282-6915 DIFFERENTIAL & BEVEL GEAR GP -CENTER S/N B1M1-2548 PART OF 139-4700 AXLE GP-CENTER AN ATTACHMENT 730

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP

0. 282-6915 DIFFERENTI
1. 282-6915 DIFFERENTI
2. 282-6916 DIFFERENTI
3. 282-6918 DIFFERENTI
4. 282-6918 DIFFERENTI
5. 282-6924 DIFFERENTI
6. 282-6924 DIFFERENTI
7. 282-6924 DIFFERENTI
8. 282-6924 DIFFERENTI
9. 371-1063 DIFFERENTI
0. INFORMATION

ARTICULATED TRUCK 730 ARTICULATED TRUCK B1M
730 Articulated Truck B1M00001-UP (MACHINE) POWERED BY C11 Engine SEBP4189 730 B1M (2004)

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP

147-7380 DIFFERENTIAL & BEVEL GEAR GP

188-1408 DIFFERENTIAL & BEVEL GEAR GP

282-6915 DIFFERENTIAL & BEVEL GEAR GP

282-6916 DIFFERENTIAL & BEVEL GEAR GP

282-6918 DIFFERENTIAL & BEVEL GEAR GP

#SEBP41890470

282-6915: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6915 DIFFERENTIAL & BEVEL GEAR GP -CENTER
S/N B1M1-2548
PART OF 139-4700 AXLE GP-CENTER
AN ATTACHMENT

i02520663 SEBP4189

2826915 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING
2.	1P-4693	[2]	CUP-BEARING
3.	1P-4694	[2]	CONE-BEARING
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING
9.	5P-9505	[1]	CONE-BEARING
10.	6V-3950	[1]	CONE-BEARING
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	9D-1853	[2]	RETAINER
14.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
15.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
16.	136-6324	[6]	DISC-FRICTION
17.	138-1486	[2]	CAGE-BEARING
18.	138-1487	[2]	RING-ADJUSTMENT
19.	138-1488	[2]	LOCK
20.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
21.	138-1497	[1]	CAGE
22.	138-1504	[1]	PISTON HOUSING
23.	138-1505	[1]	SPACER-SPECIAL
24.	138-1508	[1]	HUB
25.	138-4096	[5]	SHIM (0.05-MM THK)
26.	138-4097	[5]	SHIM (0.08-MM THK)
27.	138-4098	[3]	SHIM (0.12-MM THK)
28.	138-4099	[1]	SHIM (0.5-MM THK)
29.	258-4463	[1]	HUB AS
	151-8108	[3]	DOWEL
30.	151-8274	[6]	PLATE-CLUTCH
31.	151-8275	[1]	PLATE-CLUTCH
32.	151-8397	[2]	PLATE
33.	152-5464	[1]	GEAR (33-TEETH)
34.	160-8060	[1]	PISTON
35.	293-4503	[1]	SEAL-LIP TYPE
36.	163-1921	[1]	TUBE
37.	168-8410	[1]	GEAR AS (33-TEETH)
39.	286-3688	[1]	LOCKNUT AS
	5L-4753	[1]	RING-RETAINING
40.	188-1000 Y	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
41.	193-4302 Y	[1]	DIFFERENTIAL GP
43.	217-3252	[1]	BEARING-NEEDLE
44.	224-2323	[1]	BEARING-THRUST
45.	279-4630	[1]	SET-BEVEL GEAR
46.	290-4649	[1]	RETAINER-SEAL
47.	138-4114	[4]	SHIM (0.08-MM THK)
48.	138-4115	[5]	SHIM (0.12-MM THK)
49.	184-4338	[1]	SHIM (0.92-MM THK)
50.	1S-2199	[2]	DOWEL
51.	287-8326	[28]	BOLT (1/2-20X1.625-IN)
52.	2M-0849	[28]	WASHER-HARD (13.5X25.5X5-MM THK)
53.	4J-2506	[2]	SEAL-O-RING
54.	4K-6804	[1]	SEAL-O-RING
55.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
56.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
57.	6V-5057	[1]	SEAL-O-RING
58.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
59.	7X-7729	[3]	WASHER (11X25X3-MM THK)
60.	8C-3347	[2]	PIN-ROLL
61.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
63.	9F-1399	[1]	SEAL-O-RING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890471

282-6915: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6915 DIFFERENTIAL & BEVEL GEAR GP -CENTER
S/N B1M1-UP
PART OF 139-4700, 324-1356 AXLE GP-CENTER
AN ATTACHMENT

i03103421 SEBP4189

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING
2.	1P-4693	[2]	CUP-BEARING
3.	1P-4694	[2]	CONE-BEARING
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING
9.	5P-9505	[1]	CONE-BEARING
10.	6V-3950	[1]	CONE-BEARING
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	9D-1853	[2]	RETAINER
14.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
15.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
16.	136-6324	[6]	DISC-FRICTION
17.	138-1486	[2]	CAGE-BEARING
18.	138-1487	[2]	RING-ADJUSTMENT
19.	138-1488	[2]	LOCK
20.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
21.	138-1497	[1]	CAGE
22.	138-1504	[1]	PISTON HOUSING
23.	138-1505	[1]	SPACER-SPECIAL
24.	138-1508	[1]	HUB
25.	138-4096	[5]	SHIM (0.05-MM THK)
26.	138-4097	[5]	SHIM (0.08-MM THK)
27.	138-4098	[3]	SHIM (0.12-MM THK)
28.	138-4099	[1]	SHIM (0.5-MM THK)
29.	258-4463	[1]	HUB AS
	151-8108	[3]	DOWEL
30.	151-8274	[6]	PLATE-CLUTCH
31.	151-8275	[1]	PLATE-CLUTCH
32.	151-8397	[2]	PLATE
33.	152-5464	[1]	GEAR (33-TEETH)
34.	160-8060	[1]	PISTON
35.	293-4503	[1]	SEAL-LIP TYPE
36.	163-1921	[1]	TUBE
37.	168-8410	[1]	GEAR AS (33-TEETH)
39.	286-3688	[1]	LOCKNUT AS
	5L-4753	[1]	RING-RETAINING
40.	317-3020 CY	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
41.	193-4302 Y	[1]	DIFFERENTIAL GP
43.	217-3252	[1]	BEARING-NEEDLE
44.	224-2323	[1]	BEARING-THRUST
45.	279-4630	[1]	SET-BEVEL GEAR
46.	290-4649	[1]	RETAINER-SEAL
47.	138-4114	[4]	SHIM (0.08-MM THK)
48.	138-4115	[5]	SHIM (0.12-MM THK)
49.	184-4338	[1]	SHIM (0.92-MM THK)
50.	1S-2199	[2]	DOWEL
51.	287-8326	[28]	BOLT (1/2-20X1.625-IN)
52.	2M-0849	[28]	WASHER-HARD (13.5X25.5X5-MM THK)
53.	4J-2506	[2]	SEAL-O-RING
54.	4K-6804	[1]	SEAL-O-RING
55.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
56.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
57.	6V-5057	[1]	SEAL-O-RING
58.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
59.	7X-7729	[3]	WASHER (11X25X3-MM THK)
60.	8C-3347	[2]	PIN-ROLL
61.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
63.	9F-1399	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890472

282-6916: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6916 DIFFERENTIAL & BEVEL GEAR GP -FRONT, REAR
S/N B1M1-UP
PART OF 250-9572 AXLE GP-REAR
AN ATTACHMENT

i02521231 SEBP4189

2826916 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[2]	CUP-BEARING (TAPERED)
3.	1P-4694	[2]	CONE-BEARING (TAPERED)
4.	3S-1374	[3]	SPRING
5.	5L-2031	[1]	CUP-BEARING (TAPERED)
6.	5P-9505	[1]	CONE-BEARING (ROLLER)
7.	6V-3950	[1]	CONE-BEARING (TAPERED)
8.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
9.	366-7826	[6]	DISC-FRICTION
10.	138-1486	[2]	CAGE-BEARING
11.	138-1487	[2]	RING-ADJUSTMENT
12.	138-1488	[2]	LOCK
13.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
14.	138-1504	[1]	PISTON HOUSING
15.	138-1508	[1]	HUB
16.	138-3689 Y	[1]	CARRIER GP-DIFFERENTIAL (FRONT, REAR)
17.	138-4096	[5]	SHIM (0.05-MM THK)
18.	138-4097	[5]	SHIM (0.08-MM THK)
19.	138-4098	[3]	SHIM (0.12-MM THK)
20.	138-4099	[1]	SHIM (0.5-MM THK)
21.	147-7248	[1]	CAGE
22.	147-7249	[1]	RETAINER-SEAL
23.	258-4463	[1]	HUB AS
	151-8108	[3]	DOWEL
24.	151-8274	[6]	PLATE-CLUTCH
25.	151-8275	[1]	PLATE-CLUTCH
26.	151-8397	[2]	PLATE
27.	160-8060	[1]	PISTON
28.	356-1825	[1]	TUBE
29.	8T-4195 M	[19]	BOLT (M10X1.5X30-MM)
30.	9F-1399	[2]	SEAL-O-RING
31.	193-4302 Y	[1]	DIFFERENTIAL GP
32.	485-9743	[1]	WASHER-LOCK
33.	217-3252	[1]	BEARING-NEEDLE
34.	224-2323	[1]	BEARING-THRUST
35.	385-4695	[1]	GEAR SET-BEVEL
36.	123-4003	[1]	SEAL-LIP TYPE
37.	287-8326	[28]	BOLT (1/2-20X1.625-IN)
38.	2M-0849	[28]	WASHER-HARD (13.5X25.5X5-MM THK)
39.	356-2456	[2]	SEAL-O-RING
40.	4K-6804	[1]	SEAL-O-RING
41.	8C-3210 M	[4]	BOLT (M6X1X16-MM)
42.	5F-3106	[1]	SEAL-O-RING
43.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
45.	7X-7729	[3]	WASHER (11X25X3-MM THK)
46.	8C-3347	[2]	PIN-ROLL
47.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
48.	486-5000	[1]	NUT
49.	485-9742	[1]	WASHER
50.	5L-4753	[1]	RING-RETAINING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890473

282-6918: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6918 DIFFERENTIAL & BEVEL GEAR GP
S/N B1M1-UP
PART OF 147-7400 AXLE GP-FRONT, 147-7700, 324-1362, 324-1364 AXLE GP-REAR
ALSO AN ATTACHMENT

i02521242 SEBP4189

2826918 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING
2.	1P-4693	[1]	CUP-BEARING
3.	1P-4694	[1]	CONE-BEARING
4.	3S-1374	[3]	SPRING
5.	5L-2031	[1]	CUP-BEARING
6.	5P-9505	[1]	CONE-BEARING
7.	6V-3950	[1]	CONE-BEARING
8.	8S-9075	[1]	CONE-BEARING
9.	8S-9076	[1]	CUP-BEARING
10.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
11.	136-6324	[7]	DISC-FRICTION
12.	138-1486	[1]	CAGE-BEARING
13.	138-1487	[1]	RING-ADJUSTMENT
14.	138-1488	[1]	LOCK
15.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
16.	138-1504	[1]	PISTON HOUSING
17.	138-3623	[1]	CAGE
18.	138-3624	[1]	RING
19.	138-3626	[1]	LOCK
20.	138-3638	[1]	HUB
21.	138-4096	[5]	SHIM (0.05-MM THK)
	138-4097	[5]	SHIM (0.08-MM THK)
	138-4098	[3]	SHIM (0.12-MM THK)
	138-4099	[1]	SHIM (0.5-MM THK)
25.	369-1018 Y	[1]	CARRIER GP-DIFFERENTIAL (AXLE, FRONT, REAR)
26.	147-7248	[1]	CAGE
27.	147-7249	[1]	RETAINER-SEAL
28.	151-8274	[7]	PLATE-CLUTCH
29.	151-8275	[1]	PLATE-CLUTCH
30.	151-8397	[2]	PLATE
31.	160-8060	[1]	PISTON
32.	356-1825	[1]	TUBE
34.	486-5000	[1]	NUT
35.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
37.	217-3252	[1]	BEARING-NEEDLE
38.	224-2323	[1]	BEARING-THRUST
39.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
40.	385-4746	[1]	SET-BEVEL GEAR
41.	123-4003	[1]	SEAL-LIP TYPE
42.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
43.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
44.	356-2456	[2]	SEAL-O-RING
45.	4K-6804	[1]	SEAL-O-RING
46.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
47.	175-7904	[1]	SEAL-O-RING
48.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
49.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
50.	7X-7729	[3]	WASHER (11X25X3-MM THK)
51.	8C-3347	[2]	PIN-ROLL
52.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
53.	8T-4195 M	[19]	BOLT (M10X1.5X30-MM)
54.	9F-1399	[2]	SEAL-O-RING
55.	5L-4753	[1]	RING-RETAINING
56.	485-9742	[1]	WASHER
57.	485-9743	[1]	WASHER-LOCK
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890474

282-6918: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6918 DIFFERENTIAL & BEVEL GEAR GP
S/N B1M3117-UP
PART OF 324-1364 AXLE GP-REAR
AN ATTACHMENT

i07423754 SEBP4189

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	377-9318 C	[1]	SEAL-D-RING
2.	1J-2860	[1]	CUP-BEARING
3.	1P-4693	[1]	CUP-BEARING
4.	1P-4694	[1]	CONE-BEARING
5.	3S-1374	[3]	SPRING
6.	8S-9075	[1]	CONE-BEARING
7.	5L-2031	[1]	CUP-BEARING
8.	5L-4753	[1]	RING-RETAINING
9.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
11.	366-7826 C	[7]	DISC-FRICTION
12.	5P-9505	[1]	CONE-BEARING
13.	138-1487	[1]	RING-ADJUSTMENT
14.	138-1488	[1]	LOCK
15.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
16.	138-1504	[1]	PISTON HOUSING
17.	6V-3950	[1]	CONE-BEARING
18.	138-3624	[1]	RING
19.	138-3626	[1]	LOCK
20.	138-3638	[1]	HUB
21.	138-4096 B	[5]	SHIM (0.05-MM THK)
22.	138-4097 B	[5]	SHIM (0.08-MM THK)
23.	138-4098 B	[3]	SHIM (0.12-MM THK)
24.	138-4099 B	[1]	SHIM (0.5-MM THK)
25.	147-7248	[1]	CAGE
26.	147-7249	[1]	RETAINER-SEAL
27.	151-8274	[7]	PLATE-CLUTCH
28.	151-8275	[1]	PLATE-CLUTCH
29.	151-8397	[2]	PLATE
30.	366-6932 C	[1]	PISTON
31.	323-6069 CY	[1]	DIFFERENTIAL GP
32.	217-3252	[1]	BEARING-NEEDLE
33.	224-2323	[1]	BEARING-THRUST
34.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
35.	485-9743	[1]	WASHER-LOCK
36.	356-1825	[1]	TUBE
37.	320-1106 C	[1]	CARRIER GP-DIFFERENTIAL
	6V-9167 M	[4]	BOLT (M20X2.5X140-MM)
	8T-3282	[4]	WASHER-HARD (22X35X3.5-MM THK)
	138-1477	[4]	BUSHING
	157-7240	[2]	DOWEL
38.	486-4949	[1]	GEAR SET-BEVEL
39.	123-4003	[1]	SEAL-LIP TYPE
40.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
41.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
42.	356-2456	[2]	SEAL-O-RING
43.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
44.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
45.	7X-7729	[3]	WASHER (11X25X3-MM THK)
46.	8C-3347	[2]	PIN-ROLL
47.	377-9319 C	[1]	SEAL-D-RING
48.	8S-9076	[1]	CUP-BEARING
49.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
50.	8T-4195 M	[19]	BOLT (M10X1.5X30-MM)
51.	8T-4224 C	[4]	WASHER-HARD (8.8X16X2-MM THK)
52.	175-7904	[1]	SEAL-O-RING
53.	485-9742	[1]	WASHER
54.	486-5000	[1]	NUT
55.	9F-1399	[1]	SEAL-O-RING
56.	347-3253 C	[2]	COVER
57.	5A-3604 CM	[4]	BOLT-SOCKET HEAD (M8X1.25X25-MM)
58.	7X-4744 C	[2]	SEAL-O-RING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890475

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1M742-UP
PART OF 147-6800 AXLE GP-CENTER
Type 1
ALSO AN ATTACHMENT

i02521238 SEBP4189

2826924 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER (TAPERED)
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	9D-1853	[2]	RETAINER
16.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE (BEARING)
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	163-1921	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	188-1002 Y	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	279-4570	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	4J-2506	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890476

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1M742-UP
PART OF 147-6800 AXLE GP-CENTER
Type 2
ALSO AN ATTACHMENT

i03016689 SEBP4189

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	9D-1853	[2]	RETAINER
16.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	163-1921	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	317-3021 CY	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	279-4570	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	4J-2506	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890477

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1M742-UP
PART OF 147-6800 AXLE GP-CENTER
Type 3
ALSO AN ATTACHMENT

i05368214 SEBP4189

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	9D-1853	[2]	RETAINER
16.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	356-1825 C	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	369-1017 CY	[1]	CARRIER GP-DIFFERENTIAL
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	279-4570	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	356-2456 C	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890478

282-6924: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1M742-UP
PART OF 147-6800 AXLE GP-CENTER
Type 4
ALSO AN ATTACHMENT

i05757250 SEBP4189

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2860	[1]	CUP-BEARING (TAPERED)
2.	1P-4693	[1]	CUP-BEARING (TAPERED ROLL)
3.	1P-4694	[1]	CONE-BEARING (TAPERED)
4.	2D-9572	[1]	SEAL-O-RING
5.	3L-9409	[1]	CUP-BEARING (TAPERED ROLL)
6.	314-9342	[1]	BEARING AS-TAPERED ROLLER
7.	3S-1374	[3]	SPRING
8.	5L-2031	[1]	CUP-BEARING (TAPERED ROLL)
9.	5P-9505	[1]	CONE-BEARING (ROLLER)
10.	6V-3950	[1]	CONE-BEARING (TAPERED)
11.	8H-7801	[1]	CONE-BEARING
12.	8H-7803	[1]	CUP-BEARING
13.	8S-9075	[1]	CONE-BEARING (TAPERED)
14.	8S-9076	[1]	CUP-BEARING (TAPERED ROLL)
15.	393-1060 C	[1]	RING-RETAINING
17.	127-1960 M	[8]	SCREW-FLAT HEAD (M6X1X16-MM)
18.	136-6324	[7]	DISC-FRICTION
19.	138-1486	[1]	CAGE-BEARING
20.	138-1487	[1]	RING-ADJUSTMENT
21.	138-1488	[1]	LOCK
22.	138-1490	[3]	SPACER (10.2X18X15-MM THK)
23.	138-1497	[1]	CAGE
24.	138-1504	[1]	PISTON HOUSING
25.	138-3623	[1]	CAGE (BEARING)
26.	138-3624	[1]	RING
27.	138-3626	[1]	LOCK
28.	138-3628	[1]	SPACER (79X103X16.4-MM THK)
29.	138-3638	[1]	HUB
30.	138-4096	[5]	SHIM (0.05-MM THK)
31.	138-4097	[5]	SHIM (0.08-MM THK)
32.	138-4098	[3]	SHIM (0.12-MM THK)
33.	138-4099	[1]	SHIM (0.5-MM THK)
34.	151-8274	[7]	PLATE-CLUTCH
35.	151-8275	[1]	PLATE-CLUTCH
36.	151-8397	[2]	PLATE
37.	152-5464	[1]	GEAR (33-TEETH)
38.	160-8060	[1]	PISTON
39.	293-4503	[1]	SEAL-LIP TYPE
40.	356-1825	[1]	TUBE
41.	168-8410	[1]	GEAR AS (33-TEETH)
42.	8T-4195 M	[13]	BOLT (M10X1.5X30-MM)
43.	9F-1399	[1]	SEAL-O-RING
44.	369-1017 Y	[1]	CARRIER GP-DIFFERENTIAL
45.	193-4303 Y	[1]	DIFFERENTIAL GP (DRIVE AXLE)
46.	286-3688	[1]	LOCKNUT AS
	5L-4753	[1]	RING-RETAINING
47.	217-3252	[1]	BEARING-NEEDLE
48.	224-2323	[1]	BEARING-THRUST
49.	258-4465	[1]	HUB AS-SPLINE
	151-8108	[3]	DOWEL
50.	385-4749 C	[1]	SET-BEVEL GEAR
51.	290-4649	[1]	RETAINER-SEAL
52.	138-4114	[4]	SHIM (0.08-MM THK)
53.	138-4115	[5]	SHIM (0.12-MM THK)
54.	184-4338	[1]	SHIM (0.92-MM THK)
55.	1S-2199	[2]	DOWEL
56.	287-8326	[30]	BOLT (1/2-20X1.625-IN)
57.	2M-0849	[30]	WASHER-HARD (13.5X25.5X5-MM THK)
58.	356-2456	[2]	SEAL-O-RING
59.	4K-6804	[1]	SEAL-O-RING
60.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
61.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	6V-5057	[1]	SEAL-O-RING
63.	7X-0909 M	[4]	BOLT (M12X1.75X140-MM)
64.	7X-7729	[3]	WASHER (11X25X3-MM THK)
65.	8C-3347	[2]	PIN-ROLL
66.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP41890479

371-1063: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

371-1063 DIFFERENTIAL & BEVEL GEAR GP
S/N B1M1-UP
PART OF 324-1356 AXLE GP-CENTER
Type 1
AN ATTACHMENT

i04678690 SEBP4189

3711063 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-4693	[2]	CUP-BEARING
2.	1P-4694	[2]	CONE-BEARING
3.	2D-9572	[1]	SEAL-O-RING
4.	3L-9409	[1]	CUP-BEARING
5.	5L-2031	[1]	CUP-BEARING
6.	5P-9505	[1]	CONE-BEARING
7.	6V-3950	[1]	CONE-BEARING
8.	8H-7801	[1]	CONE-BEARING
9.	8H-7803	[1]	CUP-BEARING
10.	9D-1853	[2]	RETAINER
11.	9D-1854	[1]	SPACER-SPECIAL (12.7-MM THK)
12.	138-1486	[2]	CAGE-BEARING
13.	138-1487	[2]	RING-ADJUSTMENT
14.	138-1488	[2]	LOCK
15.	138-1497	[1]	CAGE
16.	138-1505	[1]	SPACER-SPECIAL
17.	138-4096	[5]	SHIM (0.05-MM THK)
18.	138-4097	[5]	SHIM (0.08-MM THK)
19.	138-4098	[3]	SHIM (0.12-MM THK)
20.	138-4099	[1]	SHIM (0.5-MM THK)
21.	152-5464	[1]	GEAR (33-TEETH)
22.	168-8410	[1]	GEAR AS (33-TEETH)
23.	193-4302 Y	[1]	DIFFERENTIAL GP
24.	279-4630	[1]	SET-BEVEL GEAR
25.	286-3688	[1]	LOCKNUT AS
	5L-4753	[1]	RING-RETAINING
26.	290-4649	[1]	RETAINER-SEAL
27.	293-4503	[1]	SEAL-LIP TYPE
28.	314-9342	[1]	BEARING AS-TAPERED ROLLER
29.	317-3020 Y	[1]	CARRIER GP-DIFFERENTIAL (AXLE, CENTER)
30.	138-4114	[4]	SHIM (0.08-MM THK)
31.	138-4115	[5]	SHIM (0.12-MM THK)
32.	184-4338	[1]	SHIM (0.92-MM THK)
33.	1J-2860	[1]	CUP-BEARING
34.	1S-2199	[2]	DOWEL
35.	287-8326	[28]	BOLT (1/2-20X1.625-IN)
36.	2M-0849	[28]	WASHER-HARD (13.5X25.5X5-MM THK)
38.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
39.	6V-5057	[1]	SEAL-O-RING
40.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-4195 M	[10]	BOLT (M10X1.5X30-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

DIFFERENTIAL & BEVEL GEAR GP

Operation and Maintenance Manual

Differential and Final Drive Oil - Change
725 and 730 Articulated Trucks

Differential and Final Drive Oil Sample - Obtain
725 and 730 Articulated Trucks

Differential and Final Drive Oil Level - Check
725 and 730 Articulated Trucks

Special Instruction

Pinning the Dowels on the Hub for Locking the Differential{3256, 3258}
Pinning the Dowels on the Hub for Locking the Differential{3256, 3258}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PINION LOCKNUT ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PINION LOCKNUT ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 730 and 730 Ejector ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 730 and 730 Ejector ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING TRUCKS FOR 314-9342 BEARING FAILURES ON CERTAIN 725, 725 OEM, 730, 730 OEM AND 730EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING TRUCKS FOR 314-9342 BEARING FAILURES ON CERTAIN 725, 725 OEM, 730, 730 OEM AND 730EJ ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIFFERENTIAL GEAR GROUP ON CERTAIN 725 AND 730 ARTICULATED TRUCKS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

700 Series Articulated Trucks, Differential and Bevel Gear, Service Part Inventory May Have Dowels Installed Incorrectly
700 Series Articulated Trucks, Differential and Bevel Gear, Service Part Inventory May Have Dowels Installed Incorrectly

700 Series Articulated Trucks, Disc Stack-Up Change in the Differential and Bevel Gear Gps, SIS Information has Changed
700 Series Articulated Trucks, Disc Stack-Up Change in the Differential and Bevel Gear Gps, SIS Information has Changed

725, 730, 730 EJECTOR & 735 Articulated Trucks, Pinion Locknut for Field Service
725, 730, 730 EJECTOR & 735 Articulated Trucks, Pinion Locknut for Field Service

Specifications

Differential and Bevel Gear (Center)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Tool Operating Manual

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

Service Letter-China

Service Letter-Asia

Systems Operation

Interaxle Differential
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential (Front and Rear Axle)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential (Center Axle)
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Reuse And Salvage Guidelines

Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage {3258, 3284}
Salvage of Articulated Truck Center Differential Carrier by Installation of Service Repair Cage {3258, 3284}

Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}

Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}

Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}

Contamination Control Guidelines

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Letter-APD

Testing and Adjusting

Differential Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Interaxle Differential Troubleshooting
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Interaxle Differential - Test
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential - Test
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Disassembly and Assembly

Differential and Bevel Gear (Front and Rear) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Remove
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Remove
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Front and Rear) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Disassemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Differential and Bevel Gear (Center) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train

Service Magazine

Clarification of the Markings on the Pinion Gear {3256, 3258}
2004/07/26

Correct Installation of the New 250-7858 Locknut and 250-7859 Locknut {3256, 3258}
2005/07/04

Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/02/06

Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/01/30

Change to Stackup of the Discs in the Differential and Bevel Gear {3256, 3258}
2007/05/21

Dowels for Servicing the Hub in the Differential Lock Are Available {3256, 3258}
2006/03/20

New Bevel Gear Bolts and Washers Can Improve Reliability in Articulated Trucks {3256, 3258}
2006/08/21

An Improved Hub for the Differential Lock Is Available {3256, 3258}
2006/08/14

New Differentials Are Used {3256, 3278}
2006/09/04

Rebuilt Differential and Bevel Gears Require A Break-In Period {3256, 3258}
2006/09/11

New Locknuts Are Now Used in the Differential {3256, 3258}
2007/02/26

A New Lip Seal Is Now Used {3256, 3258, 3278, 7555}
2007/09/10

Improvements Have Been Made to the Yokes of the Differential Pinion {3256, 3258, 3278}
2007/10/08

Improved Bearing Assembly for the Center Axle on Articulated Trucks {3256, 3258}
2008/01/28

Improved Differential Carrier for the Center Axle of 725 and 730 Articulated Trucks {3258, 3284}
2008/11/24

An Improved Procedure to Grease the Bearing Assembly for the Center Axle on Articulated Trucks {3256, 3258}
2009/06/08

Caterpillar Parts SIS Catalog 730 :

188-1408 DIFFERENTIAL & BEVEL GEAR GP

147-7380 DIFFERENTIAL & BEVEL GEAR GP

147-6790 DIFFERENTIAL & BEVEL GEAR GP

354-7467 COOLER GP-TRANSMISSION OIL

227-8354 COOLER GP-TRANSMISSION OIL

237-8054 COOLER GP-POWER TRAIN OIL

282-6915 DIFFERENTIAL & BEVEL GEAR GP

282-6916 DIFFERENTIAL & BEVEL GEAR GP

282-6918 DIFFERENTIAL & BEVEL GEAR GP

282-6924 DIFFERENTIAL & BEVEL GEAR GP