AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

448-2133 CASE GP-TRANSMISSION S/N SNL4966-UP PART OF 448-2131 CASE & PARTS GP-PLANETARY AN ATTACHMENT 428E


POWER TRAIN
TRANSMISSION GP
CLUTCH GP
CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP

BACKHOE LOADER 428E BACKHOE LOADER SNL
 428E Backhoe Loader Parallel Lift SNL00001-UP (MACHINE) POWERED BY 3054C Engine SEBP4199 428E SNL   (2005)

POWER TRAIN

TRANSMISSION GP
CASE AS-TRANSMISSION
275-0470 CASE AS-TRANSMISSION
CASE GP-TRANSMISSION
448-2132 CASE GP-TRANSMISSION
CASE GP-TRANSMISSION
448-2133 CASE GP-TRANSMISSION
CLUTCH GP
448-2134 CLUTCH GP
MOUNTING GP-TRANSMISSION
271-4487 MOUNTING GP-TRANSMISSION
SHAFT GP-INPUT
275-0476 SHAFT GP-INPUT
 

#SEBP41990230
 

448-2133: CASE GP-TRANSMISSION

448-2133 CASE GP-TRANSMISSION
S/N SNL4966-UP
PART OF 448-2131 CASE & PARTS GP-PLANETARY
AN ATTACHMENT
i06086897 SEBP4199
4482133 CASE GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
3. 7T-3251 [1] BREATHER (TRANSMISSION)  
4. 123-2918 [2] SLEEVE  
5. 123-2919 M [2] NUT (M11X1-THD)  
6. 237-5186 [1] PLATE-IDENTIFICATION (TRANSMISSION)  
7. 275-0470 Y [1] CASE AS-TRANSMISSION (REAR)  
8. 293-2147 [1] BREATHER AS (TRANSMISSION)  
  3J-1907 [1] SEAL-O-RING  
  122-6785 [1] PLUG AS  
9. 294-9820 [1] TUBE  
10. 334-5131 [4] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
11. 336-5469 [4] RIVET  
12. 391-5919 [1] PLUG  
13. 391-5920 [1] WASHER (15.9X20.2X1.6-MM THK)  
14. 449-8818 M [14] BOLT (M10X1.5X40-MM)  
15. 3J-1907 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41990231
 

448-2134: CLUTCH GP

448-2134 CLUTCH GP
S/N SNL4966-UP
PART OF 294-9815 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05833276 SEBP4199
4482134 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-1883 [1] SPACER (38X45X5-MM THK)  
2. 305-3427 Y [1] SHAFT GP-OUTPUT (FRONT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41990232
 

448-2135: CONTROL GP-TRANSMISSION HYD

448-2135 CONTROL GP-TRANSMISSION HYD
S/N SNL4966-UP
PART OF 294-9815 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05841913 SEBP4199
4482135 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 330-3037 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
2. 147-0209 Y [1] VALVE GP-RELIEF (TRANSMISSION)  
3. 380-9030 [1] VALVE GP-SOLENOID (12-VOLT)(ALL WHEEL DRIVE)  
3A. 380-9030 [1] VALVE GP-SOLENOID (12-VOLT)(DIFFERENTIAL LOCK)  
    (EACH SOLENOID VALVE GP INCLUDES)
  274-8034 [1] COIL AS (12-VOLT)  
4. 324-2578 Y [1] VALVE GP-SOLENOID (12-VOLT)(FORWARD, REVERSE)  
5. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41990233
 

209-9882: DIFFERENTIAL & BEVEL GEAR GP

209-9882 DIFFERENTIAL & BEVEL GEAR GP -FRONT
S/N SNL1-UP
PART OF 230-5743 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
i01858354 SEBP4199
2099882 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-0520 [1] SEAL-O-RING  
2. 216-4457 [1] SEAL  
3. 216-4458 [2] BEARING  
4. 136-7808 [1] BEARING AS-TAPERED ROLLER  
5. 216-4461 [1] BEARING  
6. 209-7454 M [2] NUT (M94X2-THD)  
7. 152-6144 [1] PLUG AS-DRAIN (MAGNETIC)(AXLE, FRONT)  
  6V-6228 [1] SEAL-O-RING  
8. 209-7462 [2] WASHER (40X50X2-MM THK)  
9. 209-7463 [1] SLEEVE  
10. 199-0695 M [2] BOLT (M6X1X14-MM)  
11. 209-7472 M [1] NUT (M24X1.5-THD)  
12. 209-7473 B [1] SHIM (2.5-MM THK)  
  219-8751 B [1] SHIM (2.6-MM THK)  
  219-8752 B [1] SHIM (2.7-MM THK)  
  219-8753 B [1] SHIM (2.8-MM THK)  
  219-8754 B [1] SHIM (2.9-MM THK)  
  219-8755 B [1] SHIM (3-MM THK)  
  219-8756 B [1] SHIM (3.1-MM THK)  
  219-8757 B [1] SHIM (3.2-MM THK)  
  219-8758 B [1] SHIM (3.3-MM THK)  
  219-8759 B [1] SHIM (3.4-MM THK)  
13. 216-4465 [1] WASHER (24.5X52X10-MM THK)  
14. 216-4464 [1] YOKE  
15. 199-0858 [2] RETAINER  
16. 216-4466 [1] KIT-BEVEL GEAR & PINION  
    (INCLUDES SPACER, NUT, WASHERS, O-RING SEAL & BEVEL GEAR AS)
17. 216-9498 Y [1] DIFFERENTIAL GP (AXLE, FRONT)  
18. 208-0322 [4] BOLT-FLANGE HEAD (M14X2X75-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41990234
 

238-5298: DIFFERENTIAL & BEVEL GEAR GP

238-5298 DIFFERENTIAL & BEVEL GEAR GP -REAR
S/N SNL1-UP
PART OF 230-5738 AXLE GP-REAR
AN ATTACHMENT
i02151233 SEBP4199
2385298 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-0674 M [4] BOLT-SOCKET HEAD (M12X1.75X65-MM)  
2. 199-0656 [2] BEARING-TAPERED ROLLER  
3. 199-0663 L [1] SEAL-O-RING  
4. 198-7811 [2] DOWEL  
5. 199-0675 M [2] NUT (M104X2-THD)  
6. 199-0678 L [2] WASHER (45.5X55X2-MM THK)  
7. 199-0680 L [1] SPACER (47X50X19.2-MM THK)  
8. 199-0695 M [2] BOLT (M6X1X14-MM)  
9. 199-0697 [1] SEAL  
10. 199-0785 L [1] WASHER (30.5X58X10-MM THK)  
11. 217-2346 L [1] KIT-BEVEL GEAR & PINION  
    (ALSO INCLUDES BEVEL GEAR & PINION)
12. 199-0858 [2] RETAINER  
13. 212-5702 LM [1] NUT (M30X2-THD)  
14. 216-1600 [1] DISC-BRAKE  
15. 095-1041 [1] BEARING-TAPERED ROLLER  
16. 093-8828 [1] BEARING AS  
17. 216-1612 Y [1] CYLINDER GP-BRAKE (LH)  
18. 216-1613 Y [1] CYLINDER GP-BRAKE (RH)  
19. 219-8836 [1] FORK  
20. 231-0692 Y [1] DIFFERENTIAL GP (AXLE, REAR)  
21. 238-5290 [1] HOUSING-CENTER  
22. 1U-8846 B SEALANT-GASKET  
23. 199-0684 B [1] SHIM (2.5-MM THK)  
24. 199-0685 B [1] SHIM (2.6-MM THK)  
25. 199-0686 B [1] SHIM (2.7-MM THK)  
26. 199-0687 B [1] SHIM (2.8-MM THK)  
27. 199-0688 B [1] SHIM (2.9-MM THK)  
28. 199-0689 B [1] SHIM (3-MM THK)  
29. 199-0690 B [1] SHIM (3.1-MM THK)  
30. 199-0691 B [1] SHIM (3.2-MM THK)  
31. 199-0692 B [1] SHIM (3.3-MM THK)  
32. 199-0693 B [1] SHIM (3.4-MM THK)  
   
  199-0808 FJ [1] PIN  
  231-0670 FJ [1] SHAFT  
  231-0671 FJ [2] WASHER-THRUST  
  231-0695 FJ [2] WASHER-THRUST  
   
    AVAILABLE REPAIR KIT(S):
  217-2345 J [1] KIT-DIFFERENTIAL  
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41990235
 

238-5298: DIFFERENTIAL & BEVEL GEAR GP

238-5298 DIFFERENTIAL & BEVEL GEAR GP -REAR
S/N SNL1-5514
PART OF 230-5738 AXLE GP-REAR
AN ATTACHMENT
i04887275 SEBP4199
2385298 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-0674 M [4] BOLT-SOCKET HEAD (M12X1.75X65-MM)  
2. 199-0656 [2] BEARING-TAPERED ROLLER  
3. 199-0663 L [1] SEAL-O-RING  
4. 198-7811 [2] DOWEL  
5. 199-0675 M [2] NUT (M104X2-THD)  
6. 199-0678 L [2] WASHER (45.5X55X2-MM THK)  
7. 199-0680 L [1] SPACER (47X50X19.2-MM THK)  
8. 199-0695 M [2] BOLT (M6X1X14-MM)  
9. 199-0697 [1] SEAL  
10. 199-0785 L [1] WASHER (30.5X58X10-MM THK)  
11. 217-2346 L [1] KIT-BEVEL GEAR & PINION  
    (ALSO INCLUDES BEVEL GEAR & PINION)
12. 199-0858 [2] RETAINER  
13. 212-5702 LM [1] NUT (M30X2-THD)  
14. 216-1600 [1] DISC-BRAKE  
15. 095-1041 [1] BEARING-TAPERED ROLLER  
16. 093-8828 [1] BEARING AS  
17. 216-1612 Y [1] CYLINDER GP-BRAKE (LH)  
18. 216-1613 Y [1] CYLINDER GP-BRAKE (RH)  
19. 219-8836 [1] FORK  
20. 359-0422 CY [1] DIFFERENTIAL GP (AXLE, REAR)  
21. 238-5290 [1] HOUSING-CENTER  
22. 1U-8846 B SEALANT-GASKET  
23. 199-0684 B [1] SHIM (2.5-MM THK)  
  199-0685 B [1] SHIM (2.6-MM THK)  
  199-0686 B [1] SHIM (2.7-MM THK)  
  199-0687 B [1] SHIM (2.8-MM THK)  
  199-0688 B [1] SHIM (2.9-MM THK)  
  199-0689 B [1] SHIM (3-MM THK)  
  199-0690 B [1] SHIM (3.1-MM THK)  
  199-0691 B [1] SHIM (3.2-MM THK)  
  199-0692 B [1] SHIM (3.3-MM THK)  
  199-0693 B [1] SHIM (3.4-MM THK)  
33. 217-2345 [1] KIT-DIFFERENTIAL (RIGHT AXLE HOUSING)  
  199-0808 [1] PIN  
  231-0670 [1] SHAFT  
  231-0671 [2] WASHER-THRUST  
  231-0695 [2] WASHER-THRUST  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41990236
 

238-5302: DIFFERENTIAL & BEVEL GEAR GP

238-5302 DIFFERENTIAL & BEVEL GEAR GP
S/N SNL1-UP
PART OF 244-8657 AXLE GP-REAR
AN ATTACHMENT
i02213839 SEBP4199
2385302 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-0674 M [4] BOLT-SOCKET HEAD (M12X1.75X65-MM)  
2. 199-0656 [2] BEARING-TAPERED ROLLER  
3. 199-0663 J [1] SEAL-O-RING  
4. 198-7811 [2] DOWEL  
5. 199-0675 M [2] NUT (M104X2-THD)  
6. 199-0678 J [2] WASHER (45.5X55X2-MM THK)  
7. 199-0680 J [1] SPACER (47X50X19.2-MM THK)  
8. 199-0695 M [2] BOLT (M6X1X14-MM)  
9. 199-0697 [1] SEAL  
10. 199-0785 J [1] WASHER (30.5X58X10-MM THK)  
11. 217-2346 J [1] KIT-BEVEL GEAR & PINION  
    (ALSO INCLUDES PINION & BEVEL GEAR)
12. 199-0858 [2] RETAINER  
13. 212-5702 JM [1] NUT (M30X2-THD)  
14. 216-1600 [1] DISC-BRAKE  
15. 095-1041 [1] BEARING-TAPERED ROLLER  
16. 093-8828 [1] BEARING AS  
17. 216-1612 Y [1] CYLINDER GP-BRAKE (RH)  
18. 216-1613 Y [1] CYLINDER GP-BRAKE (LH)  
19. 238-5290 [1] HOUSING-CENTER  
20. 238-5303 Y [1] DIFFERENTIAL GP  
21. 1U-8846 B SEALANT-GASKET  
22. 199-0684 B [1] SHIM (2.5-MM THK)  
23. 199-0685 B [1] SHIM (2.6-MM THK)  
24. 199-0686 B [1] SHIM (2.7-MM THK)  
25. 199-0687 B [1] SHIM (2.8-MM THK)  
26. 199-0688 B [1] SHIM (2.9-MM THK)  
27. 199-0689 B [1] SHIM (3-MM THK)  
28. 199-0690 B [1] SHIM (3.1-MM THK)  
29. 199-0691 B [1] SHIM (3.2-MM THK)  
30. 199-0692 B [1] SHIM (3.3-MM THK)  
31. 199-0693 B [1] SHIM (3.4-MM THK)  
   
  199-0808 FL [1] PIN  
  231-0670 FL [1] SHAFT  
  231-0671 FL [2] WASHER-THRUST  
  231-0695 FL [2] WASHER-THRUST  
   
    AVAILABLE REPAIR KIT(S):
  217-2345 L [1] KIT-DIFFERENTIAL  
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41990237
 

216-9498: DIFFERENTIAL GP

216-9498 DIFFERENTIAL GP -AXLE, FRONT
S/N SNL1-UP
PART OF 209-9882 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
i02005424 SEBP4199
2169498 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-0092 J [2] WASHER-THRUST (22X42X2-MM THK)  
2. 209-7455 J [1] PIN  
3. 216-8687 [1] COVER  
4. 216-9497 [1] DIFFERENTIAL & BEVEL GEAR GP  
5. 216-8689 [1] HOUSING-DIFFERENTIAL  
6. 216-8691 J [1] RETAINER  
7. 229-5093 J [2] WASHER-THRUST (49X72X1.5-MM THK)  
8. 144-6734 M [12] BOLT (M10X1.5X30-MM)  
   
    AVAILABLE REPAIR KIT(S):
  216-8700 J [1] KIT-DIFFERENTIAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP41990238
 

231-0692: DIFFERENTIAL GP

231-0692 DIFFERENTIAL GP -AXLE, REAR
S/N SNL1-UP
PART OF 238-5298 DIFFERENTIAL & BEVEL GEAR GP
FIELD REPLACEMENT ORDER @@@@@359-0422@@@@@
AN ATTACHMENT
i02188622 SEBP4199
2310692 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-0673 [2] BUSHING  
2. 478-7029 M [12] BOLT (M14X2-THD)  
3. 199-0756 [1] COLLAR  
4. 479-0970 [1] COVER-DIFFERENTIAL  
5. 199-0807 [4] PIN (DIFFERENTIAL LOCK)  
6. 199-0808 [3] PIN  
7. 231-0670 [1] SHAFT  
8. 231-0671 [4] WASHER-THRUST  
9. 231-0695 [2] WASHER-THRUST  
10. 479-0971 [1] CASE-DIFFERENTIAL  
11. 231-0696 [2] SHAFT  
12. 231-0697 [1] RETAINER  
13. 422-0927 [1] GEAR AS  
14. 199-0659 [4] SEAL-PIN  
15. 198-7811 [2] DOWEL  
  M   METRIC PART
 

#SEBP41990239
 

238-5303: DIFFERENTIAL GP

238-5303 DIFFERENTIAL GP
S/N SNL1-UP
PART OF 238-5302 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
i02215755 SEBP4199
2385303 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-0673 [2] BUSHING  
2. 199-0694 M [12] BOLT (M14X2X40-MM)  
3. 199-0784 [1] COVER-DIFFERENTIAL  
4. 199-0808 [3] PIN  
5. 231-0670 [1] SHAFT  
6. 231-0671 [4] WASHER-THRUST  
7. 231-0695 [2] WASHER-THRUST  
8. 231-0693 [1] CASE-DIFFERENTIAL  
9. 231-0696 [2] SHAFT  
10. 231-0697 [1] RETAINER  
11. 253-4974 [1] GEAR AS-DIFFERENTIAL  
  M   METRIC PART
 

Information:

Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 428E :

CASE GP-TRANSMISSION
448-2132 CASE GP-TRANSMISSION
CASE AS-TRANSMISSION
275-0470 CASE AS-TRANSMISSION
CASE AS-TRANSMISSION
275-0468 CASE AS-TRANSMISSION
CASE AS-TRANSMISSION
275-0467 CASE AS-TRANSMISSION
CASE & PARTS GP-PLANETARY
448-2131 CASE & PARTS GP-PLANETARY
AXLE GP-REAR
244-8657 AXLE GP-REAR
AXLE GP-REAR
230-5738 AXLE GP-REAR
AXLE GP-REAR
230-5738 AXLE GP-REAR
CLUTCH GP
448-2134 CLUTCH GP
CONTROL GP-TRANSMISSION HYD
448-2135 CONTROL GP-TRANSMISSION HYD
DIFFERENTIAL & BEVEL GEAR GP
209-9882 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
238-5298 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
238-5298 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
238-5302 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
216-9498 DIFFERENTIAL GP
DIFFERENTIAL GP
231-0692 DIFFERENTIAL GP

Truck sale:

Caterpillar 428E
 
Caterpillar 428E
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
Caterpillar 428E
 
Caterpillar 428E
- backhoe loader
BERGERAT MONNOYEUR ROMANIA
Caterpillar 428E, backhoe loader, Construction
 
Caterpillar 428E, backhoe loader, Construction

BERGERAT MONNOYEUR SP. Z O.O.
Caterpillar 428E, graaf-laadcombinaties, Bouw
27.850 
Caterpillar 428E, graaf-laadcombinaties, Bouw

BERGERAT MONNOYEUR SP. Z O.O.
 
27.561 
Caterpillar 428E SPECIAL99, baggerlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.