AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

385C L Excavator JCM00001-UP (MACHINE) POWERED BY C-18 Engine BASIC ENGINE Caterpillar SIS



EXCAVATOR 385C EXCAVATOR JCM
 385C L Excavator JCM00001-UP (MACHINE) POWERED BY C-18 Engine SEBP4203 385C JCM   (2003)

Parts group 385C:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
234-7935 CAMSHAFT GP
234-7935 CAMSHAFT GP
S/N TXH1-UP; RHX1-UP
PART OF 241-5933, 280-2166, 356-2365 ENGINE AR-CORE
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
S/N TXH1-UP; RHX1-UP
DUAL CAM SENSORS
PART OF 207-0449 GEAR GP-FRONT
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
S/N RHX1-2620
PART OF 257-4960 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
S/N TXH1-5297; RHX2621-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR & COMPR
460-4661 MOUNTING GP-ALTERNATOR & COMPR
460-4661 MOUNTING GP-ALTERNATOR & COMPR
S/N TXH5298-UP
PART OF 286-9798 ENGINE AR-COMPLETE
CRANKSHAFT GP
CRANKSHAFT GP
223-9732 CRANKSHAFT GP
223-9732 CRANKSHAFT GP
S/N TXH1-UP; RHX1-UP
PART OF 241-5933, 280-2166, 356-2365 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N TXH1-UP; RHX1-UP
PART OF 223-9732 CRANKSHAFT GP
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
107-6736 COVER GP-CYLINDER BLOCK
107-6736 COVER GP-CYLINDER BLOCK
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
107-6737 COVER GP-CYLINDER BLOCK
107-6737 COVER GP-CYLINDER BLOCK
S/N TXH3151-UP
PART OF 286-9798 ENGINE AR-COMPLETE
CANNOT BE USED WITH RIGHT SIDE OIL FILLER
COVER GP-CYLINDER BLOCK
229-5519 COVER GP-CYLINDER BLOCK
229-5519 COVER GP-CYLINDER BLOCK
S/N RHX1-900
PART OF 257-4960 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
229-5519 COVER GP-CYLINDER BLOCK
229-5519 COVER GP-CYLINDER BLOCK
S/N TXH1-UP; RHX901-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
CYLINDER BLOCK AS
229-8568 CYLINDER BLOCK AS
229-8568 CYLINDER BLOCK AS
S/N RHX1-UP
PART OF 261-0052 CYLINDER BLOCK AS
CYLINDER BLOCK AS
261-0052 CYLINDER BLOCK AS
261-0052 CYLINDER BLOCK AS
S/N RHX1-UP
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
S/N TXH1-UP; RHX1-UP
PART OF 301-3018, 323-8451 CYLINDER BLOCK AS
CYLINDER BLOCK AS
301-3018 CYLINDER BLOCK AS
301-3018 CYLINDER BLOCK AS
S/N RHX1-5238
PART OF 261-0191 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@323-8451@@@@@
CYLINDER BLOCK AS
323-8451 CYLINDER BLOCK AS
323-8451 CYLINDER BLOCK AS
S/N TXH1-UP; RHX4918-UP
PART OF 261-0191 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@301-3018@@@@@
CYLINDER BLOCK AS
357-1320 CYLINDER BLOCK AS
357-1320 CYLINDER BLOCK AS
S/N TXH1128-UP
PART OF 358-6883 CYLINDER BLOCK GP
CYLINDER BLOCK AS
488-1677 CYLINDER BLOCK AS
488-1677 CYLINDER BLOCK AS
S/N TXH1-UP
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER BLOCK AS
555-8793 CYLINDER BLOCK AS
555-8793 CYLINDER BLOCK AS
S/N TXH1-UP
PART OF 261-0191, 358-6883 CYLINDER BLOCK GP
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N RHX1-4917
PART OF 241-5933, 280-2166 ENGINE AR-CORE
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N RHX4918-5238
PART OF 241-5933 ENGINE AR-CORE
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N TXH1-UP; RHX5239-UP
PART OF 241-5933 ENGINE AR-CORE
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N TXH1-UP
PART OF 241-5933 ENGINE AR-CORE
Type 1
CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
261-0191 CYLINDER BLOCK GP
S/N TXH1-UP
PART OF 241-5933 ENGINE AR-CORE
Type 2
CYLINDER BLOCK GP
358-6883 CYLINDER BLOCK GP
358-6883 CYLINDER BLOCK GP
S/N TXH1128-UP
PART OF 356-2365 ENGINE AR-CORE
Type 1
CYLINDER BLOCK GP
358-6883 CYLINDER BLOCK GP
358-6883 CYLINDER BLOCK GP
S/N TXH1128-UP
PART OF 356-2365 ENGINE AR-CORE
Type 2
PLUG GP-CYLINDER BLOCK
229-6709 PLUG GP-CYLINDER BLOCK
229-6709 PLUG GP-CYLINDER BLOCK
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
S/N TXH1-UP; RHX1-UP
PART OF 261-0191 CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
S/N RHX1-UP
WITH PREFINISHED VALVE SEAT INSERTS
PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
S/N RHX1-UP
PART OF 243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
S/N RHX1-1594
WITH MACHINE IN PLACE VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
S/N TXH1-UP; RHX4127-UP
PART OF 263-5055, 432-5470 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N RHX1-1594
PART OF 235-2974 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N RHX1595-UP
PART OF 235-2974 CYLINDER HEAD GP
CYLINDER HEAD GP
235-2974 CYLINDER HEAD GP
235-2974 CYLINDER HEAD GP
S/N RHX1-4126
PART OF 241-5933, 280-2166 ENGINE AR-CORE
CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
S/N TXH1-UP; RHX4127-UP
PART OF 274-1953 CYLINDER HEAD GP
CYLINDER HEAD GP
274-1953 CYLINDER HEAD GP
274-1953 CYLINDER HEAD GP
S/N TXH1-UP; RHX4127-UP
PART OF 241-5933 ENGINE AR-CORE
CYLINDER HEAD GP
432-5470 CYLINDER HEAD GP
432-5470 CYLINDER HEAD GP
S/N TXH1128-UP
PART OF 432-5472 CYLINDER HEAD GP
CYLINDER HEAD GP
432-5472 CYLINDER HEAD GP
432-5472 CYLINDER HEAD GP
S/N TXH1128-UP
PART OF 356-2365 ENGINE AR-CORE
PLUG GP-CYLINDER HEAD
230-4646 PLUG GP-CYLINDER HEAD
230-4646 PLUG GP-CYLINDER HEAD
S/N RHX1-5375
PART OF 257-4960 ENGINE AR-COMPLETE
PLUG GP-CYLINDER HEAD
282-3645 PLUG GP-CYLINDER HEAD
282-3645 PLUG GP-CYLINDER HEAD
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
DAMPER GP
DAMPER & PULLEY GP
212-2113 DAMPER & PULLEY GP
212-2113 DAMPER & PULLEY GP
S/N TXH1-UP; RHX1-UP
8 GROOVE, 241.3MM DIAMETER PULLEY
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
DRIVE GP-FAN
DRIVE GP-FAN
200-3313 DRIVE GP-FAN
200-3313 DRIVE GP-FAN
S/N SBE1-UP; JCM1-UP
PART OF 210-8156 COOLER & MTG GP-HYDRAULIC OIL, 230-2799 FAN GP-SUCTION
FIELD REPLACEMENT ORDER @@@@@295-9637@@@@@
DRIVE GP-FAN
295-9637 DRIVE GP-FAN
295-9637 DRIVE GP-FAN
S/N SBE354-UP; JCM1-UP
PART OF 210-8156 COOLER & MTG GP-HYDRAULIC OIL, 230-2799 FAN GP-SUCTION
FIELD REPLACEMENT FOR @@@@@200-3313@@@@@
DRIVE GP-PUMP
ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
S/N TXH1-UP; RHX1-UP
PART OF 6I-3638 DRIVE GP-PUMP
ENGINE GP
468-8558 KIT-ENGINE GASKET
468-8558 KIT-ENGINE GASKET
S/N SBE1-UP; JCM1-UP
FRONT STRUCTURE
FIELD INSTALLATION
494-7134 KIT-ENGINE GASKET
494-7134 KIT-ENGINE GASKET
S/N SBE1-UP; JCM1-UP
CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE OIL PAN. INTERNAL OIL PUMP AND BLOCK COVERS
FOR USE WITH @@@@@257-4960@@@@@
FIELD INSTALLATION
FLYWHEEL GP
FLYWHEEL GP
194-7097 FLYWHEEL GP
194-7097 FLYWHEEL GP
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
GEAR GP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
S/N TXH1-UP; RHX1-UP
DUAL CAM SENSORS
PART OF 207-0449 GEAR GP-FRONT
GEAR GP-FRONT
207-0449 GEAR GP-FRONT
207-0449 GEAR GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 241-5933, 280-2166, 356-2365 ENGINE AR-CORE
GEAR GP-REAR
4P-9823 GEAR GP-REAR
4P-9823 GEAR GP-REAR
S/N RHX1-1593
PART OF 257-4960 ENGINE AR-COMPLETE
GEAR GP-REAR
4P-9823 GEAR GP-REAR
4P-9823 GEAR GP-REAR
S/N TXH1-UP; RHX1594-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
HOUSING GP-FRONT
241-0164 HOUSING GP-FRONT
241-0164 HOUSING GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
HOUSING GP-FRONT
241-0478 HOUSING GP-FRONT
241-0478 HOUSING GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 241-0164 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
351-0059 HOUSING GP-FLYWHEEL
351-0059 HOUSING GP-FLYWHEEL
S/N TXH1-UP; RHX1-UP
PART OF 7E-8996 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
420-2860 HOUSING GP-FLYWHEEL
420-2860 HOUSING GP-FLYWHEEL
S/N TXH4083-UP
BY MACHINING THE PTO PADS TO ALLOW FOR THRUSH PLATES TO BE ADDED
PART OF 420-2862 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
420-2862 HOUSING GP-FLYWHEEL
420-2862 HOUSING GP-FLYWHEEL
S/N TXH4083-UP
BY MACHINING THE PTO PADS TO ALLOW FOR THRUSH PLATES TO BE ADDED
PART OF 420-2863 HOUSING GP-FLYWHEEL
Type 1
HOUSING GP-FLYWHEEL
420-2862 HOUSING GP-FLYWHEEL
420-2862 HOUSING GP-FLYWHEEL
S/N TXH4083-UP
BY MACHINING THE PTO PADS TO ALLOW FOR THRUSH PLATES TO BE ADDED
PART OF 420-2863 HOUSING GP-FLYWHEEL
Type 2
HOUSING GP-FLYWHEEL
420-2863 HOUSING GP-FLYWHEEL
420-2863 HOUSING GP-FLYWHEEL
S/N TXH4083-UP
INCLUDES THE PTO PADS MACHINED TO ALLOW THRUSH PLATES TO BE ADDED
PART OF 286-9798 ENGINE AR-COMPLETE
HOUSING GP-FLYWHEEL
7E-8996 HOUSING GP-FLYWHEEL
7E-8996 HOUSING GP-FLYWHEEL
S/N RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
HOUSING GP-FLYWHEEL
7E-8996 HOUSING GP-FLYWHEEL
7E-8996 HOUSING GP-FLYWHEEL
S/N TXH1-UP; RHX1-9534
PART OF 286-9798 ENGINE AR-COMPLETE
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
120-9847 COVER GP-FRONT HOUSING
120-9847 COVER GP-FRONT HOUSING
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
S/N TXH1-UP; RHX1-UP
CAM AND IDLER GEAR ACCESS
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
FASTENER GP-FRONT HOUSING
221-1428 FASTENER GP-FRONT HOUSING
221-1428 FASTENER GP-FRONT HOUSING
S/N TXH1-5297; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
FASTENER GP-FRONT HOUSING
390-7862 FASTENER GP-FRONT HOUSING
390-7862 FASTENER GP-FRONT HOUSING
S/N TXH2727-UP
PART OF 286-9798 ENGINE AR-COMPLETE
FASTENER GP-FRONT HOUSING
466-9460 FASTENER GP-FRONT HOUSING
466-9460 FASTENER GP-FRONT HOUSING
S/N TXH5298-UP
PART OF 286-9798 ENGINE AR-COMPLETE
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
GEAR GP-FRONT
207-0449 GEAR GP-FRONT
207-0449 GEAR GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 241-5933, 280-2166, 356-2365 ENGINE AR-CORE
HOUSING GP-FRONT
241-0164 HOUSING GP-FRONT
241-0164 HOUSING GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
HOUSING GP-FRONT
241-0478 HOUSING GP-FRONT
241-0478 HOUSING GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 241-0164 HOUSING GP-FRONT
KIT-FRONT COVER GASKET
444-6485 KIT-FRONT COVER GASKET
444-6485 KIT-FRONT COVER GASKET
S/N SBE1-UP; JCM1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION
PLATE AS-FRONT HOUSING
353-9982 PLATE AS-FRONT HOUSING
353-9982 PLATE AS-FRONT HOUSING
S/N TXH1-UP; RHX1-UP
PART OF 241-0164 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
S/N TXH1-UP; RHX1-UP
REAR, LOW PROFILE LIFTING EYE
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
LIFTING GP-ENGINE
112-2418 LIFTING GP-ENGINE
112-2418 LIFTING GP-ENGINE
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
S/N RHX1-2620
PART OF 257-4960 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
227-3503 MOUNTING GP-ALTERNATOR & COMPR
S/N TXH1-5297; RHX2621-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR & COMPR
460-4661 MOUNTING GP-ALTERNATOR & COMPR
460-4661 MOUNTING GP-ALTERNATOR & COMPR
S/N TXH5298-UP
PART OF 286-9798 ENGINE AR-COMPLETE
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
151-6660 MOUNTING GP-ENGINE
151-6660 MOUNTING GP-ENGINE
S/N SBE1-205; JCM1-176
PART OF 222-8318 INSTALLATION AR-ENGINE
MOUNTING GP-ENGINE
287-0203 MOUNTING GP-ENGINE
287-0203 MOUNTING GP-ENGINE
S/N SBE206-UP; JCM177-UP
PART OF 222-8318 INSTALLATION AR-ENGINE
SUPPORT GP-ENGINE
227-9495 SUPPORT GP-ENGINE
227-9495 SUPPORT GP-ENGINE
S/N TXH1-UP; RHX7953-UP
FRONT PLATE TO CYLINDER HEAD
PART OF 286-9798 ENGINE AR-COMPLETE
SUPPORT GP-ENGINE
235-5805 SUPPORT GP-ENGINE
235-5805 SUPPORT GP-ENGINE
S/N RHX1-7952
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
SUPPORT GP-ENGINE
290-9021 SUPPORT GP-ENGINE
290-9021 SUPPORT GP-ENGINE
S/N TXH1-UP; RHX1-UP
PART OF 286-9798 ENGINE AR-COMPLETE
SUPPORT GP-ENGINE
7E-4876 SUPPORT GP-ENGINE
7E-4876 SUPPORT GP-ENGINE
S/N RHX1-2999
PART OF 257-4960 ENGINE AR-COMPLETE
PAN GP-OIL
PAN GP-OIL
220-0293 PAN GP-OIL
220-0293 PAN GP-OIL -ENGINE
S/N RHX1-1079
PART OF 257-4960 ENGINE AR-COMPLETE
PAN GP-OIL
270-7278 PAN GP-OIL
270-7278 PAN GP-OIL -ENGINE
S/N RHX1080-2154
PART OF 257-4960 ENGINE AR-COMPLETE
PAN GP-OIL
271-5761 PAN GP-OIL
271-5761 PAN GP-OIL -ENGINE
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
PISTON & ROD GP
PISTON & ROD GP
220-1441 PISTON & ROD GP
220-1441 PISTON & ROD GP
S/N RHX1-625
COMBUSTION RATIO 18:1
PART OF 241-5933 ENGINE AR-CORE
PISTON & ROD GP
220-1441 PISTON & ROD GP
220-1441 PISTON & ROD GP
S/N TXH1-UP; RHX626-UP
COMBUSTION RATIO 18:1
PART OF 241-5933, 280-2166 ENGINE AR-CORE
PISTON & ROD GP
368-7822 PISTON & ROD GP
368-7822 PISTON & ROD GP
S/N TXH1-UP
PART OF 241-5933, 356-2365 ENGINE AR-CORE
PULLEY GP
PULLEY GP
221-3705 PULLEY GP
221-3705 PULLEY GP
S/N TXH1-5297; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
SUPPRESSION GP-SOUND
COVER GP-SOUND SUPPRESSION
246-5984 COVER GP-SOUND SUPPRESSION
246-5984 COVER GP-SOUND SUPPRESSION -FRONT HOUSING
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
COVER GP-SOUND SUPPRESSION
307-7905 COVER GP-SOUND SUPPRESSION
307-7905 COVER GP-SOUND SUPPRESSION
S/N SBE1-UP; JCM1-UP
PART OF 298-3128 HOOD & GUARD GP
AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
363-9862 PANEL GP-SOUND SUPPRESSION
363-9862 PANEL GP-SOUND SUPPRESSION -LH
S/N TXH1128-2726
PART OF 286-9798 ENGINE AR-COMPLETE
SERPENTINE/V-BELTS
BELT GP-SERPENTINE
460-4854 BELT GP-SERPENTINE
460-4854 BELT GP-SERPENTINE
S/N TXH5298-UP
PART OF 286-9798 ENGINE AR-COMPLETE
VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
234-5005 BASE GP-VALVE COVER & INJ HARN
234-5005 BASE GP-VALVE COVER & INJ HARN
S/N RHX1-2217
PART OF 241-5933, 280-2166 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
S/N RHX1884-2154; RHX2218-5201
PART OF 241-5933 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
S/N TXH1-UP; RHX5202-UP
PART OF 241-5933, 356-2365 ENGINE AR-CORE
COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
S/N TXH1-UP; RHX8292-UP
PART OF 246-5628 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
160-7452 COVER GP-VALVE MECHANISM
160-7452 COVER GP-VALVE MECHANISM
S/N TXH1-UP; RHX8292-UP
PART OF 246-5628 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
225-1147 COVER GP-VALVE MECHANISM
225-1147 COVER GP-VALVE MECHANISM
S/N TXH1128-UP; RHX1-8291
PART OF 225-1149, 236-2230 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
225-1148 COVER GP-VALVE MECHANISM
225-1148 COVER GP-VALVE MECHANISM
S/N TXH3151-UP; RHX1-8291
PART OF 246-5628, 275-8900 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
225-1149 COVER GP-VALVE MECHANISM
225-1149 COVER GP-VALVE MECHANISM
S/N TXH3151-UP
PART OF 275-8900 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
236-2230 COVER GP-VALVE MECHANISM
236-2230 COVER GP-VALVE MECHANISM
S/N TXH3151-UP; RHX1-8291
PART OF 246-5628, 275-8900 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
246-5628 COVER GP-VALVE MECHANISM
246-5628 COVER GP-VALVE MECHANISM
S/N RHX1-8291
DOES NOT HAVE AN OIL FILL
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
246-5628 COVER GP-VALVE MECHANISM
246-5628 COVER GP-VALVE MECHANISM
S/N TXH1-UP; RHX8292-UP
DOES NOT HAVE AN OIL FILL
PART OF 286-9798 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
275-8900 COVER GP-VALVE MECHANISM
275-8900 COVER GP-VALVE MECHANISM
S/N TXH3151-UP
PART OF 286-9798 ENGINE AR-COMPLETE
FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
S/N TXH1-UP; RHX1-UP
PART OF 286-9798 ENGINE AR-COMPLETE, 241-5933, 280-2166 ENGINE AR-CORE
CANNOT BE USED WITH JAKE BRAKE
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N RHX1-1889
PART OF 241-5933 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N RHX1889-2217
PART OF 241-5933 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N RHX2218-UP
PART OF 241-5933 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N TXH1-UP; RHX2218-UP
PART OF 241-5933, 356-2365 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N TXH1-UP
PART OF 241-5933, 356-2365 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
280-2167 MECHANISM GP-FUEL PUMP & VALVE
280-2167 MECHANISM GP-FUEL PUMP & VALVE
S/N RHX1613-2217
PART OF 280-2166 ENGINE AR-CORE
ROCKER ARM GP
198-9898 ROCKER ARM GP
198-9898 ROCKER ARM GP
S/N RHX1-1612
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1929 ROCKER ARM GP
278-1929 ROCKER ARM GP
S/N RHX1613-UP
PART OF 190-0009, 280-2167 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1931 ROCKER ARM GP
278-1931 ROCKER ARM GP
S/N RHX1889-2154
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
S/N TXH1-UP; RHX2218-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
328-4236 ROCKER ARM GP
328-4236 ROCKER ARM GP
S/N TXH1-UP; RHX2218-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
328-4238 ROCKER ARM GP
328-4238 ROCKER ARM GP
S/N TXH1-UP; RHX2218-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
437-3862 ROCKER ARM GP
437-3862 ROCKER ARM GP
S/N TXH1-UP
PART OF 437-3865 ROCKER ARM GP
ROCKER ARM GP
437-3864 ROCKER ARM GP
437-3864 ROCKER ARM GP
S/N TXH1-UP
PART OF 437-3865 ROCKER ARM GP
ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N TXH1-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
Type 1
ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N TXH1-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
Type 2
ROCKER ARM GP
489-8222 ROCKER ARM GP
489-8222 ROCKER ARM GP
S/N TXH1-UP
PART OF 437-3865 ROCKER ARM GP
PLATE GP-ENGINE IDENTIFICATION
224-3979 PLATE GP-ENGINE IDENTIFICATION
224-3979 PLATE GP-ENGINE IDENTIFICATION
S/N RHX1-2999
PART OF 257-4960 ENGINE AR-COMPLETE
HOUSING GP-REAR
445-2666 KIT-REAR COVER GASKET
445-2666 KIT-REAR COVER GASKET
S/N SBE1-UP; JCM1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@286-9798@@@@@
FIELD INSTALLATION
COVER GP-ENGINE
KIT-FRONT COVER GASKET
444-6485 KIT-FRONT COVER GASKET
444-6485 KIT-FRONT COVER GASKET
S/N SBE1-UP; JCM1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION
ENGINE OVERHAUL KIT
440-1637 KIT-ENGINE OVERHAUL
440-1637 KIT-ENGINE OVERHAUL -BRONZE
S/N SBE1-UP; JCM1-UP
FOR USE WITH @@@@@286-9798@@@@@
FIELD INSTALLATION

Information:

(For parts list, see above)

Disassembly and Assembly
Air Compressor - Remove and Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Air Compressor Drive Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Specifications
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner - Alternator and Compressor
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
A New Belt Tensioner Is Now Used on Certain Machines {1205, 1207, 1358, 1384, 1405, 1425}
2010/11/11
Specifications
Compression Brake - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Compression Brake
C15 and C18 Engines for Caterpillar Built Machines
Systems Operation
Compression Brake - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Testing and Adjusting
Compression Brake Lash - Adjust - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Retarder - Test
C15 and C18 Engines for Caterpillar Built Machines
Specifications
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
2013/06/19
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Special Instruction
Installation of the <NOBR>458-7850</NOBR> Support Bracket on Certain C18 385C and 390D Excavator Engines {1405, 1802}
Installation of the 458-7850 Support Bracket on Certain C18 385C and 390D Excavator Engines {1405, 1802}
Service Magazine
New Alternator Mounting Groups Are Now Used on Certain C18 Machine Engines {1405, 1802}
New Alternator Mounting Groups Are Now Used on Certain C18 Machine Engines {1405, 1802}
Specifications
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1202, 1203}
2010/12/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
2009/10/29
Truck Engine News
The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21
Engine News
The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS THAT WERE FIELD REWORKED IN 2017 WITH A C18 ENGINE, AND C18 GENERATOR SETS, INDUSTRIAL ENGINES, LOCOMOTIVE ENGINES, MARINE ENGINES, OEM POWER PACKS, PETROLEUM ENGINES, AND TRUCK ENGINES
Testing and Adjusting
Cylinder Block - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Cylinder Is Noisy
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Precautions for Cylinder Liner Installation {1201, 1216}
2007/08/27
New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}
2008/08/11
A New Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Machine Engines {1124, 1201, 7555}
2010/03/12
New Cylinder Pack Assemblies Are Available in Sets for Certain Machines Equipped with C18 Engines {1201, 1216, 1225, 1239}
2011/06/08
The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
A New Cylinder Liner is Now Used on Certain C18 and C32 Machine Engines {1201}
A New Cylinder Liner is Now Used on Certain C18 and C32 Machine Engines {1201}
Engine News
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head - Install
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Outer Valve Spring Is Now Used {1100, 1108}
2008/12/01
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
Specifications
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Vibration Damper and Pulley - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385C EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385C EXCAVATORS
Service Letter-Asia
Service Letter-APD
Service Magazine
A New Lip Type Seal Is Available for the Fan Drive Group {1359}
2008/05/12
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
C15 and C18 Engines for Caterpillar Built Machines
Flywheel - Install
C15 and C18 Engines for Caterpillar Built Machines
Flywheel and Ring Gear - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
C15 and C18 Engines for Caterpillar Built Machines
Flywheel and Ring Gear - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Service Magazine
A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
2013/06/19
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/21
Specifications
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Flywheel Housing Salvage for Excavator C18 Engines {0677, 1157}
Flywheel Housing Salvage for Excavator C18 Engines {0677, 1157}
Testing and Adjusting
Flywheel Housing - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install - Equipped with Rear Power Take-Off
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
An Improved Seal is Used {1157, 7555}
2009/02/09
A New Gasket is Now Available for Certain Hydraulic Excavator and Material Handler Engines {1157}
A New Gasket is Now Available for Certain Hydraulic Excavator and Material Handler Engines {1157}
Technical Information Bulletin
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
Specifications
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Cover Group (Front Housing)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Cover Group (Front Housing)
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front) - Install
C15 and C18 Engines for Caterpillar Built Machines
Front Cover - Remove
C15 and C18 Engines for Caterpillar Built Machines
Front Cover - Install
C15 and C18 Engines for Caterpillar Built Machines
Special Instruction
Installation of the <NOBR>458-7850</NOBR> Support Bracket on Certain C18 385C and 390D Excavator Engines {1405, 1802}
Installation of the 458-7850 Support Bracket on Certain C18 385C and 390D Excavator Engines {1405, 1802}
Service Magazine
New Alternator Mounting Groups Are Now Used on Certain C18 Machine Engines {1405, 1802}
New Alternator Mounting Groups Are Now Used on Certain C18 Machine Engines {1405, 1802}
Specifications
Engine Trunnion
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Engine Support (Front) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Engine Rear Mount - Remove
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Engine Rear Mount - Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Engine Front Support - Remove
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Engine Front Support - Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Engine Oil and Filter - Change
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Technical Information Bulletin
Oil Pan Gasket Leaks on Certain C15 and C18 Engines {1302}
Oil Pan Gasket Leaks on Certain C15 and C18 Engines {1302}
Specifications
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Oil Pan - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Engine Oil Pan - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
New Oil Pans Are Now Used for Excavators {1302, 1326}
2006/11/06
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Piston Seizures on C18 Engines{1225, 1331}
Piston Seizures on C18 Engines{1225, 1331}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER PACKS FOR CERTAIN 3400, 3500, C-15, AND C18 ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER PACKS FOR CERTAIN 3400, 3500, C-15, AND C18 ENGINE APPLICATIONS
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C15 and C18 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
New Cylinder Pack Assemblies Are Available in Sets for Certain Machines Equipped with C18 Engines {1201, 1216, 1225, 1239}
2011/06/08
A New Piston Is Used in Certain Machines Equipped with C18 Engines {1225}
2013/08/12
Disassembly and Assembly
Rear Power Take-Off (RPTO) - Remove - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Specifications
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Belt Tightener - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Crankshaft Vibration Damper and Pulley - Remove and Install
385C Excavator, 385C Front Shovel and 385C MHPU
Mobile Hydraulic Power Unit Engine Supplement
Service Magazine
A New Belt Tensioner Is Now Used on Certain Machines {1205, 1207, 1358, 1384, 1405, 1425}
2010/11/11
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Engine Valve Lash and Fuel Injector Timing - Check
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Rocker Shaft
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Variable Valve Actuator
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Variable Valve Actuator
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Variable Valve Actuator
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C15 and C18 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Valve Lash Is Excessive
C15 and C18 Engines for Caterpillar Built Machines
Valve Rotator or Spring Lock Is Free
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Rocker Arm and Shaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Remove
C15 and C18 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/05/17
A New Harness is Now Used {1120, 1408}
2008/02/11
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly is Available {1123}
2009/02/02
A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
2010/03/10
A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}
2010/04/12
A New Rocker Shaft Bolt Is Used on Certain Machines Equipped with C15 and C18 Engines {1102, 7553}
2010/11/17
A New Valve Bridge Is Available for Certain Machines {1121}
2011/01/20
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
New Rocker Arm Assemblies Are Used in Certain C18 Machine Engines {1102, 1123}
2014/04/30
An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
2014/07/31
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C18, C27, and C32 Machine Engines {1123}
2015/03/25
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

CATERPILLAR 385 C 2010
 
CATERPILLAR 385 C 2010
- TRACK EXCAVATORS
WAGNER ASIA EQUIPMENT LLC
Bayangol district, 4th Khoroo, Baruun Uildver-133 Wagner Asia Bldg, P.O.Box-26
2015 CAT 385C
Call 
2015 CAT 385C

Shangjia Commerce and Trade Co. Ltd.
2005 CAT 385C
Call 
2005 CAT 385C

LIGRO TRADING BV
Panheel, Panheel, The Netherlands
2008 CAT 385C
USD $145,000 
2008 CAT 385C

Bluesky International FZC
2010 CAT 385C
Call 
2010 CAT 385C

Best Machinery Holland BV
Rotterdam, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.