223-9252 CYLINDER BLOCK GP S/N TXG1-UP; B1R1-UP; LHX10176-UP PART OF 316-3534, 357-6509 ENGINE AR-CORE AN ATTACHMENT 740

Pos.	Part No	Qty	Parts name
1.	1S-9540	[1]	DOWEL
2.	4N-1650	[1]	DOWEL
3.	6I-1055	[1]	DOWEL
4.	6I-4421	[1]	PLATE-SPACER
5.	142-2329	[1]	SEAL
6.	4N-0683	[2]	DOWEL
7.	227-1204	[1]	GASKET
8.	2M-6471	[2]	PLUG-CUP
9.	266-6038	[2]	DOWEL
10.	488-1676 CY	[1]	CYLINDER BLOCK AS
11.	5P-0840	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP41920061

234-5997: CYLINDER BLOCK GP

CYLINDER BLOCK GP

234-5997 CYLINDER BLOCK GP
S/N LHX4642-10175
ACERT, 14.6 LITER
PART OF 223-9252 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i01982041 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	197-9322	[6]	LINER-CYLINDER BLOCK
2.	229-8568	[1]	CYLINDER BLOCK AS
2A.	167-8083	[14]	BOLT (7/8-14X7.5-IN)
2B.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
2C.	167-8081	[7]	CAP-CRANKSHAFT BEARING
3.	110-2220	[6]	SEAL-LINER (MIDDLE)
4.	142-6217	[6]	SEAL-O-RING (OIL)
5.	142-7072	[6]	SEAL-LINER (COOLANT)
6.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SIS WEB
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP41920062

223-7263: CYLINDER HEAD AS

223-7263 CYLINDER HEAD AS
S/N TXG1-UP; LHX1-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 243-6741 CYLINDER HEAD AS, 223-9250, 267-2060 CYLINDER HEAD GP, 20R-3290 KIT-ENGINE OVERHAUL
ALSO AN ATTACHMENT

i01877339 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
3.	280-3979	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
4.	226-5561	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	288-4883 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
5.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
8.	166-2904	[12]	SEAL-O-RING
9.	3B-0623	[17]	PLUG-CUP
10.	3B-0645	[20]	PLUG-CUP
11.	8T-6757	[3]	PLUG-PIPE
12.	9X-7430	[6]	SEAL-O-RING
13.	493-9591	[1]	HEAD-CYLINDER
	448-3297	[1]	HEAD-CYLINDER
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP41920063

243-0943: CYLINDER HEAD AS

243-0943 CYLINDER HEAD AS
S/N LHX1-18821
PART OF 243-6741 CYLINDER HEAD AS
ALSO AN ATTACHMENT

i01983776 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	152-7582	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	167-0642 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
	170-4737 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
2.	175-3617	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
	167-0643 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
	170-4738 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP41920064

243-6741: CYLINDER HEAD AS

243-6741 CYLINDER HEAD AS
S/N LHX1-2971
WITH MACHINE IN PLACE VALVE SEAT INSERTS
PART OF 223-9250, 267-2060 CYLINDER HEAD GP
ALSO AN ATTACHMENT

i01983686 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
3.	227-4239	[6]	SLEEVE-INJECTOR
4.	243-0943 Y	[1]	CYLINDER HEAD AS
			-OR-
	223-7263 Y	[1]	CYLINDER HEAD AS
5.	166-2903	[6]	SEAL-O-RING
6.	166-2904	[6]	SEAL-O-RING
7.	3B-0623	[17]	PLUG-CUP
8.	3B-0645	[20]	PLUG-CUP
9.	8T-6757	[3]	PLUG-PIPE
10.	9X-7430	[6]	SEAL-O-RING
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP41920065

281-1640: CYLINDER HEAD AS

281-1640 CYLINDER HEAD AS
S/N TXG1-UP; B1R1-UP; LHX22381-UP
PART OF 263-5055 CYLINDER HEAD GP
ALSO AN ATTACHMENT

i02411332 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
3.	300-3565	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
4.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
6.	280-3979	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
	288-4881 AB		INSERT-VALVE SEAT (INLET)(0.51-MM OS)
	288-4882 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
7.	166-2904	[12]	SEAL-O-RING
8.	3B-0623	[17]	PLUG-CUP
9.	3B-0645	[20]	PLUG-CUP
10.	8T-6757	[3]	PLUG-PIPE
11.	9X-7430	[6]	SEAL-O-RING
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP41920066

223-9250: CYLINDER HEAD GP

223-9250 CYLINDER HEAD GP
S/N LHX1-2971
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 246-8088 CYLINDER HEAD GP

i01986632 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	2A-4429	[48]	LOCK-RETAINER
2.	6I-0928	[24]	WASHER-SPECIAL
3.	153-7023	[12]	VALVE-INLET
4.	153-7024	[12]	VALVE-EXHAUST
5.	163-2478	[24]	SEAL-VALVE STEM
6.	211-3123	[24]	SPRING-VALVE (OUTER)
7.	243-6741 CY	[1]	CYLINDER HEAD AS
8.	186-2001	[24]	ROTOCOIL AS
9.	211-3122	[24]	SPRING-VALVE (INNER)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP41920067

223-9250: CYLINDER HEAD GP

223-9250 CYLINDER HEAD GP
S/N LHX2972-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 246-8088 CYLINDER HEAD GP

i02462290 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	2A-4429	[48]	LOCK-RETAINER
2.	6I-0928	[24]	WASHER-SPECIAL
3.	490-7198	[12]	VALVE-INLET
4.	490-7200	[12]	VALVE-EXHAUST
5.	163-2478	[24]	SEAL-VALVE STEM
6.	247-9908	[24]	SPRING-VALVE (OUTER)
7.	223-7263 CY	[1]	CYLINDER HEAD AS
8.	186-2001	[24]	ROTOCOIL AS
9.	211-3122	[24]	SPRING-VALVE (INNER)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP41920068

234-9185: CYLINDER HEAD GP

234-9185 CYLINDER HEAD GP
S/N TXG1-6708; LHX1-UP
PART OF 357-6509 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02840357 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK:

Pos.	Part No	Qty	Parts name
1.	263-5055 CY	[1]	CYLINDER HEAD GP
2.	224-5122	[1]	GASKET (CYLINDER HEAD)
3.	3E-6772	[24]	SEAL (WATER)
4.	6I-4025	[16]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
5.	194-8124	[6]	SLEEVE AS (EXHAUST PORT)
6.	106-5673	[10]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
7.	5P-0840	[1]	SEAL-O-RING
8.	183-3407	[3]	PLUG AS
			(EACH INCLUDES)
8A.	214-7568	[1]	SEAL-O-RING
	9S-8004	[1]	PLUG (9/16-18-THD)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP41920069

246-8088: CYLINDER HEAD GP

246-8088 CYLINDER HEAD GP
S/N LHX1-10975
PART OF 247-0730 ENGINE AR-CORE

i02042934 SEBP4192

For full view, you need register

Parts for your 740 EJECTOR TRUCK: