186-0476 CHASSIS AR S/N BDX2001-99999 PART OF 186-0516 GENERAL AR M316C WHEELED EXCAVATOR

Part No	Qty	Parts name
241-8725 Y	[1]	BATTERY & WIRING GP
		S/N BDX2001-99999
241-8739 Y	[1]	BOX GP-JUNCTION
		S/N BDX2001-99999
241-8741 Y	[1]	CONTROL & MTG GP-MACHINE (ENGINE, HYDRAULIC)
		S/N BDX2001-99999
188-4349 Y	[1]	COUNTERWEIGHT GP
117-7985 Y	[1]	DRIVE GP-SWING
243-3500 Y	[1]	FRAME GP-UPPER
		S/N BDX2001-99999
190-8206 Y	[1]	GEAR & BEARING GP-SWING
190-8208 Y	[1]	GUARD GP-BOTTOM
Y	[1]	HOOD & GUARD AR
186-0484 Y	[1]	HORN GP-ELECTRIC
190-0286 Y	[1]	LIGHTING GP-ROADING
186-0502 Y	[1]	LINES GP-FUEL
214-8993 Y	[1]	LINES GP-GREASE
111-1857 Y	[1]	LITERATURE GP
Y	[1]	OPERATOR AR
		S/N BDX2001-99999
190-0295 Y	[1]	PLATE & FILM GP
190-8209 Y	[1]	TANK & MTG GP-FUEL
241-8729 Y	[1]	WIRING GP-CHASSIS
		S/N BDX2001-99999
241-8727 Y	[1]	WIRING GP-CHASSIS
		S/N BDX2001-99999
Y		SEPARATE ILLUSTRATION

#SEBP42230002

198-4697: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

198-4697 CONVERSION AR-MACHINE
S/N BDX2001-99999
PART OF 235-1827 STABILIZER AR
AN ATTACHMENT

i02033264 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
233-8261 Y	[1]	LINES GP-HYDRAULIC
		S/N BDX2001-99999
188-4954 Y	[1]	WIRING GP-UNDERCARRIAGE/SWIVEL
Y		SEPARATE ILLUSTRATION

#SEBP42230003

243-4070: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

243-4070 CONVERSION AR-MACHINE
S/N BDX2001-99999
FOR USE WITH DOZER BLADE FRONT SIDE ONLY, DOZER/DOZER OR DOZER/STABLIZER, ONE OR TWO SETS OF OUTRIGGERS
CANNOT BE USED WITH DOZER BLADE REAR SIDE ONLY
AN ATTACHMENT

i02176882 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
233-8261 Y	[1]	LINES GP-HYDRAULIC
241-8712 Y	[1]	WIRING GP-STABILIZER (BLADE/STABILIZER)
Y		SEPARATE ILLUSTRATION

#SEBP42230004

186-0516: GENERAL AR

GENERAL AR

186-0516 GENERAL AR
S/N BDX2001-99999

i02174238 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
186-0476 Y	[1]	CHASSIS AR
188-5097 Y	[1]	ENGINE AR-PRIMARY
Y	[1]	FRAME AR-UNDERCARRIAGE
		S/N BDX2001-99999
Y	[1]	HYDRAULIC AR-LOWER
		S/N BDX2001-99999
186-0479 Y	[1]	HYDRAULIC AR-UPPER
186-0480 Y	[1]	INSTALLATION AR-ENGINE
Y	[1]	POWER TRAIN AR
		S/N BDX2001-99999
Y		SEPARATE ILLUSTRATION

#SEBP42230005

190-0283: ROADING AR

ROADING AR

190-0283 ROADING AR -GERMAN
S/N BDX2001-99999
30 KM/H
AN ATTACHMENT

i01545353 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-1119	[2]	WASHER (9.8X18.5X1.5-MM THK)
2.	114-8907	[2]	CLAMP
3.	123-3605	[4]	SCREW-SPECIAL
4.	126-3831	[1]	PLATE AS
5.	127-9580	[7]	ROD
6.	128-8537	[2]	LATCH-LOCK
7.	202-7202	[2]	LAMP (24-VOLT, 10-WATT)(LICENSE PLATE)
8.	205-6308	[1]	BRACKET
9.	207-4105	[1]	BRACKET AS
10.	207-4699	[2]	LAMP AS (REAR)
11.	207-5466	[1]	HARNESS AS-LIGHTING (LICENSE PLATE)
	102-8802		KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	096-0061 B	[10]	STRAP-CABLE
13.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
14.	5C-8312 M	[4]	NUT (M4X0.7-THD)
15.	7X-7729	[2]	WASHER (11X25X3-MM THK)
16.	8T-3998 M	[4]	BOLT (M4X0.7X12-MM)
17.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
18.	9X-6032 M	[2]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP42230006

223-5781: ROADING AR

ROADING AR

223-5781 ROADING AR
S/N BDX2001-99999
UNITED KINGDOM
FOR USE WITH 1 PIECE BOOM
AN ATTACHMENT

i01901496 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
2.	240-1366 A	[1]	SWITCH AS-POSITION (TRAVEL LOCK)
3.	194-7843	[2]	MAGNET
4.	209-0208	[1]	PLATE
5.	209-0209	[1]	PLATE
6.	095-0723 M	[2]	SCREW-SPECIAL (M3X0.5X10-MM)
7.	096-5962	[2]	WASHER-HARD (3.4X7X0.8-MM THK)
8.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
	154-9095 F	[1]	FILM-IDENTIFICATION (ROADING HEIGHT)
			(LOCATE ON RH CAB WINDOW)
	3S-2093 BF	[1]	STRAP-CABLE
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP42230007

223-5782: ROADING AR

ROADING AR

223-5782 ROADING AR
S/N BDX2001-99999
UNITED KINGDOM
FOR USE WITH VARIABLE ADJUSTABLE BOOM
AN ATTACHMENT

i01782325 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	154-9096	[1]	FILM-IDENTIFICATION (ROADING HEIGHT)
			(LOCATE INSIDE CAB ON RH WINDOW)
2.	240-1366	[1]	SWITCH AS-POSITION (TRAVEL LOCK)
3.	194-7843	[1]	MAGNET
4.	223-5783	[1]	HARNESS AS-SWITCH (TRAVEL LOCK)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INLCUDES PLUG AS, WEDGE & INTERFACE SEAL)
5.	224-6218	[1]	PLATE
6.	224-6219	[1]	PLATE
7.	095-0723 M	[2]	SCREW-SPECIAL (M3X0.5X10-MM)
8.	096-5962	[4]	WASHER-HARD (3.4X7X0.8-MM THK)
9.	120-9027 M	[2]	SCREW-PAN HEAD (M3X0.5X16-MM)
10.	3C-6969 M	[2]	NUT (M3X0.5-THD)
11.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
12.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
	3S-2093 BF	[2]	STRAP-CABLE
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP42230008

227-2947: ROADING AR

ROADING AR

227-2947 ROADING AR -ITALIAN
S/N BDX2001-99999
FOR USE WITH VARIABLE ADJUSTMENT BOOM
AN ATTACHMENT

i02193602 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
256-0925 Y	[1]	LIGHTING GP-ROADING
		S/N BDX2001-99999
227-2946 Y	[1]	PLATE & FILM GP (ITALIAN)
Y		SEPARATE ILLUSTRATION

#SEBP42230009

243-2598: ROADING AR

ROADING AR

243-2598 ROADING AR
S/N BDX2001-99999
GERMANY
AN ATTACHMENT

i02140571 SEBP4223

For full view, you need register

Parts for your M316C WHEELED EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
188-4948 Y	[1]	LIGHTING GP-ROADING (STICK)
116-5478 Y	[2]	WEDGE GP-WHEEL
Y		SEPARATE ILLUSTRATION

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Operation and Maintenance Manual

Crushing Prevention and Cutting Prevention
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Tire Information
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Slope Operation
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Special Instruction

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Excavators{7605}
Installation of G610 Hardware for Cat^® Terrain for Excavators{7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Systems Operation

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Technical Analysis

M316C Wheeled Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
M316C Wheeled Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}

Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565}

Service Magazine

Parts Books are Available on CD for the Wheeled Excavators {0374}
2003/09/29

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/22

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog M316C :

198-4697 CONVERSION AR-MACHINE

243-4070 CONVERSION AR-MACHINE

Truck sale:

Caterpillar M316C
- wheel excavator
MILTON CAT

63,000

Caterpillar M316C, wheel excavator, Construction
- wheel excavator
MACALLISTER MACHINERY CO., INC

56,653

Caterpillar M316C, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT

39,660

Caterpillar M316C, skidder, Forestry equipment

39,270

Caterpillar M316C, Crawler Excavators, Construction