AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

152-2702 CYLINDER & MTG GP-HOIST S/N B1L1-1123 PART OF 208-0712, 228-2606 INSTALLATION AR-MACHINE Type 1 ALSO AN ATTACHMENT 725


HYDRAULIC SYSTEM
CYLINDER GP

ARTICULATED TRUCK 725 ARTICULATED TRUCK B1L
 725 Articulated Truck B1L00001-UP (MACHINE) POWERED BY C11 Engine SEBP4188 725 B1L   (2005)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MTG GP-HOIST
152-2702 CYLINDER & MTG GP-HOIST
CYLINDER & MTG GP-HOIST
152-2702 CYLINDER & MTG GP-HOIST
CYLINDER & MTG GP-HOIST
152-2702 CYLINDER & MTG GP-HOIST
CYLINDER GP-HOIST
241-4071 CYLINDER GP-HOIST
 

#SEBP41880740
 

152-2702: CYLINDER & MTG GP-HOIST

152-2702 CYLINDER & MTG GP-HOIST
S/N B1L1-1123
PART OF 208-0712, 228-2606 INSTALLATION AR-MACHINE
Type 1
ALSO AN ATTACHMENT
i01269747 SEBP4188
1522702 CYLINDER & MTG GP-HOIST Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2U-9204 [2] SPACER (17X25.4X11.5-MM THK)  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 5U-7151 [2] CAP-GREASE  
4. 6V-0406 [2] SEAL-BONDED  
5. 124-6696 [2] ADAPTER  
  5C-6266 [1] BOLT (5/8-11X1-IN)  
6. 127-1736 [2] PIN AS  
7. 241-4071 Y [2] CYLINDER GP-HOIST  
8. 150-6553 [2] PIN  
9. 164-8408 [4] PLATE-SPACER  
10. 166-7871 [2] WASHER-RUBBER (52X100X8-MM THK)  
11. 8C-2949 [2] RING-RETAINING  
12. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
13. 8T-4779 M [2] BOLT (M16X2X35-MM)  
14. 8T-5878 M [4] BOLT (M24X3X80-MM)  
15. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41880741
 

152-2702: CYLINDER & MTG GP-HOIST

152-2702 CYLINDER & MTG GP-HOIST
S/N B1L1-1123
PART OF 208-0712, 228-2606 INSTALLATION AR-MACHINE
Type 2
ALSO AN ATTACHMENT
i02525227 SEBP4188
1522702 CYLINDER & MTG GP-HOIST Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2U-9204 [2] SPACER (17X25.4X11.5-MM THK)  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 5U-7151 [2] CAP-GREASE  
4. 6V-0406 [2] SEAL-BONDED  
5. 124-6696 [2] ADAPTER  
  5C-6266 [1] BOLT (5/8-11X1-IN)  
6. 127-1736 [2] PIN AS  
7. 285-4031 CY [2] CYLINDER GP-HOIST  
8. 150-6553 [2] PIN  
9. 164-8408 [4] PLATE-SPACER  
10. 166-7871 [2] WASHER-RUBBER (52X100X8-MM THK)  
11. 8C-2949 [2] RING-RETAINING  
12. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
13. 8T-4779 M [2] BOLT (M16X2X35-MM)  
14. 8T-5878 M [4] BOLT (M24X3X80-MM)  
15. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41880742
 

152-2702: CYLINDER & MTG GP-HOIST

152-2702 CYLINDER & MTG GP-HOIST
S/N B1L1124-UP
PART OF 208-0712, 228-2606 INSTALLATION AR-MACHINE
ALSO AN ATTACHMENT
i02650744 SEBP4188
1522702 CYLINDER & MTG GP-HOIST Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2U-9204 [2] SPACER (17X25.4X11.5-MM THK)  
2. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
3. 5U-7151 [4] CAP-GREASE  
5. 6K-6967 C [2] ADAPTER-PIPE  
6. 2U-9202 C [2] PIN AS-TIP CYLINDER  
7. 285-4031 Y [2] CYLINDER GP-HOIST  
8. 150-6553 [2] PIN (HOIST)  
10. 166-7871 [2] WASHER-RUBBER (52X100X8-MM THK)  
11. 8C-2949 [2] RING-RETAINING  
12. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
13. 8T-4779 M [2] BOLT (M16X2X35-MM)  
14. 8T-5878 M [4] BOLT (M24X3X80-MM)  
15. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
   
  164-8408 BF [4] PLATE-SPACER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41880743
 

241-4071: CYLINDER GP-HOIST

241-4071 CYLINDER GP-HOIST
S/N B1L1-UP
114.3-MM (4.5-IN) BORE X 2332-MM (91.81-IN) STROKE
PART OF 152-2702 CYLINDER & MTG GP-HOIST
ALSO AN ATTACHMENT
i02207421 SEBP4188
2414071 CYLINDER GP-HOIST Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-4337 [1] HEAD  
  225-3284 [1] SEAL-WIPER  
2. 141-4338 [1] PISTON  
3. 141-4339 [1] ROD AS  
3A. 1J-6472 [2] RING-RETAINING  
3B. 066-5815 [1] BEARING-SELF-ALIGNING  
    -OR-
  319-2447 A [1] BEARING-SELF-ALIGNING  
4. 225-3284 [1] SEAL-WIPER  
5. 241-4072 [1] CYLINDER AS  
5A. 1J-6472 [2] RING-RETAINING  
5B. 066-5815 [1] BEARING-SELF-ALIGNING  
    -OR-
  319-2447 A [1] BEARING-SELF-ALIGNING  
6. 167-2208 [1] SEAL AS-BUFFER  
7. 167-2319 [1] SEAL-U-CUP  
8. 175-7902 [1] SEAL-O-RING  
9. 1K-7095 [1] RING-BACKUP  
10. 2U-2576 [1] NUT (1-1/2-6-THD)  
11. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
12. 4J-3745 [2] RING-WEAR  
13. 8T-7584 [1] RING-WEAR  
14. 9X-7269 [1] SEAL AS  
  A   NOT PART OF THIS GROUP
 

#SEBP41880744
 

285-4031: CYLINDER GP-HOIST

285-4031 CYLINDER GP-HOIST
S/N B1L1-UP
114.3-MM (4.5-IN) X 2332-MM (91.8-IN) STROKE
PART OF 152-2702 CYLINDER & MTG GP-HOIST
ALSO AN ATTACHMENT
i02525239 SEBP4188
2854031 CYLINDER GP-HOIST Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-4337 [1] HEAD  
2. 141-4339 [1] ROD AS  
2A. 1J-6472 [2] RING-RETAINING  
2B. 555-1699 [1] BEARING-ALIGNING  
3. 312-4247 J [1] SEAL-WIPER  
4. 241-4072 [1] CYLINDER AS  
4A. 1J-6472 [2] RING-RETAINING  
4B. 066-5815 [1] BEARING-SELF-ALIGNING  
5. 283-8467 [1] PISTON  
6. 312-4248 J [1] SEAL AS-BUFFER  
7. 421-4025 J [1] SEAL-U-CUP  
8. 175-7902 J [1] SEAL-O-RING  
9. 1K-7095 J [1] RING-BACKUP  
10. 2U-2576 [1] NUT (1-1/2-6-THD)  
11. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
12. 4J-3745 J [3] RING-WEAR  
13. 8T-7584 J [1] RING-WEAR  
14. 495-8197 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  449-7672 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES BACK-UP RING, WEAR RINGS, O-RINGS, WIPER SEAL, BUFFER SEAL, U-CUP SEAL & SEAL AS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP41880745
 

273-3266: CYLINDER GP-HYDRAULIC

273-3266 CYLINDER GP-HYDRAULIC -RH
S/N B1L1-2127
88.9-MM (3.5-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i02404889 SEBP4188
2733266 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4514 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 193-7806 I [1] HOSE AS  
12. 209-5025 [1] CYLINDER AS  
13. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 148-8364 [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
15. 289-2935 J [1] SEAL AS-BUFFER  
16. 289-2946 J [1] SEAL-U-CUP  
17. 308-1845 J [1] SEAL-WIPER  
18. 268-5823 [1] VALVE GP-RELIEF (STEERING CYLINDER)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 J [1] RING-BACKUP  
21. 4T-5613 J [1] RING-WEAR  
22. 4T-8054 J [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 J [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  228-1778 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP41880746
 

273-3267: CYLINDER GP-HYDRAULIC

273-3267 CYLINDER GP-HYDRAULIC -LH
S/N B1L1-2127
88.9-MM (3.49-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i02404892 SEBP4188
2733267 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4515 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 193-7806 I [1] HOSE AS  
12. 209-5026 [1] CYLINDER AS  
13. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 148-8364 [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
15. 289-2935 J [1] SEAL AS-BUFFER  
16. 289-2946 J [1] SEAL-U-CUP  
17. 308-1845 J [1] SEAL-WIPER  
18. 268-5823 [1] VALVE GP-RELIEF (STEERING CYLINDER)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 J [1] RING-BACKUP  
21. 4T-5613 J [1] RING-WEAR  
22. 4T-8054 J [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 J [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  228-1778 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP41880747
 

331-6041: CYLINDER GP-HYDRAULIC

331-6041 CYLINDER GP-HYDRAULIC -RH
S/N B1L2128-2332
88.9-MM (3.5-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i03099908 SEBP4188
3316041 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4514 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 209-5025 [1] CYLINDER AS  
12. 329-3030 [1] VALVE GP-RELIEF (DIRECT OPERATED)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
13. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
14. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
15. 167-2195 [1] SEAL AS-BUFFER  
16. 167-2304 [1] SEAL-U-CUP  
17. 193-7806 I [1] HOSE AS  
18. 229-9382 [1] SEAL-WIPER  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 [1] RING-BACKUP  
21. 4T-5613 [1] RING-WEAR  
22. 4T-8054 [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP41880748
 

331-6042: CYLINDER GP-HYDRAULIC

331-6042 CYLINDER GP-HYDRAULIC -LH
S/N B1L2128-2332
88.9-MM (3.5-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i03099912 SEBP4188
3316042 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4515 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 209-5026 [1] CYLINDER AS  
12. 329-3030 [1] VALVE GP-RELIEF (DIRECT OPERATED)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
13. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
14. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
15. 167-2195 [1] SEAL AS-BUFFER  
16. 167-2304 [1] SEAL-U-CUP  
17. 193-7806 I [1] HOSE AS  
18. 229-9382 [1] SEAL-WIPER  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 [1] RING-BACKUP  
21. 4T-5613 [1] RING-WEAR  
22. 4T-8054 [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP41880749
 

349-8517: CYLINDER GP-HYDRAULIC

349-8517 CYLINDER GP-HYDRAULIC -RH
S/N B1L2333-UP
88.9-MM (3.5-IN) BORE X 529-MM (20.8-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i03775050 SEBP4188
3498517 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 725 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING (INNER)  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4514 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 209-5025 [1] CYLINDER AS  
12. 308-1845 [1] SEAL-WIPER  
13. 348-6977 J [1] VALVE GP-RELIEF (DIRECT OPERATED)  
14. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
15. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
16. 289-2935 [1] SEAL AS-BUFFER  
17. 289-2946 [1] SEAL-U-CUP  
18. 193-7806 I [1] HOSE AS  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 [1] RING-BACKUP  
21. 4T-5613 [1] RING-WEAR  
22. 4T-8054 [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  372-7059 J [1] KIT-SEAL (RELIEF VALVE)  
    (INCLUDES O-RING SEALS & BACK-UP RINGS)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Hoist Cylinder Bearings - Lubricate
725 and 730 Articulated Trucks
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING THE BODY RAISE CYLINDERS ON CERTAIN 725 ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING THE BODY RAISE CYLINDERS ON CERTAIN 725 ARTICULATED TRUCKS
Service Letter-CSARL
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Applying Grease to the Hoist Cylinder Bearings{5102}
Applying Grease to the Hoist Cylinder Bearings{5102}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Hoist Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems
Cab Tilt Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems
Hoist Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
725, 730, 735, & 740 Truck Body Supports{0599, 0629, 0635, 0700, 5102, 7258}
725, 730, 735, & 740 Truck Body Supports{0599, 0629, 0635, 0700, 5102, 7258}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Hoist Cylinder - Remove
725 and 730 Articulated Trucks Machine Systems
Hoist Cylinder - Install
725 and 730 Articulated Trucks Machine Systems
Tailgate Cylinder - Remove
725 and 730 Articulated Trucks Machine Systems
Tailgate Cylinder - Install
725 and 730 Articulated Trucks Machine Systems
Tailgate Cylinder - Remove and Install
725 and 730 Articulated Trucks Machine Systems
Service Magazine
New Recommendation for Lubrication of Bearings {4303, 5107, 7200, 7201, 7258, 7271, 7424}
2009/04/27
Improved Hoist Cylinders Are Used {5102}
2006/10/30
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Hoist Cylinders that are Painted Black are Used {5102}
2011/05/20
A New Hoist Cylinder Bearing is Available From Parts Service for Certain Articulated Trucks {5102}
2014/06/23

Caterpillar Parts SIS Catalog 725 :

BRACKET AS-FILTER
301-1102 BRACKET AS-FILTER
ACCUMULATOR GP-HYDRAULIC
276-6799 ACCUMULATOR GP-HYDRAULIC
ACCUMULATOR GP-HYDRAULIC
276-6798 ACCUMULATOR GP-HYDRAULIC
ACCUMULATOR GP-HYDRAULIC
236-7796 ACCUMULATOR GP-HYDRAULIC
STEERING COLUMN GP-ADJUSTABLE
252-8050 STEERING COLUMN GP-ADJUSTABLE
PUMP GP-GEAR
255-5095 PUMP GP-GEAR
PUMP GP-GEAR
255-5095 PUMP GP-GEAR
PUMP GP-GEAR
189-6312 PUMP GP-GEAR
CYLINDER & MTG GP-HOIST
152-2702 CYLINDER & MTG GP-HOIST
CYLINDER & MTG GP-HOIST
152-2702 CYLINDER & MTG GP-HOIST
CYLINDER GP-HOIST
241-4071 CYLINDER GP-HOIST
CYLINDER GP-HOIST
285-4031 CYLINDER GP-HOIST
CYLINDER GP-HYDRAULIC
273-3266 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
273-3267 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
331-6041 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
331-6042 CYLINDER GP-HYDRAULIC

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.