241-8344 ENGINE AR-COMPLETE S/N MHX1-UP PART OF 241-5774 ENGINE AR 345C EXCAVATOR

Part No	Qty	Parts name
252-7132 Y	[1]	ALTERNATOR GP-CHARGING
223-1615 Y	[1]	BASE GP-OIL FILTER (ENGINE)
230-7215 Y	[1]	BELT GP-SERPENTINE
230-7216 Y	[1]	BELT TENSIONER GP
267-0007 Y	[1]	BREATHER GP (CRANKCASE)
220-8304 Y	[1]	COMPRESSOR GP-REFRIGERANT
		S/N MHX1-1342
276-2403 Y	[1]	COMPRESSOR GP-REFRIGERANT
		S/N MHX1343-UP
241-7601 Y	[1]	CONNECTION GP-ELECTRICAL
249-5278 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
253-7404 Y	[1]	COOLER GP-ENGINE OIL
127-5728 Y	[1]	COVER GP-FLYWHEEL HOUSING
227-2574 Y	[1]	COVER GP-FRONT HOUSING
113-8987 Y	[1]	COVER GP-FRONT HOUSING
117-2786 Y	[1]	COVER GP-OIL FILTER BASE
229-2615 Y	[1]	COVER GP-VALVE MECHANISM
117-2766 Y	[1]	DAMPER GP
267-0009 Y	[1]	ENGINE AR-CORE
117-2771 Y	[1]	FASTENER GP-DAMPER & PULLEY
117-2794 Y	[1]	FASTENER GP-FLYWHEEL
219-7440 Y	[1]	MOUNTING GP-FAN DRIVE
235-0932 Y	[1]	FILLER GP-ENGINE OIL
220-7082 Y	[1]	FILTER GP-ENGINE OIL
246-3265 Y	[1]	FILTER GP-FUEL
117-0183 Y	[1]	FITTING GP-FUEL LINES (SUPPLY)
242-8670 Y	[1]	FLYWHEEL GP
220-7133 Y	[1]	FUMES DISPOSAL GP
220-7097 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
220-7122 Y	[1]	HOUSING GP-FLYWHEEL
224-0880 Y	[1]	LIFTING GP-ENGINE
126-0081 Y	[1]	LINES GP-AIR (TURBOCHARGER OUTLET)
241-4761 Y	[1]	LINES GP-AIR
246-4786 Y	[1]	LINES GP-FUEL
224-8170 Y	[1]	LINES GP-TURBOCHARGER OIL
220-7057 Y	[1]	LINES GP-TURBOCHARGER WATER
236-5900 Y	[1]	LINES GP-WATER
235-0364 Y	[1]	LINES GP-WATER (TEMPERATURE REGULATOR)
224-5383 Y	[1]	MANIFOLD GP-EXHAUST
		S/N MHX1-1051
247-2833 Y	[1]	MANIFOLD GP-EXHAUST
		S/N MHX1052-UP
222-3092 Y	[1]	MANIFOLD GP-INLET (MID)
230-8136 Y	[1]	PAN GP-OIL
117-0165 Y	[1]	PLUG GP-CYLINDER BLOCK (OIL GALLERY, END)
227-9545 Y	[1]	PLUG GP-CYLINDER BLOCK (OIL GALLERY, RH)
238-8962 Y	[1]	PLUG GP-ENGINE
		S/N MHX1-1158
269-6164 Y	[1]	PLUG GP-ENGINE
		S/N MHX1159-UP
224-7662 Y	[1]	PLUG GP-ENGINE OIL COOLER
207-8103 Y	[1]	PULLEY GP-CRANKSHAFT
117-0177 Y	[1]	PULLEY GP-FAN & ALT DRIVE
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
231-1975 Y	[1]	SENSOR GP-ENGINE
		S/N MHX1-1158
243-1555 Y	[1]	SENSOR GP-ENGINE (TEMPERATURE, PRESSURE)
		S/N MHX1159-UP
269-4977 Y	[1]	STARTING MOTOR GP-ELECTRIC
170-4743 Y	[1]	SUPPORT GP-ENGINE
229-3564 Y	[1]	TURBOCHARGER GP
		S/N MHX1-1051
265-5076 Y	[1]	TURBOCHARGER GP
		S/N MHX1052-UP
219-7462 Y	[1]	WIRING GP-ELECTRONIC CONTROL
220-5004	[1]	ELECTRONICS GP-ENGINE RATINGS

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP42050011

280-3645: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

280-3645 ENGINE AR-COMPLETE
S/N TXF114-UP; MHX1088-UP
PART OF 241-5774 ENGINE AR

i05357589 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
252-7132 Y	[1]	ALTERNATOR GP-CHARGING
223-1615 Y	[1]	BASE GP-OIL FILTER (ENGINE)
230-7215 Y	[1]	BELT GP-SERPENTINE
230-7216 Y	[1]	BELT TENSIONER GP
267-0007 Y	[1]	BREATHER GP (CRANKCASE)
220-8304 Y	[1]	COMPRESSOR GP-REFRIGERANT
		S/N MHX1088-1344
276-2403 Y	[1]	COMPRESSOR GP-REFRIGERANT
		S/N MHX1345-UP
241-7601 Y	[1]	CONNECTION GP-ELECTRICAL
249-5278 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
253-7404 Y	[1]	COOLER GP-ENGINE OIL
127-5728 Y	[1]	COVER GP-FLYWHEEL HOUSING
113-8987 Y	[1]	COVER GP-FRONT HOUSING
227-2574 Y	[1]	COVER GP-FRONT HOUSING
117-2786 Y	[1]	COVER GP-OIL FILTER BASE
229-2615 Y	[1]	COVER GP-VALVE MECHANISM
		-OR-
348-2707 Y	[1]	COVER GP-VALVE MECHANISM
117-2766 Y	[1]	DAMPER GP
267-0009 Y	[1]	ENGINE AR-CORE
		S/N MHX1088-6052
317-9990 Y	[1]	ENGINE AR-CORE
		S/N MHX6053-UP
356-2434 Y	[1]	ENGINE AR-CORE
117-2771 Y	[1]	FASTENER GP-DAMPER & PULLEY
117-2794 Y	[1]	FASTENER GP-FLYWHEEL
219-7440 Y	[1]	MOUNTING GP-FAN DRIVE
235-0932 Y	[1]	FILLER GP-ENGINE OIL
		-OR-
376-3204 Y	[1]	COVER GP-OIL FILLER
423-8975 Y	[1]	FILTER GP-ENGINE OIL
		S/N TXF4727-UP
220-7082 Y	[1]	FILTER GP-ENGINE OIL
246-3265 Y	[1]	FILTER GP-FUEL
		S/N MHX1088-10191
356-1881 Y	[1]	PUMP GP-FUEL PRM & PRIM FILTER
		S/N MHX10192-UP
117-0183 Y	[1]	FITTING GP-FUEL LINES (SUPPLY)
242-8670 Y	[1]	FLYWHEEL GP
220-7133 Y	[1]	FUMES DISPOSAL GP
220-7097 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
220-7122 Y	[1]	HOUSING GP-FLYWHEEL
218-7272 Y	[1]	HOUSING GP-FRONT
224-0880 Y	[1]	LIFTING GP-ENGINE
126-0081 Y	[1]	LINES GP-AIR (TURBOCHARGER OUTLET)
241-4761 Y	[1]	LINES GP-AIR
246-4786 Y	[1]	LINES GP-FUEL
224-8170 Y	[1]	LINES GP-TURBOCHARGER OIL
		S/N TXF114-4726
424-6826 Y	[1]	LINES GP-TURBOCHARGER OIL
		S/N TXF4727-UP
220-7057 Y	[1]	LINES GP-TURBOCHARGER WATER
235-0364 Y	[1]	LINES GP-WATER (TEMPERATURE REGULATOR)
236-5900 Y	[1]	LINES GP-WATER
247-2833 Y	[1]	MANIFOLD GP-EXHAUST
222-3092 Y	[1]	MANIFOLD GP-INLET (MID)
229-8084 Y	[1]	MOUNTING GP-VALVE MECHANISM
230-8136 Y	[1]	PAN GP-OIL
223-3875 Y	[1]	PLUG GP-CYLINDER BLOCK (TIMING, CRANKSHAFT)
117-0165 Y	[1]	PLUG GP-CYLINDER BLOCK (OIL GALLERY, END)
227-9545 Y	[1]	PLUG GP-CYLINDER BLOCK (OIL GALLERY, RH)
238-8962 Y	[1]	PLUG GP-ENGINE
		S/N MHX1088-1160
269-6164 Y	[1]	PLUG GP-ENGINE
		S/N MHX1161-UP
224-7662 Y	[1]	PLUG GP-ENGINE OIL COOLER
207-8103 Y	[1]	PULLEY GP-CRANKSHAFT
117-0177 Y	[1]	PULLEY GP-FAN & ALT DRIVE
227-5723 Y	[1]	PUMP GP-FUEL TRANSFER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
231-1975 Y	[1]	SENSOR GP-ENGINE
		S/N MHX1088-1160
243-1555 Y	[1]	SENSOR GP-ENGINE (TEMPERATURE, PRESSURE)
		S/N MHX1161-10191
354-0042 Y	[1]	SENSOR GP-ENGINE (TEMPERATURE, PRESSURE)
		S/N MHX10192-UP
269-4977 Y	[1]	STARTING MOTOR GP-ELECTRIC
170-4743 Y	[1]	SUPPORT GP-ENGINE
265-5076 Y	[1]	TURBOCHARGER GP
219-7462 Y	[1]	WIRING GP-ELECTRONIC CONTROL
		S/N MHX1088-10191
354-0045 Y	[1]	WIRING GP-ELECTRONIC CONTROL
		S/N MHX10192-UP
220-5004	[1]	ELECTRONICS GP-ENGINE RATINGS

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

#SEBP42050012

267-0009: ENGINE AR-CORE

ENGINE AR-CORE

267-0009 ENGINE AR-CORE
S/N MHX1-6073
PART OF 241-8344, 280-3645 ENGINE AR-COMPLETE

i02288752 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
267-0010 Y	[1]	BASE GP-VALVE COVER
223-7463 Y	[1]	CAMSHAFT GP
224-3881 Y	[1]	CRANKSHAFT GP
240-7271 Y	[1]	CYLINDER BLOCK GP
240-7679 Y	[1]	CYLINDER HEAD GP
222-3088 Y	[1]	GEAR GP-FRONT
218-7272 Y	[1]	HOUSING GP-FRONT
229-8084 Y	[1]	MOUNTING GP-VALVE MECHANISM
238-2723 Y	[6]	PISTON & ROD GP
223-3875 Y	[1]	PLUG GP-CYLINDER BLOCK (TIMING, CRANKSHAFT)
233-5221 Y	[1]	PUMP GP-ENGINE OIL
253-1461 Y	[6]	PUMP GP-FUEL INJECTION
227-5723 Y	[1]	PUMP GP-FUEL TRANSFER
228-5812 Y	[1]	PUMP GP-WATER
240-7272 Y	[1]	VALVE MECHANISM GP
230-0961 Y	[1]	WIRING GP-UNIT INJECTOR
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP42050013

317-9990: ENGINE AR-CORE

ENGINE AR-CORE

317-9990 ENGINE AR-CORE
S/N MHX6053-UP
PART OF 280-3645 ENGINE AR-COMPLETE

i03592421 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
267-0010 Y	[1]	BASE GP-VALVE COVER
223-7463 Y	[1]	CAMSHAFT GP
224-3881 Y	[1]	CRANKSHAFT GP
240-7271 Y	[1]	CYLINDER BLOCK GP
240-7679 Y	[1]	CYLINDER HEAD GP
		S/N MHX6053-6072
305-0618 Y	[1]	CYLINDER HEAD GP
		S/N MHX6073-UP
222-3088 Y	[1]	GEAR GP-FRONT
218-7272 Y	[1]	HOUSING GP-FRONT
229-8084 Y	[1]	MOUNTING GP-VALVE MECHANISM
261-1506 Y	[6]	PISTON & ROD GP
		S/N MHX6053-6398
325-0821 Y	[6]	PISTON & ROD GP
		S/N MHX6399-UP
223-3875 Y	[1]	PLUG GP-CYLINDER BLOCK (TIMING, CRANKSHAFT)
233-5221 Y	[1]	PUMP GP-ENGINE OIL
253-1461 Y	[6]	PUMP GP-FUEL INJECTION
227-5723 Y	[1]	PUMP GP-FUEL TRANSFER
228-5812 Y	[1]	PUMP GP-WATER
240-7272 Y	[1]	VALVE MECHANISM GP
230-0961 Y	[1]	WIRING GP-UNIT INJECTOR
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP42050014

356-2433: ENGINE AR-CORE

ENGINE AR-CORE

356-2433 ENGINE AR-CORE
S/N TXF114-UP
PART OF 356-2434 ENGINE AR-CORE

i06511125 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
267-0010 Y	[1]	BASE GP-VALVE COVER
223-7463 Y	[1]	CAMSHAFT GP
224-3881 Y	[1]	CRANKSHAFT GP
240-7271 Y	[1]	CYLINDER BLOCK GP
305-0618 Y	[1]	CYLINDER HEAD GP
		-OR-
486-6230 Y	[1]	CYLINDER HEAD GP
222-3088 Y	[1]	GEAR GP-FRONT
325-0821 Y	[6]	PISTON & ROD GP
233-5221 Y	[1]	PUMP GP-ENGINE OIL
253-1461 Y	[6]	PUMP GP-FUEL INJECTION
228-5812 Y	[1]	PUMP GP-WATER
354-0042 Y	[1]	SENSOR GP-ENGINE (TEMPERATURE, PRESSURE)
240-7272 Y	[1]	VALVE MECHANISM GP
230-0961 Y	[1]	WIRING GP-UNIT INJECTOR
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP42050015

356-2434: ENGINE AR-CORE

ENGINE AR-CORE

356-2434 ENGINE AR-CORE
S/N TXF114-UP
PART OF 280-3645 ENGINE AR-COMPLETE

i04393774 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
356-2433 Y	[1]	ENGINE AR-CORE
355-7396 Y	[1]	PLATE & FILM GP
220-5004	[1]	ELECTRONICS GP-ENGINE RATINGS
Y		SEPARATE ILLUSTRATION

#SEBP42050016

253-8291: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

253-8291 INSTALLATION AR-ENGINE
S/N ESD1-UP; TDG1-UP; PJW1-UP
PART OF 238-5607, 248-0888, 248-0889 GENERAL AR

i02703742 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
233-1275 Y	[1]	AIR CLEANER & MOUNTING GP
245-7786 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
239-6581 Y	[1]	COOLER GP-FUEL
279-7821 Y	[1]	DRAIN GP-MUFFLER
		S/N ESD214-UP; PJW1655-UP; TDG333-UP
131-8849 Y	[1]	EXTENSION GP-EXHAUST
210-8162 Y	[1]	FAN GP-SUCTION
222-8357 Y	[1]	LINES GP-AIR (AIR CLEANER, TURBOCHARGER)
210-8163 Y	[1]	LINES GP-AIR (TURBOCHARGER, AFTERCOOLER)
222-8360 Y	[1]	LINES GP-ENGINE OIL DRAIN
222-8359 Y	[1]	LINES GP-MUFFLER DRAIN
		S/N ESD1-213; PJW1-1654; TDG1-332
222-8358 Y	[1]	MOUNTING GP-ENGINE
222-8362 Y	[1]	MOUNTING GP-ENGINE OIL FILTER
210-8161 Y	[1]	RADIATOR & HYD OIL COOLER GP
Y		SEPARATE ILLUSTRATION

#SEBP42050017

267-0010: BASE GP-VALVE COVER

BASE GP-VALVE COVER

267-0010 BASE GP-VALVE COVER -ENGINE
S/N MHX1-1279
PART OF 267-0009 ENGINE AR-CORE

i02284194 SEBP4205

2670010 BASE GP-VALVE COVER Parts scheme

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-1538	[2]	DOWEL
2.	248-6661	[1]	BASE
3.	132-5789	[1]	CLIP (LADDER)
4.	6V-3918 M	[13]	BOLT (M8X1.25X50-MM)
5.	9M-1974	[13]	WASHER-HARD (8.8X16X2-MM THK)
6.	5P-5678 D		SEAL (3-M)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP42050018

267-0010: BASE GP-VALVE COVER

BASE GP-VALVE COVER

267-0010 BASE GP-VALVE COVER -ENGINE
S/N TXF114-UP; MHX1-UP
PART OF 267-0009, 317-9990, 356-2433 ENGINE AR-CORE

i02515647 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	272-0389 C	[1]	SEAL
2.	281-0786 C	[1]	BASE AS
2A.	180-1538	[2]	DOWEL
3.	132-5789	[1]	CLIP (LADDER)
4.	6V-3918 M	[13]	BOLT (M8X1.25X50-MM)
5.	9M-1974	[13]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP42050019

267-0010: BASE GP-VALVE COVER

BASE GP-VALVE COVER

267-0010 BASE GP-VALVE COVER -ENGINE
S/N TXF1-UP; MHX1-UP
PART OF 317-9990, 356-2433 ENGINE AR-CORE
Type 1

i05354541 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	272-0389	[1]	SEAL
2.	325-4505 CY	[1]	BASE GP-VALVE COVER
3.	132-5789	[1]	CLIP (LADDER)
4.	6V-3918 M	[7]	BOLT (M8X1.25X50-MM)
5.	6V-5221 CM	[6]	BOLT (M8X1.25X80-MM)
6.	9M-1974 C	[13]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Emissions Certification Film
345C Excavator

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
C11 and C13 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

REMAN SHORT AND LONG BLOCKS FOR C7, C11, C13, & C15 ENGINES WITH ACERT� TECHNOLOGY
REMAN SHORT AND LONG BLOCKS FOR C7, C11, C13, & C15 ENGINES WITH ACERT� TECHNOLOGY

CAT REMAN ANNOUNCES SHORT BLOCK OPTIONS FOR CAT� C9, C11, AND C13 MACHINE APPLICATIONS
CAT REMAN ANNOUNCES SHORT BLOCK OPTIONS FOR CAT� C9, C11, AND C13 MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITION OF LONG BLOCKS TO PREVIOUSLY ANNOUNCED SHORT BLOCK OPTIONS FOR CAT� C13 MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITION OF LONG BLOCKS TO PREVIOUSLY ANNOUNCED SHORT BLOCK OPTIONS FOR CAT� C13 MACHINE APPLICATIONS

C32 SHORT BLOCK UPDATE AND ADDITIONAL REMAN ENGINES FOR MINING AND OTHER CAT MACHINES
C32 SHORT BLOCK UPDATE AND ADDITIONAL REMAN ENGINES FOR MINING AND OTHER CAT MACHINES

CAT REMAN ANNOUNCES ADDITIONAL 3176, C9, C11, C13 AND C15 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL 3176, C9, C11, C13 AND C15 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)

CAT REMAN ANNOUNCES ADDITIONAL C11, C13, C15, C18, C27 AND C32 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL C11, C13, C15, C18, C27 AND C32 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)

Service Letter-APD

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}

Troubleshooting

Low Engine Oil Pressure
C11 and C13 Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
C11 and C13 Engines for Caterpillar Built Machines

Excessive White Smoke
C11 and C13 Engines for Caterpillar Built Machines

Excessive Black Smoke
C11 and C13 Engines for Caterpillar Built Machines

Engine Cranks but Will Not Start
C11 and C13 Engines for Caterpillar Built Machines

Poor Acceleration or Response
C11 and C13 Engines for Caterpillar Built Machines

Low Power/Poor or No Response to Throttle
C11 and C13 Engines for Caterpillar Built Machines

Engine Vibration
C11 and C13 Engines for Caterpillar Built Machines

Excessive Fuel Consumption
C11 and C13 Engines for Caterpillar Built Machines

Engine Misfires, Runs Rough or Is Unstable
C11 and C13 Engines for Caterpillar Built Machines

E362 Engine Overspeed
C11 and C13 Engines for Caterpillar Built Machines

Engine Will Not Crank
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Hydraulic System Pressure - Release
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Engine Oil Cooler - Remove and Install - In Chassis
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Engine - Remove
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Engine - Install
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Service Magazine

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Cat® Reman Announces the Addition of Two C11, One C13, Three C15, and Three C18 Machine Engines {1000}
2014/07/18

Cat® Reman Now Offers Additional C11, C13, C15, C18, and C32 Engine Options for Certain Cat® Machine Applications {1000}
2015/07/10

Cat® Reman Announces Additional Engine Options for Certain Cat Machine Applications {1000}
2015/06/18

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/22

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 345C :

241-5774 ENGINE AR

220-2524 SPECIAL AR-HEAVY LIFT

248-0889 GENERAL AR

248-0888 GENERAL AR

238-5607 GENERAL AR

257-4584 CONVERSION AR-MACHINE

248-0892 CHASSIS AR

248-0891 CHASSIS AR

280-3645 ENGINE AR-COMPLETE

267-0009 ENGINE AR-CORE

317-9990 ENGINE AR-CORE

356-2433 ENGINE AR-CORE

356-2434 ENGINE AR-CORE

253-8291 INSTALLATION AR-ENGINE

267-0010 BASE GP-VALVE COVER

Truck sale:

Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI

70,587

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.

70,255

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.