AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

491-8153 INSTALLATION AR-BULLDOZER -SINGLE TILT S/N WDM4593-UP AN ATTACHMENT D9R TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
LINKAGE GP

TRACK-TYPE TRACTOR D9R TRACK-TYPE TRACTOR WDM
 D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine SEBP4196 D9R WDM   (2004)

IMPLEMENTS

BULLDOZER GP
INSTALLATION AR-BULLDOZER
491-8152 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8153 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8153 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8154 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8154 INSTALLATION AR-BULLDOZER
LINK GP-STABILIZER
246-1039 LINK GP-STABILIZER
 

#SEBP41960830
 

491-8153: INSTALLATION AR-BULLDOZER

491-8153 INSTALLATION AR-BULLDOZER -SINGLE TILT
S/N WDM4593-UP
AN ATTACHMENT
i07080807 SEBP4196
4918153 INSTALLATION AR-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2472 [2] PIN  
2. 3G-7016 [2] PIN  
3. 4T-7534 [4] PIN  
4. 6I-8087 [1] BRACE AS  
4A. 7J-3297 [1] BEARING  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  7J-3296 [2] RING-LOCK  
  8P-9770 [1] PLATE  
  106-9879 [1] EYE-ROD  
5. 6J-5179 [8] RETAINER  
6. 8E-6758 [2] CONNECTOR AS  
    (EACH INCLUDES)
6A. 8E-6752 [4] BUSHING  
7. 521-8442 CY [1] CYLINDER GP-TILT  
8. 390-5422 Y [1] LINK GP-STABILIZER  
9. 424-1550 Y [1] PUSH ARM GP (LH)  
10. 424-1551 Y [1] PUSH ARM GP (RH)  
11. 491-8157 Y [1] LINES GP-TILT CYLINDER  
12. 7X-2573 M [2] BOLT (M24X3X40-MM)  
13. 7X-2574 M [14] BOLT (M24X3X45-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41960831
 

491-8154: INSTALLATION AR-BULLDOZER

491-8154 INSTALLATION AR-BULLDOZER
S/N WDM1-4587
AN ATTACHMENT
i06614152 SEBP4196
4918154 INSTALLATION AR-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2472 [2] PIN  
2. 3G-7016 [2] PIN  
3. 4T-7534 [4] PIN  
4. 6I-8087 [1] BRACE AS  
4A. 7J-3297 [1] BEARING  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  7J-3296 [2] RING-LOCK  
  8P-9770 [1] PLATE  
  106-9879 [1] EYE-ROD  
5. 6J-5179 [8] RETAINER  
6. 8E-6758 [2] CONNECTOR AS  
    (EACH INCLUDES)
6A. 8E-6752 [4] BUSHING  
7. 109-6778 Y [1] CYLINDER GP-TILT  
8. 390-5422 Y [1] LINK GP-STABILIZER  
9. 424-1550 Y [1] PUSH ARM GP (LH)  
10. 424-1551 Y [1] PUSH ARM GP (RH)  
11. 491-8158 Y [1] LINES GP-TILT CYLINDER  
12. 7X-2573 M [2] BOLT (M24X3X40-MM)  
13. 7X-2574 M [14] BOLT (M24X3X45-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41960832
 

491-8154: INSTALLATION AR-BULLDOZER

491-8154 INSTALLATION AR-BULLDOZER
S/N WDM4588-UP
AN ATTACHMENT
i07079476 SEBP4196
4918154 INSTALLATION AR-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2472 [2] PIN  
2. 3G-7016 [2] PIN  
3. 4T-7534 [4] PIN  
4. 6I-8087 [1] BRACE AS  
4A. 7J-3297 [1] BEARING  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  7J-3296 [2] RING-LOCK  
  8P-9770 [1] PLATE  
  106-9879 [1] EYE-ROD  
5. 6J-5179 [8] RETAINER  
6. 8E-6758 [2] CONNECTOR AS  
    (EACH INCLUDES)
6A. 8E-6752 [4] BUSHING  
7. 521-8442 CY [1] CYLINDER GP-TILT  
8. 390-5422 Y [1] LINK GP-STABILIZER  
9. 424-1550 Y [1] PUSH ARM GP (LH)  
10. 424-1551 Y [1] PUSH ARM GP (RH)  
11. 491-8158 Y [1] LINES GP-TILT CYLINDER  
12. 7X-2573 M [2] BOLT (M24X3X40-MM)  
13. 7X-2574 M [14] BOLT (M24X3X45-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41960833
 

246-1039: LINK GP-STABILIZER

246-1039 LINK GP-STABILIZER
S/N T9H1-UP; T9J1-UP; WDM1-UP; 9MP1-UP; 9RP1-UP
PART OF 386-9367 INSTALLATION AR-BULLDOZER, 246-1045 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i02003396 SEBP4196
2461039 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 160-6307 [2] CAP-BEARING  
3. 246-1040 [1] LINK AS  
3A. 239-4263 [2] BEARING  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41960834
 

246-1041: LINK GP-STABILIZER

246-1041 LINK GP-STABILIZER
S/N WDM1-UP
PART OF 246-1026 CYLINDER AR-TILT, 350-2595, 386-9365 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i02003811 SEBP4196
2461041 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 160-6307 [2] CAP-BEARING  
3. 246-1042 [1] LINK AS  
3A. 239-4263 [2] BEARING  
3B. 110-5887 [5] LUG  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41960835
 

390-5422: LINK GP-STABILIZER

390-5422 LINK GP-STABILIZER
S/N WDM1-UP
PART OF 491-8152, 491-8153, 491-8154 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i05522370 SEBP4196
3905422 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-8675 B [52] SHIM (0.6-MM THK)  
2. 160-6307 [2] CAP-BEARING  
3. 390-5421 [1] LINK AS  
3A. 6I-8676 [2] BEARING  
4. 7X-2578 M [8] BOLT (M24X3X200-MM)  
5. 8T-4001 M [8] NUT (M24X3-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP41960836
 

374-8316: LINKAGE GP-IMPLEMENT

374-8316 LINKAGE GP-IMPLEMENT
S/N WDM3702-UP
PART OF 378-6892 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05157823 SEBP4196
3748316 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-0145 [1] CHANNEL AS  
  1F-0750 [6] NUT-WELD (3/8-16-THD)  
  7T-1099 [2] LINK  
  9K-6034 [1] LUG  
2. 4L-6454 [3] BOLT (3/8-16X1-IN)  
3. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-1193 [5] SCREW-HEX SOCKET (3/8-16X0.625-IN)  
5. 174-5732 [1] SHAFT  
6. 1B-8704 [1] KEY-WOODRUFF  
7. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
8. 3T-9345 [1] BRACKET  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 8E-5962 [1] PLATE  
11. 7T-7921 [1] LEVER  
12. 5J-5315 [2] ROD END  
13. 8T-8932 [2] PIN AS-SPRING  
14. 4J-3044 [4] BEARING AS-NEEDLE  
15. 169-1644 [2] BOOT  
16. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
17. 121-6160 [1] HANDLE (IMPLEMENT CONTROL)  
18. 8T-0741 [8] SEAL-LIP TYPE  
19. 119-6141 [1] LEVER AS (IMPLEMENT CONTROL)  
20. 7X-0448 [1] NUT (5/8-11-THD)  
21. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
22. 8E-7034 [1] ROD  
23. 1M-1341 [2] END-YOKE ROD  
24. 8E-7364 [1] BOOT  
25. 174-5733 [1] SHAFT  
26. 8E-7033 [1] ROD  
27. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
28. 1H-1200 [1] PIN-SPRING  
29. 3E-4374 [2] STUD (3/8-24X3.15-IN)  
30. 119-7307 [1] PLATE AS  
31. 109-0628 [1] HINGE  
32. 6V-8801 [1] NUT (3/8-16-THD)  
 

#SEBP41960837
 

374-8317: LINKAGE GP-IMPLEMENT

374-8317 LINKAGE GP-IMPLEMENT
S/N NSM1-UP; WDM1-UP
PART OF 363-4433, 382-7703 CONTROL AR-HYDRAULIC IMPLEMENT, 363-4431 COUNTERWEIGHT AR, 363-4432 DRAWBAR AR, 363-4430, 382-7676 RIPPER AR-MULTISHANK, 363-4428, 363-4429 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i05157835 SEBP4196
3748317 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-5733 [1] SHAFT  
2. 174-5732 [1] SHAFT  
3. 1H-1200 [1] PIN-SPRING  
4. 8T-8932 [2] PIN AS-SPRING  
5. 8E-7364 [1] BOOT  
6. 1M-1341 [2] END-YOKE ROD  
7. 8E-7035 [1] ROD  
8. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
9. 5J-5315 [2] ROD END  
10. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
11. 9U-9337 [1] PLATE  
12. 1B-8704 [1] KEY-WOODRUFF  
13. 119-6140 [1] LEVER (RIPPER CONTROL)  
14. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
16. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
17. 6V-8801 [1] NUT (3/8-16-THD)  
18. 6T-5620 [1] LEVER  
19. 3T-9345 [1] BRACKET  
20. 2A-1736 [1] HANDLE (RIPPER CONTROL)  
21. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
22. 169-1644 [2] BOOT  
23. 4J-3044 [4] BEARING AS-NEEDLE  
24. 217-2084 [1] ROD  
25. 8T-0741 [8] SEAL-LIP TYPE  
26. 6V-1193 [5] SCREW-HEX SOCKET (3/8-16X0.625-IN)  
27. 1B-4430 [2] NUT-JAM (1/2-20-THD)  
28. 119-7308 [1] PLATE AS  
  122-6133 [2] WASHER (CURVED SPRING)  
  109-0628 [1] HINGE  
29. 3E-4374 [2] STUD (3/8-24X3.15-IN)  
 

#SEBP41960838
 

384-7048: LINKAGE GP-IMPLEMENT

384-7048 LINKAGE GP-IMPLEMENT
S/N WDM3000-UP
PART OF 384-4199 CONTROL AR-DUAL TILT
AN ATTACHMENT
i04712524 SEBP4196
3847048 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-6141 [1] LEVER AS  
2. 119-7307 [1] PLATE AS  
  122-6133 [2] WASHER (CURVED SPRING)  
3. 5P-6003 D TUBE (1-M)  
5. 3E-8680 Y [1] SWITCH GP-HANDLE (DUAL TILT CONTROL)  
6. 3T-9345 [1] BRACKET  
7. 5J-5315 [2] ROD END  
8. 7T-0145 [1] CHANNEL AS  
  1F-0750 [6] NUT-WELD (3/8-16-THD)  
9. 8E-5962 [1] PLATE  
10. 8E-7033 [1] ROD  
11. 8E-7034 [1] ROD  
12. 8E-7364 [1] BOOT  
13. 9W-2381 [1] ADAPTER  
14. 103-8120 [1] HARNESS AS-WIRING (DUAL TILT CONTROL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
15. 121-9842 [2] PIN AS-SPRING  
16. 169-1644 [2] BOOT  
17. 174-5732 [1] SHAFT  
18. 174-5733 [1] SHAFT  
19. 1A-9252 [2] END-ADJUSTMENT ROD  
20. 1B-8704 [1] KEY-WOODRUFF  
21. 1H-1200 [1] PIN-SPRING  
22. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
23. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
24. 3E-4374 [2] STUD (3/8-24X3.15-IN)  
25. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
26. 4J-3044 [4] BEARING AS-NEEDLE  
27. 4L-6454 [3] BOLT (3/8-16X1-IN)  
28. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
30. 6V-1193 [5] SCREW-HEX SOCKET (3/8-16X0.625-IN)  
31. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
32. 6V-8801 [1] NUT (3/8-16-THD)  
33. 7K-1181 [2] STRAP-CABLE  
34. 7T-7921 [1] LEVER  
35. 7X-0448 [1] NUT (5/8-11-THD)  
36. 8C-8514 [2] SCREW-MACHINE (8-32X0.375-IN)  
37. 8T-0741 [8] SEAL-LIP TYPE  
38. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
39. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP41960839
 

385-8540: LINKAGE GP-IMPLEMENT

385-8540 LINKAGE GP-IMPLEMENT -BULLDOZER
S/N WDM3000-UP
PART OF 384-4200 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i04712389 SEBP4196
3858540 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-0145 [1] CHANNEL AS  
  1F-0750 [6] NUT-WELD (3/8-16-THD)  
2. 4L-6454 [3] BOLT (3/8-16X1-IN)  
3. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-1193 [5] SCREW-HEX SOCKET (3/8-16X0.625-IN)  
5. 174-5732 [1] SHAFT  
6. 1B-8704 [1] KEY-WOODRUFF  
7. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
8. 3T-9345 [1] BRACKET  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 8E-5962 [1] PLATE  
11. 7T-7921 [1] LEVER  
12. 5J-5315 [2] ROD END  
13. 121-9842 [2] PIN AS-SPRING  
14. 4J-3044 [4] BEARING AS-NEEDLE  
15. 169-1644 [2] BOOT  
16. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
17. 121-6160 [1] HANDLE (IMPLEMENT CONTROL)  
18. 8T-0741 [8] SEAL-LIP TYPE  
19. 119-6141 [1] LEVER AS (IMPLEMENT CONTROL)  
20. 7X-0448 [1] NUT (5/8-11-THD)  
21. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
22. 8E-7034 [1] ROD  
23. 1A-9252 [2] END-ADJUSTMENT ROD  
24. 8E-7364 [1] BOOT  
25. 174-5733 [1] SHAFT  
26. 8E-7033 [1] ROD  
27. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 1H-1200 [1] PIN-SPRING  
29. 3E-4374 [2] STUD (3/8-24X3.15-IN)  
30. 119-7307 [1] PLATE AS  
  109-0628 [1] HINGE  
  122-6133 [2] WASHER (CURVED SPRING)  
31. 6V-8801 [1] NUT (3/8-16-THD)  
 

Information:

Special Instruction
Installation of 9SU (1LP) and 9U (1MP) Bulldozers{6051, 6053}
Installation of 9SU (1LP) and 9U (1MP) Bulldozers{6051, 6053}

Caterpillar Parts SIS Catalog D9R :

INSTALLATION AR-BULLDOZER
491-8153 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8152 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8152 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
386-9367 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
386-9366 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
386-9365 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
386-9364 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
350-2595 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8154 INSTALLATION AR-BULLDOZER
INSTALLATION AR-BULLDOZER
491-8154 INSTALLATION AR-BULLDOZER
LINK GP-STABILIZER
246-1039 LINK GP-STABILIZER
LINK GP-STABILIZER
246-1041 LINK GP-STABILIZER
LINK GP-STABILIZER
390-5422 LINK GP-STABILIZER
LINKAGE GP-IMPLEMENT
374-8316 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
374-8317 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
384-7048 LINKAGE GP-IMPLEMENT

Truck sale:

 
 
Caterpillar D9R
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D9R, Crawler dozers, Construction
276,938 
Caterpillar D9R, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D 9 R, Crawler dozers, Construction
260,000 
Caterpillar D 9 R, Crawler dozers, Construction

MOHAMED ABDULRAHMAN AL-BAHAR
Caterpillar D9R, Rupsdozers, Bouw
132.000 
Caterpillar D9R, Rupsdozers, Bouw

CLEVELAND BROTHERS EQUIPMENT COMPANY INC
 
 
Caterpillar D9R MS RIP, Aufreisser, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.