345C Fixed Cab Riser Material Handler M2R00001-UP (MACHINE) POWERED BY C13 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

EXCAVATOR 345C MH EXCAVATOR M2R
345C Fixed Cab Riser Material Handler M2R00001-UP (MACHINE) POWERED BY C13 Engine SEBP4208 345C MH M2R (2005)

Parts group 345C MH:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALARM GP

132-1829 ALARM GP

132-1829 ALARM GP
S/N M2R187-UP
24-VOLT
PART OF 253-6149 WIRING GP-CAB

231-1771 ALARM GP-TRAVEL

231-1771 ALARM GP-TRAVEL -BACKUP
S/N M2R1-UP
PART OF 252-9286 CHASSIS AR

ALTERNATOR GP-CHARGING

117-0177 PULLEY GP-FAN & ALT DRIVE

117-0177 PULLEY GP-FAN & ALT DRIVE
S/N TXF114-UP; MHX1-UP
3.34:1 DRIVE RATIO. 68.5 MM (2.9 IN) DIAMETER, 8 GROOVE
PART OF 241-8344, 280-3645, 424-8400, 424-8402, 424-8403, 424-8404, 424-8405, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH 22.19 MM (0.87 IN) DIAMETER ALTERNATOR SHAFT WITH OR WITHOUT KEY, 228.5 MM (9.0 IN) DIAMETER CRANKSHAFT PULLEY

235-7133 ALTERNATOR GP-CHARGING

235-7133 ALTERNATOR GP-CHARGING
S/N TXF1-UP; MHX1-UP
24-VOLT, 80-AMPERE
PART OF 252-7132 ALTERNATOR GP-CHARGING

252-7132 ALTERNATOR GP-CHARGING

252-7132 ALTERNATOR GP-CHARGING
S/N TXF114-UP; MHX1-UP
80-AMPERE
PART OF 241-8344, 280-3645, 424-8400, 424-8402, 424-8403, 424-8404, 424-8405, 424-8407 ENGINE AR-COMPLETE

BATTERY GP

255-0637 BATTERY & WIRING GP

255-0637 BATTERY & WIRING GP
S/N M2R1-151
PART OF 252-9286 CHASSIS AR

255-0637 BATTERY & WIRING GP

255-0637 BATTERY & WIRING GP
S/N M2R152-UP
PART OF 252-9286 CHASSIS AR
Type 1

255-0637 BATTERY & WIRING GP

255-0637 BATTERY & WIRING GP
S/N M2R152-UP
PART OF 252-9286 CHASSIS AR
Type 2

ELECTRONICS GP-ENGINE

249-5278 CONTROL & MTG GP-ENGINE ELEK

249-5278 CONTROL & MTG GP-ENGINE ELEK
S/N TXF114-UP; MHX1-UP
PART OF 241-8344, 280-3645, 424-8400, 424-8402, 424-8403, 424-8404, 424-8405, 424-8407 ENGINE AR-COMPLETE

ELECTRONICS GP-MACHINE

221-8820 CONTROL & MTG GP-MACHINE

221-8820 CONTROL & MTG GP-MACHINE
S/N M2R1-182
PART OF 252-9286 CHASSIS AR

280-2224 CONTROL & MTG GP-MACHINE

280-2224 CONTROL & MTG GP-MACHINE
S/N M2R183-UP
PART OF 252-9286 CHASSIS AR
Type 1

280-2224 CONTROL & MTG GP-MACHINE

280-2224 CONTROL & MTG GP-MACHINE
S/N M2R183-UP
PART OF 252-9286 CHASSIS AR
Type 2

280-2224 CONTROL & MTG GP-MACHINE

280-2224 CONTROL & MTG GP-MACHINE
S/N M2R183-UP
PART OF 252-9286 CHASSIS AR
Type 3

270-5506 CONTROL GP-MACHINE

270-5506 CONTROL GP-MACHINE
S/N M2R183-UP
PART OF 280-2224 CONTROL & MTG GP-MACHINE

337-7951 ELECTRONICS GP-MACHINE

337-7951 ELECTRONICS GP-MACHINE -GENERATOR SET
S/N M2R1-UP
PART OF 255-4403 GENERATOR AR-HYDRAULIC

CONTROL GP-UNPROGRAMMED

239-9954 CONTROL GP-UNPROGRAMMED

239-9954 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 300
S/N M2R1-UP
8-VOLT
PART OF 302-8523 CONTROL & MTG GP-COMMUNICATION

GENERATOR GP

205-6343 CONTROL GP-HYDRAULIC GENERATOR

205-6343 CONTROL GP-HYDRAULIC GENERATOR
S/N M2R1-UP
PART OF 255-4408 GENERATOR GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@318-9582@@@@@, @@@@@318-9583@@@@@, @@@@@318-9584@@@@@

318-9582 CONTROL GP-HYDRAULIC GENERATOR

318-9582 CONTROL GP-HYDRAULIC GENERATOR -15-KW
S/N M2R1-UP
FIELD REPLACEMENT FOR @@@@@205-6343@@@@@

318-9583 CONTROL GP-HYDRAULIC GENERATOR

318-9583 CONTROL GP-HYDRAULIC GENERATOR -20-KW
S/N M2R1-UP
FIELD REPLACEMENT FOR @@@@@205-6343@@@@@

318-9584 CONTROL GP-HYDRAULIC GENERATOR

318-9584 CONTROL GP-HYDRAULIC GENERATOR -25-KW
S/N M2R1-UP
FIELD REPLACEMENT FOR @@@@@205-6343@@@@@

255-4403 GENERATOR AR-HYDRAULIC

255-4403 GENERATOR AR-HYDRAULIC
S/N M2R1-UP

189-2990 GENERATOR GP-HYDRAULIC

189-2990 GENERATOR GP-HYDRAULIC
S/N M2R1-UP
25-KW
PART OF 308-0152 GENERATOR GP-HYDRAULIC

255-4408 GENERATOR GP-HYDRAULIC

255-4408 GENERATOR GP-HYDRAULIC
S/N M2R1-UP
25-KW
PART OF 255-4403 GENERATOR AR-HYDRAULIC

308-0152 GENERATOR GP-HYDRAULIC

308-0152 GENERATOR GP-HYDRAULIC
S/N M2R1-UP
25-KW
PART OF 255-4403 GENERATOR AR-HYDRAULIC

223-9061 BRACE GP

223-9061 BRACE GP
S/N M2R1-UP
PART OF 254-3900 RISER GP-CAB

251-8483 MOTOR GP-HYDRAULIC GENERATOR

251-8483 MOTOR GP-HYDRAULIC GENERATOR
S/N M2R1-UP
PART OF 255-4408, 308-0152 GENERATOR GP-HYDRAULIC

LIGHTING GP

153-2521 LAMP GP-FLOOD

153-2521 LAMP GP-FLOOD
S/N M2R1-UP
24-VOLT
PART OF 255-4316 LIGHTING GP-FLOOD

153-2523 LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD
S/N M2R1-UP
24-VOLT
PART OF 261-4485 LIGHTING GP-CHASSIS

219-6485 LAMP GP-FLOOD

219-6485 LAMP GP-FLOOD
S/N M2R1-UP
24-VOLT, 70-WATT
PART OF 255-4316 LIGHTING GP-FLOOD

261-4485 LIGHTING GP-CHASSIS

261-4485 LIGHTING GP-CHASSIS -FRONT, RH
S/N M2R1-UP
PART OF 252-9286 CHASSIS AR

163-6772 LIGHTING GP-FLOOD

163-6772 LIGHTING GP-FLOOD -CAB
S/N M2R1-UP
PART OF 258-7942, 356-6719 CAB GP

255-4316 LIGHTING GP-FLOOD

255-4316 LIGHTING GP-FLOOD -BOOM, STICK
S/N M2R1-UP
PART OF 255-2861 BOOM AR-MATERIAL HANDLING
Type 1

255-4316 LIGHTING GP-FLOOD

255-4316 LIGHTING GP-FLOOD -BOOM, STICK
S/N M2R1-UP
PART OF 255-2861 BOOM AR-MATERIAL HANDLING
Type 2

PANEL GP-CIRCUIT BREAKER

259-0035 PANEL & MTG GP-CIRCUIT BREAKER

259-0035 PANEL & MTG GP-CIRCUIT BREAKER
S/N M2R1-UP
PART OF 252-9286 CHASSIS AR

255-8323 PANEL GP-CIRCUIT BREAKER

255-8323 PANEL GP-CIRCUIT BREAKER
S/N M2R1-UP
PART OF 259-0035 PANEL & MTG GP-CIRCUIT BREAKER

SENSOR GP

260-2192 SENSOR AS-PRESSURE

260-2192 SENSOR AS-PRESSURE
S/N M2R1-UP
PART OF 227-0445 LINES GP-PILOT

231-1975 SENSOR GP-ENGINE

231-1975 SENSOR GP-ENGINE
S/N MHX1-UP
PART OF 241-8344 ENGINE AR-COMPLETE
Type 1

231-1975 SENSOR GP-ENGINE

231-1975 SENSOR GP-ENGINE
S/N MHX1-UP
PART OF 241-8344, 280-3645 ENGINE AR-COMPLETE
Type 2

243-1555 SENSOR GP-ENGINE

243-1555 SENSOR GP-ENGINE
S/N MHX1159-UP
PART OF 241-8344, 280-3645 ENGINE AR-COMPLETE

354-0042 SENSOR GP-ENGINE

354-0042 SENSOR GP-ENGINE
S/N TXF1-UP; MHX10192-UP
PART OF 280-3645 ENGINE AR-COMPLETE, 356-2433 ENGINE AR-CORE
FOR USE WITH @@@@@354-0048@@@@@

354-0042 SENSOR GP-ENGINE

354-0042 SENSOR GP-ENGINE
S/N TXF1-UP
PART OF 356-2433 ENGINE AR-CORE
Type 1
FOR USE WITH @@@@@354-0048@@@@@

354-0042 SENSOR GP-ENGINE

354-0042 SENSOR GP-ENGINE
S/N TXF1-UP
PART OF 356-2433 ENGINE AR-CORE
Type 2
FOR USE WITH @@@@@354-0048@@@@@

178-2345 SENSOR GP-LIQUID LEVEL

178-2345 SENSOR GP-LIQUID LEVEL
S/N M2R1-334
WATER IN FUEL
PART OF 222-8367 SENSOR GP-LIQUID LEVEL
OPTIONAL FIELD REPLACEMENT ORDER @@@@@382-2001@@@@@

222-8367 SENSOR GP-LIQUID LEVEL

222-8367 SENSOR GP-LIQUID LEVEL
S/N M2R1-334
PART OF 252-9286 CHASSIS AR

222-8367 SENSOR GP-LIQUID LEVEL

222-8367 SENSOR GP-LIQUID LEVEL
S/N M2R335-UP
PART OF 252-9286 CHASSIS AR

382-2001 SENSOR GP-LIQUID LEVEL

382-2001 SENSOR GP-LIQUID LEVEL
S/N M2R335-UP
WATER IN FUEL
PART OF 222-8367 SENSOR GP-LIQUID LEVEL
FIELD REPLACEMENT FOR @@@@@178-2345@@@@@

194-6722 SENSOR GP-PRESSURE

194-6722 SENSOR GP-PRESSURE
S/N MHX1-UP
PART OF 239-2395 SENSOR GP-PRESSURE
OPTIONAL FIELD REPLACEMENT ORDER 274-6717 SENSOR-PRESSURE

194-6725 SENSOR GP-PRESSURE

194-6725 SENSOR GP-PRESSURE
S/N MHX1-UP
PART OF 239-2396 SENSOR GP-PRESSURE

239-2395 SENSOR GP-PRESSURE

239-2395 SENSOR GP-PRESSURE
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE

239-2396 SENSOR GP-PRESSURE

239-2396 SENSOR GP-PRESSURE
S/N MHX1-UP
PART OF 246-3265 FILTER GP-FUEL, 231-1975, 243-1555 SENSOR GP-ENGINE

239-3478 SENSOR GP-PRESSURE

239-3478 SENSOR GP-PRESSURE
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE, 239-5674 SENSOR GP-PRESSURE

239-5674 SENSOR GP-PRESSURE

239-5674 SENSOR GP-PRESSURE
S/N MHX1-1160
PART OF 231-1975 SENSOR GP-ENGINE

249-0096 SENSOR GP-PRESSURE

249-0096 SENSOR GP-PRESSURE
S/N TXF1-UP; MHX1-UP
PART OF 354-0042 SENSOR GP-ENGINE

276-8548 SENSOR GP-PRESSURE

276-8548 SENSOR GP-PRESSURE
S/N TXF1-UP; MHX1-UP
AMPSEAL CONNECTOR
PART OF 354-0042 SENSOR GP-ENGINE

276-9067 SENSOR GP-PRESSURE

276-9067 SENSOR GP-PRESSURE
S/N TXF1-UP; MHX1-UP
AMPSEAL CONNECTOR
PART OF 354-0042 SENSOR GP-ENGINE

230-7149 SENSOR GP-SPEED

230-7149 SENSOR GP-SPEED
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE

239-2397 SENSOR GP-SPEED

239-2397 SENSOR GP-SPEED
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE

300-9805 SENSOR GP-SPEED

300-9805 SENSOR GP-SPEED
S/N TXF1-UP; MHX10192-UP
PART OF 354-0042 SENSOR GP-ENGINE, 384-1836 SENSOR GP-SPEED

300-9806 SENSOR GP-SPEED

300-9806 SENSOR GP-SPEED
S/N TXF1-UP; MHX1-UP
PART OF 354-0042 SENSOR GP-ENGINE

318-1181 SENSOR GP-SPEED

318-1181 SENSOR GP-SPEED
S/N TXF114-UP; MHX1-UP
MAGNETIC, LOW OUTPUT
PART OF 220-7122 HOUSING GP-FLYWHEEL

384-1836 SENSOR GP-SPEED

384-1836 SENSOR GP-SPEED
S/N TXF1-UP
PART OF 354-0042 SENSOR GP-ENGINE

4P-5820 SENSOR GP-SPEED

4P-5820 SENSOR GP-SPEED
S/N TXF1-UP
MAGNETIC, LOW OUTPUT
PART OF 313-2148 HOUSING GP-FLYWHEEL

197-8391 SENSOR GP-TEMPERATURE

197-8391 SENSOR GP-TEMPERATURE
S/N MHX1-1281
PART OF 246-3265 FILTER GP-FUEL, 231-1975 SENSOR GP-ENGINE

197-8392 SENSOR GP-TEMPERATURE

197-8392 SENSOR GP-TEMPERATURE
S/N MHX1-1160
COOLANT, WATER
PART OF 231-1975 SENSOR GP-ENGINE

234-5012 SENSOR GP-TEMPERATURE

234-5012 SENSOR GP-TEMPERATURE
S/N TXF1-UP; MHX1-UP
PART OF 354-0042 SENSOR GP-ENGINE

234-5013 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
S/N TXF1-UP; MHX1-UP
PART OF 246-3265 FILTER GP-FUEL, 356-1881 PUMP GP-FUEL PRM & PRIM FILTER, 354-0042 SENSOR GP-ENGINE

274-7395 SENSOR GP-TEMPERATURE

274-7395 SENSOR GP-TEMPERATURE
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE

274-7396 SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE

STARTING AID GP

222-8365 STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N M2R1-182
PART OF 252-9286 CHASSIS AR

222-8365 STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N M2R183-220
PART OF 252-9286 CHASSIS AR

222-8365 STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N M2R221-UP
PART OF 252-9286 CHASSIS AR

239-1134 VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
S/N M2R1-UP
24-VOLT, CONTINUOUS
PART OF 222-8365 STARTING AID GP-ETHER

STARTING MOTOR GP

3T-9525 PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
S/N TXF114-UP; MHX1-UP
PART OF 269-2757, 348-7651 STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC
S/N TXF114-9941; MHX1-UP
24-VOLT
PART OF 269-4977 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@348-7651@@@@@

269-4977 STARTING MOTOR GP-ELECTRIC

269-4977 STARTING MOTOR GP-ELECTRIC
S/N TXF114-9941; MHX1-UP
24-VOLT
PART OF 241-8344, 280-3645, 424-8400, 424-8402, 424-8403, 424-8404 ENGINE AR-COMPLETE

348-7651 STARTING MOTOR GP-ELECTRIC

348-7651 STARTING MOTOR GP-ELECTRIC
S/N TXF9942-UP; MHX1-UP
24-VOLT
PART OF 269-4977, 369-0809 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@269-2757@@@@@

369-0809 STARTING MOTOR GP-ELECTRIC

369-0809 STARTING MOTOR GP-ELECTRIC
S/N TXF1-UP
24-VOLT, 50-MT
PART OF 424-8405, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH LEFT HAND STARTER APPLICATIONS

SWITCH GP

7N-0719 SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N M2R1-UP
PART OF 255-8323 PANEL GP-CIRCUIT BREAKER

125-1302 SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N M2R1-UP
24-VOLT
PART OF 255-8323 PANEL GP-CIRCUIT BREAKER

212-2768 SWITCH GP-PRESSURE

212-2768 SWITCH GP-PRESSURE
S/N MHX1-258
FUEL FILTER, DIFFERENTIAL
PART OF 246-3265 FILTER GP-FUEL
FIELD REPLACEMENT ORDER @@@@@258-0883@@@@@

258-0883 SWITCH GP-PRESSURE

258-0883 SWITCH GP-PRESSURE
S/N MHX259-1281
PART OF 246-3265 FILTER GP-FUEL
FIELD REPLACEMENT FOR @@@@@212-2768@@@@@

275-1253 SWITCH GP-PRESSURE

275-1253 SWITCH GP-PRESSURE
S/N TXF114-UP; MHX1282-UP
5 TO 28-VOLT. AMPSEAL CONNECTOR
PART OF 246-3265 FILTER GP-FUEL, 356-1881 PUMP GP-FUEL PRM & PRIM FILTER

106-0107 SWITCH GP-ROTARY

106-0107 SWITCH GP-ROTARY
S/N M2R152-UP
PART OF 251-0542, 286-7116 PANEL GP-SWITCH

9G-7641 SWITCH GP-START

9G-7641 SWITCH GP-START -ENGINE, KEY
S/N M2R1-UP
PART OF 238-1648, 251-0542, 286-7116 PANEL GP-SWITCH

158-6634 SWITCH GP-TOGGLE

158-6634 SWITCH GP-TOGGLE
S/N M2R1-UP
PART OF 255-0861 WIRING GP-CAB RISER

238-2208 SWITCH GP-WIPER

238-2208 SWITCH GP-WIPER -LOWER
S/N M2R1-UP
PART OF 258-7942, 356-6719 CAB GP, 255-0634 OPERATOR AR

WIRING GP

255-0637 BATTERY & WIRING GP

255-0637 BATTERY & WIRING GP
S/N M2R1-151
PART OF 252-9286 CHASSIS AR

255-0637 BATTERY & WIRING GP

255-0637 BATTERY & WIRING GP
S/N M2R152-UP
PART OF 252-9286 CHASSIS AR
Type 1

255-0637 BATTERY & WIRING GP

255-0637 BATTERY & WIRING GP
S/N M2R152-UP
PART OF 252-9286 CHASSIS AR
Type 2

241-7601 CONNECTION GP-ELECTRICAL

241-7601 CONNECTION GP-ELECTRICAL -CYLINDER BLOCK GROUND
S/N TXF114-UP; MHX1-UP
PROVIDES ADDITIONAL 8-MM GROUND STUD BELOW ECM
PART OF 241-8344, 280-3645, 424-8400, 424-8402, 424-8403, 424-8404, 424-8405, 424-8407 ENGINE AR-COMPLETE

235-8200 PLUG GP-CONNECTOR

235-8200 PLUG GP-CONNECTOR -ENGINE HARNESS, PROTECTIVE COVER
S/N TXF1-UP
PART OF 424-8405, 424-8407 ENGINE AR-COMPLETE

253-6149 WIRING GP-CAB

253-6149 WIRING GP-CAB
S/N M2R187-253
PART OF 258-7942 CAB GP

253-6149 WIRING GP-CAB

253-6149 WIRING GP-CAB
S/N M2R254-UP
PART OF 258-7942, 356-6719 CAB GP

255-0861 WIRING GP-CAB RISER

255-0861 WIRING GP-CAB RISER -FIXED
S/N M2R1-UP
PART OF 354-4218 RISER GP-CAB
Type 1

255-0861 WIRING GP-CAB RISER

255-0861 WIRING GP-CAB RISER -FIXED
S/N M2R1-UP
PART OF 354-4218 RISER GP-CAB
Type 2

266-0079 WIRING GP-CAB RISER

266-0079 WIRING GP-CAB RISER
S/N M2R187-253
PART OF 253-6149 WIRING GP-CAB

334-8428 WIRING GP-CAMERA

334-8428 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

334-8686 WIRING GP-CAMERA

334-8686 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

266-0852 WIRING GP-COMMUNICATION

266-0852 WIRING GP-COMMUNICATION
S/N M2R1-UP
PART OF 266-0896 INSTALLATION AR-COMMUNICATION

338-5968 WIRING GP-COMMUNICATION

338-5968 WIRING GP-COMMUNICATION -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

256-0122 WIRING GP-CONSOLE

256-0122 WIRING GP-CONSOLE -LH
S/N M2R1-UP
PART OF 259-0032 WIRING GP-CONSOLE

256-0123 WIRING GP-CONSOLE

256-0123 WIRING GP-CONSOLE -RH
S/N M2R1-182
PART OF 259-0032 WIRING GP-CONSOLE

256-0123 WIRING GP-CONSOLE

256-0123 WIRING GP-CONSOLE -RH
S/N M2R183-UP
PART OF 259-0032 WIRING GP-CONSOLE

259-0032 WIRING GP-CONSOLE

259-0032 WIRING GP-CONSOLE
S/N M2R1-UP
PART OF 255-0634 OPERATOR AR

219-7462 WIRING GP-ELECTRONIC CONTROL

219-7462 WIRING GP-ELECTRONIC CONTROL
S/N MHX1-UP
PART OF 241-8344, 280-3645 ENGINE AR-COMPLETE

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF114-4789; MHX10192-12108
PART OF 280-3645, 424-8403, 424-8404 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF4790-8664
PART OF 280-3645, 424-8400, 424-8402, 424-8403, 424-8404, 424-8405, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

354-0045 WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF8665-UP
PART OF 280-3645, 424-8400, 424-8402, 424-8403, 424-8404, 424-8405, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

238-2273 WIRING GP-FAN

238-2273 WIRING GP-FAN -REVERSING
S/N M2R1-UP
PART OF 228-8240, 271-4015 CONTROL AR-FAN

227-7143 WIRING GP-FINE SWING

227-7143 WIRING GP-FINE SWING
S/N M2R1-UP
PART OF 252-9286 CHASSIS AR, 225-4519 VALVE AR-SWING

354-0030 WIRING GP-GRAPPLE CONTROL

354-0030 WIRING GP-GRAPPLE CONTROL
S/N M2R257-UP
PART OF 264-6102 WIRING GP-WORK TOOL

354-0031 WIRING GP-GRAPPLE CONTROL

354-0031 WIRING GP-GRAPPLE CONTROL
S/N M2R257-UP
PART OF 264-6102 WIRING GP-WORK TOOL

317-7368 WIRING GP-HYDRAULIC GENERATOR

317-7368 WIRING GP-HYDRAULIC GENERATOR
S/N M2R1-UP
PART OF 255-4403 GENERATOR AR-HYDRAULIC

354-0032 WIRING GP-MONITOR

354-0032 WIRING GP-MONITOR -HYDRAULIC GENERATOR
S/N M2R1-UP
PART OF 255-4404 MONITOR GP-OPERATOR

256-0124 WIRING GP-PLATFORM

256-0124 WIRING GP-PLATFORM
S/N M2R1-UP
PART OF 255-0634 OPERATOR AR
Type 1

256-0124 WIRING GP-PLATFORM

256-0124 WIRING GP-PLATFORM
S/N M2R1-UP
PART OF 255-0634 OPERATOR AR
Type 2

230-0961 WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP; MHX1-UP
PART OF 267-0009, 317-9990, 356-2433 ENGINE AR-CORE

257-4183 WIRING GP-UNIT INJECTOR

257-4183 WIRING GP-UNIT INJECTOR
S/N M2R1-UP
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR

253-9106 WIRING GP-WORK TOOL

253-9106 WIRING GP-WORK TOOL -ROTATOR
S/N M2R1-182
PART OF 252-9286 CHASSIS AR

264-6102 WIRING GP-WORK TOOL

264-6102 WIRING GP-WORK TOOL -ROTATOR
S/N M2R183-256
PART OF 252-9286 CHASSIS AR

264-6102 WIRING GP-WORK TOOL

264-6102 WIRING GP-WORK TOOL -ROTATOR
S/N M2R257-UP
PART OF 252-9286 CHASSIS AR

ELECTRONICS GP-MONITOR

366-8811 SERVICE GP-MONITOR

366-8811 SERVICE GP-MONITOR
S/N M2R327-UP
PART OF 221-8813 MONITOR & MTG GP-OPERATOR

ELECTRONICS GP-COMMUNICATION

266-0853 CONTROL & MTG GP-COMMUNICATION

266-0853 CONTROL & MTG GP-COMMUNICATION
S/N M2R1-UP
PART OF 266-0896 INSTALLATION AR-COMMUNICATION

302-8523 CONTROL & MTG GP-COMMUNICATION

302-8523 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK
S/N M2R1-UP
PART OF 266-0896 INSTALLATION AR-COMMUNICATION
Type 1

302-8523 CONTROL & MTG GP-COMMUNICATION

302-8523 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK
S/N M2R1-UP
PART OF 266-0896 INSTALLATION AR-COMMUNICATION
Type 2

262-1421 ELECTRONICS GP-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N M2R1-UP
PART OF 302-8523 CONTROL & MTG GP-COMMUNICATION

266-0896 INSTALLATION AR-COMMUNICATION

266-0896 INSTALLATION AR-COMMUNICATION
S/N M2R1-UP

266-0852 WIRING GP-COMMUNICATION

266-0852 WIRING GP-COMMUNICATION
S/N M2R1-UP
PART OF 266-0896 INSTALLATION AR-COMMUNICATION

338-5968 WIRING GP-COMMUNICATION

338-5968 WIRING GP-COMMUNICATION -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

BLOCK GP-JUNCTION

9W-0742 BLOCK GP-JUNCTION

9W-0742 BLOCK GP-JUNCTION -BATTERY
S/N M2R1-UP
PART OF 255-0637 BATTERY & WIRING GP

CAMERA GP

313-7833 CAMERA & MOUNTING GP

313-7833 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 307-7757 MOUNTING GP-CAMERA

329-5077 CAMERA AR

329-5077 CAMERA AR -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP

336-6684 CAMERA GP

336-6684 CAMERA GP -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
12-VOLT/24-VOLT, 115 DEGREE. COLOR
PART OF 313-7833 CAMERA & MOUNTING GP

307-7757 MOUNTING GP-CAMERA

307-7757 MOUNTING GP-CAMERA -COUNTERWEIGHT
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

334-8428 WIRING GP-CAMERA

334-8428 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

334-8686 WIRING GP-CAMERA

334-8686 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

RADIO GP

336-3545 RADIO GP-COMMUNICATION

336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N M2R1-UP
PART OF 266-0853 CONTROL & MTG GP-COMMUNICATION

HARNESS GP

354-0048 HARNESS AS-ENGINE

354-0048 HARNESS AS-ENGINE
S/N TXF114-4789; MHX10192-12108
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL

385-2664 HARNESS AS-ENGINE

385-2664 HARNESS AS-ENGINE
S/N TXF4790-8664
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL
FOR USE WITH INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH OCV SYSTEM
CANNOT BE USED WITH MACHINE APPLICATIONS INDUSTRIAL AND COMMERCIAL APPLICATIONS WITH NO OVC SYSTEM

305-5373 HARNESS AS-POWER

305-5373 HARNESS AS-POWER
S/N M2R1-UP
PART OF 289-3972 PANEL GP-CONTROL

356-1892 HARNESS AS-SENSOR

356-1892 HARNESS AS-SENSOR
S/N TXF114-UP; MHX10192-UP
JUMPER
PART OF 356-1881 PUMP GP-FUEL PRM & PRIM FILTER

516-4037 HARNESS AS-SENSOR

516-4037 HARNESS AS-SENSOR
S/N TXF8665-UP
PART OF 354-0045 WIRING GP-ELECTRONIC CONTROL

259-4887 HARNESS AS-WIRING

259-4887 HARNESS AS-WIRING -PRODUCT LINK
S/N M2R1-UP
PART OF 266-0852 WIRING GP-COMMUNICATION

259-4940 HARNESS AS-WIRING

259-4940 HARNESS AS-WIRING -SERVICE CONNECTOR
S/N M2R1-UP
PART OF 266-0852 WIRING GP-COMMUNICATION

357-3009 HARNESS AS-WIRING

357-3009 HARNESS AS-WIRING -CONVERTER
S/N M2R1-UP
PART OF 256-0124 WIRING GP-PLATFORM

418-7614 HARNESS AS-WIRING

418-7614 HARNESS AS-WIRING
S/N TXF1-UP; MHX1-UP
PART OF 230-0961 WIRING GP-UNIT INJECTOR

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

THERMOCOUPLE GP

Special Instruction

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

ALARM GP

Operation and Maintenance Manual

Travel Alarm - Test - If Equipped
345C Excavators

Service Magazine

New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
2012/03/15

ALTERNATOR GP-CHARGING

Engine News

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Belt - Inspect/Adjust/Replace
345C Excavators

Special Instruction

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Alternator Mounting
C11 and C13 Engines

Alternator and Regulator
C11 and C13 Engines

Information Release Memo

CAT REMAN ANNOUNCES THE INTRODUCTION OF ADDITIONAL REMANUFACTURED ALTERNATORS FOR VARIOUS ENGINES
CAT REMAN ANNOUNCES THE INTRODUCTION OF ADDITIONAL REMANUFACTURED ALTERNATORS FOR VARIOUS ENGINES

Testing and Adjusting

Charging System - Test
C11 and C13 Engines for Caterpillar Built Machines

Troubleshooting

Alternator - Noisy Operation
C11 and C13 Engines for Caterpillar Built Machines

MID 105 - CID 0168 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0168 - FMI 05
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 161 - CID 0168 - FMI 00
Product Link - PL522/523

MID 161 - CID 0168 - FMI 01
Product Link - PL522/523

MID 161 - CID 1251 - FMI 03
Product Link - PL522/523

MID 122 - CID 0168 - FMI 00
Product Link 121S/300

MID 122 - CID 0168 - FMI 01
Product Link 121S/300

MID 122 - CID 1251 - FMI 03
Product Link 121S/300

Disassembly and Assembly

Alternator - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Alternator - Remove and Install
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Service Magazine

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
345C Excavators

Battery - Clean
345C Excavators

Battery Hold-Down - Tighten
345C Excavators

Battery - Recycle
345C Excavators

Fuses - Replace
345C Excavators

Technical Information Bulletin

Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}

Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Testing and Adjusting

Battery - Test
C11 and C13 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C11 and C13 Engines for Caterpillar Built Machines

CID 0168 FMI 02 System Voltage intermittent/erratic
C11 and C13 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C11 and C13 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 105 - CID 0168 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0168 - FMI 05
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 161 - CID 0168 - FMI 00
Product Link - PL522/523

MID 161 - CID 0168 - FMI 01
Product Link - PL522/523

MID 161 - CID 1251 - FMI 03
Product Link - PL522/523

MID 122 - CID 0168 - FMI 00
Product Link 121S/300

MID 122 - CID 0168 - FMI 01
Product Link 121S/300

MID 122 - CID 1251 - FMI 03
Product Link 121S/300

Disassembly and Assembly

Battery - Remove and Install
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Service Magazine

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10

CONTROL GP-ELECTRONIC

Tool Operating Manual

Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

Service Magazine

New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat ® Products {7610, 7620}
2014/02/06

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

ELECTRONICS GP-ENGINE

Truck Engine News

Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01

Engine News

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04

The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Technical Information Bulletin

New Software Prevents a Logged Code for an Abnormal Throttle Position on Certain Excavators{7620}
New Software Prevents a Logged Code for an Abnormal Throttle Position on Certain Excavators{7620}

New Software Prevents a Logged Code for an Abnormal Update Rate on Certain Excavators{7620}
New Software Prevents a Logged Code for an Abnormal Update Rate on Certain Excavators{7620}

A False Diagnostic Code is Generated When Flashing Software in Some Excavators{1901, 1902, 7600, 7610, 7620}
A False Diagnostic Code is Generated When Flashing Software in Some Excavators{1901, 1902, 7600, 7610, 7620}

Troubleshooting

ECM Will Not Communicate with Other Systems or Display Modules
C11 and C13 Engines for Caterpillar Built Machines

Self-Diagnostics
C11 and C13 Engines for Caterpillar Built Machines

Flash Programming
C11 and C13 Engines for Caterpillar Built Machines

System Overview
C11 and C13 Engines for Caterpillar Built Machines

Electronic Service Tool Will Not Communicate with ECM
C11 and C13 Engines for Caterpillar Built Machines

Programming Parameters
C11 and C13 Engines for Caterpillar Built Machines

Event Codes
C11 and C13 Engines for Caterpillar Built Machines

CID 0268 FMI 02 Check Programmable Parameters
C11 and C13 Engines for Caterpillar Built Machines

CID 0248 FMI 12 Cat Data Link failed
C11 and C13 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C11 and C13 Engines for Caterpillar Built Machines

System Configuration Parameters
C11 and C13 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Diagnostic Codes
C11 and C13 Engines for Caterpillar Built Machines

Replacing the ECM
C11 and C13 Engines for Caterpillar Built Machines

ECM Will Not Accept Factory Passwords
C11 and C13 Engines for Caterpillar Built Machines

MID 105 - CID 0590 - FMI 09
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0590 - FMI 12
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Disassembly and Assembly

Engine Control Module - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Engine Electronic Control - Remove and Install
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Service Magazine

New Factory Password System for Caterpillar Engines {1000, 1900}
2005/03/07

Update on the Factory Password System {1901, 7620}
2008/02/11

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Machine Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
2013/10/25

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

ELECTRONICS GP-POWER TRAIN

Engine News

The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22

Special Instruction

Service Magazine

277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONTROL GP-FAN

New Software is Now Used on the 345C Material Handler {1931, 7600, 7610, 7620}
2011/07/28

CONTROL GP-GRADE

Operation and Maintenance Manual

General Information
AccuGrade^® GPS (CD700)

System Components
AccuGrade^® GPS (CD700)

Startup
AccuGrade^® GPS (CD700)

Preparing for Operation
AccuGrade^® GPS (CD700)

Configuration
AccuGrade^® GPS (CD700)

Avoidance Zone - Set
AccuGrade^® GPS (CD700)

Beeper - Set
AccuGrade^® GPS (CD700)

Brightness (Display and Light Bar) - Set
AccuGrade^® GPS (CD700)

Diagnostics - View
AccuGrade^® GPS (CD700)

GPS Accuracy Mode - Set
AccuGrade^® GPS (CD700)

Light Bar Scale - Set
AccuGrade^® GPS (CD700)

Settings - Restore
AccuGrade^® GPS (CD700)

Settings - Save
AccuGrade^® GPS (CD700)

Text Items - Set
AccuGrade^® GPS (CD700)

Increment Switch - Set
AccuGrade^® GPS (CD700)

Bucket Type - Set
AccuGrade^® GPS (CD700)

Map Recording - Set
AccuGrade^® GPS (CD700)

Vertical Guidance Method - Set
AccuGrade^® GPS (CD700)

Vertical Guidance
AccuGrade^® GPS (CD700)

Setting Up for Operation
AccuGrade^® GPS (CD700)

Horizontal Guidance
AccuGrade^® GPS (CD700)

Designs
AccuGrade^® GPS (CD700)

Level Surface Design
AccuGrade^® GPS (CD700)

Sloping Surface Design
AccuGrade^® GPS (CD700)

Light Bar
AccuGrade^® GPS (CD700)

Plan View
AccuGrade^® GPS (CD700)

Cross Section View
AccuGrade^® GPS (CD700)

Profile View
AccuGrade^® GPS (CD700)

Text View
AccuGrade^® GPS (CD700)

Display Navigation
AccuGrade^® GPS (CD700)

Design Surface Type
AccuGrade^® GPS (CD700)

Common Problems
AccuGrade^® GPS (CD700)

End User License Agreement
AccuGrade^® GPS (CD700)

Flashing Messages
AccuGrade^® GPS (CD700)

Full Screen Messages
AccuGrade^® GPS (CD700)

General Maintenance Information
AccuGrade^® GPS (CD700)

Glossary
AccuGrade^® GPS (CD700)

Machine Symbols
AccuGrade^® GPS (CD700)

Safety Messages
AccuGrade^® GPS (CD700)

Troubleshooting Techniques
AccuGrade^® GPS (CD700)

Wireless Communication
AccuGrade^® GPS (CD700)

Wireless Communication - Set
AccuGrade^® GPS (CD700)

System Components
AccuGrade^® GPS (CD700)

Wireless Communication
AccuGrade^® GPS (CD700)

Setting Up for Operation
AccuGrade^® GPS (CD700)

Display Navigation
AccuGrade^® GPS (CD700)

Plan View
AccuGrade^® GPS (CD700)

Profile View
AccuGrade^® GPS (CD700)

Text View
AccuGrade^® GPS (CD700)

Cross Section View
AccuGrade^® GPS (CD700)

Vertical Guidance
AccuGrade^® GPS (CD700)

Horizontal Guidance
AccuGrade^® GPS (CD700)

Designs
AccuGrade^® GPS (CD700)

Level Surface Design
AccuGrade^® GPS (CD700)

Sloping Surface Design
AccuGrade^® GPS (CD700)

Configuration
AccuGrade^® GPS (CD700)

General Information
AccuGrade^® GPS (CD700)

Horizontal Offset - Set
AccuGrade^® GPS (CD700)

Vertical Offset - Set
AccuGrade^® GPS (CD700)

Design - Set
AccuGrade^® GPS (CD700)

Diagnostics - View
AccuGrade^® GPS (CD700)

Brightness (Display and Light Bar) - Set
AccuGrade^® GPS (CD700)

Light Bar Scale - Set
AccuGrade^® GPS (CD700)

Settings - Restore
AccuGrade^® GPS (CD700)

Avoidance Zone - Set
AccuGrade^® GPS (CD700)

Beeper - Set
AccuGrade^® GPS (CD700)

Map Recording - Set
AccuGrade^® GPS (CD700)

Settings - Save
AccuGrade^® GPS (CD700)

Text Items - Set
AccuGrade^® GPS (CD700)

Increment Switch - Set
AccuGrade^® GPS (CD700)

Guidance to Dynamic Layered Lift Alignments
AccuGrade^® GPS (CD700)

Avoidance Zone - Set
AccuGrade^® GPS (CD700)

Bucket Type - Set
AccuGrade^® GPS (CD700)

Configuration
AccuGrade^® GPS (CD700)

Design - Set - 3D
AccuGrade^® GPS (CD700)

Design Surface Type - 3D
AccuGrade^® GPS (CD700)

Designs - 3D
AccuGrade^® GPS (CD700)

Diagnostics - View - GPS
AccuGrade^® GPS (CD700)

Depth and Slope Mode - 2D
AccuGrade^® GPS (CD700)

Depth Mode - 2D
AccuGrade^® GPS (CD700)

Display Navigation
AccuGrade^® GPS (CD700)

Full Screen Messages
AccuGrade^® GPS (CD700)

GPS Accuracy Mode - Set
AccuGrade^® GPS (CD700)

General Information
AccuGrade^® GPS (CD700)

Increment Switch - Set
AccuGrade^® GPS (CD700)

Laser Catcher - Set - 2D
AccuGrade^® GPS (CD700)

Horizontal Guidance
AccuGrade^® GPS (CD700)

Level Surface Design
AccuGrade^® GPS (CD700)

Machine Symbols
AccuGrade^® GPS (CD700)

Measure Mode - 2D
AccuGrade^® GPS (CD700)

Plan View - 3D
AccuGrade^® GPS (CD700)

Preparing for Operation - 3D Dual GPS
AccuGrade^® GPS (CD700)

Preparing for Operation - 3D Single GPS
AccuGrade^® GPS (CD700)

Preparing for Operation - ATS
AccuGrade^® GPS (CD700)

Profile Mode - 2D
AccuGrade^® GPS (CD700)

Profile View
AccuGrade^® GPS (CD700)

Safety Messages
AccuGrade^® GPS (CD700)

Vertical Guidance Method - Set - 3D
AccuGrade^® GPS (CD700)

Wireless Communication
AccuGrade^® GPS (CD700)

Vertical Guidance - 3D
AccuGrade^® GPS (CD700)

Vertical Guidance - 2D
AccuGrade^® GPS (CD700)

Text Items - Set
AccuGrade^® GPS (CD700)

System Components
AccuGrade^® GPS (CD700)

Split Screen View
AccuGrade^® GPS (CD700)

Settings - Save
AccuGrade^® GPS (CD700)

Setting Up for Operation - ATS
AccuGrade^® GPS (CD700)

Setting Up for Operation - 3D
AccuGrade^® GPS (CD700)

Setting Up for Operation - 2D
AccuGrade^® GPS (CD700)

Glossary
AccuGrade^® GPS (CD700)

Guidance to Dynamic Layered Lift Alignments
AccuGrade^® GPS (CD700)

Brightness (Display and Light Bar) - Set
AccuGrade^® GPS (CD700)

Horizontal Offset - Set
AccuGrade^® GPS (CD700)

Light Bar Scale - Set
AccuGrade^® GPS (CD700)

Map Recording - Set
AccuGrade^® GPS (CD700)

Settings - Restore
AccuGrade^® GPS (CD700)

Common Problems
AccuGrade^® GPS (CD700)

Flashing Messages
AccuGrade^® GPS (CD700)

Troubleshooting Techniques
AccuGrade^® GPS (CD700)

End User License Agreement
AccuGrade^® GPS (CD700)

Technical Information Bulletin

AccuGrade® CD700 Devices not Responding{7220, 7490}
AccuGrade^® CD700 Devices not Responding{7220, 7490}

Systems Operation

General Information
AccuGrade^® GPS (CD700)

System Components
AccuGrade^® GPS (CD700)

Modes of Operation
AccuGrade^® GPS (CD700)

Guidance Terms
AccuGrade^® GPS (CD700)

Data Card
AccuGrade^® GPS (CD700)

Flashing Messages
AccuGrade^® GPS (CD700)

Radio Utility
AccuGrade^® GPS (CD700)

Receiver Firmware Upgrade
AccuGrade^® GPS (CD700)

Display Firmware Upgrade
AccuGrade^® GPS (CD700)

Sensor Firmware Upgrade
AccuGrade^® GPS (CD700)

Setup Menu
AccuGrade^® GPS (CD700)

Avoidance Zone
AccuGrade^® GPS (CD700)

Beeper
AccuGrade^® GPS (CD700)

Brightness (Display and Light Bar)
AccuGrade^® GPS (CD700)

Receiver Configuration
AccuGrade^® GPS (CD700)

Wireless Communication
AccuGrade^® GPS (CD700)

Software Support Option
AccuGrade^® GPS (CD700)

Root Folder
AccuGrade^® GPS (CD700)

Operator Access
AccuGrade^® GPS (CD700)

On-Grade Tolerance
AccuGrade^® GPS (CD700)

Machine Type
AccuGrade^® GPS (CD700)

Machine Dimensions
AccuGrade^® GPS (CD700)

GPS Accuracy Mode
AccuGrade^® GPS (CD700)

Display Units
AccuGrade^® GPS (CD700)

Design Folder
AccuGrade^® GPS (CD700)

Customer Supplied Radio
AccuGrade^® GPS (CD700)

Text Items
AccuGrade^® GPS (CD700)

Map Recording
AccuGrade^® GPS (CD700)

Light Bar Scale
AccuGrade^® GPS (CD700)

Display Registration and Activation
AccuGrade^® GPS (CD700)

Display Language
AccuGrade^® GPS (CD700)

Display Settings
AccuGrade^® GPS (CD700)

Testing and Adjusting

Light Bar - Configure
AccuGrade^® GPS (CD700)

Machine Dimensions - Configure
AccuGrade^® GPS (CD700)

Machine Type - Configure
AccuGrade^® GPS (CD700)

Angle Sensor - Calibrate - AS300 System
AccuGrade^® GPS (CD700)

Module - Replace - AccuGrade Display
AccuGrade^® GPS (CD700)

Angle Sensor - Calibrate - PSC System
AccuGrade^® GPS (CD700)

Troubleshooting

Operational Problems
AccuGrade^® GPS (CD700)

Receiver
AccuGrade^® GPS (CD700)

Base Station
AccuGrade^® GPS (CD700)

Machine Radio
AccuGrade^® GPS (CD700)

Machine Position - Display Messages
AccuGrade^® GPS (CD700)

Light Bar
AccuGrade^® GPS (CD700)

Status Indicators
AccuGrade^® GPS (CD700)

Beeper
AccuGrade^® GPS (CD700)

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

Service Magazine

New AccuGrade ® is Now Available {7220, 7620}
2007/08/27

New MS990 GNSS Receiver Firmware is Now Available {7010, 7620}
2007/08/20

New AccuGrade ® Software is Now Available {7220, 7620}
2007/08/27

Matched Receiver Firmware for AccuGrade Dual GPS Systems {7010, 7620}
2007/10/01

New AccuGrade ® Software is Now Available {7220, 7620}
2008/02/11

New AccuGrade® Firmware is Now Available {7220, 7620}
2008/05/05

Software Files for AccuGrade® Are Now Available on SISWeb {7220, 7620}
2008/10/13

New AccuGrade® Software is Now Available {7220, 7620}
2009/02/23

New AccuGrade Version 11.10 Software is Now Available {7220, 7620}
2009/07/27

New AccuGrade Software Version 11.10-B is Now Available {7220}
2009/09/30

New AccuGrade® Software is Now Available {7220, 7620}
2010/03/22

New AccuGrade Software Version 11.21 for the CD700 Display Is Now Available on SISweb {7220, 7620}
2010/07/08

ELECTRONICS GP-IMPLEMENT

Special Instruction

Troubleshooting

Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-MACHINE

Engine News

The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Machine Security System - If Equipped
345C Excavators

Special Instruction

Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEELED EXCAVATORS, EXCAVATORS, AND MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEELED EXCAVATORS, EXCAVATORS, AND MATERIAL HANDLERS

PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEELED EXCAVATORS, EXCAVATORS, MATERIAL HANDLERS, AND TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEELED EXCAVATORS, EXCAVATORS, MATERIAL HANDLERS, AND TELEHANDLERS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Technical Information Bulletin

New Software Prevents a Logged Code for an Abnormal Throttle Position on Certain Excavators{7620}
New Software Prevents a Logged Code for an Abnormal Throttle Position on Certain Excavators{7620}

New Software Prevents a Logged Code for an Abnormal Update Rate on Certain Excavators{7620}
New Software Prevents a Logged Code for an Abnormal Update Rate on Certain Excavators{7620}

Tool Operating Manual

Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Systems Operation

General Information
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

System Operation
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Diagnostic Operation
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electronic Control Module (Machine)
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Related Components
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Calibration
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electronic Control Module (ECM) - Configure
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Glossary of Electrical Terms
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electronic Control Module (ECM) - Replace
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Troubleshooting

MID 105 - CID 0145 - FMI 06
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Diagnostic Code List
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0254 - FMI 09
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0254 - FMI 12
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

General Information
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Service Magazine

New Software Prevents a False Warning for the Hydraulic Oil Temperature and a False Message During the Calibration of the Fan Speed {1408, 7610, 7620}
2007/09/03

A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
2008/05/19

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10

Updated Machine Software is Available for the Electronics Group {7610, 7620}
2009/03/30

New Software is Now Used on the 345C Material Handler {1931, 7600, 7610, 7620}
2011/07/28

New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONTROL GP-UNPROGRAMMED

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Systems Operation

Electronic Control Module (Machine)
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electronic Control Module (ECM) - Configure
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electronic Control Module (ECM) - Replace
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Service Magazine

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}

Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

GENERATOR GP

Systems Operation

Hydraulic Operation
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

General Information
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Generator Set Control
345C Material Handler Hydraulic System

General Information
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Hydraulic Operation
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Testing and Adjusting

Controller - Set
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Magnet - Check
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Generator Set - Test and Adjust
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

System Schematic
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Programmable Logic Controller - Replace
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Generator Set - Test and Adjust - 15 kW Version
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

System Schematic
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Generator Set - Test and Adjust
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Controller - Set
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet - Check
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Electronic Control Module (ECM) - Replace
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Troubleshooting

Magnet Does Not Lift Material
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Magnet Does Not Drop Material
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Material Is Not Dropped Correctly
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

General Information
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Does Not Lift Material
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Does Not Drop Material
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5004 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5004 - FMI 5
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5004 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5005 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5005 - FMI 5
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5005 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5006 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5006 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5008 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5009 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5010 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5011 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5012 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5012 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Material Does Not Drop Cleanly
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Material Is Dropped Sporadically
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5000 - FMI 11
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5001 - FMI 11
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5007 - FMI 0
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5013 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5013 - FMI 5
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5013 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5014 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5014 - FMI 5
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Magnet Control, SPN 5014 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Disassembly and Assembly

Generator - Remove
345C Material Handler Machine Systems

Generator - Install
345C Material Handler Machine Systems

HORN GP-ELECTRIC

Service Magazine

New Horn Is Now Used On Certain Cat Products {7402}
2012/02/17

INSTALLATION GP

Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13

LIGHTING GP

Operation and Maintenance Manual

High Intensity Discharge Lamp (HID) - Replace - If Equipped
345C Excavators

Service Magazine

A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29

An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
2015/09/11

MOTOR GP

An Improved Starting Motor is Now Available {1453}
2009/10/15

A New Starter Solenoid is Now Available {1467}
2008/03/17

PANEL GP-CIRCUIT BREAKER

Operation and Maintenance Manual

Circuit Breakers - Reset
345C Excavators

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

PANEL GP-FUSE

RECEPTACLE GP-AUXILIARY START

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

SENSOR GP

Special Instruction

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}

Specifications

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Liquid Level Sensor (Water Separator)
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Tool Operating Manual

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Testing and Adjusting

Angle Sensor - Calibrate - AS300 System
AccuGrade^® GPS (CD700)

Angle Sensor - Calibrate - PSC System
AccuGrade^® GPS (CD700)

Troubleshooting

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0261 FMI 13 Engine Timing Calibration required
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor - Calibrate
C11 and C13 Engines for Caterpillar Built Machines

MID 105 - CID 0190 - FMI 05
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0190 - FMI 10
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

MID 105 - CID 1178 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 1178 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0600 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 2265 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 2265 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 2266 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 2266 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Sensor Signal (Analog, Active) - Test
C11 and C13 Engines for Caterpillar Built Machines

Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Fuel Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Boost Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Camshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Crankshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

Troubleshooting the "Water Separator Has Water" Warning Message {1263, 1439}
2011/12/22

Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070}
2007/04/02

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

A New Angle Sensor is Now Available for AccuGrade and CAES Systems on Excavators {1439, 5953}
2009/03/16

Improved Fuel Level Sender As Is Now Used on Certain Cat® Products {1273, 7481}
2012/10/08

SOLENOID GP

Specifications

Solenoid Valve (Grapple)
345C Excavator and 345C Material Handler Machine System Specifications

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

STARTING AID GP

Operation and Maintenance Manual

Ether Starting Aid Cylinder - Replace - If Equipped
345C Excavators

Engine Starting
345C Excavators

Troubleshooting

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Ether Injection System - Test
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Ether Start Valve - Remove and Install
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Service Magazine

A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19

STARTING MOTOR GP

Engine News

Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
C11 and C13 Engines

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Pinion Clearance - Adjust
C11 and C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Electric Starting Motor - Remove and Install
345C Excavator and 345C Mobile Hydraulic Power Unit Engine Supplement

Service Magazine

The Starter Solenoid is Improved on Certain Machines {1453}
2013/04/04

SWITCH GP

Operation and Maintenance Manual

Battery Disconnect Switch
345C Excavators

Special Instruction

Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Technical Information Bulletin

New Software Prevents a Logged Code for an Abnormal Throttle Position on Certain Excavators{7620}
New Software Prevents a Logged Code for an Abnormal Throttle Position on Certain Excavators{7620}

Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}

Specifications

Engine Oil Level Switch - If Equipped
C11 and C13 Engines

Systems Operation

Switches
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Troubleshooting

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

A New Backup Switch for the Engine Speed Control Is Available {1408, 1435}
2006/11/27

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10

Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/08/03

New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/07/18

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TOOLS

Truck Engine News

Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13

Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04

Special Instruction

An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}

Tool Operating Manual

348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}

Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

Electronic Service Tool Will Not Communicate with ECM
C11 and C13 Engines for Caterpillar Built Machines

Service Tools
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Electronic Service Tools
C11 and C13 Engines for Caterpillar Built Machines

Factory Passwords
C11 and C13 Engines for Caterpillar Built Machines

Service Tools
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Service Tools
AccuGrade^® GPS (CD700)

Service Tools
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Service Tools
Product Link - PL522/523

Service Tools
Product Link 121S/300

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27

New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/01

277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20

New Software For Cat® ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
2014/10/07

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

VALVE GP

Specifications

Solenoid Valve (Grapple)
345C Excavator and 345C Material Handler Machine System Specifications

Systems Operation

Solenoid Valve (Proportional Reducing) - Power Shift System
345C Material Handler Hydraulic System

WARNING GP

Testing and Adjusting

Overload Warning - Set - If Equipped
345C Material Handler Hydraulic System

Service Magazine

New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
2012/03/15

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
345C Excavators

Battery - Recycle
345C Excavators

Battery Disconnect Switch
345C Excavators

Power Receptacle - If Equipped
345C Excavators

Fuses - Replace
345C Excavators

Camera Harness - Disconnect and Connect
345C Excavators

SmartBoom Control - If Equipped
345C Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Systems Operation

Monitoring System
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Switches
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Sensors
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Monitoring System
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
345C Material Handler Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

System Schematic
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

Indicator for Volts Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Positive Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Generator Hot
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Over 75% Duty Cycle
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Negative Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

MID 105 - CID 0586 - FMI 05
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0586 - FMI 12
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 1178 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 1178 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0588 - FMI 09
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0600 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Component and Connector Locations
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

Indicator for Volts Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Over 75% Duty Cycle
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Generator Hot
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Positive Ground Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Negative Ground Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

MID 105 - CID 0096 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Connector Locations
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

New Software Prevents a False Warning for the Hydraulic Oil Temperature and a False Message During the Calibration of the Fan Speed {1408, 7610, 7620}
2007/09/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2011/04/04

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22

A Troubleshooting Procedure is Available for the Operation Check Relay on Certain Excavators {1408, 7301}
2010/07/28

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

A New Engine Harness Assembly Is Now Used on Certain Machines Equipped with C11 and C13 Engines {1408}
2013/04/09

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

CONNECTION GP

Tool Operating Manual

Service Magazine

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

ELECTRONICS GP-MONITOR

Operation and Maintenance Manual

Monitoring System
345C Excavators

Systems Operation

Setting Mode
D Series Excavator Monitoring System

Maintenance Information Mode
D Series Excavator Monitoring System

Service Mode
D Series Excavator Monitoring System

Password Change Mode
D Series Excavator Monitoring System

Password Entry
D Series Excavator Monitoring System

Device Test Mode
D Series Excavator Monitoring System

Override Mode
D Series Excavator Monitoring System

Tool Program Mode
D Series Excavator Monitoring System

Output Components
D Series Excavator Monitoring System

Troubleshooting

CID 0286 FMI 05 EMS Oil Lamp open/short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0286 FMI 06 EMS Oil Lamp short to +batt
C11 and C13 Engines for Caterpillar Built Machines

Truck sale:

92,000

Caterpillar 345CMH, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC

Call

2009 CAT 345C MH

Process Inc.
Bellevue, Washington

CATERPILLAR 345 C MH 2005
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States

CATERPILLAR 345CMH 2006
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States

CATERPILLAR 345CMH 2007
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States