BASIC ENGINE
LIFTING GP-ENGINECYLINDER BLOCK GP
MOUNTING GP-ALTERNATOR
COUPLING GP
BASIC ENGINE
LIFTING GP-ENGINE
#SEBP42140090
359-9830: LIFTING GP-ENGINE
359-9830 LIFTING GP-ENGINE
S/N 1EZ4389-UP
S/N 1EZ4389-UP
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1N-3722 | [1] | BRACKET-LIFTING (REAR, LH) | |
| 2. | 7N-1751 | [1] | BRACKET-LIFTING (FRONT, RH) | |
| 3. | 9Y-6665 | [1] | BRACKET AS | |
| 4. | 0S-1585 | [6] | BOLT (1/2-13X1.5-IN) | |
| 5. | 0S-1587 | [2] | BOLT (1/2-13X1.75-IN) | |
| 6. | 2M-0849 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 7. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) |
#SEBP42140091
483-3678: LIFTING GP-ENGINE
483-3678 LIFTING GP-ENGINE
S/N 1EZ4389-UP
S/N 1EZ4389-UP
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS#SEBP42140092
7N-7767: LIFTING GP-ENGINE
7N-7767 LIFTING GP-ENGINE
S/N 1EZ4389-UP
S/N 1EZ4389-UP
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS#SEBP42140093
159-9778: LINER-CYLINDER BLOCK
159-9778 LINER-CYLINDER BLOCK
S/N RTY1-UP
LINER FEATURES SLIGHTLY INCREASED NOMINAL SIZE INSIDE DIAMETER
FIELD INSTALLATION
S/N RTY1-UP
LINER FEATURES SLIGHTLY INCREASED NOMINAL SIZE INSIDE DIAMETER
FIELD INSTALLATION
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP42140094
1W-1340: MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
S/N 1EZ4389-UP
Type 1
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
S/N 1EZ4389-UP
Type 1
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-4460 | [1] | BRACKET | |
| 2. | 9L-6639 | [1] | V-BELT (ALTERNATOR) | |
| 3. | 6N-2723 | [1] | SUPPORT-ALTERNATOR | |
| 4. | 1A-8537 | [1] | BOLT (5/8-11X2.75-IN) | |
| 5. | 4K-0367 | [3] | NUT-FULL (5/8-11-THD) | |
| 6. | 4D-3704 | [3] | WASHER-HARD (17X30X5-MM THK) | |
| 7. | 8S-5383 | [1] | BLOCK | |
| 8. | 1S-4589 | [1] | ROD | |
| 9. | 0S-1587 | [1] | BOLT (1/2-13X1.75-IN) | |
| 10. | 2M-0849 | [3] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 11. | 4N-8225 | [1] | PULLEY-ALTERNATOR (1-GROOVE) | |
| 12. | 1A-7669 | [1] | BOLT (1/2-13X7-IN) | |
| 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | ||
| 13. | 1A-5964 | [2] | BOLT (3/8-16X4.5-IN) | |
| 14. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 15. | 3B-1915 | [3] | BOLT (3/8-16X1.375-IN) | |
| 16. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 2R-1494 | [1] | SPACER (0.562X1X1.31-IN THK) |
#SEBP42140095
1W-1340: MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
S/N 1EZ4389-UP
Type 2
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
S/N 1EZ4389-UP
Type 2
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-4460 | [1] | BRACKET | |
| 2. | 9L-6639 | [1] | V-BELT (ALTERNATOR) | |
| 3. | 6N-2723 | [1] | SUPPORT-ALTERNATOR | |
| 4. | 1A-8537 | [1] | BOLT (5/8-11X2.75-IN) | |
| 5. | 4K-0367 C | [1] | NUT-FULL (5/8-11-THD) | |
| 6. | 4D-3704 C | [1] | WASHER-HARD (17X30X5-MM THK) | |
| 7. | 252-6464 C | [1] | BLOCK | |
| 8. | 252-6498 C | [1] | ROD | |
| 9. | 1A-1460 | [1] | BOLT (1/2-13X2-IN) | |
| 10. | 2M-0849 | [3] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 11. | 4N-8225 | [1] | PULLEY-ALTERNATOR (1-GROOVE) | |
| 12. | 1A-7669 | [1] | BOLT (1/2-13X7-IN) | |
| 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | ||
| 13. | 1A-5964 | [2] | BOLT (3/8-16X4.5-IN) | |
| 14. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 15. | 3B-1915 | [3] | BOLT (3/8-16X1.375-IN) | |
| 16. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 2R-1494 | [1] | SPACER (0.562X1X1.31-IN THK) | |
| 18. | 2J-3506 C | [2] | NUT-FULL (3/4-10-THD) | |
| 19. | 5P-8248 C | [2] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP42140096
452-1373: MOUNTING GP-ALTERNATOR
452-1373 MOUNTING GP-ALTERNATOR
S/N 1EZ4389-UP
S/N 1EZ4389-UP
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-2723 | [1] | SUPPORT-ALTERNATOR | |
| 2. | 7N-4460 | [1] | BRACKET | |
| 3. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 4. | 1A-5964 | [2] | BOLT (3/8-16X4.5-IN) | |
| 5. | 1A-8537 | [1] | BOLT (5/8-11X2.75-IN) | |
| 6. | 252-6464 | [1] | BLOCK | |
| 7. | 252-6498 | [1] | ROD | |
| 8. | 2J-3506 | [2] | NUT-FULL (3/4-10-THD) | |
| 9. | 3B-1915 | [3] | BOLT (3/8-16X1.375-IN) | |
| 10. | 4D-3704 | [1] | WASHER-HARD (17X30X5-MM THK) | |
| 11. | 4K-0367 | [1] | NUT-FULL (5/8-11-THD) | |
| 12. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 5P-8248 | [2] | WASHER-HARD (20X36.5X3.5-MM THK) |
#SEBP42140097
452-1374: MOUNTING GP-ALTERNATOR
452-1374 MOUNTING GP-ALTERNATOR
S/N 1EZ4389-UP
S/N 1EZ4389-UP
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-4474 | [2] | BRACKET | |
| 2. | 6N-2723 | [1] | SUPPORT-ALTERNATOR | |
| 3. | 7E-9802 | [1] | SHIELD AS-HEAT | |
| 4. | 7N-4460 | [1] | BRACKET | |
| 5. | 252-6464 | [1] | BLOCK | |
| 6. | 252-6498 | [1] | ROD | |
| 7. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 8. | 5S-7382 | [3] | BOLT (3/8-16X1.375-IN) | |
| 9. | 7X-0292 | [2] | BOLT (3/8-16X4.5-IN) | |
| 10. | 7X-0448 | [1] | NUT (5/8-11-THD) | |
| 11. | 8B-8679 | [4] | SPACER (0.406X0.75X0.44-IN THK) | |
| 12. | 8C-6362 | [1] | BOLT (5/8-11X2.75-IN) | |
| 13. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 14. | 8T-4896 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | |
| 16. | 2J-3506 | [2] | NUT-FULL (3/4-10-THD) | |
| 17. | 5P-8248 | [2] | WASHER-HARD (20X36.5X3.5-MM THK) |
#SEBP42140098
4P-4061: MOUNTING GP-ALTERNATOR
4P-4061 MOUNTING GP-ALTERNATOR
S/N 1EZ4389-UP
FOR USE WITH @@@@@ 5N-5692@@@@@, ALTERNATOR GUARD
CANNOT BE USED WITH SERIES TURBO ENGINES
S/N 1EZ4389-UP
FOR USE WITH @@@@@ 5N-5692@@@@@, ALTERNATOR GUARD
CANNOT BE USED WITH SERIES TURBO ENGINES
For full view, you need register
Parts for your 3412C GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-2723 | [1] | SUPPORT-ALTERNATOR | |
| 2. | 9L-6639 | [1] | V-BELT (ALTERNATOR) | |
| 3. | 7X-0292 | [2] | BOLT (3/8-16X4.5-IN) | |
| 4. | 8T-9377 | [1] | BOLT (3/8-16X2.25-IN) | |
| 5. | 4N-8225 | [1] | PULLEY-ALTERNATOR (1-GROOVE) | |
| 6. | 7X-0341 | [1] | BOLT (1/2-13X7-IN) | |
| 7. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 9. | 8C-6362 | [1] | BOLT (5/8-11X2.75-IN) | |
| 10. | 1S-4589 | [1] | ROD | |
| 11. | 8S-5383 | [1] | BLOCK | |
| 12. | 7X-0448 | [3] | NUT (5/8-11-THD) | |
| 13. | 8T-8919 | [1] | BOLT (1/2-13X1.75-IN) | |
| 14. | 2R-1494 | [1] | SPACER (0.562X1X1.31-IN THK) | |
| 15. | 5S-7382 | [3] | BOLT (3/8-16X1.375-IN) | |
| 16. | 7N-4460 | [1] | BRACKET | |
| 17. | 8T-4122 | [3] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 2W-4474 | [2] | BRACKET | |
| 20. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 21. | 7E-9802 | [1] | SHIELD AS-HEAT | |
| 9F-2978 | NUT-WELD (3/8-16-THD) | |||
| 22. | 8B-8679 | [4] | SPACER (0.406X0.75X0.44-IN THK) |
#SEBP42140099
151-7794: MOUNTING GP-ENGINE FLEXIBLE
151-7794 MOUNTING GP-ENGINE FLEXIBLE
S/N RTY1-UP
REQUIRES 591 THRU 594 FRAME 50-HERTZ GENERATOR, REQUIRES 592 THRU 597 FRAME 60-HERTZ GENERATOR
CANNOT BE USED WITH 595 THRU 598 FRAME 50-HERTZ GENERATOR, OR 591 FRAME 60-HERTZ GENERATOR
AN ATTACHMENT
S/N RTY1-UP
REQUIRES 591 THRU 594 FRAME 50-HERTZ GENERATOR, REQUIRES 592 THRU 597 FRAME 60-HERTZ GENERATOR
CANNOT BE USED WITH 595 THRU 598 FRAME 50-HERTZ GENERATOR, OR 591 FRAME 60-HERTZ GENERATOR
AN ATTACHMENT
For full view, you need register
Information:
Caterpillar Parts SIS Catalog 3412C :
Truck sale:
95,000
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
145,000
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
