AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

255-8323 PANEL GP-CIRCUIT BREAKER S/N M2R1-UP PART OF 259-0035 PANEL & MTG GP-CIRCUIT BREAKER 345C MH


ELECTRICAL AND STARTING SYSTEM
PANEL GP-CIRCUIT BREAKER
OPERATOR STATION
PANEL GP
CONSOLE GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
WIRING GP
RADIO GP
SENSOR GP

EXCAVATOR 345C MH EXCAVATOR M2R
 345C Fixed Cab Riser Material Handler M2R00001-UP (MACHINE) POWERED BY C13 Engine SEBP4208 345C MH M2R   (2005)

ELECTRICAL AND STARTING SYSTEM

PANEL GP-CIRCUIT BREAKER
PANEL & MTG GP-CIRCUIT BREAKER
259-0035 PANEL & MTG GP-CIRCUIT BREAKER
PANEL GP-CIRCUIT BREAKER
255-8323 PANEL GP-CIRCUIT BREAKER
 

#SEBP42080280
 

255-8323: PANEL GP-CIRCUIT BREAKER

255-8323 PANEL GP-CIRCUIT BREAKER
S/N M2R1-UP
PART OF 259-0035 PANEL & MTG GP-CIRCUIT BREAKER
i02198017 SEBP4208
2558323 PANEL GP-CIRCUIT BREAKER Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-8320 [1] PLATE-INSTRUCTION (BATTERY)  
2. 7N-0719 Y [1] SWITCH GP-DISCONNECT (BATTERY)  
3. 121-1023 [1] BLOCK-TERMINAL  
4. 171-2212 [1] CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
5. 234-1034 [1] CABLE AS  
6. 234-1036 [1] CABLE AS  
    (EACH CABLE AS INCLUDES)
  6V-2369 D CABLE (4-GA, BLACK)(0.2-M)  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 BE TUBE-HEAT SHRINK (17.78-MM DIA)  
7. 234-1037 [1] WIRE AS  
8. 234-1038 [1] WIRE AS  
9. 238-1506 [1] COVER  
10. 238-2280 [1] WIRE AS  
11. 238-2392 [1] BAR-BUS  
12. 255-8324 [1] BRACKET AS  
13. 256-0806 [1] WIRE AS  
14. 068-4209 [2] SCREW (8-32X0.75-IN)  
15. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
16. 125-1302 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
17. 171-2210 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
18. 5C-9553 M [5] BOLT (M6X1X16-MM)  
19. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
20. 6N-9349 [1] CIRCUIT BREAKER AS (30-AMPERE)(HYDRAULIC GENERATOR)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
21. 6V-5645 [4] SCREW-MACHINE (10-32X0.87-IN)  
22. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
23. 8T-4171 M [4] BOLT (M6X1X12-MM)  
24. 8T-4970 M [4] BOLT (M6X1X14-MM)  
25. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42080281
 

289-3972: PANEL GP-CONTROL

289-3972 PANEL GP-CONTROL
S/N M2R1-UP
PART OF 318-9582, 318-9583, 318-9584 CONTROL GP-HYDRAULIC GENERATOR, 308-0152 GENERATOR GP-HYDRAULIC
Type 1
i03100510 SEBP4208
2893972 PANEL GP-CONTROL Parts scheme 2893972 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5E-8011 [1] WASHER-SPECIAL (3.8-MM THK)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 7K-1181 [6] STRAP-CABLE  
4. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
5. 8T-9655 [8] MOUNT-ISOLATION  
6. 9M-4494 [2] NUT-SPANNER (3/4-14 NPT-THD)  
7. 113-8492 [1] FUSE (20-AMPERE)  
8. 123-6574 [2] BUSHING  
9. 124-3548 [2] FUSE (30-AMPERE)  
10. 160-3580 [1] HANDLE  
11. 160-3581 [1] SHAFT AS  
  4H-1641 [1] PIN-SPRING  
12. 167-3593 [1] STRAP  
13. 173-5450 [1] SPRING  
14. 178-3339 [18] SCREW (8-32X0.5-IN)  
15. 178-7240 BJ [1] FILM-INSTRUCTION (HYDRAULIC MANIFOLD)  
16. 180-7047 [1] HARNESS AS-POWER (DC)  
  8N-1542 [2] PIN-CONNECTOR (10-GA)  
  8N-1543 [2] SOCKET-CONNECTOR (10-GA)  
  127-5485 [2] PLUG AS-CONNECTOR (1-PIN)  
  127-5486 [2] RECEPTACLE AS-CONNECTOR (1-PIN)  
22. 189-2512 [1] PLATE  
23. 191-5222 [1] CONNECTOR  
24. 283-4308 [2] END-STOP  
25. 288-3741 [1] WIRE AS (10-GA, BLACK)  
26. 288-3743 [1] WIRE AS (10-GA, RED)  
27. 288-3745 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(16-CM)  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
28. 288-3749 [1] HARNESS AS-PANEL  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7K-1181 [36] STRAP-CABLE  
  7N-8816 [6] TERMINAL-FORK (16-GA TO 22-GA, NO. 4 SCREW)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  186-3735 [33] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [106] PLUG-SEAL  
  9W-0844 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  9X-3402 [37] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(59-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)  
  126-1766 [15] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  2L-8075 [8] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8076 [8] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8077 [2] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  2L-8079 [4] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-5618 [2] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  5P-2321 [8] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  133-0970 [2] RECEPTACLE AS-CONNECTOR (TEE)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [5] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  172-6063 [1] RECEPTACLE AS  
  307-8428 [1] GASKET  
  196-2413 [6] TERMINAL AS (12-GA)  
  174-3016 [1] PLUG AS-CONNECTOR (3-PIN)  
29. 288-3753 [1] BRACKET AS  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
30. 288-5507 [1] PLATE AS  
31. 289-3974 [1] PANEL AS-CONTROL  
  7X-0750 M [2] BOSS-WELD (M10X1.5X55-MM)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
32. 290-3399 [2] FILM-DANGER (SHOCK, ELECTROCUTION HAZARD)  
33. 291-8372 [1] MONITOR  
34. 302-8713 [1] FILM-INSTRUCTION (GENERATOR ENCLOSURE, READ OMM)  
35. 304-5304 [1] TRANSDUCER (CURRENT)(0 TO 25-AMPERE)  
36. 304-5312 [1] TRANSDUCER (CURRENT)(0 TO 300-AMPERE)  
37. 304-5687 [1] CONTROL GP-UNPROGRAMMED  
38. 308-2168 [1] BOARD AS-CIRCUIT  
  142-6258 [1] RECEPTACLE AS  
  6B-4540 [2] NUT (4-40-THD)  
  8C-5444 [1] DIODE-RECTIFIER  
  103-0703 [3] DIODE-ZENER  
40. 323-1152 [2] RELAY (100-VOLT, 40-AMPERE)(DROP)  
40A. 323-1152 [2] RELAY (100-VOLT, 40-AMPERE)(LIFT)  
52. 336-7723 [1] BOX AS  
  8T-3636 M [1] STUD-WELD (M8X1.25X32-MM)  
53. 032-4000 [4] SCREW (6-32X0.5-IN)  
54. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
55. 095-0741 M [2] SCREW-MACHINE (M6X1-THD)  
56. 132-3665 [6] SPACER  
57. 132-5789 [2] CLIP (LADDER)  
58. 160-3579 [1] SWITCH (DISCONNECT)  
59. 160-3596 [1] RESISTOR  
60. 160-3603 [1] RELAY (BOOST)  
61. 160-3604 [1] RELAY (VOLTAGE, GENERATOR)  
62. 160-3606 [1] CONNECTOR AS  
63. 173-5433 [1] BASE  
64. 173-5462 [1] RESISTOR  
65. 178-3341 [4] SCREW (8-32X2-IN)  
66. 180-7093 [1] CONNECTOR  
67. 222-6983 [2] HEAT SINK  
68. 263-6556 M [1] STUD (M10X1.5-THD)  
69. 263-6557 M [1] STUD (M10X1.5-THD)  
70. 3D-9799 [6] SCREW-MACHINE (8-32X0.875-IN)  
71. 3K-6881 [2] SCREW-MACHINE (1/4-20X0.625-IN)  
72. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
73. 5C-7261 M [1] NUT (M8X1.25-THD)  
74. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
75. 6V-5210 M [2] SCREW-MACHINE (M4X0.7X10-MM)  
76. 6V-8225 M [4] NUT (M6X1-THD)  
78. 8C-8514 [8] SCREW-MACHINE (8-32X0.375-IN)  
79. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
80. 8T-4133 M [2] NUT (M10X1.5-THD)  
81. 8T-4171 M [4] BOLT (M6X1X12-MM)  
82. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
83. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
84. 8T-6912 M [4] BOLT (M8X1.25X50-MM)  
85. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
86. 9S-2011 [2] SCREW-MACHINE (1/4-20X0.5-IN)  
87. 9X-6165 [8] WASHER (6.5X22X2.5-MM THK)  
88. 9X-8917 [4] SCREW-MACHINE (4-40X9.52-MM)  
89. 5P-8937 B COMPOUND-JOINT (THERMAL)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   FOR NACD USE ONLY
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP42080282
 

289-3972: PANEL GP-CONTROL

289-3972 PANEL GP-CONTROL
S/N M2R1-UP
PART OF 318-9582, 318-9583, 318-9584 CONTROL GP-HYDRAULIC GENERATOR, 308-0152 GENERATOR GP-HYDRAULIC
Type 2
i03873749 SEBP4208
2893972 PANEL GP-CONTROL Parts scheme 2893972 PANEL GP-CONTROL Parts scheme 2893972 PANEL GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [6] STRAP-CABLE  
2. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
3. 8T-9655 [8] MOUNT-ISOLATION  
4. 9M-4494 [1] NUT-SPANNER (3/4-14 NPT-THD)  
5. 113-8492 [1] FUSE (20-AMPERE)  
6. 123-6574 [1] BUSHING  
7. 124-3548 [2] FUSE (30-AMPERE)  
8. 160-3579 [1] SWITCH (DISCONNECT)  
9. 160-3603 [1] RELAY (BOOST)  
10. 160-3604 [1] RELAY (GENERATOR)  
11. 160-3606 [1] CONNECTOR AS  
12. 167-3593 [1] STRAP  
13. 173-5450 [1] SPRING  
14. 178-7240 BJ [1] FILM-INSTRUCTION (HYDRAULIC MANIFOLD)  
15. 9X-8917 [4] SCREW-MACHINE (4-40X9.52-MM)  
16. 9X-6165 [8] WASHER (6.5X22X2.5-MM THK)  
17. 9S-2011 [2] SCREW-MACHINE (1/4-20X0.5-IN)  
18. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
19. 8T-6912 M [4] BOLT (M8X1.25X50-MM)  
20. 180-7093 [1] CONNECTOR  
21. 189-2512 [1] PLATE  
22. 263-6556 M [1] STUD (M10X1.5-THD)  
23. 263-6557 M [1] STUD (M10X1.5-THD)  
24. 283-4308 [2] END-STOP  
25. 288-3741 [1] WIRE AS (10-GA, BLACK)  
26. 288-3743 [1] WIRE AS (10-GA, RED)  
27. 288-3745 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(16-CM)  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
28. 288-3749 [1] HARNESS AS-PANEL  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  8T-8729 [33] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
    (EACH PLUG AS-CONNECTOR INCLUDES)
  159-9322 [1] SEAL-O-RING  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  174-0503 [6] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
  8T-8737 [109] PLUG-SEAL  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  133-0970 [2] RECEPTACLE AS-CONNECTOR (TEE)  
  172-6063 [1] RECEPTACLE AS  
  307-8428 [1] GASKET  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [37] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [15] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [15] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  196-2413 [6] TERMINAL AS (12-GA)  
    (EACH INCLUDES)
  128-4123 [1] SEAL-CABLE  
  7K-1181 [36] STRAP-CABLE  
  5P-4571 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
  5P-2321 [8] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  2L-8075 [8] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8076 [8] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8077 [2] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  2L-8079 [4] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  7N-8816 [6] TERMINAL-FORK (16-GA TO 22-GA, NO. 4 SCREW)  
  119-3662 TUBE-HEAT SHRINK (10.85-MM DIA)(59-CM)  
  125-7874 TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)  
29. 288-3753 [1] BRACKET AS  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
30. 288-5507 [1] PLATE AS  
31. 289-3974 [1] PANEL AS-CONTROL  
32. 290-3399 [2] FILM-DANGER (SHOCK, ELECTROCUTION HAZARD)  
33. 291-8372 [1] MONITOR  
34. 304-5304 [1] TRANSDUCER (CURRENT)(0 TO 25-AMPERE)  
35. 304-5312 [1] TRANSDUCER (CURRENT)(0 TO 300-AMPERE)  
36. 304-5687 [1] CONTROL GP-UNPROGRAMMED  
37. 305-5373 Y [1] HARNESS AS-POWER  
38. 097-5921 [1] RAIL-MOUNTING  
39. 323-1152 [2] RELAY (100-VOLT, 40-AMPERE)(DROP)  
39A. 323-1152 [2] RELAY (100-VOLT, 40-AMPERE)(LIFT)  
40. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
42. 8T-4171 M [4] BOLT (M6X1X12-MM)  
43. 8T-4133 M [2] NUT (M10X1.5-THD)  
44. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
45. 8C-8514 [8] SCREW-MACHINE (8-32X0.375-IN)  
46. [4] SPACER  
47. 6V-8225 M [4] NUT (M6X1-THD)  
48. 6V-5210 M [2] SCREW-MACHINE (M4X0.7X10-MM)  
49. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
50. 336-7723 [1] BOX AS  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3636 M [1] STUD-WELD (M8X1.25X32-MM)  
51. 350-0605 [1] BOARD AS-CIRCUIT  
  142-6258 [1] RECEPTACLE AS  
  6B-4540 [2] NUT (4-40-THD)  
  8C-5444 [1] DIODE-RECTIFIER  
  103-0703 [1] DIODE-ZENER  
52. 395-9674 [1] RESISTOR (2-OHM)  
53. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
54. 436-6181 [1] RESISTOR (1.5-OHM)  
55. 458-4348 [1] HANDLE  
56. 458-4349 [1] SHAFT AS  
57. 458-4544 [1] BASE  
58. 510-2982 [2] HEAT EXCHANGER  
59. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
60. 095-0741 M [2] SCREW-MACHINE (M6X1-THD)  
61. 132-3665 [6] SPACER  
62. 132-5789 [2] CLIP (LADDER)  
63. 178-3339 [18] SCREW (8-32X0.5-IN)  
64. 178-3341 [4] SCREW (8-32X2-IN)  
65. 179-6401 [4] SCREW-PAN HEAD (6-32X0.5-IN)  
66. 3D-9799 [6] SCREW-MACHINE (8-32X0.875-IN)  
67. 3K-6881 [2] SCREW-MACHINE (1/4-20X0.625-IN)  
68. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
69. 5C-7261 M [1] NUT (M8X1.25-THD)  
70. 5P-8937 B COMPOUND-JOINT (THERMAL)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   FOR NACD USE ONLY
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42080283
 

238-1648: PANEL GP-SWITCH

238-1648 PANEL GP-SWITCH
S/N M2R1-UP
PART OF 255-0634 OPERATOR AR
i02159139 SEBP4208
2381648 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
3. 106-0107 [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7Y-5458 M [1] NUT (M12X1-THD)  
  7Y-5464 [1] WASHER (12.2X15.4X0.5-MM THK)  
  8T-8737 [1] PLUG-SEAL  
  106-0210 [1] SEAL  
4. 170-6828 [1] HARNESS AS-SWITCH (ENGINE START)  
5. 170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
6. 185-9208 [1] KNOB AS (THROTTLE POSITION)  
7. 234-1156 [1] COVER  
8. 234-1158 [1] COVER  
9. 234-1159 [1] PANEL  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42080284
 

251-0542: PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N M2R181-186
PART OF 255-0634 OPERATOR AR
i02236586 SEBP4208
2510542 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
3. 106-0107 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
5. 185-9208 [1] KNOB AS (ENGINE SPEED)  
6. 234-1156 [1] COVER  
7. 234-1158 [1] COVER  
8. 267-7976 [1] PANEL  
9. 251-0543 [1] HARNESS AS-CONSOLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [3] STRAP-CABLE  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42080285
 

286-7116: PANEL GP-SWITCH

286-7116 PANEL GP-SWITCH -ENGINE SPEED, START
S/N M2R175-UP
PART OF 255-0634 OPERATOR AR
i02497109 SEBP4208
2867116 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
3. 106-0107 Y [1] SWITCH GP-ROTARY (ENGINE SPEED)  
4. 170-6828 [1] HARNESS AS-SWITCH (ENGINE START)  
5. 170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
6. 185-9208 [1] KNOB AS  
7. 234-1156 [1] COVER  
8. 234-1158 [1] COVER  
9. 267-7976 [1] PANEL  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42080286
 

3T-9525: PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
S/N TXF114-UP; MHX1-UP
PART OF 269-2757, 348-7651 STARTING MOTOR GP-ELECTRIC
i04083269 SEBP4208
3T9525 PLATE AS-BRUSH Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-0372 [1] PLATE  
2. 6T-0371 [1] INSULATOR  
3. 9F-5599 [12] LOCKWASHER  
4. 6T-0363 [6] HOLDER AS-BRUSH  
    (EACH INCLUDES)
  3T-9494 [1] SPRING  
5. 3T-4709 [3] PLATE  
6. 3T-4710 [3] PLATE  
7. 2L-6679 [3] PLATE-INSULATOR  
8. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
9. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
 

#SEBP42080287
 

235-8200: PLUG GP-CONNECTOR

235-8200 PLUG GP-CONNECTOR -ENGINE HARNESS, PROTECTIVE COVER
S/N TXF1-UP
PART OF 424-8405, 424-8407 ENGINE AR-COMPLETE
i01997887 SEBP4208
2358200 PLUG GP-CONNECTOR Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-9353 [1] PLUG AS  
1A. 8T-8737 [8] PLUG-SEAL  
1B. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3S-2093 [1] STRAP-CABLE  
 

#SEBP42080288
 

336-3545: RADIO GP-COMMUNICATION

336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N M2R1-UP
PART OF 266-0853 CONTROL & MTG GP-COMMUNICATION
i03570343 SEBP4208
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  499-3794 [1] SOFTWARE GP-COMMUNICATION (PRODUCT LINK 121SR)  
 

#SEBP42080289
 

260-2192: SENSOR AS-PRESSURE

260-2192 SENSOR AS-PRESSURE
S/N M2R1-UP
PART OF 227-0445 LINES GP-PILOT
i02371588 SEBP4208
2602192 SENSOR AS-PRESSURE Parts scheme
  For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 221-8859 [1] SENSOR AS-PRESSURE (MAIN PUMP)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3K-0360 [1] SEAL-O-RING  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)(16-18 GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)(14 GA)  
  171-0596 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
2. 259-7729 [1] ADAPTER  
3. 260-2191 [1] SEAL-O-RING  
4. 095-1777 [1] RING-BACKUP  
 

Information:

Operation and Maintenance Manual
Circuit Breakers - Reset
345C Excavators
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Caterpillar Parts SIS Catalog 345C MH :

PANEL & MTG GP-CIRCUIT BREAKER
259-0035 PANEL & MTG GP-CIRCUIT BREAKER
MOUNTING GP-CAMERA
307-7757 MOUNTING GP-CAMERA
LIGHTING GP-FLOOD
255-4316 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
255-4316 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
163-6772 LIGHTING GP-FLOOD
LIGHTING GP-CHASSIS
261-4485 LIGHTING GP-CHASSIS
LAMP GP-FLOOD
219-6485 LAMP GP-FLOOD
LAMP GP-FLOOD
153-2523 LAMP GP-FLOOD
PANEL GP-CONTROL
289-3972 PANEL GP-CONTROL
PANEL GP-CONTROL
289-3972 PANEL GP-CONTROL
PANEL GP-SWITCH
238-1648 PANEL GP-SWITCH
PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH
PANEL GP-SWITCH
286-7116 PANEL GP-SWITCH
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
PLUG GP-CONNECTOR
235-8200 PLUG GP-CONNECTOR
336-3545 RADIO GP-COMMUNICATION

Truck sale:

Caterpillar 345CMH, Construction
92,000 
Caterpillar 345CMH, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
2009 CAT 345C MH
Call 
2009 CAT 345C MH

Process Inc.
Bellevue, Washington
CATERPILLAR 345 C MH 2005
 
CATERPILLAR 345 C MH 2005
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States
CATERPILLAR 345CMH 2006
 
CATERPILLAR 345CMH 2006
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States
CATERPILLAR 345CMH 2007
 
CATERPILLAR 345CMH 2007
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.