225-4533 CYLINDER & SEAL GP-CTWT S/N ESD1-UP; TDG1-UP; PJW1-UP PART OF 246-2786, 246-2789, 254-6871, 254-6872, 271-8576 COUNTERWEIGHT AR AN ATTACHMENT 345C

HYDRAULIC SYSTEM

CYLINDER GP

0. 225-4533 CYLINDER &
1. 225-4525 CYLINDER &
2. 225-4525 CYLINDER &
3. 225-4525 CYLINDER &
4. 242-6838 CYLINDER &
5. 225-4523 CYLINDER G
6. 389-1041 CYLINDER G
7. 225-4529 CYLINDER G
8. 225-4529 CYLINDER G
9. 225-4532 CYLINDER G
0. INFORMATION

EXCAVATOR 345C EXCAVATOR ESD
345C L Hydraulic Excavator ESD00001-UP (MACHINE) POWERED BY C13 Engine SEBP4205 345C ESD (2004)

HYDRAULIC SYSTEM

CYLINDER GP

358-8502 CYLINDER & SEAL GP-BUCKET

359-4372 CYLINDER & SEAL GP-BUCKET

225-4533 CYLINDER & SEAL GP-CTWT

225-4525 CYLINDER & SEAL GP-STICK

#SEBP42050550

225-4533: CYLINDER & SEAL GP-CTWT

CYLINDER & SEAL GP-CTWT

225-4533 CYLINDER & SEAL GP-CTWT
S/N ESD1-UP; TDG1-UP; PJW1-UP
PART OF 246-2786, 246-2789, 254-6871, 254-6872, 271-8576 COUNTERWEIGHT AR
AN ATTACHMENT

i02158557 SEBP4205

2254533 CYLINDER & SEAL GP-CTWT Parts scheme

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	093-1434	[4]	SEAL-LIP TYPE
2.	236-9769 Y	[1]	CYLINDER GP-COUNTERWEIGHT
3.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
	Y		SEPARATE ILLUSTRATION

#SEBP42050551

225-4525: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

225-4525 CYLINDER & SEAL GP-STICK
S/N ESD1-UP; TDG1-UP; PJW1-UP
PART OF 225-4524 CYLINDER & LINES GP-STICK
Type 1
AN ATTACHMENT

i02155087 SEBP4205

2254525 CYLINDER & SEAL GP-STICK Parts scheme

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4526 Y	[1]	CYLINDER GP-STICK
2.	9X-4597	[4]	SEAL-LIP TYPE
3.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	Y		SEPARATE ILLUSTRATION

#SEBP42050552

225-4525: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

225-4525 CYLINDER & SEAL GP-STICK
S/N ESD1-UP; TDG1-UP; PJW1-UP
PART OF 225-4524 CYLINDER & LINES GP-STICK
Type 2
AN ATTACHMENT

i05319308 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	370-6692 CY	[1]	CYLINDER GP-STICK
2.	9X-4597	[4]	SEAL-LIP TYPE
3.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP42050553

225-4525: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

225-4525 CYLINDER & SEAL GP-STICK
S/N ESD1-UP; TDG1-UP; PJW1-UP
PART OF 225-4524 CYLINDER & LINES GP-STICK
Type 3
AN ATTACHMENT

i07083956 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	513-3691 CY	[1]	CYLINDER GP-STICK
2.	166-1496	[4]	SEAL-LIP TYPE
3.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP42050554

242-6838: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

242-6838 CYLINDER & SEAL GP-STICK
S/N ESD1-UP; TDG1-UP; PJW1-UP
PART OF 242-6837 CYLINDER & LINES GP-STICK
AN ATTACHMENT

i02155660 SEBP4205

2426838 CYLINDER & SEAL GP-STICK Parts scheme

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	242-6839 Y	[1]	CYLINDER GP-STICK
2.	9X-4597	[4]	SEAL-LIP TYPE
3.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	Y		SEPARATE ILLUSTRATION

#SEBP42050555

225-4523: CYLINDER GP-BOOM

CYLINDER GP-BOOM

225-4523 CYLINDER GP-BOOM
S/N ESD1-UP; TDG1-UP; PJW1-UP
160-MM (6.3-IN) BORE X 1575-MM (62-IN) STROKE
PART OF 225-4522 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT

i02161472 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-3604 J	[1]	SEAL AS
2.	123-2112 M	[1]	LOCKNUT-SPECIAL (M90X2-THD)
3.	126-2084	[1]	STOP
4.	191-3128 J	[1]	RING-SEAL
5.	225-4617	[1]	CYLINDER AS
5A.	228-5620	[1]	BUSHING
6.	234-4463	[1]	ROD AS
6A.	235-7527	[1]	BUSHING
7.	7Y-4941 J	[1]	RING-BACKUP
8.	7Y-4944	[1]	RING-RETAINING
9.	358-8528	[1]	HEAD
10.	333-8687 J	[1]	SEAL-BUFFER
11.	165-9291 J	[1]	SEAL-LIP TYPE
12.	185-0230 J	[2]	RING
13.	185-0231 J	[1]	RING
14.	185-0232	[1]	PISTON
15.	087-5550 J	[1]	RING-BACKUP
16.	095-1635 J	[1]	SEAL-O-RING
17.	114-0762	[1]	BUSHING
18.	333-8688 J	[1]	SEAL-U-CUP
19.	7Y-5239 M	[8]	BOLT-SOCKET HEAD (M24X3X100-MM)

			AVAILABLE REPAIR KIT(S):
	376-4336 J	[1]	KIT-SEAL (CYLINDER)(BOOM CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42050556

389-1041: CYLINDER GP-BOOM

CYLINDER GP-BOOM

389-1041 CYLINDER GP-BOOM
S/N ESD1-UP; TDG1-UP; PJW1-UP
160-MM (6.3-IN) BORE X 1575-MM (62-IN) STROKE
PART OF 225-4522 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT

i05982178 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	123-2112 M	[1]	LOCKNUT-SPECIAL (M90X2-THD)
2.	191-3128 J	[1]	RING-SEAL
3.	333-8687 J	[1]	SEAL-BUFFER
4.	358-8527	[1]	PISTON
5.	358-8528	[1]	HEAD
6.	381-0454	[1]	CYLINDER AS
6A.	228-5620	[1]	BUSHING
7.	389-1056	[1]	ROD AS
7A.	235-7527	[1]	BUSHING
8.	389-1066	[1]	STOP
9.	087-5550 J	[1]	RING-BACKUP
10.	095-1635 J	[1]	SEAL-O-RING
11.	114-0762	[1]	BUSHING
12.	165-9291 J	[1]	SEAL-LIP TYPE
13.	185-0230	[2]	RING
14.	185-0231 J	[1]	RING
15.	333-8688 J	[1]	SEAL-U-CUP
16.	7Y-4941 J	[1]	RING-BACKUP
17.	7Y-4944 J	[1]	RING-RETAINING
18.	7Y-5239 M	[8]	BOLT-SOCKET HEAD (M24X3X100-MM)
19.	9X-3604 J	[1]	SEAL AS

			AVAILABLE REPAIR KIT(S):
	376-4336	[1]	KIT-SEAL (CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42050557

225-4529: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

225-4529 CYLINDER GP-BUCKET
S/N ESD1-UP; TDG1-UP; PJW1-UP
160-MM (6.30-IN) BORE X 1356-MM (53.39-IN) STROKE
PART OF 225-4528 CYLINDER & SEAL GP-BUCKET
Type 1
FIELD REPLACEMENT ORDER @@@@@358-8482@@@@@
AN ATTACHMENT

i02155510 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-3604 J	[1]	SEAL AS
2.	118-3936	[1]	CYLINDER AS
2A.	087-5533	[1]	BUSHING
3.	7Y-4944	[1]	RING-RETAINING
4.	087-5551	[1]	HEAD
5.	123-2105	[1]	ROD AS
5A.	087-5548	[1]	BUSHING
6.	123-2112 M	[1]	LOCKNUT-SPECIAL (M90X2-THD)
7.	128-9266 J	[1]	SEAL-BUFFER
8.	165-9291 J	[1]	SEAL-LIP TYPE
9.	185-0230 J	[2]	RING
10.	185-0231 J	[1]	RING
11.	185-0232	[1]	PISTON
12.	087-5550 J	[1]	RING-BACKUP
13.	095-1635 J	[1]	SEAL-O-RING
14.	114-0762	[1]	BUSHING
15.	170-9865 J	[1]	SEAL-U-CUP
16.	7Y-4941 J	[1]	RING-BACKUP
17.	7Y-5239 M	[8]	BOLT-SOCKET HEAD (M24X3X100-MM)

			AVAILABLE REPAIR KIT(S):
	225-4625 J	[1]	KIT-SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42050558

225-4529: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

225-4529 CYLINDER GP-BUCKET
S/N ESD1-UP; TDG1-UP; PJW1-UP
160-MM (6.30-IN) BORE X 1356-MM (53.39-IN) STROKE
PART OF 225-4528 CYLINDER & SEAL GP-BUCKET
Type 2
FIELD REPLACEMENT ORDER @@@@@358-8482@@@@@
AN ATTACHMENT

i02224815 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-3604 J	[1]	SEAL AS
2.	118-3936	[1]	CYLINDER AS
2A.	087-5533	[1]	BUSHING
3.	7Y-4944	[1]	RING-RETAINING
4.	358-8528	[1]	HEAD
5.	247-8904 C	[1]	ROD AS
5A.	087-5548	[1]	BUSHING
6.	123-2112 M	[1]	LOCKNUT-SPECIAL (M90X2-THD)
7.	128-9266 J	[1]	SEAL-BUFFER
8.	165-9291 J	[1]	SEAL-LIP TYPE
9.	185-0230 J	[2]	RING
10.	185-0231 J	[1]	RING
11.	185-0232	[1]	PISTON
12.	087-5550 J	[1]	RING-BACKUP
13.	095-1635 J	[1]	SEAL-O-RING
14.	114-0762	[1]	BUSHING
15.	170-9865 J	[1]	SEAL-U-CUP
16.	7Y-4941 J	[1]	RING-BACKUP
17.	7Y-5239 M	[8]	BOLT-SOCKET HEAD (M24X3X100-MM)

			AVAILABLE REPAIR KIT(S):
	225-4625 J	[1]	KIT-SEAL (BUCKET CYLINDER)
			(ALSO INCLUDES SEAL RING)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42050559

225-4532: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

225-4532 CYLINDER GP-BUCKET
S/N ESD1-UP; TDG1-UP; PJW1-UP
170-MM (6.69-IN) BORE X 1396-MM (54.96-IN) STROKE
PART OF 225-4531 CYLINDER & SEAL GP-BUCKET
FIELD REPLACEMENT ORDER @@@@@358-8503@@@@@
AN ATTACHMENT

i02155280 SEBP4205

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	358-8521	[1]	HEAD
2.	7Y-4956 M	[1]	LOCKNUT (M90X2-THD)
3.	9X-3607 J	[1]	SEAL AS
4.	358-8514	[1]	ROD AS
4A.	4I-1520	[1]	BUSHING
5.	234-4516	[1]	CYLINDER AS
5A.	087-5379	[1]	BUSHING
6.	7Y-4941 J	[1]	RING-BACKUP
7.	7Y-4944	[1]	RING-RETAINING
8.	333-8687 J	[1]	SEAL-BUFFER
9.	165-9291 J	[1]	SEAL-LIP TYPE
10.	191-5603	[1]	PISTON
11.	191-5604 J	[2]	RING
12.	191-5605 J	[1]	RING
13.	095-1726 J	[1]	SEAL-O-RING
14.	114-0761	[1]	BUSHING
15.	333-8688 J	[1]	SEAL-U-CUP
16.	7Y-4945 J	[1]	RING-BACKUP
17.	7Y-5239 M	[8]	BOLT-SOCKET HEAD (M24X3X100-MM)

			AVAILABLE REPAIR KIT(S):
	333-8675 J		KIT-SEAL (BUCKET CYLINDER)
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345B, 345C, 365C L MH, AND 385C L MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345B, 345C, 365C L MH, AND 385C L MH EXCAVATORS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ASSEMBLY ON CERTAIN 345C, 345D, 349D, AND 349E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ASSEMBLY ON CERTAIN 345C, 345D, 349D, AND 349E EXCAVATORS

Service Letter-Australia

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

Service Letter-CFEL

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

Service Letter-Americas

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}

Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}

Verification of the Cylinder Drift for the Bucket Cylinder on Certain Excavators{5457}
Verification of the Cylinder Drift for the Bucket Cylinder on Certain Excavators{5457}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}

Specifications

Boom Cylinder Lines - Left Hand
345C Excavator and 345C Material Handler Machine System Specifications

Boom Cylinder Lines - Right Hand
345C Excavator and 345C Material Handler Machine System Specifications

Boom Cylinder
345C Excavator and 345C Material Handler Machine System Specifications

Stick Cylinder
345C Excavator and 345C Material Handler Machine System Specifications

Boom Cylinder Lines
345C Excavator and 345C Material Handler Machine System Specifications

Stick Cylinder
345C Excavator and 345C Material Handler Machine System Specifications

Boom Lines - Long Reach Boom
345C Excavator and 345C Material Handler Machine System Specifications

Boom Cylinder Lines - Boom Lowering Control
345C Excavator and 345C Material Handler Machine System Specifications

Bucket Cylinder
345C Excavator and 345C Material Handler Machine System Specifications

Boom Lines
345C Excavator and 345C Material Handler Machine System Specifications

Bucket Cylinder
345C Excavator and 345C Material Handler Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

Service Letter-Asia

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

Systems Operation

Cylinders (Boom, Stick and Bucket)
345C Excavator Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 7Y-4945 AND 087-5550 BACK-UP RINGS FROM DEALER PARTS STOCK

PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK CYLINDER ON CERTAIN 345C EXCAVATORS

Testing and Adjusting

Cylinder Speed - Check
345C Excavator Hydraulic System

Cylinder Drift - Check - Empty Bucket
345C Excavator Hydraulic System

Cylinder Drift - Check - Loaded Bucket
345C Excavator Hydraulic System

Relief Valve (Counterweight Cylinder) - Test and Adjust
345C Excavator Hydraulic System

Bench Test Procedures

Disassembly and Assembly

Boom Cylinder - Remove and Install
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems

Counterweight Cylinder - Remove and Install
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems

Stick Cylinder - Remove and Install
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems

Bucket Cylinder - Remove and Install
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

New Hydraulic Cylinders for the Stick Improve the Reliability {5458}
2008/12/22

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

Cylinder Rod Seals Have Been Improved for Certain Excavators {5457}
2009/07/06

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}

Improved Seal Kits are Now Used on Certain Excavators {5456, 5457, 5458}
2011/11/18

New Cylinder Head Bolts are Now Used on Certain Excavators {5456, 5457, 5458}
2015/06/17

Improvements to the Manufacturing Process of the Stick Cylinder Assembly have been Made and are Now Used on Certain Excavators {5458}
2015/03/31

New Bolts are Now Used for the Stick Cylinder Head on Certain Excavators {5458}
2015/09/25

Caterpillar Parts SIS Catalog 345C :

359-4372 CYLINDER & SEAL GP-BUCKET

358-8502 CYLINDER & SEAL GP-BUCKET

357-9783 CYLINDER & SEAL GP-BUCKET

225-4531 CYLINDER & SEAL GP-BUCKET

225-4528 CYLINDER & SEAL GP-BUCKET

225-4522 CYLINDER & SEAL GP-BOOM

242-6837 CYLINDER & LINES GP-STICK

225-4525 CYLINDER & SEAL GP-STICK

242-6838 CYLINDER & SEAL GP-STICK

225-4523 CYLINDER GP-BOOM

389-1041 CYLINDER GP-BOOM

225-4529 CYLINDER GP-BUCKET

Truck sale:

Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI

70,587

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.

70,255

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.