317-8432 CYLINDER GP-STICK S/N ELC1-UP 200-MM (7.9-IN) BORE X 2118-MM (83.4-IN) STROKE PART OF 317-8431 CYLINDER & SEAL GP-STICK AN ATTACHMENT 365C

HYDRAULIC SYSTEM

CYLINDER GP

0. 317-8432 CYLINDER G

DRIVE GP

1. 6I-3638 DRIVE GP-P
2. 199-4589 DRIVE GP-S
3. 199-4589 DRIVE GP-S
4. 199-4590 DRIVE GP-S
5. 199-4590 DRIVE GP-S
6. 227-6110 DRIVE GP-S
7. 227-6111 DRIVE GP-S

FILTER GP

8. 227-0417 FILTER & L
9. 228-8095 FILTER & L
0. INFORMATION

EXCAVATOR 365C EXCAVATOR ELC
365C L Excavator ELC00001-UP (MACHINE) POWERED BY C-15 Engine SEBP4204 365C ELC (2004)

HYDRAULIC SYSTEM

CYLINDER GP

169-0776 CYLINDER GP-COUPLER

179-9794 CYLINDER GP-STICK

317-8432 CYLINDER GP-STICK

254-1414 GUARD AR-CYLINDER

254-1399 GUARD GP-CYLINDER

#SEBP42040620

317-8432: CYLINDER GP-STICK

CYLINDER GP-STICK

317-8432 CYLINDER GP-STICK
S/N ELC1-UP
200-MM (7.9-IN) BORE X 2118-MM (83.4-IN) STROKE
PART OF 317-8431 CYLINDER & SEAL GP-STICK
AN ATTACHMENT

i03571644 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-7828	[1]	STOP
2.	8C-9179 J	[1]	SEAL AS
3.	102-0786	[1]	RING-RETAINING
4.	116-3513 M	[1]	LOCKNUT-NYLON (M105X2-THD)
5.	128-9261	[1]	BUSHING
6.	433-5662	[1]	PISTON
7.	147-5738 J	[2]	RING
8.	424-2921	[1]	HEAD
9.	147-5764	[1]	RING-RETAINING
10.	147-5765	[1]	RING
11.	147-5766	[1]	STOP
12.	147-5771 J	[1]	RING-BACKUP
13.	147-5776 J	[1]	RING
14.	342-2073	[1]	CYLINDER AS
14A.	6E-0781	[1]	BUSHING
15.	165-9294 J	[1]	SEAL-LIP TYPE
16.	326-4409	[1]	ROD AS
16A.	6E-0781	[1]	BUSHING
17.	367-3929 J	[1]	SEAL-U-CUP
18.	367-3928 J	[1]	SEAL-BUFFER
19.	095-1731 J	[1]	SEAL-O-RING
20.	143-1452	[2]	RING-RETAINING
21.	4I-6330 J	[1]	RING-BACKUP
22.	6I-6790 J	[1]	RING-SEAL
23.	112-1531 M	[11]	BOLT (M24X3X120-MM)
24.	6V-8237	[11]	WASHER (26X44X4-MM THK)
25.	5M-6213	[2]	PLUG-PIPE (1/4-18-THD)

			AVAILABLE REPAIR KIT(S):
	370-1940 J	[1]	KIT-SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42040621

6I-3638: DRIVE GP-PUMP

DRIVE GP-PUMP

6I-3638 DRIVE GP-PUMP
S/N TXG1-UP; LHX1-UP
PART OF 257-4958, 286-9797 ENGINE AR-COMPLETE

i01504030 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1590	[3]	BOLT (3/8-16X2-IN)
2.	8T-9527	[1]	SEAL-O-RING
3.	133-9907 YC	[1]	ADAPTER GP-PUMP DRIVE
4.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP42040622

199-4589: DRIVE GP-SWING

DRIVE GP-SWING

199-4589 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N ELC1-171
PART OF 227-6110 DRIVE GP-SWING

i01638218 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
2.	7Y-0225	[3]	SHAFT-PLANETARY
3.	094-0574	[1]	RING-RETAINING
4.	093-1731	[1]	RING-RETAINING
5.	136-2890	[1]	COVER-HOUSING
6.	148-4645	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
7.	148-4646	[1]	PIPE-GAUGE
8.	231-6864	[1]	BREATHER AS (SWING DRIVE)
9.	136-2889	[1]	GEAR-SUN (23-TEETH)
10.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
11.	136-2897	[1]	GEAR-SUN (22-TEETH)
12.	136-2891	[1]	CARRIER-PLANETARY
13.	7X-2569 M	[16]	BOLT (M20X2.5X200-MM)
14.	8T-4123	[16]	WASHER (22X35X3.5-MM THK)
15.	1U-8846 B		SEALANT-GASKET
17.	136-2896	[1]	GEAR-RING (70-TEETH)
18.	136-2892	[1]	CARRIER-PLANETARY
19.	093-1730	[1]	RING-RETAINING
20.	096-2653	[1]	RING-RETAINING
21.	136-2893	[1]	SPACER-SPECIAL
22.	136-2894	[1]	HOUSING
23.	136-2942	[1]	SEAL-O-RING
24.	135-9044	[2]	SEAL-LIP TYPE
25.	199-4586	[1]	SHAFT-PINION
26.	136-2941	[1]	CAGE
27.	8T-4183 M	[10]	BOLT (M12X1.75X40-MM)
28.	8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	136-2940	[1]	BEARING
30.	136-2904	[1]	BEARING
31.	099-5194	[4]	PIN-SPRING
32.	136-2898	[8]	WASHER (58.3X89X1-MM THK)
33.	136-2899	[4]	SHAFT-PLANETARY
34.	136-2900	[8]	BEARING-ROLLER
35.	136-2901	[4]	GEAR-PLANETARY (23-TEETH)
36.	095-0891	[3]	PIN-SPRING
37.	110-7053	[3]	GEAR-PLANETARY (23-TEETH)
38.	7Y-0252	[3]	BEARING AS-ROLLER
39.	6V-7238	[1]	VALVE-SHUTOFF
40.	3K-0360	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP42040623

199-4589: DRIVE GP-SWING

DRIVE GP-SWING

199-4589 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N ELC172-UP
PART OF 227-6110 DRIVE GP-SWING

i02458689 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
2.	7Y-0225	[3]	SHAFT-PLANETARY
3.	094-0574	[1]	RING-RETAINING
4.	093-1731	[1]	RING-RETAINING
5.	136-2890	[1]	COVER-HOUSING
6.	148-4645	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
7.	148-4646	[1]	PIPE-GAUGE
8.	227-6221 C	[1]	BREATHER AS (SWING DRIVE)
	4H-6112	[1]	BREATHER (SWING DRIVE)
	227-6215	[1]	BOSS (1/4-18-THD)
	267-6785	[1]	PIPE
9.	136-2889	[1]	GEAR-SUN (23-TEETH)
10.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
11.	136-2897	[1]	GEAR-SUN (22-TEETH)
12.	136-2891	[1]	CARRIER-PLANETARY
13.	453-2850 M	[16]	BOLT (M20X2.5X200-MM)
14.	451-2176	[16]	WASHER-HARD (22X35X3.5-MM THK)
17.	136-2896	[1]	GEAR-RING (70-TEETH)
18.	296-6229	[1]	CARRIER-PLANETARY
19.	093-1730	[1]	RING-RETAINING
20.	096-2653	[1]	RING-RETAINING
21.	136-2893	[1]	SPACER-SPECIAL
22.	136-2894	[1]	HOUSING
23.	136-2942	[1]	SEAL-O-RING
24.	135-9044	[2]	SEAL-LIP TYPE
25.	199-4586	[1]	SHAFT-PINION
26.	136-2941	[1]	CAGE
27.	453-3447 M	[10]	BOLT (M12X1.75X40-MM)
28.	451-2182	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	136-2940	[1]	BEARING
30.	136-2904	[1]	BEARING
31.	099-5194	[4]	PIN-SPRING
32.	136-2898	[8]	WASHER (58.3X89X1-MM THK)
33.	136-2899	[4]	SHAFT-PLANETARY
34.	136-2900	[8]	BEARING-ROLLER
35.	136-2901	[4]	GEAR-PLANETARY (23-TEETH)
36.	095-0891	[3]	PIN-SPRING
37.	110-7053	[3]	GEAR-PLANETARY (23-TEETH)
38.	7Y-0252	[3]	BEARING AS-ROLLER
39.	6V-7238	[1]	VALVE-SHUTOFF
40.	3K-0360	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP42040624

199-4590: DRIVE GP-SWING

DRIVE GP-SWING

199-4590 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N ELC1-171
PART OF 227-6111 DRIVE GP-SWING

i01638219 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
2.	7Y-0225	[3]	SHAFT-PLANETARY
3.	094-0574	[1]	RING-RETAINING
4.	093-1731	[1]	RING-RETAINING
5.	136-2890	[1]	COVER-HOUSING
6.	231-6864	[1]	BREATHER AS
	093-5150	[1]	COUPLING-PIPE
	114-8234	[1]	BREATHER (SWING DRIVE)
	231-6969	[1]	NIPPLE-PIPE
7.	148-4645	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
8.	148-4646	[1]	PIPE-GAUGE
9.	136-2889	[1]	GEAR-SUN (23-TEETH)
10.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
11.	136-2897	[1]	GEAR-SUN (22-TEETH)
12.	136-2891	[1]	CARRIER-PLANETARY
13.	7X-2569 M	[16]	BOLT (M20X2.5X200-MM)
14.	8T-4123	[16]	WASHER (22X35X3.5-MM THK)
15.	1U-8846 B		SEALANT-GASKET
17.	136-2896	[1]	GEAR-RING (70-TEETH)
18.	136-2892	[1]	CARRIER-PLANETARY
19.	093-1730	[1]	RING-RETAINING
20.	096-2653	[1]	RING-RETAINING
21.	136-2893	[1]	SPACER-SPECIAL
22.	136-2894	[1]	HOUSING
23.	136-2942	[1]	SEAL-O-RING
24.	135-9044	[2]	SEAL-LIP TYPE
25.	199-4586	[1]	SHAFT-PINION
26.	136-2941	[1]	CAGE
27.	8T-4183 M	[10]	BOLT (M12X1.75X40-MM)
28.	8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	136-2940	[1]	BEARING
30.	136-2904	[1]	BEARING
31.	099-5194	[4]	PIN-SPRING
32.	136-2898	[8]	WASHER (58.3X89X1-MM THK)
33.	136-2899	[4]	SHAFT-PLANETARY
34.	136-2900	[8]	BEARING-ROLLER
35.	136-2901	[4]	GEAR-PLANETARY (23-TEETH)
36.	095-0891	[3]	PIN-SPRING
37.	110-7053	[3]	GEAR-PLANETARY (23-TEETH)
38.	7Y-0252	[3]	BEARING AS-ROLLER
39.	6V-7238	[1]	VALVE-SHUTOFF
40.	3K-0360	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP42040625

199-4590: DRIVE GP-SWING

DRIVE GP-SWING

199-4590 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N ELC172-UP
PART OF 227-6111 DRIVE GP-SWING

i02458711 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
2.	7Y-0225	[3]	SHAFT-PLANETARY
3.	094-0574	[1]	RING-RETAINING
4.	093-1731	[1]	RING-RETAINING
5.	136-2890	[1]	COVER-HOUSING
6.	227-6221 C	[1]	BREATHER AS (SWING DRIVE)
	4H-6112	[1]	BREATHER (SWING DRIVE)
	227-6215	[1]	BOSS (1/4-18-THD)
	267-6785	[1]	PIPE
7.	148-4645	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
8.	148-4646	[1]	PIPE-GAUGE
9.	136-2889	[1]	GEAR-SUN (23-TEETH)
10.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
11.	136-2897	[1]	GEAR-SUN (22-TEETH)
12.	136-2891	[1]	CARRIER-PLANETARY
13.	453-2850 M	[16]	BOLT (M20X2.5X200-MM)
14.	451-2176	[16]	WASHER-HARD (22X35X3.5-MM THK)
17.	136-2896	[1]	GEAR-RING (70-TEETH)
18.	296-6229	[1]	CARRIER-PLANETARY
19.	093-1730	[1]	RING-RETAINING
20.	096-2653	[1]	RING-RETAINING
21.	136-2893	[1]	SPACER-SPECIAL
22.	136-2894	[1]	HOUSING
23.	136-2942	[1]	SEAL-O-RING
24.	135-9044	[2]	SEAL-LIP TYPE
25.	199-4586	[1]	SHAFT-PINION
26.	136-2941	[1]	CAGE
27.	453-3447 M	[10]	BOLT (M12X1.75X40-MM)
28.	451-2182	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	136-2940	[1]	BEARING
30.	136-2904	[1]	BEARING
31.	099-5194	[4]	PIN-SPRING
32.	136-2898	[8]	WASHER (58.3X89X1-MM THK)
33.	136-2899	[4]	SHAFT-PLANETARY
34.	136-2900	[8]	BEARING-ROLLER
35.	136-2901	[4]	GEAR-PLANETARY (23-TEETH)
36.	095-0891	[3]	PIN-SPRING
37.	110-7053	[3]	GEAR-PLANETARY (23-TEETH)
38.	7Y-0252	[3]	BEARING AS-ROLLER
39.	6V-7238	[1]	VALVE-SHUTOFF
40.	3K-0360	[1]	SEAL-O-RING

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART

#SEBP42040626

227-6110: DRIVE GP-SWING

DRIVE GP-SWING

227-6110 DRIVE GP-SWING -WITH MOTOR, RH
S/N ELC1-UP
PART OF 227-6039 POWER TRAIN AR

i02100376 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	199-4589 Y	[1]	DRIVE GP-SWING (WITHOUT MOTOR, RH)
2.	234-4526 Y	[1]	MOTOR & MTG GP-SWING (RH)
	Y		SEPARATE ILLUSTRATION

#SEBP42040627

227-6111: DRIVE GP-SWING

DRIVE GP-SWING

227-6111 DRIVE GP-SWING -WITH MOTOR, LH
S/N ELC1-UP
PART OF 227-6039 POWER TRAIN AR

i02100370 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	199-4590 Y	[1]	DRIVE GP-SWING (WITHOUT MOTOR, LH)
2.	234-4524 Y	[1]	MOTOR & MTG GP-SWING (LH)
	Y		SEPARATE ILLUSTRATION

#SEBP42040628

227-0417: FILTER & LINES GP-HYDRAULIC

FILTER & LINES GP-HYDRAULIC

227-0417 FILTER & LINES GP-HYDRAULIC
S/N ELC1-UP
PART OF 228-8095 FILTER & LINES GP-HYDRAULIC
AN ATTACHMENT

i02115154 SEBP4204

2270417 FILTER & LINES GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-6849 Y	[1]	VALVE GP-CHECK (PILOT)
3.	191-5650 Y	[1]	FILTER GP-OIL (HYDRAULIC)
4.	236-3127 I	[1]	HOSE AS
5.	236-3128 I	[1]	HOSE AS
6.	236-3131	[1]	SUPPORT AS
7.	087-3591	[2]	SPACER (15.5X30X12-MM THK)
8.	148-8353	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9001	[1]	ELBOW
9.	148-8378	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
10.	150-4043	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-9873	[1]	CONNECTOR
11.	5P-7462	[1]	CLIP (SLOT)
12.	5P-7463	[1]	CLIP (TAB)
13.	6D-4244	[1]	CLIP (LOOP)
14.	6V-0683	[1]	GROMMET
15.	6V-8398	[1]	SEAL-O-RING
16.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4133 M	[4]	NUT (M10X1.5-THD)
18.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
19.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
20.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
21.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
22.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42040629

228-8095: FILTER & LINES GP-HYDRAULIC

FILTER & LINES GP-HYDRAULIC

228-8095 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N ELC1-UP
AN ATTACHMENT

i02395212 SEBP4204

For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
227-0417 Y	[1]	FILTER & LINES GP-HYDRAULIC
		-OR-
266-0928 Y	[1]	FILTER & LINES GP-HYDRAULIC
Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365C HYDRAULIC EXCAVATORS - CONTAINMENT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365C HYDRAULIC EXCAVATORS - CONTAINMENT

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEAKING STICK CYLINDER ASSEMBLY ON CERTAIN 365BL, 365BL SERIES II AND 365CL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEAKING STICK CYLINDER ASSEMBLY ON CERTAIN 365BL, 365BL SERIES II AND 365CL EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER GUARD ON CERTAIN 345C, 365C, AND 385C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER GUARD ON CERTAIN 345C, 365C, AND 385C EXCAVATORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Counterweight Cylinder
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Bucket Cylinder
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Boom Cylinder Lines
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Boom Lines - Reach Boom with Stick Lowering Control Valve
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Stick Cylinder
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Boom Lines
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Boom Cylinder
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Bucket Cylinder
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

Systems Operation

Cylinders (Boom, Stick and Bucket)
365C Excavator Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS

Testing and Adjusting

Cylinder Speed - Check
365C Excavator Hydraulic System

Relief Valve (Counterweight Cylinder) - Test and Adjust
365C Excavator Hydraulic System

Cylinder Drift - Check - Empty Bucket
365C Excavator Hydraulic System

Cylinder Drift - Check - Loaded Bucket
365C Excavator Hydraulic System

Bench Test Procedures

Disassembly and Assembly

Counterweight Cylinder - Remove and Install
365C Excavator Machine Systems

Stick Cylinder - Remove and Install
365C Excavator Machine Systems

Boom Cylinder - Remove and Install
365C Excavator Machine Systems

Bucket Cylinder - Remove and Install
365C Excavator Machine Systems

Cylinder Pressure Release - Boom Lowering Control Valve
365C Excavator Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

A New Rod Assembly is Available for Stick Cylinders. {5458}
2009/09/14

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New Seal Kits for the Stick Cylinder is Now Used on Certain Excavators {5458}
2013/01/15

Proper Lubrication Extends the Life of the Pin and Linkage Bearing on Certain 365C and 374D Excavators {5457, 6513}
2013/06/06

Caterpillar Parts SIS Catalog 365C :

179-9794 CYLINDER GP-STICK

169-0776 CYLINDER GP-COUPLER

150-5913 CYLINDER GP-COUNTERWEIGHT

510-7356 CYLINDER GP-BUCKET

215-9965 CYLINDER GP-BUCKET

155-9077 CYLINDER GP-BUCKET

143-8007 CYLINDER GP-BUCKET

143-8004 CYLINDER GP-BUCKET

6I-3638 DRIVE GP-PUMP

199-4589 DRIVE GP-SWING

199-4590 DRIVE GP-SWING

227-6110 DRIVE GP-SWING

227-6111 DRIVE GP-SWING

227-0417 FILTER & LINES GP-HYDRAULIC

Truck sale:

Caterpillar 365C
- Crawler Excavators
FINANZAUTO S.A.

149,159

Caterpillar 365C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA

187,176

Caterpillar 365C, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA

179.849

Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung

98,651 USD

Caterpillar 365C, Construction
- Crawler Excavators
FINANZAUTO S.A.
(COMUNIDAD DE MADRID), Spain