AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

245-3662 BARREL GP-MOTOR S/N BCZ2001-99999 PART OF 245-3660 ROTATING GP-MOTOR M318C WHEELED EXCAVATOR


HYDRAULIC SYSTEM
MOTOR GP
PUMP GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
HYDRAULIC SYSTEM
CONVERSION GP
COUPLING GP
CYLINDER GP

WHEELED EXCAVATOR M318C WHEELED EXCAVATOR BCZ
 M318C Excavator BCZ02001-UP (MACHINE) POWERED BY 3056E Engine SEBP4222 M318C BCZ   (2001)

HYDRAULIC SYSTEM

MOTOR GP
BARREL GP-MOTOR
245-3662 BARREL GP-MOTOR
HEAD GP-MOTOR
245-3661 HEAD GP-MOTOR
MOTOR & MTG GP-HYDRAULIC FAN
186-0509 MOTOR & MTG GP-HYDRAULIC FAN
MOTOR & MTG GP-HYDRAULIC FAN
256-7450 MOTOR & MTG GP-HYDRAULIC FAN
 

#SEBP42220270
 

245-3662: BARREL GP-MOTOR

245-3662 BARREL GP-MOTOR
S/N BCZ2001-99999
PART OF 245-3660 ROTATING GP-MOTOR
i02174421 SEBP4222
2453662 BARREL GP-MOTOR Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-9851 [1] BARREL  
2. 124-9852 [1] PLATE-CONTROL  
3. 124-9853 [1] PIN-CENTER  
4. 165-6988 [7] PISTON AS  
    (EACH INCLUDES)
  124-9863 [2] RING  
5. 124-9855 B [1] SHIM (4.5-MM THK)  
6. 124-9856 B [1] SHIM (4.6-MM THK)  
7. 124-9857 B [1] SHIM (4.7-MM THK)  
8. 124-9858 B [1] SHIM (4.8-MM THK)  
9. 124-9859 B [1] SHIM (4.9-MM THK)  
10. 124-9860 B [1] SHIM (5-MM THK)  
11. 124-9861 [1] SPRING  
12. 124-9862 [1] PLATE-RETAINING  
13. 216-0029 M [14] SCREW (M6X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42220271
 

136-7701: BARREL GP-PUMP

136-7701 BARREL GP-PUMP
S/N BCZ2001-99999
PART OF 190-8199 PUMP GP-PISTON
i00503421 SEBP4222
1367701 BARREL GP-PUMP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-7703 [1] CYLINDER AS  
2. 117-7238 [9] PISTON  
3. 117-7239 [1] SPRING SET  
4. 117-7240 [1] CRADLE  
5. 117-7241 [1] PLATE  
6. 117-7242 [1] SHAFT-DRIVE  
7. 1G-3410 [1] WIRE  
8. 112-4657 [1] PIN  
9. 122-9068 [1] WIRE  
10. 117-7245 B [1] SHIM (1.2-MM THK)  
11. 117-7246 B [1] SHIM (1-MM THK)  
12. 117-7247 B [1] SHIM (0.8-MM THK)  
13. 117-7248 B [1] SHIM (0.6-MM THK)  
14. 117-7249 [1] PLATE-RETAINER  
15. 117-7250 [1] RETAINER  
16. 125-9134 [1] BEARING AS  
17. 122-9070 B [2] SHIM (3-MM THK)  
18. 122-9071 [1] SPRING  
19. 117-7251 [1] BEARING  
20. 340-5800 [1] BEARING AS-ROLLER  
21. 6V-5200 [1] RING-RETAINING  
22. 095-0941 [2] RING-RETAINING  
23. 194-1983 [1] SEAL-SHAFT  
24. 6V-7723 [1] RING-RETAINING  
  B   USE AS REQUIRED
 

#SEBP42220272
 

187-3794: CONTROL GP-BRAKE

187-3794 CONTROL GP-BRAKE
S/N BCZ2001-99999
PART OF 243-4100 OPERATOR AR
i02125679 SEBP4222
1873794 CONTROL GP-BRAKE Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 314-2877 C [1] SWITCH-PRESSURE (BRAKE OIL ACCUMULATOR)  
2. 8T-5063 [1] ROD END  
3. 8T-5381 [1] PIN AS-SPRING  
4. 121-5977 [1] PLATE  
5. 160-1501 Y [1] PEDAL GP-BRAKE  
6. 252-6677 [1] SWITCH AS-PRESSURE (SERVICE BRAKE)  
7. 249-5527 CY [1] VALVE GP-BRAKE CONTROL  
8. 193-7788 [1] BRACKET  
9. 240-1366 [1] SWITCH AS-POSITION (OSCILLATING AXLE LOCK)  
10. 194-7843 [1] MAGNET  
11. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
12. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
13. M [2] SCREW (M3X0.5X8-MM)  
14. 3C-6969 M [2] NUT (M3X0.5-THD)  
15. 4J-5309 [3] SEAL-O-RING  
16. 5C-7261 M [3] NUT (M8X1.25-THD)  
17. 5W-1696 C [2] WASHER-SEALING (12.2X15.4X1.5-MM)  
18. 294-4826 M [3] BOLT-SOCKET HEAD (M8X1.25X80-MM)  
19. 8T-4133 M [1] NUT (M10X1.5-THD)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42220273
 

243-4091: CONVERSION AR-HYDRAULIC

243-4091 CONVERSION AR-HYDRAULIC
S/N BCZ2001-99999
CANNOT BE USED WITH OFFSET BOOM
AN ATTACHMENT
i02097634 SEBP4222
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  245-1472 Y [1] CONTROL GP-HANDLE (WITH TWO SLIDE CONTROLS)  
  243-2232 Y [1] VALVE & LINES GP-PILOT  
  248-2039 Y [1] WIRING GP-MEDIUM PRESSURE  
   
  264-2000 [1] FILM-IDENTIFICATION (STEERING, MEDIUM PRESSURE)  
    (LOCATE ON LH SEAT CONSOLE ADJACENT TO THE TOGGLE SWITCH)
  Y   SEPARATE ILLUSTRATION
 

#SEBP42220274
 

275-4912: COUPLING GP-FLEXIBLE

275-4912 COUPLING GP-FLEXIBLE
S/N BCZ2001-99999
PART OF 186-0471 HYDRAULIC AR-UPPER
i02559761 SEBP4222
2754912 COUPLING GP-FLEXIBLE Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-9680 Y [1] COUPLING GP-PUMP  
2. 7X-3174 [8] BOLT (3/8-24X1.375-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42220275
 

134-9680: COUPLING GP-PUMP

134-9680 COUPLING GP-PUMP
S/N BCZ2001-99999
PART OF 275-4912 COUPLING GP-FLEXIBLE
i02559819 SEBP4222
1349680 COUPLING GP-PUMP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-4429 M [1] BOLT (M16X2X40-MM)  
2. 134-9682 [1] HUB  
3. 170-1350 [1] WASHER (16.5X55X12-MM THK)  
4. 154-5558 [1] FLANGE  
  M   METRIC PART
 

#SEBP42220276
 

111-1897: CYLINDER & MTG GP-AXLE LOCK

111-1897 CYLINDER & MTG GP-AXLE LOCK
S/N BCZ2001-99999
PART OF 243-4098 HYDRAULIC AR-LOWER
i01899601 SEBP4222
1111897 CYLINDER & MTG GP-AXLE LOCK Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 226-3699 CY [2] CYLINDER GP-AXLE OSC LOCK  
2. 304-9129 M [8] BOLT (M20X2.5X55-MM)  
3. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42220277
 

183-8873: CYLINDER & SEAL GP-BOOM

183-8873 CYLINDER & SEAL GP-BOOM -STUB
S/N BCZ2001-99999
PART OF 185-8547 BOOM AR-VARIABLE ADJUSTABLE
AN ATTACHMENT
i01549529 SEBP4222
1838873 CYLINDER & SEAL GP-BOOM Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-4597 [2] SEAL-LIP TYPE  
2. 096-0854 [2] SEAL-LIP TYPE  
3. 183-8850 Y [1] CYLINDER GP-BOOM  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42220278
 

183-8874: CYLINDER & SEAL GP-BOOM

183-8874 CYLINDER & SEAL GP-BOOM
S/N BCZ2001-99999
PART OF 185-8540 BOOM AR
AN ATTACHMENT
i01585407 SEBP4222
1838874 CYLINDER & SEAL GP-BOOM Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-4597 [2] SEAL-LIP TYPE  
2. 096-0854 [2] SEAL-LIP TYPE  
3. 183-8851 Y [1] CYLINDER GP-BOOM  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42220279
 

183-8875: CYLINDER & SEAL GP-BOOM

183-8875 CYLINDER & SEAL GP-BOOM -FORE
S/N BCZ2001-99999
PART OF 185-8547 BOOM AR-VARIABLE ADJUSTABLE
AN ATTACHMENT
i01549484 SEBP4222
1838875 CYLINDER & SEAL GP-BOOM Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-4597 [2] SEAL-LIP TYPE  
2. 183-8852 Y [1] CYLINDER GP-BOOM  
3. 9X-4598 [2] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Improvements to the Load Sensing Circuit for Better Travel Response{4351, 5057, 5479}
Improvements to the Load Sensing Circuit for Better Travel Response{4351, 5057, 5479}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Technical Information Bulletin
The Motor for the Magnet Generator Fails{1386, 5061}
The Motor for the Magnet Generator Fails{1386, 5061}
Specifications
Swing Motor
M318C Wheeled Excavator Machine System
Travel Motor
M318C Wheeled Excavator Machine System
Travel Motor
M318C Wheeled Excavator Machine System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Travel Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Hydraulic System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Travel Brake Valve
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Hydraulic System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Swing Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Travel Brake Valve
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Travel Motor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Information Release Memo
Product Line Additions: Remanufactured Pumps and Motors
Product Line Additions: Remanufactured Pumps and Motors
Testing and Adjusting
Swing Motor - Test - Measurement of Case Drain Oil
M318C Excavator Hydraulic System
Travel Motor (Stall Pressure) - Test and Adjust
M318C Excavator Hydraulic System
Travel Motor (Upstroke Pressure) - Test and Adjust
M318C Excavator Hydraulic System
Travel Motor (Drive Shaft Speed) - Test and Adjust
M318C Excavator Hydraulic System
Relief Valve (Travel Motor) - Test and Adjust
M318C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
M318C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Swing Motor - Test - Measurement of Case Drain Oil
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Relief Valve (Travel Motor) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Travel Motor Speed - Calibrate
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Travel Motor (Upstroke Point) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Travel Motor (Destroke Point) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Travel Motor Speed - Calibrate
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Troubleshooting
MID 039 - CID 2104 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 2104 - FMI 05
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 2104 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Disassembly and Assembly
Travel Motor - Remove
M318C Wheeled Excavator Power Train
Travel Motor - Install
M318C Wheeled Excavator Power Train
Swing Motor - Disassemble
M318C Excavator Machine Systems
Swing Motor - Assemble
M318C Excavator Machine Systems
Swing Motor - Remove
M318C Excavator Machine Systems
Swing Motor - Install
M318C Excavator Machine Systems
Gear Motor (Fan Drive) - Assemble
M318C and M322C Excavators Machine Systems
Gear Motor (Fan Drive) - Disassemble
M318C Excavator Machine Systems
Gear Motor (Fan Drive) - Remove
M318C Excavator Machine Systems
Gear Motor (Fan Drive) - Install
M318C Excavator Machine Systems
Travel Motor - Disassemble
M318C and M322C Excavators Machine Systems
Travel Motor - Assemble
M318C Wheeled Excavator Power Train
Service Magazine
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
Replacing the Plug in the Travel Motor Valve {4351, 5058, 5455}
2006/03/20
Improved Travel Motor Response {4351, 5057, 5479}
2006/09/18

Caterpillar Parts SIS Catalog M318C :

ACTUATOR GP-PUMP
178-2823 ACTUATOR GP-PUMP
ACTUATOR GP-PUMP
146-6553 ACTUATOR GP-PUMP
ACTUATOR GP-PUMP
117-5712 ACTUATOR GP-PUMP
ACTUATOR GP-PUMP
117-5710 ACTUATOR GP-PUMP
ACTUATOR GP-HYDRAULIC
265-3742 ACTUATOR GP-HYDRAULIC
ACTUATOR GP
207-4706 ACTUATOR GP
ACTUATOR GP
207-4704 ACTUATOR GP
ACCUMULATOR GP-HYDRAULIC
8U-6159 ACCUMULATOR GP-HYDRAULIC
BARREL GP-PUMP
136-7701 BARREL GP-PUMP
CONTROL GP-BRAKE
187-3794 CONTROL GP-BRAKE
243-4091 CONVERSION AR-HYDRAULIC
COUPLING GP-FLEXIBLE
275-4912 COUPLING GP-FLEXIBLE
COUPLING GP-PUMP
134-9680 COUPLING GP-PUMP
CYLINDER & MTG GP-AXLE LOCK
111-1897 CYLINDER & MTG GP-AXLE LOCK
CYLINDER & SEAL GP-BOOM
183-8873 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BOOM
183-8874 CYLINDER & SEAL GP-BOOM

Truck sale:

Caterpillar M318C, Construction
19,000 USD 
Caterpillar M318C, Construction
- wheel excavator
H.O. PENN MACHINERY CO., INC.
Caterpillar M318C, Construction
64,763 
Caterpillar M318C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M318C, Construction
36,800 
Caterpillar M318C, Construction
- wheel excavator
KELLY TRACTOR CO.
CATERPILLAR M318C 2005
 
CATERPILLAR M318C 2005
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
 
$64,442 USD 
CATERPILLAR M318C 2003
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.