 112-3102 | [6] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 118-5068 | [2] | SEAL-O-RING | ||
| 166-2904 | [12] | SEAL-O-RING | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 214-7568 | [9] | SEAL-O-RING | ||
| 238-5080 | [5] | SEAL-O-RING | ||
| 238-5081 | [3] | SEAL-O-RING | ||
| 272-2583 | [1] | SEAL-O-RING | ||
| 238-5079 | [5] | SEAL-O-RING | ||
| 242-9537 | [3] | SEAL-VALVE COVER | ||
| 163-2478 | [24] | SEAL-VALVE STEM | ||
| 2N-9288 | [8] | STUD-TAPERLOCK (3/8-16X1.67-IN) | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| D | ORDER BY THE METER | |||
Information:
BASIC ENGINE
HOUSING GP-FLYWHEEL
Specifications
Testing and Adjusting
Disassembly and Assembly
