AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

220-6372 MANIFOLD GP-EXHAUST S/N TXG1-3052; LHX1-29580 PART OF 257-4958, 286-9797 ENGINE AR-COMPLETE 365C


AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-EXHAUST
MUFFLER GP
TURBOCHARGER GP

EXCAVATOR 365C EXCAVATOR ELC
 365C L Excavator ELC00001-UP (MACHINE) POWERED BY C-15 Engine SEBP4204 365C ELC   (2004)

AIR INLET AND EXHAUST SYSTEM

MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
220-6372 MANIFOLD GP-EXHAUST
 

#SEBP42040180
 

220-6372: MANIFOLD GP-EXHAUST

220-6372 MANIFOLD GP-EXHAUST
S/N TXG1-3052; LHX1-29580
PART OF 257-4958, 286-9797 ENGINE AR-COMPLETE
i02103186 SEBP4204
2206372 MANIFOLD GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 313-9550 [4] STUD-TAPERLOCK (3/8-16X2.165-IN)(HIGH TEMPERATURE)  
2. 106-1792 [12] STUD-TAPERLOCK (3/8-16X4-IN)(HIGH TEMPERATURE)  
3. 108-3612 [12] SPACER (11.13X19.05X53-MM THK)  
4. 133-3359 [2] MANIFOLD-EXHAUST (END)  
5. 221-1426 [1] MANIFOLD-EXHAUST (CENTER)  
6. 2N-2766 [12] LOCKNUT (3/8-16-THD)  
 

#SEBP42040181
 

222-8254: MUFFLER GP

222-8254 MUFFLER GP
S/N ELC1-166
PART OF 255-2881 ENGINE AR
i02111046 SEBP4204
2228254 MUFFLER GP Parts scheme 2228254 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9160 [1] CLAMP-V BAND  
2. 7Y-1729 [1] GASKET  
3. 205-6716 [7] SPACER (10.5X20X19-MM THK)  
4. 233-1188 [2] U-BOLT  
5. 255-2968 [1] CLAMP AS  
6. 266-6181 [1] BRACKET AS  
7. 233-1215 [1] BRACKET AS  
8. 233-1216 [1] TUBE AS  
9. 272-4760 [1] MUFFLER AS  
10. 272-4801 [1] PLATE  
11. 239-6473 [1] PLATE  
12. 239-6553 [1] PLATE AS  
13. 091-9035 [1] SPACER (11X25X20-MM THK)  
14. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
16. 8T-2501 [7] BOLT (3/8-16X2-IN)  
17. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4244 M [8] NUT (M12X1.75-THD)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
24. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
25. 6K-8178 [1] CLIP (LOOP)  
26. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
27. 6W-2928 [1] BOSS  
28. 1B-3057 [1] CLIP  
29. 268-4770 M [2] BOLT (M12X1.75X60-MM)  
30. 149-4741 [2] WASHER (13.5X25.5X3-MM THK)  
31. 149-0206 M [2] NUT-HEX (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP42040182
 

222-8254: MUFFLER GP

222-8254 MUFFLER GP
S/N ELC167-261
PART OF 255-2881 ENGINE AR
i02702351 SEBP4204
2228254 MUFFLER GP Parts scheme 2228254 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9160 [1] CLAMP-V BAND  
2. 7Y-1729 [1] GASKET  
3. 205-6716 [7] SPACER (10.5X20X19-MM THK)  
4. 233-1188 [2] U-BOLT  
5. 255-2968 [1] CLAMP AS  
6. 266-6181 [1] BRACKET AS  
7. 233-1215 [1] BRACKET AS  
8. 233-1216 [1] TUBE AS  
9. 272-4760 [1] MUFFLER AS  
10. 279-7788 C [1] PLATE  
11. 239-6473 [1] PLATE  
12. 279-7853 C [1] PLATE AS  
13. 091-9035 [1] SPACER (11X25X20-MM THK)  
14. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
16. 8T-2501 [7] BOLT (3/8-16X2-IN)  
17. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 C [8] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4244 M [8] NUT (M12X1.75-THD)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-4908 CM [8] BOLT (M8X1.25X25-MM)  
24. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
25. 6K-8178 [1] CLIP (LOOP)  
26. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
27. 6W-2928 [1] BOSS  
28. 1B-3057 [1] CLIP  
29. 268-4770 M [2] BOLT (M12X1.75X60-MM)  
30. 149-4741 [2] WASHER (13.5X25.5X3-MM THK)  
31. 149-0206 M [2] NUT-HEX (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP42040183
 

222-8254: MUFFLER GP

222-8254 MUFFLER GP
S/N ELC262-358
PART OF 255-2881 ENGINE AR
i02796669 SEBP4204
2228254 MUFFLER GP Parts scheme 2228254 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9160 [1] CLAMP-V BAND  
3. 205-6716 [7] SPACER (10.5X20X19-MM THK)  
4. 233-1188 [2] U-BOLT  
6. 266-6181 [1] BRACKET AS  
7. 233-1215 [1] BRACKET AS  
8. 233-1216 [1] TUBE AS  
9. 272-4760 [1] MUFFLER AS  
10. 279-7788 [1] PLATE  
11. 239-6473 [1] PLATE  
12. 279-7853 [1] PLATE AS  
13. 091-9035 [1] SPACER (11X25X20-MM THK)  
14. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
16. 8T-2501 [7] BOLT (3/8-16X2-IN)  
17. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4244 M [8] NUT (M12X1.75-THD)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
24. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
25. 6K-8178 [1] CLIP (LOOP)  
26. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
27. 6W-2928 [1] BOSS  
28. 1B-3057 [1] CLIP  
29. 289-2492 C [1] CLAMP-MUFFLER  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP42040184
 

222-8254: MUFFLER GP

222-8254 MUFFLER GP
S/N ELC359-486
PART OF 255-2881 ENGINE AR
i03084680 SEBP4204
2228254 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9160 [1] CLAMP-V BAND  
2. 5I-8748 [1] SPACER (11X18X5-MM THK)  
3. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
4. 205-6716 [7] SPACER (10.5X20X19-MM THK)  
5. 233-1188 [2] U-BOLT  
6. 233-1215 [1] BRACKET AS  
7. 233-1216 [1] TUBE AS  
8. 239-6473 [1] PLATE  
9. 272-4760 [1] MUFFLER AS  
10. 289-2492 [1] CLAMP-MUFFLER  
11. 310-9504 C [1] PLATE  
12. 310-9692 C [1] BRACKET AS  
13. 310-9759 C [1] PLATE AS  
14. 1B-3057 [1] CLIP  
15. 4L-9337 C [3] BOLT (3/8-16X1.5-IN)  
16. 5P-4115 C [8] WASHER-HARD (7.2X19X2-MM THK)  
17. 6K-8178 [1] CLIP (LOOP)  
18. 6V-7357 CM [1] BOLT (M6X1X25-MM)  
19. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
20. 8T-2501 [7] BOLT (3/8-16X2-IN)  
21. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
23. 8T-4138 M [7] BOLT (M6X1X20-MM)  
24. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4244 M [8] NUT (M12X1.75-THD)  
26. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
27. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP42040185
 

222-8254: MUFFLER GP

222-8254 MUFFLER GP
S/N ELC487-UP
PART OF 255-2881 ENGINE AR
i03621341 SEBP4204
2228254 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9160 [1] CLAMP-V BAND  
2. 5I-8748 [1] SPACER (11X18X5-MM THK)  
3. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
4. 205-6716 [7] SPACER (10.5X20X19-MM THK)  
5. 233-1188 [2] U-BOLT  
6. 233-1215 [1] BRACKET AS  
7. 233-1216 [1] TUBE AS  
8. 327-7250 [1] PLATE  
9. 324-4082 [1] MUFFLER AS  
10. 289-2492 [1] CLAMP-MUFFLER  
11. 310-9504 [1] PLATE  
12. 310-9692 [1] BRACKET AS  
13. 310-9759 [1] PLATE AS  
15. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
16. 5P-4115 [8] WASHER-HARD (7.2X19X2-MM THK)  
18. 6V-7357 M [1] BOLT (M6X1X25-MM)  
19. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
20. 8T-2501 [7] BOLT (3/8-16X2-IN)  
23. 8T-4138 M [7] BOLT (M6X1X20-MM)  
24. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4244 M [8] NUT (M12X1.75-THD)  
26. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
27. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
28. 100-3237 [1] GROMMET  
29. 8T-1887 [1] CLIP (SLOT)  
30. 8T-1888 [1] CLIP (TAB)  
31. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP42040186
 

238-5102: TURBOCHARGER GP

238-5102 TURBOCHARGER GP
S/N LHX1-8936
PART OF 262-2943 TURBOCHARGER GP
i02105306 SEBP4204
2385102 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2297 [1] CLAMP AS (COMPRESSOR)  
2. 9N-2038 [1] CLAMP AS-TURBINE  
3. 161-6963 [2] CLAMP  
4. 240-7359 [1] CARTRIDGE GP-TURBOCHARGER  
  4P-3818 M [3] BOLT (M4X0.7X10-MM)  
  206-8868 [1] SEAL-RING  
  211-2259 [2] RING-PISTON  
  211-2260 [1] COLLAR-THRUST  
  211-2261 [1] BEARING-THRUST  
  211-2264 [1] RING-PISTON  
  156-6964 M [4] BOLT (M8X1.25X30-MM)  
  239-5894 [2] BEARING-JOURNAL  
  461-3728 [3] RING-RETAINING  
  461-3792 [3] WASHER (WEAR)  
5. 161-6958 [1] CLIP-HOSE  
6. 115-7087 M [1] BOLT (M6X0.04X10.4-MM)  
7. 242-3360 E HOSE (47-CM)  
8. 258-4524 E SLEEVE (26-CM)  
9. 2V-4868 [1] FITTING (1/8-27 PTF)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP42040187
 

262-2943: TURBOCHARGER GP

262-2943 TURBOCHARGER GP
S/N LHX1-8936
WATER COOLED CENTER SECTION
PART OF 257-4958, 286-9797 ENGINE AR-COMPLETE
i02199753 SEBP4204
2622943 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-4295 [1] GASKET (TURBOCHARGER)  
2. 168-7800 [4] LOCKNUT (3/8-16-THD)  
3. 238-5102 Y [1] TURBOCHARGER GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42040188
 

262-2943: TURBOCHARGER GP

262-2943 TURBOCHARGER GP
S/N LHX8937-UP
WATER COOLED CENTER SECTION
PART OF 286-9797 ENGINE AR-COMPLETE
i03624844 SEBP4204
2622943 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-4295 [1] GASKET (TURBOCHARGER)  
2. 332-3936 CY [1] TURBOCHARGER GP  
3. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42040189
 

262-2943: TURBOCHARGER GP

262-2943 TURBOCHARGER GP
S/N TXG145-UP
WATER COOLED CENTER SECTION
PART OF 286-9797 ENGINE AR-COMPLETE
i04775789 SEBP4204
2622943 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 357-1752 C [1] GASKET-TURBOCHARGER  
2. 380-8712 CY [1] TURBOCHARGER GP  
3. 375-2467 CM [4] LOCKNUT-FLANGE (M10X1.5-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines
Testing and Adjusting
Exhaust Temperature - Test
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Exhaust Manifold - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
New Studs and Nuts Are Used to Mount the Turbocharger on Certain Machine Engines {1052, 1059}
2010/08/17
An Improved Locknut Is Now Used to Tighten the Exhaust Manifolds onto the Cylinder Heads of the Engines of Certain Machines {1059, 7553}
2010/08/26
New Locknuts for the Exhaust Manifold Are Available for Certain Machine Engines {1059}
2010/08/23

Caterpillar Parts SIS Catalog 365C :

LINES GP-MUFFLER DRAIN
222-8345 LINES GP-MUFFLER DRAIN
LINES GP-AIR
263-1129 LINES GP-AIR
LINES GP-AIR
263-1129 LINES GP-AIR
LINES GP-AIR
222-8342 LINES GP-AIR
LINES GP-AIR
210-8148 LINES GP-AIR
LINES GP-AIR
210-8148 LINES GP-AIR
LINES GP-AIR
126-0081 LINES GP-AIR
LINES GP-AIR
126-0081 LINES GP-AIR
MUFFLER GP
222-8254 MUFFLER GP
MUFFLER GP
222-8254 MUFFLER GP
MUFFLER GP
222-8254 MUFFLER GP
MUFFLER GP
222-8254 MUFFLER GP
MUFFLER GP
222-8254 MUFFLER GP
TURBOCHARGER GP
238-5102 TURBOCHARGER GP
TURBOCHARGER GP
262-2943 TURBOCHARGER GP
TURBOCHARGER GP
262-2943 TURBOCHARGER GP

Truck sale:

Caterpillar 365C
 
Caterpillar 365C
- Crawler Excavators
FINANZAUTO S.A.
Caterpillar 365C, Crawler Excavators, Construction
149,159 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
Caterpillar 365C, Crawler Excavators, Construction
187,176 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung
179.849 
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung


Caterpillar 365C, Construction
98,651 USD 
Caterpillar 365C, Construction
- Crawler Excavators
FINANZAUTO S.A.
(COMUNIDAD DE MADRID), Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.