253-6149 WIRING GP-CAB S/N M2R254-UP PART OF 258-7942, 356-6719 CAB GP 345C MH EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 253-6149 WIRING GP-
1. 255-0861 WIRING GP-
2. 255-0861 WIRING GP-
3. 266-0079 WIRING GP-
4. 334-8428 WIRING GP-
5. 334-8686 WIRING GP-
6. 266-0852 WIRING GP-
7. 338-5968 WIRING GP-
8. 256-0122 WIRING GP-
9. 256-0123 WIRING GP-
0. INFORMATION

EXCAVATOR 345C MH EXCAVATOR M2R
345C Fixed Cab Riser Material Handler M2R00001-UP (MACHINE) POWERED BY C13 Engine SEBP4208 345C MH M2R (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

235-8200 PLUG GP-CONNECTOR

253-6149 WIRING GP-CAB

255-0861 WIRING GP-CAB RISER

266-0079 WIRING GP-CAB RISER

#SEBP42080340

253-6149: WIRING GP-CAB

WIRING GP-CAB

253-6149 WIRING GP-CAB
S/N M2R254-UP
PART OF 258-7942, 356-6719 CAB GP

i03624097 SEBP4208

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[14]	STRAP-CABLE
2.	7Y-5505	[2]	SPEAKER AS
			(EACH INCLUDES)
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3954	[1]	CONNECTOR-PLUG (3-PIN)
3.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
4.	099-7127 M	[8]	SCREW-MACHINE (M4X0.7X12-MM)
5.	102-8016	[1]	RESISTOR AS (BACKUP)
6.	113-8490 C	[26]	FUSE (10-AMPERE)
7.	113-8491	[8]	FUSE (15-AMPERE)
8.	116-0210	[4]	BRACKET AS
9.	324-5771	[2]	SOCKET-AUXILIARY POWER (12-VOLT)
10.	132-1829 Y	[1]	ALARM GP (24-VOLT)(FAULT)
11.	141-2759 C	[6]	FUSE (5-AMPERE)
12.	161-3128	[1]	RELAY (24-VOLT)(CHASSIS LIGHT)
12A.	161-3128	[1]	RELAY (24-VOLT)(BOOM LIGHTS)
12B.	161-3128	[1]	RELAY (24-VOLT)(CAB FLOODLIGHT)
12C.	161-3128	[1]	RELAY (24-VOLT)(NEUTRAL START)
12D.	161-3128	[1]	RELAY (24-VOLT)(ETHER)
12E.	161-3128	[1]	RELAY (24-VOLT)(WORK TOOL ROTATE, CCW)
12F.	161-3128	[1]	RELAY (24-VOLT)(WORK TOOL ROTATE, CW)
12G.	161-3128	[1]	RELAY (24-VOLT)(HORN)
13.	163-6703	[1]	TIMER AS-OFF DELAY (HYDRAULIC LOCKOUT)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	163-6758	[1]	WIRE AS
15.	259-4883	[1]	ANTENNA AS
	259-5082	[1]	CABLE AS
	259-5081	[1]	ROD
16.	167-3593	[1]	STRAP
17.	170-6888	[1]	PULLER-FUSE
18.	3S-2093	[1]	STRAP-CABLE
19.	301-7292	[1]	KIT-SERVICE METER
			(INCLUDES METER & FILM)
20.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY)
21.	227-7575	[1]	PANEL-CONTROL (SWITCH)
22.	234-1097	[1]	BRACKET
23.	238-2390	[1]	CABLE AS (RED)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
24.	238-2391	[1]	CABLE AS (PURPLE)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
25.	245-7760	[8]	INSULATION
26.	329-6097 C	[1]	HARNESS AS-CAB
	163-6659	[1]	CONNECTOR-PLUG (12-PIN)
	163-6699	[1]	CONNECTOR-PLUG (18-PIN)
	163-6790	[22]	TERMINAL (FEMALE)
	163-6803	[9]	PLUG-CONNECTOR (5-PIN)
	167-3630	[1]	CONNECTOR-PLUG
	167-3631	[2]	TERMINAL (FEMALE)
	170-6890	[5]	TERMINAL-BLADE (14-GA)
	170-6891	[29]	TERMINAL-BLADE (16-GA TO 18-GA)
	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	131-1474	[1]	TERMINAL AS
	5P-2321	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(4-CM)
	2L-8067	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[1]	SEAL
	144-1636	[17]	PIN-CONNECTOR (14-GA TO 18-GA)
	149-5051	[3]	CONNECTOR-RECEPTACLE
	149-5069	[16]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[24]	TERMINAL-BLADE (16-GA TO 20-GA)
	149-5071	[8]	TERMINAL-BLADE (12-GA TO 14-GA)
	153-2602	[8]	RECEPTACLE-CONNECTOR (1-PIN)
	153-2631	[8]	TERMINAL (14-GA TO 20-GA)
	128-8950	[1]	CONNECTOR-RECEPTACLE
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[24]	TERMINAL (MALE)
	121-1173	[24]	TERMINAL (MALE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM)
	126-1766	[23]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	2L-8065	[3]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8066	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	2L-8067	[7]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	7Y-3951	[13]	TERMINAL-BLADE (14-GA)
	7Y-3952	[4]	PLUG-CONNECTOR (2-PIN)
	7Y-3955	[2]	CONNECTOR-RECEPTACLE
	7Y-3958	[1]	CONNECTOR-PLUG (6-PIN)
	7Y-3966	[2]	TERMINAL AS
			(EACH INCLUDES)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3964	[1]	TUBE (CONNECTOR TERMINAL)
	7Y-3967	[10]	TERMINAL AS
			(EACH INCLUDES)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[1]	TUBE (RECEPTACLE TERMINAL)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	186-3736	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[24]	PLUG-SEAL
	5P-6271	[1]	CONNECTOR AS
	3M-6018	[1]	TERMINAL (0.1-M)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	102-7964	[2]	PLUG-CONNECTOR (16-PIN)
	102-7965	[84]	TERMINAL (FEMALE)
	111-4816	[1]	PLUG-CONNECTOR (13-PIN)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	238-2363	[6]	TERMINAL (FEMALE)
	238-2366	[10]	TERMINAL (MALE)
	7Y-3950	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	3S-2093	[124]	STRAP-CABLE
	238-2319	[1]	BASE AS (FUSE, RELAY PANEL)
	121-1022	[2]	DIODE
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
27.	260-1936	[1]	HARNESS AS-CAB (MAGNET)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[24]	PLUG-SEAL
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
28.	095-0742 M	[4]	SCREW-MACHINE (M6X1X16-MM)
29.	096-5962	[4]	WASHER-HARD (3.4X7X0.8-MM THK)
30.	132-5789	[8]	CLIP (LADDER)
31.	163-6795	[12]	STRAP-CABLE
32.	3C-6969 M	[4]	NUT (M3X0.5-THD)
33.	4P-7581	[1]	CLIP (LADDER)
34.	5C-2890 M	[8]	NUT (M6X1-THD)
35.	6V-5210 M	[8]	SCREW-MACHINE (M4X0.7X10-MM)
36.	6V-9671 M	[4]	SCREW-MACHINE (M3X0.5X12-MM)
37.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
38.	8T-4127 M	[2]	SCREW-MACHINE (M5X0.8X20-MM)
39.	8T-6693 M	[1]	SCREW-MACHINE (M5X0.8X16-MM)
40.	9X-2042 M	[13]	SCREW-TRUSS HEAD (M6X1X12-MM)
41.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
42.	101-2846 E		GUARD (28-CM)
43.	251-0637	[1]	INSULATION
44.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
45.	6V-9672 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
47.	149-5050	[1]	RELAY (24-VOLT)(HYDRAULIC CAB RISER)
47A.	149-5050	[1]	RELAY (24-VOLT)(HYDRAULIC CAB RISER, UP)
47B.	149-5050	[1]	RELAY (24-VOLT)(HYDRAULIC CAB RISER, DOWN)
48.	238-2212	[1]	SWITCH AS-ROCKER (FINE SWING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42080341

255-0861: WIRING GP-CAB RISER

WIRING GP-CAB RISER

255-0861 WIRING GP-CAB RISER -FIXED
S/N M2R1-UP
PART OF 354-4218 RISER GP-CAB
Type 1

i02194450 SEBP4208

2550861 WIRING GP-CAB RISER Parts scheme

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[3]	STRAP-CABLE
2.	111-4838	[10]	CLIP
3.	111-4839	[10]	STRAP
4.	116-0118	[2]	CLIP
5.	128-8886	[1]	STRAP AS-GROUND
6.	151-6667	[1]	SUPPORT AS
7.	163-6786	[1]	BRACKET
8.	204-1771	[1]	PLATE
9.	204-1816	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	260-1933	[1]	HARNESS AS-CAB (RISER)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	163-6637	[1]	RECEPTACLE AS-CONNECTOR (54-PIN, BLACK)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11.	260-1934	[1]	HARNESS AS-MONITOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	132-5789	[1]	CLIP (LADDER)
13.	2Y-5829 M	[1]	NUT (M10X1.5-THD)
14.	3E-5169	[1]	GUARD-SWITCH
15.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
16.	5C-7883 M	[4]	BOLT-SOCKET HEAD (M6X1X16-MM)
17.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
18.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
19.	7X-2621 M	[1]	BOLT (M10X1.5X12-MM)
20.	8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[12]	BOLT (M10X1.5X20-MM)
23.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
24.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
25.	087-4587	[2]	GROMMET

	096-0061 BF	[10]	STRAP-CABLE
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP42080342

255-0861: WIRING GP-CAB RISER

WIRING GP-CAB RISER

255-0861 WIRING GP-CAB RISER -FIXED
S/N M2R1-UP
PART OF 354-4218 RISER GP-CAB
Type 2

i03132009 SEBP4208

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[3]	STRAP-CABLE
2.	111-4838	[10]	CLIP
3.	111-4839	[10]	STRAP
4.	116-0118	[2]	CLIP
5.	128-8886	[1]	STRAP AS-GROUND
6.	151-6667	[1]	SUPPORT AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	163-6786	[1]	BRACKET
8.	204-1771	[1]	PLATE
10.	324-9261 C	[1]	HARNESS AS-CAB (RISER)
	131-1498	[2]	TERMINAL AS
			(EACH INCLUDES)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	197-4385	[1]	DIODE
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[54]	PIN-CONNECTOR (16-GA TO 18-GA)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	8T-8737	[31]	PLUG-SEAL
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	163-6637	[1]	RECEPTACLE AS-CONNECTOR (54-PIN, BLACK)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	8N-1547	[1]	SOCKET-CONNECTOR (6-GA)
	9X-3402	[68]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[5]	STRAP-CABLE
	131-1488	[1]	TERMINAL AS-RING (6-GA TO 8-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8066	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
11.	260-1934	[1]	HARNESS AS-MONITOR
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[3]	PLUG-SEAL
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	132-5789	[1]	CLIP (LADDER)
13.	2Y-5829 M	[1]	NUT (M10X1.5-THD)
14.	3E-5169	[1]	GUARD-SWITCH
15.	158-6634 CY	[1]	SWITCH GP-TOGGLE (SECONDARY SHUTDOWN)
16.	5C-7883 M	[4]	BOLT-SOCKET HEAD (M6X1X16-MM)
17.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
18.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
19.	7X-2621 M	[1]	BOLT (M10X1.5X12-MM)
20.	8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[12]	BOLT (M10X1.5X20-MM)
23.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
24.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
25.	087-4587	[2]	GROMMET
26.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
27.	096-0061 B	[19]	STRAP-CABLE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42080343

266-0079: WIRING GP-CAB RISER

WIRING GP-CAB RISER

266-0079 WIRING GP-CAB RISER
S/N M2R187-253
PART OF 253-6149 WIRING GP-CAB

i02497090 SEBP4208

2660079 WIRING GP-CAB RISER Parts scheme

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	257-2822	[1]	COVER
2.	259-4884	[1]	BRACKET AS
3.	7N-2353	[1]	SWITCH AS-TOGGLE (HYDRAULIC CAB RISER)
3A.	266-0074	[1]	HARNESS AS-WIRING
	3S-2093	[1]	STRAP-CABLE
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
	5P-2321	[2]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
4.	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
	M		METRIC PART

#SEBP42080344

334-8428: WIRING GP-CAMERA

WIRING GP-CAMERA

334-8428 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

i03565642 SEBP4208

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	7K-1181	[7]	STRAP-CABLE
4.	261-3223	[1]	CABLE AS-COMMUNICATION
5.	266-2116	[1]	CABLE-COMMUNICATION (7.5-M)
6.	319-1037	[1]	BRACKET AS
7.	093-2064	[1]	GROMMET
8.	111-4836	[2]	CLIP
9.	1R-6072	[1]	GROMMET
10.	5K-0430	[1]	CLIP
11.	5P-8522	[1]	GROMMET
12.	8M-2773	[1]	CLIP (LOOP)
13.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP42080345

334-8686: WIRING GP-CAMERA

WIRING GP-CAMERA

334-8686 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

i03565639 SEBP4208

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	7K-1181	[14]	STRAP-CABLE
3.	306-8590	[1]	HARNESS AS-WIRING (WORK AREA VISUAL SYSTEM, REAR)

#SEBP42080346

266-0852: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

266-0852 WIRING GP-COMMUNICATION
S/N M2R1-UP
PART OF 266-0896 INSTALLATION AR-COMMUNICATION

i02746935 SEBP4208

2660852 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7K-1181	[6]	STRAP-CABLE
3.	9X-3495	[1]	CLIP AS
4.	116-0118	[3]	CLIP
5.	259-4887 Y	[1]	HARNESS AS-WIRING (PRODUCT LINK)
6.	259-4940 Y	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
7.	259-5258	[1]	HARNESS AS-CONTROL (PRODUCT LINK, ANTENNA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8.	091-9035	[1]	SPACER (11X25X20-MM THK)
9.	111-4837	[1]	CLIP
10.	132-5789	[1]	CLIP (LADDER)
11.	4I-7889	[1]	SPACER (11X25X45-MM THK)
12.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
14.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
15.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
16.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42080347

338-5968: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

338-5968 WIRING GP-COMMUNICATION -WORK AREA VISUAL SYSTEM, REAR
S/N M2R1-UP
PART OF 329-5077 CAMERA AR

i03792209 SEBP4208

3385968 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	7K-1181	[12]	STRAP-CABLE
2.	251-8248	[1]	CABLE AS-COMMUNICATION

#SEBP42080348

256-0122: WIRING GP-CONSOLE

WIRING GP-CONSOLE

256-0122 WIRING GP-CONSOLE -LH
S/N M2R1-UP
PART OF 259-0032 WIRING GP-CONSOLE

i02194403 SEBP4208

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	163-6795	[1]	STRAP-CABLE
3.	253-6142	[1]	HARNESS AS-CONSOLE (LH)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)

#SEBP42080349

256-0123: WIRING GP-CONSOLE

WIRING GP-CONSOLE

256-0123 WIRING GP-CONSOLE -RH
S/N M2R1-182
PART OF 259-0032 WIRING GP-CONSOLE

i02194406 SEBP4208

For full view, you need register

Parts for your 345C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-0238	[1]	SWITCH AS-TOGGLE (GRAPPLE, MAGNET)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
2.	163-6710	[1]	SWITCH AS-TOGGLE (AUTO/MANUAL ENG SPEED CONTROL)
3.	163-6711	[1]	SWITCH AS-TOGGLE (MANUAL ENGINE SPEED CONTROL)
4.	163-6795	[4]	STRAP-CABLE
5.	234-1113	[1]	BRACKET
6.	253-6143	[1]	HARNESS AS-CONSOLE (RH)
	3S-2093	[18]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
8.	9X-2043 M	[3]	SCREW-TRUSS HEAD (M6X1X14-MM)
9.	204-4559	[1]	PLATE AS
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
345C Excavators

Battery - Recycle
345C Excavators

Battery Disconnect Switch
345C Excavators

Power Receptacle - If Equipped
345C Excavators

Fuses - Replace
345C Excavators

Camera Harness - Disconnect and Connect
345C Excavators

SmartBoom Control - If Equipped
345C Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Monitoring System
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Switches
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Sensors
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Monitoring System
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
345C Material Handler Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

System Schematic
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

Indicator for Volts Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Positive Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Generator Hot
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Over 75% Duty Cycle
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

Indicator for Negative Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

MID 105 - CID 0586 - FMI 05
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0586 - FMI 12
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 1178 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 1178 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0588 - FMI 09
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0600 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Component and Connector Locations
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

Indicator for Volts Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Over 75% Duty Cycle
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Generator Hot
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Positive Ground Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Negative Ground Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

MID 105 - CID 0096 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Connector Locations
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

New Software Prevents a False Warning for the Hydraulic Oil Temperature and a False Message During the Calibration of the Fan Speed {1408, 7610, 7620}
2007/09/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2011/04/04

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22

A Troubleshooting Procedure is Available for the Operation Check Relay on Certain Excavators {1408, 7301}
2010/07/28

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

A New Engine Harness Assembly Is Now Used on Certain Machines Equipped with C11 and C13 Engines {1408}
2013/04/09

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 345C MH :

253-6149 WIRING GP-CAB

239-1134 VALVE GP-ETHER STARTING

238-2208 SWITCH GP-WIPER

158-6634 SWITCH GP-TOGGLE

9G-7641 SWITCH GP-START

106-0107 SWITCH GP-ROTARY

275-1253 SWITCH GP-PRESSURE

258-0883 SWITCH GP-PRESSURE

255-0861 WIRING GP-CAB RISER

266-0079 WIRING GP-CAB RISER

334-8428 WIRING GP-CAMERA

334-8686 WIRING GP-CAMERA

266-0852 WIRING GP-COMMUNICATION

338-5968 WIRING GP-COMMUNICATION

256-0122 WIRING GP-CONSOLE

Truck sale:

92,000

Caterpillar 345CMH, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC

Call

2009 CAT 345C MH

Process Inc.
Bellevue, Washington

CATERPILLAR 345 C MH 2005
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States

CATERPILLAR 345CMH 2006
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States

CATERPILLAR 345CMH 2007
- MATERIAL HANDLERS / DEMOLITION
MACALLISTER MACHINERY
United States