AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

152-2703 CYLINDER & MTG GP-HOIST S/N B1M1020-UP PART OF 208-4703, 228-2607 INSTALLATION AR-MACHINE ALSO AN ATTACHMENT 730


HYDRAULIC SYSTEM
CYLINDER GP
BRAKING SYSTEM
LINES GP

ARTICULATED TRUCK 730 ARTICULATED TRUCK B1M
 730 Articulated Truck B1M00001-UP (MACHINE) POWERED BY C11 Engine SEBP4189 730 B1M   (2004)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MTG GP-HOIST
152-2703 CYLINDER & MTG GP-HOIST
CYLINDER & MTG GP-HOIST
152-2703 CYLINDER & MTG GP-HOIST
CYLINDER & MTG GP-HOIST
152-2703 CYLINDER & MTG GP-HOIST
CYLINDER GP-HOIST
241-4062 CYLINDER GP-HOIST
CYLINDER GP-HOIST
285-4032 CYLINDER GP-HOIST
CYLINDER GP-HYDRAULIC
273-3266 CYLINDER GP-HYDRAULIC
 

#SEBP41890790
 

152-2703: CYLINDER & MTG GP-HOIST

152-2703 CYLINDER & MTG GP-HOIST
S/N B1M1020-UP
PART OF 208-4703, 228-2607 INSTALLATION AR-MACHINE
ALSO AN ATTACHMENT
i02630925 SEBP4189
1522703 CYLINDER & MTG GP-HOIST Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2U-9202 C [2] PIN AS-TIP CYLINDER  
2. 2U-9204 [2] SPACER (17X25.4X11.5-MM THK)  
3. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
4. 5U-7151 [4] CAP-GREASE  
5. 150-6553 [2] PIN  
7. 166-7871 [2] WASHER-RUBBER (52X100X8-MM THK)  
8. 285-4032 Y [2] CYLINDER GP-HOIST  
9. 6K-6967 C [2] ADAPTER-PIPE  
10. 8C-2949 [2] RING-RETAINING  
11. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
12. 8T-4779 M [2] BOLT (M16X2X35-MM)  
13. 8T-5878 M [4] BOLT (M24X3X80-MM)  
14. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
   
  164-8408 BF [4] PLATE-SPACER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41890791
 

241-4062: CYLINDER GP-HOIST

241-4062 CYLINDER GP-HOIST
S/N B1M1-UP
127-MM (5-IN) BORE X 2332-MM (91.8-IN) STROKE
PART OF 152-2703 CYLINDER & MTG GP-HOIST
ALSO AN ATTACHMENT
i02207414 SEBP4189
2414062 CYLINDER GP-HOIST Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 141-4339 [1] ROD AS  
2A. 1J-6472 [2] RING-RETAINING  
2B. 066-5815 [1] BEARING-SELF-ALIGNING  
3. 141-4343 [1] HEAD  
  225-3284 [1] SEAL-WIPER  
4. 141-4344 [1] PISTON  
5. 225-3284 [1] SEAL-WIPER  
6. 241-4063 [1] CYLINDER AS  
6A. 1J-6472 [2] RING-RETAINING  
6B. 066-5815 [1] BEARING-SELF-ALIGNING  
7. 167-2208 [1] SEAL AS-BUFFER  
8. 167-2319 [1] SEAL-U-CUP  
9. 175-7904 [1] SEAL-O-RING  
10. 2K-4096 [1] RING-BACKUP  
11. 2U-2576 [1] NUT (1-1/2-6-THD)  
12. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
13. 4J-4630 [2] RING-WEAR  
14. 8T-7584 [1] RING-WEAR  
15. 9X-7264 [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  449-6123 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
 

#SEBP41890792
 

285-4032: CYLINDER GP-HOIST

285-4032 CYLINDER GP-HOIST
S/N B1M1-UP
127-MM (5-IN) BORE X 2332-MM (92-IN) STROKE
PART OF 152-2703 CYLINDER & MTG GP-HOIST
ALSO AN ATTACHMENT
i02627175 SEBP4189
2854032 CYLINDER GP-HOIST Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-4339 [1] ROD AS  
  1J-6472 [2] RING-RETAINING  
  066-5815 [1] BEARING-SELF-ALIGNING  
2. 141-4343 [1] HEAD  
  225-3284 [1] SEAL-WIPER  
3. 312-4247 [1] SEAL-WIPER  
4. 241-4063 [1] CYLINDER AS  
  1J-6472 [2] RING-RETAINING  
  066-5815 [1] BEARING-SELF-ALIGNING  
5. 283-8468 [1] PISTON  
6. 312-4248 [1] SEAL AS-BUFFER  
7. 312-4245 [1] SEAL-U-CUP  
8. 175-7904 [1] SEAL-O-RING  
9. 2K-4096 [1] RING-BACKUP  
10. 2U-2576 [1] NUT (1-1/2-6-THD)  
11. 3S-6162 [1] WASHER-HARD (40.5X67X6-MM THK)  
12. 4J-4630 [3] RING-WEAR  
13. 8T-7584 [1] RING-WEAR (HEAD)  
14. 9X-7264 [1] SEAL AS  
 

#SEBP41890793
 

273-3266: CYLINDER GP-HYDRAULIC

273-3266 CYLINDER GP-HYDRAULIC -RH
S/N B1M1-2342
88.9-MM (3.5-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i02404889 SEBP4189
2733266 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4514 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 193-7806 I [1] HOSE AS  
12. 209-5025 [1] CYLINDER AS  
13. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 148-8364 [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
15. 289-2935 J [1] SEAL AS-BUFFER  
16. 289-2946 J [1] SEAL-U-CUP  
17. 308-1845 J [1] SEAL-WIPER  
18. 268-5823 [1] VALVE GP-RELIEF (STEERING CYLINDER)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 J [1] RING-BACKUP  
21. 4T-5613 J [1] RING-WEAR  
22. 4T-8054 J [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 J [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  228-1778 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP41890794
 

273-3267: CYLINDER GP-HYDRAULIC

273-3267 CYLINDER GP-HYDRAULIC -LH
S/N B1M1-2342
88.9-MM (3.49-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i02404892 SEBP4189
2733267 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4515 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 193-7806 I [1] HOSE AS  
12. 209-5026 [1] CYLINDER AS  
13. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 148-8364 [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
15. 289-2935 J [1] SEAL AS-BUFFER  
16. 289-2946 J [1] SEAL-U-CUP  
17. 308-1845 J [1] SEAL-WIPER  
18. 268-5823 [1] VALVE GP-RELIEF (STEERING CYLINDER)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 J [1] RING-BACKUP  
21. 4T-5613 J [1] RING-WEAR  
22. 4T-8054 J [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 J [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  228-1778 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP41890795
 

331-6041: CYLINDER GP-HYDRAULIC

331-6041 CYLINDER GP-HYDRAULIC -RH
S/N B1M2343-2713
88.9-MM (3.5-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i03099908 SEBP4189
3316041 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4514 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 209-5025 [1] CYLINDER AS  
12. 329-3030 [1] VALVE GP-RELIEF (DIRECT OPERATED)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
13. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
14. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
15. 167-2195 [1] SEAL AS-BUFFER  
16. 167-2304 [1] SEAL-U-CUP  
17. 193-7806 I [1] HOSE AS  
18. 229-9382 [1] SEAL-WIPER  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 [1] RING-BACKUP  
21. 4T-5613 [1] RING-WEAR  
22. 4T-8054 [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP41890796
 

331-6042: CYLINDER GP-HYDRAULIC

331-6042 CYLINDER GP-HYDRAULIC -LH
S/N B1M2343-2713
88.9-MM (3.5-IN) BORE X 529-MM (20.83-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i03099912 SEBP4189
3316042 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4515 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 209-5026 [1] CYLINDER AS  
12. 329-3030 [1] VALVE GP-RELIEF (DIRECT OPERATED)  
  2M-9780 [1] SEAL-O-RING  
  212-6027 [2] RING  
  212-6028 [1] SEAL-O-RING  
13. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
14. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
15. 167-2195 [1] SEAL AS-BUFFER  
16. 167-2304 [1] SEAL-U-CUP  
17. 193-7806 I [1] HOSE AS  
18. 229-9382 [1] SEAL-WIPER  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 [1] RING-BACKUP  
21. 4T-5613 [1] RING-WEAR  
22. 4T-8054 [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP41890797
 

349-8517: CYLINDER GP-HYDRAULIC

349-8517 CYLINDER GP-HYDRAULIC -RH
S/N B1M2714-UP
88.9-MM (3.5-IN) BORE X 529-MM (20.8-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i03775050 SEBP4189
3498517 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING (INNER)  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4514 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 209-5025 [1] CYLINDER AS  
12. 308-1845 [1] SEAL-WIPER  
13. 348-6977 J [1] VALVE GP-RELIEF (DIRECT OPERATED)  
14. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
15. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
16. 289-2935 [1] SEAL AS-BUFFER  
17. 289-2946 [1] SEAL-U-CUP  
18. 193-7806 I [1] HOSE AS  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 [1] RING-BACKUP  
21. 4T-5613 [1] RING-WEAR  
22. 4T-8054 [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  372-7059 J [1] KIT-SEAL (RELIEF VALVE)  
    (INCLUDES O-RING SEALS & BACK-UP RINGS)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP41890798
 

349-8518: CYLINDER GP-HYDRAULIC

349-8518 CYLINDER GP-HYDRAULIC -LH
S/N B1M2714-UP
88.9-MM (3.5-IN) BORE X 529-MM (20.8-IN) STROKE
PART OF 148-9959 CYLINDER & MTG GP-STEERING
i03775070 SEBP4189
3498518 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4M-5912 [1] SPRING (INNER)  
3. 6E-3772 [1] SPRING  
4. 141-5864 [1] BOLT (M30X3.5X90-MM)  
5. 154-6413 [1] ROD AS  
5A. 6V-5002 [1] BEARING-ALIGNING  
6. 164-5475 [1] HEAD  
7. 169-6563 [1] PISTON  
8. 179-4324 M [1] LOCKNUT (M5X0.8-THD)  
9. 191-4515 [1] MANIFOLD  
10. 204-0858 [1] VALVE  
11. 209-5026 [1] CYLINDER AS  
12. 308-1845 [1] SEAL-WIPER  
13. 348-6977 J [1] VALVE GP-RELIEF (DIRECT OPERATED)  
14. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
15. 148-8364 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
16. 289-2935 [1] SEAL AS-BUFFER  
17. 289-2946 [1] SEAL-U-CUP  
18. 193-7806 I [1] HOSE AS  
19. 2H-4145 [1] SEAL-O-RING  
20. 4J-9224 [1] RING-BACKUP  
21. 4T-5613 [1] RING-WEAR  
22. 4T-8054 [1] SEAL AS  
23. 5P-0840 [1] SEAL-O-RING  
24. 7J-9885 [1] RING-WEAR  
25. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
27. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  372-7059 J [1] KIT-SEAL (RELIEF VALVE)  
    (INCLUDES O-RING SEALS & BACK-UP RINGS)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP41890799
 

323-4207: LINES GP-CHECK VALVE

323-4207 LINES GP-CHECK VALVE
S/N B1M1-UP
HYDRAULIC OIL
FIELD INSTALLATION
i02997234 SEBP4189
3234207 LINES GP-CHECK VALVE Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 223-1353 I [3] HOSE AS  
2. 322-0596 J [1] VALVE GP-CHECK (PILOT OPERATED)  
3. 322-1453 [1] BODY  
4. 323-4814 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
5. 030-7946 [1] ELBOW  
6. 030-8193 [1] CONNECTOR  
7. 2P-1314 [1] CONNECTOR  
8. 3J-1907 [2] SEAL-O-RING  
9. 3J-7354 [1] SEAL-O-RING  
10. 3K-0360 [1] SEAL-O-RING  
11. 4J-7533 [2] SEAL-O-RING  
12. 6V-0394 [2] CONNECTOR-PORT  
13. 7J-4026 [1] ELBOW  
14. 7K-1181 [2] STRAP-CABLE  
15. 7X-2534 M [2] BOLT (M6X1X50-MM)  
16. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
18. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  323-9087 J [1] KIT-SEAL  
    (INCLUDES O-RING SEALS & BACKUP RINGS)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Hoist Cylinder Bearings - Lubricate
725 and 730 Articulated Trucks
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Applying Grease to the Hoist Cylinder Bearings{5102}
Applying Grease to the Hoist Cylinder Bearings{5102}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Hoist Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems
Cab Tilt Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems
Hoist Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
725, 730, 735, & 740 Truck Body Supports{0599, 0629, 0635, 0700, 5102, 7258}
725, 730, 735, & 740 Truck Body Supports{0599, 0629, 0635, 0700, 5102, 7258}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tailgate Cylinder - Remove and Install
730 EJECTOR and 740 EJECTOR Articulated Trucks
Service Magazine
New Recommendation for Lubrication of Bearings {4303, 5107, 7200, 7201, 7258, 7271, 7424}
New Recommendation for Lubrication of Bearings {4303, 5107, 7200, 7201, 7258, 7271, 7424}
Improved Hoist Cylinders Are Used {5102}
2006/10/30
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Hoist Cylinders that are Painted Black are Used {5102}
2011/05/20
A New Hoist Cylinder Bearing is Available From Parts Service for Certain Articulated Trucks {5102}
2014/06/23

Caterpillar Parts SIS Catalog 730 :

CYLINDER & MTG GP-HOIST
152-2703 CYLINDER & MTG GP-HOIST
CYLINDER & MTG GP-HOIST
152-2703 CYLINDER & MTG GP-HOIST
BRACKET AS-FILTER
301-1102 BRACKET AS-FILTER
ACCUMULATOR GP-HYDRAULIC
236-7796 ACCUMULATOR GP-HYDRAULIC
STEERING COLUMN GP-ADJUSTABLE
252-8050 STEERING COLUMN GP-ADJUSTABLE
PUMP GP-GEAR
255-5095 PUMP GP-GEAR
PUMP GP-GEAR
255-5095 PUMP GP-GEAR
PUMP GP-GEAR
189-6312 PUMP GP-GEAR
CYLINDER GP-HOIST
241-4062 CYLINDER GP-HOIST
CYLINDER GP-HOIST
285-4032 CYLINDER GP-HOIST
CYLINDER GP-HYDRAULIC
273-3266 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
273-3267 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
331-6041 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
331-6042 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
349-8517 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
349-8518 CYLINDER GP-HYDRAULIC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.