155-9196 CYLINDER GP-COUNTERWEIGHT S/N SBE1-UP; JCM1-UP PART OF 228-8132 COUNTERWEIGHT AR AN ATTACHMENT 385C

HYDRAULIC SYSTEM

CYLINDER GP

0. 155-9196 CYLINDER G
1. 155-9197 CYLINDER G
2. 155-9071 CYLINDER G
3. 259-0871 CYLINDER G
4. 315-3375 CYLINDER G
5. 315-3375 CYLINDER G

DRIVE GP

6. 6I-3638 DRIVE GP-P
7. 148-4598 DRIVE GP-S
8. 148-4598 DRIVE GP-S
9. 148-4626 DRIVE GP-S
0. INFORMATION

EXCAVATOR 385C EXCAVATOR JCM
385C L Excavator JCM00001-UP (MACHINE) POWERED BY C-18 Engine SEBP4203 385C JCM (2003)

HYDRAULIC SYSTEM

CYLINDER GP

315-4451 CYLINDER GP-BUCKET

510-7356 CYLINDER GP-BUCKET

155-9196 CYLINDER GP-COUNTERWEIGHT

155-9197 CYLINDER GP-COUNTERWEIGHT

155-9071 CYLINDER GP-HYDRAULIC

259-0871 CYLINDER GP-HYDRAULIC

#SEBP42030750

155-9196: CYLINDER GP-COUNTERWEIGHT

CYLINDER GP-COUNTERWEIGHT

155-9196 CYLINDER GP-COUNTERWEIGHT
S/N SBE1-UP; JCM1-UP
PART OF 228-8132 COUNTERWEIGHT AR
AN ATTACHMENT

i01701089 SEBP4203

1559196 CYLINDER GP-COUNTERWEIGHT Parts scheme

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	155-9197 Y	[1]	CYLINDER GP-COUNTERWEIGHT
2.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
3.	7X-4803	[2]	SEAL-LIP TYPE
4.	096-0854	[2]	SEAL-LIP TYPE
5.	3B-8485	[1]	ELBOW
	Y		SEPARATE ILLUSTRATION

#SEBP42030751

155-9197: CYLINDER GP-COUNTERWEIGHT

CYLINDER GP-COUNTERWEIGHT

155-9197 CYLINDER GP-COUNTERWEIGHT
S/N SBE1-UP; JCM1-UP
150-MM (5.9-IN) BORE X 940-MM (37-IN) STROKE
PART OF 155-9196 CYLINDER GP-COUNTERWEIGHT
AN ATTACHMENT

i01701091 SEBP4203

1559197 CYLINDER GP-COUNTERWEIGHT Parts scheme

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	188-4224	[1]	CYLINDER AS
1A.	7Y-4666	[1]	BUSHING
2.	7Y-4695 M	[1]	LOCKNUT (M80X2-THD)
3.	188-4217 J	[2]	RING
4.	9X-3601 J	[1]	SEAL AS
5.	188-4218 J	[1]	RING
6.	188-4216	[1]	PISTON
7.	095-1633 J	[1]	SEAL-O-RING
8.	7Y-4673 J	[1]	RING-BACKUP
9.	358-8524	[1]	HEAD
10.	7Y-5215 M	[8]	BOLT-SOCKET HEAD (M24X3X90-MM)
11.	173-3363	[1]	ROD AS
11A.	7Y-5102	[1]	BUSHING
12.	7Y-4672	[1]	RING-RETAINING
13.	114-0760	[1]	BUSHING
14.	128-9265 J	[1]	SEAL-BUFFER
15.	170-9864 J	[1]	SEAL-U-CUP
16.	7Y-4669 J	[1]	RING-BACKUP
17.	165-9290 J	[1]	SEAL-LIP TYPE

			AVAILABLE REPAIR KIT(S):
	191-5619 J	[1]	KIT-SEAL (COUNTERWEIGHT CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP42030752

155-9071: CYLINDER GP-HYDRAULIC

CYLINDER GP-HYDRAULIC

155-9071 CYLINDER GP-HYDRAULIC
S/N SBE1-UP; JCM1-UP
220-MM (8.7-IN) BORE X 2262-MM (89-IN) STROKE
PART OF 155-9070 CYLINDER & SEAL GP-HYDRAULIC
AN ATTACHMENT

i01535393 SEBP4203

1559071 CYLINDER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	170-9910	[1]	CYLINDER AS
1A.	172-2848	[1]	BUSHING
2.	116-3516 M	[1]	NUT-SELF LOCKING (M120X2-THD)
3.	155-9157	[2]	RING
4.	8C-9182 J	[1]	SEAL AS
5.	173-3414 J	[1]	RING
6.	215-9972	[1]	PISTON
7.	095-1733 J	[1]	SEAL-O-RING
8.	4I-6442 J	[1]	RING-BACKUP
9.	173-3366	[1]	HEAD
10.	155-9153 J	[1]	ROD AS
10A.	172-2848	[1]	BUSHING
11.	9X-8399	[12]	WASHER (33X56X6-MM THK)
12.	9X-6618 M	[12]	BOLT (M30X3.5X130-MM)
13.	165-9296 J	[1]	SEAL-LIP TYPE
14.	216-0011 J	[1]	SEAL-U-CUP
15.	191-5704	[1]	STOP
16.	215-9864 J	[1]	RING-BACKUP
17.	128-9262	[1]	BUSHING
18.	103-8364	[1]	RING-RETAINING
19.	116-3518	[1]	STOP
20.	116-3519 J	[1]	RING-SEAL
21.	170-9853 J	[1]	SEAL-BUFFER
22.	4I-6329	[1]	NUT
23.	095-1274 M	[1]	SETSCREW-SOCKET (M6X1X16-MM)

			AVAILABLE REPAIR KIT(S):
	216-0000 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42030753

259-0871: CYLINDER GP-HYDRAULIC

CYLINDER GP-HYDRAULIC

259-0871 CYLINDER GP-HYDRAULIC
S/N SBE1-UP; JCM1-UP
220-MM (8.7-IN) BORE X 2262-MM (89-IN) STROKE
PART OF 155-9070 CYLINDER & SEAL GP-HYDRAULIC
AN ATTACHMENT

i02443429 SEBP4203

2590871 CYLINDER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	283-6093	[1]	CYLINDER AS
1A.	172-2848	[1]	BUSHING
2.	116-3516 M	[1]	NUT-SELF LOCKING (M120X2-THD)
3.	155-9157	[2]	RING
4.	8C-9182 J	[1]	SEAL AS
5.	173-3414 J	[1]	RING
6.	215-9972	[1]	PISTON
7.	095-1733 J	[1]	SEAL-O-RING
8.	4I-6442 J	[1]	RING-BACKUP
9.	173-3366	[1]	HEAD
10.	259-0872 J	[1]	ROD AS
10A.	172-2848	[1]	BUSHING
11.	9X-8258	[12]	WASHER (33X56X6-MM THK)
12.	9X-6618 M	[12]	BOLT (M30X3.5X130-MM)
13.	165-9296 J	[1]	SEAL-LIP TYPE
14.	216-0011 J	[1]	SEAL-U-CUP
15.	191-5704	[1]	STOP
16.	215-9864 J	[1]	RING-BACKUP
17.	128-9262	[1]	BUSHING
18.	103-8364	[1]	RING-RETAINING
19.	116-3518	[1]	STOP
20.	116-3519 J	[1]	RING-SEAL
21.	170-9853 J	[1]	SEAL-BUFFER
22.	4I-6329	[1]	NUT
23.	095-1274 M	[1]	SETSCREW-SOCKET (M6X1X16-MM)

			AVAILABLE REPAIR KIT(S):
	216-0000 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42030754

315-3375: CYLINDER GP-STICK

CYLINDER GP-STICK

315-3375 CYLINDER GP-STICK
S/N SBE1-UP; JCM1-UP
220-MM (8.7-IN) BORE X 2262-MM (89-IN) STROKE
PART OF 155-9070 CYLINDER & SEAL GP-HYDRAULIC
Type 1
AN ATTACHMENT

i03130100 SEBP4203

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	283-6093	[1]	CYLINDER AS
1A.	172-2848	[1]	BUSHING
2.	116-3516 M	[1]	NUT-SELF LOCKING (M120X2-THD)
3.	155-9157 J	[2]	RING
4.	8C-9182 J	[1]	SEAL AS
5.	173-3414 J	[1]	RING
6.	215-9972	[1]	PISTON
7.	095-1733 J	[1]	SEAL-O-RING
8.	4I-6442 J	[1]	RING-BACKUP
9.	173-3366	[1]	HEAD
10.	315-3374	[1]	ROD AS
10A.	172-2848	[1]	BUSHING
11.	9X-8258	[12]	WASHER (33X56X6-MM THK)
12.	9X-6618 M	[12]	BOLT (M30X3.5X130-MM)
13.	165-9296 J	[1]	SEAL-LIP TYPE
14.	216-0011 J	[1]	SEAL-U-CUP
15.	191-5704	[1]	STOP
16.	215-9864 J	[1]	RING-BACKUP
17.	128-9262	[1]	BUSHING
18.	103-8364	[1]	RING-RETAINING
19.	116-3518	[1]	STOP
20.	116-3519 J	[1]	RING-SEAL
21.	170-9853 J	[1]	SEAL-BUFFER
22.	4I-6329	[1]	NUT
23.	095-1274 M	[1]	SETSCREW-SOCKET (M6X1X16-MM)

			AVAILABLE REPAIR KIT(S):
	216-0000 J	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42030755

315-3375: CYLINDER GP-STICK

CYLINDER GP-STICK

315-3375 CYLINDER GP-STICK
S/N SBE1-UP; JCM1-UP
220-MM (8.7-IN) BORE X 2262-MM (89-IN) STROKE
PART OF 155-9070 CYLINDER & SEAL GP-HYDRAULIC
Type 2
AN ATTACHMENT

i04751109 SEBP4203

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	283-6093	[1]	CYLINDER AS
1A.	172-2848	[1]	BUSHING
2.	116-3516 M	[1]	NUT-SELF LOCKING (M120X2-THD)
3.	155-9157 J	[2]	RING
4.	8C-9182 J	[1]	SEAL AS
5.	173-3414 J	[1]	RING
6.	433-5664	[1]	PISTON
7.	365-9196 CJ	[1]	SEAL-O-RING
8.	365-9197 CJ	[1]	RING-BACKUP
9.	365-3598 C	[1]	HEAD
10.	317-8435 C	[1]	ROD AS
10A.	172-2848	[1]	BUSHING
11.	9X-8399	[12]	WASHER (33X56X6-MM THK)
12.	177-9754 CM	[12]	BOLT (M30X3.5X130-MM)
13.	165-9296 J	[1]	SEAL-LIP TYPE
14.	367-3961 J	[1]	SEAL-U-CUP
15.	191-5704	[1]	STOP
16.	215-9864 J	[1]	RING-BACKUP
17.	128-9262	[1]	BUSHING
18.	103-8364	[1]	RING-RETAINING
19.	383-8638	[1]	STOP
20.	116-3519 J	[1]	RING-SEAL
21.	367-3934 J	[1]	SEAL-BUFFER
22.	436-8027 C	[1]	NUT
23.	350-3842 CM	[1]	SETSCREW (M8X1.25X12.3-MM)
24.	8C-4893 CJ	[1]	SEAL-HEAD (211.58-MM ID)
25.	5M-6213 C	[1]	PLUG-PIPE (1/4-18-THD)

			AVAILABLE REPAIR KIT(S):
	370-1866 CJ	[1]	KIT-SEAL (STICK CYLINDER)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42030756

6I-3638: DRIVE GP-PUMP

DRIVE GP-PUMP

6I-3638 DRIVE GP-PUMP
S/N TXH1-UP; RHX1-UP
PART OF 257-4960, 286-9798 ENGINE AR-COMPLETE

i01504030 SEBP4203

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1590	[3]	BOLT (3/8-16X2-IN)
2.	8T-9527	[1]	SEAL-O-RING
3.	133-9907 YC	[1]	ADAPTER GP-PUMP DRIVE
4.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP42030757

148-4598: DRIVE GP-SWING

DRIVE GP-SWING

148-4598 DRIVE GP-SWING -WITHOUT MOTOR, FRONT
S/N SBE1-191; JCM1-175
PART OF 227-6131 DRIVE GP-SWING

i01528886 SEBP4203

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-4602	[4]	GEAR-PLANETARY (24-TEETH)
2.	094-1528	[8]	WASHER (53X84X1-MM THK)
3.	148-4608	[4]	SHAFT-PLANETARY
4.	191-2525	[1]	COVER-HOUSING
5.	148-4600	[1]	GEAR-SUN (17-TEETH)
6.	7I-7684 M	[2]	SPACER (50X79.6X6-MM THK)
7.	199-4680	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
8.	199-4678	[1]	PIPE AS
9.	096-1441	[1]	RING-RETAINING
10.	093-1730	[1]	RING-RETAINING
11.	148-4601	[1]	GEAR-SUN (17-TEETH)
12.	191-2511	[1]	CARRIER-PLANETARY
13.	114-1322	[1]	RING-RETAINING
14.	148-4607	[1]	CARRIER-PLANETARY
15.	148-4604	[1]	GEAR-RING (67-TEETH)
17.	1U-8846 B		SEALANT-GASKET
18.	110-7149	[1]	RING-RETAINING
19.	9U-8693	[1]	BEARING-ROLLER
20.	6V-7238	[1]	VALVE-SHUTOFF
21.	3K-0360	[1]	SEAL-O-RING
22.	7I-7619	[1]	BEARING-ROLLER
23.	128-9170	[2]	SEAL-LIP TYPE
24.	199-4496	[1]	SHAFT-PINION
25.	7I-7611	[1]	CAGE
26.	8T-4183 M	[10]	BOLT (M12X1.75X40-MM)
27.	8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
28.	5M-4454	[1]	SEAL-O-RING
29.	191-2524	[1]	HOUSING
30.	148-4611	[8]	WASHER (71.3X112X1-MM THK)
31.	191-2514	[8]	BEARING AS
32.	148-4609	[4]	SHAFT-PLANETARY
33.	148-4603	[4]	GEAR-PLANETARY (24-TEETH)
34.	099-5194	[8]	PIN-SPRING
35.	8T-6383 M	[24]	BOLT (M16X2X200-MM)
36.	9X-8257	[24]	WASHER (17.5X30X3.5-MM THK)
37.	191-2513	[4]	BEARING AS-ROLLER
38.	231-6864	[1]	BREATHER AS (SWING DRIVE)
	093-5150	[1]	COUPLING-PIPE
	114-8234	[1]	BREATHER (SWING DRIVE)
	231-6969	[1]	NIPPLE-PIPE
39.	171-9413	[1]	SPACER (140.5X160X103.2-MM THK)
40.	199-4672	[1]	CONNECTOR AS
	6V-9746	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP42030758

148-4598: DRIVE GP-SWING

DRIVE GP-SWING

148-4598 DRIVE GP-SWING -WITHOUT MOTOR, FRONT
S/N SBE192-UP; JCM176-UP
PART OF 227-6131 DRIVE GP-SWING

i02456884 SEBP4203

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-4602	[4]	GEAR-PLANETARY (24-TEETH)
2.	094-1528	[8]	WASHER (53X84X1-MM THK)
3.	148-4608	[4]	SHAFT-PLANETARY
4.	191-2525	[1]	COVER-HOUSING
5.	148-4600	[1]	GEAR-SUN (17-TEETH)
6.	7I-7684 M	[2]	SPACER (50X79.6X6-MM THK)
7.	199-4680	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
8.	199-4678	[1]	PIPE AS
9.	096-1441	[1]	RING-RETAINING
10.	093-1730	[1]	RING-RETAINING
11.	148-4601	[1]	GEAR-SUN (17-TEETH)
12.	191-2511	[1]	CARRIER-PLANETARY
13.	114-1322	[1]	RING-RETAINING
14.	148-4607	[1]	CARRIER-PLANETARY
15.	148-4604	[1]	GEAR-RING (67-TEETH)
17.	1U-8846 B		SEALANT-GASKET
18.	110-7149	[1]	RING-RETAINING
19.	9U-8693	[1]	BEARING-ROLLER
20.	6V-7238	[1]	VALVE-SHUTOFF
21.	3K-0360	[1]	SEAL-O-RING
22.	7I-7619	[1]	BEARING-ROLLER
23.	128-9170	[2]	SEAL-LIP TYPE
24.	199-4496	[1]	SHAFT-PINION
25.	7I-7611	[1]	CAGE
26.	453-3447 M	[10]	BOLT (M12X1.75X40-MM)
27.	451-2182	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
28.	5M-4454	[1]	SEAL-O-RING
29.	191-2524	[1]	HOUSING
30.	148-4611	[8]	WASHER (71.3X112X1-MM THK)
31.	191-2514	[8]	BEARING AS
32.	148-4609	[4]	SHAFT-PLANETARY
33.	148-4603	[4]	GEAR-PLANETARY (24-TEETH)
34.	099-5194	[8]	PIN-SPRING
35.	453-4169 M	[24]	BOLT (M16X2X200-MM)
36.	451-2175	[24]	WASHER-HARD (17.5X30X3.5-MM THK)
37.	191-2513	[4]	BEARING AS-ROLLER
38.	227-6221 C	[1]	BREATHER AS (SWING DRIVE)
	4H-6112	[1]	BREATHER (SWING DRIVE)
	227-6215	[1]	BOSS (1/4-18-THD)
	267-6785	[1]	PIPE
39.	171-9413	[1]	SPACER (140.5X160X103.2-MM THK)
40.	199-4672	[1]	CONNECTOR AS
	6V-9746	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP42030759

148-4626: DRIVE GP-SWING

DRIVE GP-SWING

148-4626 DRIVE GP-SWING -WITHOUT MOTOR, REAR
S/N SBE1-191; JCM1-174
PART OF 227-6130 DRIVE GP-SWING

i01528925 SEBP4203

For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-4602	[4]	GEAR-PLANETARY (24-TEETH)
2.	094-1528	[8]	WASHER (53X84X1-MM THK)
3.	148-4608	[4]	SHAFT-PLANETARY
4.	191-2525	[1]	COVER-HOUSING
5.	148-4600	[1]	GEAR-SUN (17-TEETH)
6.	7I-7684 M	[2]	SPACER (50X79.6X6-MM THK)
7.	199-4672	[1]	CONNECTOR AS
	6V-9746	[1]	SEAL-O-RING
8.	199-4674	[1]	PIPE AS
9.	096-1441	[1]	RING-RETAINING
10.	093-1730	[1]	RING-RETAINING
11.	148-4601	[1]	GEAR-SUN (17-TEETH)
12.	191-2511	[1]	CARRIER-PLANETARY
13.	114-1322	[1]	RING-RETAINING
14.	148-4607	[1]	CARRIER-PLANETARY
15.	148-4604	[1]	GEAR-RING (67-TEETH)
17.	1U-8846 B		SEALANT-GASKET
18.	110-7149	[1]	RING-RETAINING
19.	9U-8693	[1]	BEARING-ROLLER
20.	7I-7619	[1]	BEARING-ROLLER
21.	128-9170	[2]	SEAL-LIP TYPE
22.	199-4496	[1]	SHAFT-PINION
23.	7I-7611	[1]	CAGE
24.	8T-4183 M	[10]	BOLT (M12X1.75X40-MM)
25.	8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	5M-4454	[1]	SEAL-O-RING
27.	191-2524	[1]	HOUSING
28.	6V-7238	[1]	VALVE-SHUTOFF
29.	3K-0360	[1]	SEAL-O-RING
30.	148-4611	[8]	WASHER (71.3X112X1-MM THK)
31.	191-2514	[8]	BEARING AS
32.	148-4609	[4]	SHAFT-PLANETARY
33.	148-4603	[4]	GEAR-PLANETARY (24-TEETH)
34.	099-5194	[8]	PIN-SPRING
35.	8T-6383 M	[24]	BOLT (M16X2X200-MM)
36.	9X-8257	[24]	WASHER (17.5X30X3.5-MM THK)
37.	191-2513	[4]	BEARING AS-ROLLER
38.	231-6864	[1]	BREATHER AS (SWING DRIVE)
	093-5150	[1]	COUPLING-PIPE
	114-8234	[1]	BREATHER (SWING DRIVE)
	231-6969		NIPPLE-PIPE
39.	171-9413	[1]	SPACER (140.5X160X103.2-MM THK)
40.	199-4681	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
	B		USE AS REQUIRED
	M		METRIC PART

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 385B AND 385C HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 385B AND 385C HYDRAULIC EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR INSPECTING AND/OR REPLACING THE STICK CYLINDER ROD ON CERTAIN 385B AND 385C HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND/OR REPLACING THE STICK CYLINDER ROD ON CERTAIN 385B AND 385C HYDRAULIC EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING BOOM LIFT CYLINDERS ON CERTAIN EXCAVATOR MODELS, INCLUDING STANDARD AND BOOM LOWERING CONTROL VALVE ARRANGEMENTS
PRODUCT SUPPORT PROGRAM FOR REPLACING BOOM LIFT CYLINDERS ON CERTAIN EXCAVATOR MODELS, INCLUDING STANDARD AND BOOM LOWERING CONTROL VALVE ARRANGEMENTS

Service Letter-Australia

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

Service Letter-CFEL

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

Service Letter-CSARL

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

Service Letter-Americas

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Lines - Mass Boom
385C Excavator and 385C Front Shovel Machine System Specifications

Boom Lines - Reach Boom
385C Excavator and 385C Front Shovel Machine System Specifications

Boom Lines - General Boom
385C Excavator and 385C Front Shovel Machine System Specifications

Boom Cylinder Lines
385C Excavator and 385C Front Shovel Machine System Specifications

Boom Cylinder
385C Excavator and 385C Front Shovel Machine System Specifications

Stick Cylinder
385C Excavator and 385C Front Shovel Machine System Specifications

Bucket Cylinder
385C Excavator and 385C Front Shovel Machine System Specifications

Counterweight Cylinder
385C Excavator and 385C Front Shovel Machine System Specifications

Stick Cylinder
385C Excavator and 385C Front Shovel Machine System Specifications

Boom Cylinder Lines - Boom Lowering Control
385C Excavator and 385C Front Shovel Machine System Specifications

Boom Lines - Stick Lowering Control
385C Excavator and 385C Front Shovel Machine System Specifications

Bucket Cylinder
385C Excavator and 385C Front Shovel Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

Service Letter-Asia

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

Systems Operation

Cylinders (Boom, Stick and Bucket)
385C Excavator Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators
Product Support Program For Replacing The Stick Cylinder Rod Assembly On Certain 385C Excavators

Testing and Adjusting

Cylinder Speed - Check
385C Excavator Hydraulic System

Cylinder Drift - Check - Loaded Bucket
385C Excavator Hydraulic System

Relief Valve (Counterweight Cylinder) - Test and Adjust
385C Excavator Hydraulic System

Cylinder Drift - Check - Empty Bucket
385C Excavator Hydraulic System

Bench Test Procedures

Disassembly and Assembly

Counterweight Cylinder - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems

Counterweight Cylinder - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems

Bucket Cylinder - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems

Cylinder Pressure Release - Boom Lowering Control Valve
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems

Boom Cylinder - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems

Stick Cylinder - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

A new Bucket Cylinder for the HB Bucket Family Has Increased Durability for 385C Excavators {5457}
2009/02/23

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New Torque Specification for the Self-Locking Nut on the Rod Assembly of the Stick Cylinder for Certain Excavators {5458}
2014/08/25

New Boom Cylinders are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 7562}
2012/04/20

New Seal Kits for the Stick Cylinder is Now Used on Certain Excavators {5458}
2013/01/15

A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}

Caterpillar Parts SIS Catalog 385C :

510-7356 CYLINDER GP-BUCKET

315-4451 CYLINDER GP-BUCKET

315-4442 CYLINDER GP-BUCKET

289-8012 CYLINDER GP-BUCKET

225-4581 CYLINDER GP-BUCKET

215-9965 CYLINDER GP-BUCKET

209-6037 CYLINDER GP-BUCKET

155-9077 CYLINDER GP-BUCKET

155-9197 CYLINDER GP-COUNTERWEIGHT

155-9071 CYLINDER GP-HYDRAULIC

259-0871 CYLINDER GP-HYDRAULIC

315-3375 CYLINDER GP-STICK

6I-3638 DRIVE GP-PUMP

148-4598 DRIVE GP-SWING

Truck sale:

CATERPILLAR 385 C 2010
- TRACK EXCAVATORS
WAGNER ASIA EQUIPMENT LLC
Bayangol district, 4th Khoroo, Baruun Uildver-133 Wagner Asia Bldg, P.O.Box-26

Call

2015 CAT 385C

Shangjia Commerce and Trade Co. Ltd.

Call

2005 CAT 385C

LIGRO TRADING BV
Panheel, Panheel, The Netherlands

USD $145,000

2008 CAT 385C

Bluesky International FZC

Call

2010 CAT 385C

Best Machinery Holland BV
Rotterdam, The Netherlands