AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

145-3543 HEAD GP-PUMP S/N BDK2001-99999 PART OF 196-8429 PUMP GP-PISTON M322C WHEELED EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
HYDRAULIC GP
LINES GP-AUXILIARY

WHEELED EXCAVATOR M322C WHEELED EXCAVATOR BDK
 M322C Excavator BDK02001-UP (MACHINE) POWERED BY 3056E Engine SEBP4224 M322C BDK   (2002)

HYDRAULIC SYSTEM

PUMP GP
COUPLING GP-PUMP
134-9680 COUPLING GP-PUMP
145-3167 HEAD GP-PUMP
HEAD GP-PUMP
145-3543 HEAD GP-PUMP
HEAD GP-PUMP
254-2028 HEAD GP-PUMP
PUMP & MTG GP-HYDRAULIC FAN
188-4941 PUMP & MTG GP-HYDRAULIC FAN
PUMP & MTG GP-MAIN HYDRAULIC
249-3952 PUMP & MTG GP-MAIN HYDRAULIC
 

#SEBP42240310
 

145-3543: HEAD GP-PUMP

145-3543 HEAD GP-PUMP
S/N BDK2001-99999
PART OF 196-8429 PUMP GP-PISTON
i01168822 SEBP4224
1453543 HEAD GP-PUMP Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-7275 Y [2] VALVE GP-RELIEF (CROSSOVER)  
2. 177-7122 Y [1] VALVE GP-RELIEF (PUMP CONTROL)  
3. 117-7276 Y [1] VALVE GP-RELIEF (STEERING HIGH PRESSURE CUTOFF)  
4. 117-7278 [1] BUSHING  
5. 117-7279 [1] BUSHING (EXTERNAL)  
6. 117-7280 [1] BUSHING (INTERNAL)  
7. 8C-4365 M [4] BOLT (M14X2X80-MM)  
8. 5W-1250 [2] PIN  
9. 117-7282 [1] SEAL-O-RING  
10. 087-4772 [3] PLUG-O-RING  
11. 6V-8397 [2] SEAL-O-RING  
12. 112-4628 [2] SCREW (7/16-20X0.5-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42240311
 

254-2028: HEAD GP-PUMP

254-2028 HEAD GP-PUMP
S/N BDK2001-99999
PART OF 240-0143 PUMP GP-PISTON
i02198909 SEBP4224
2542028 HEAD GP-PUMP Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-4374 [1] BEARING-ROLLER  
2. 5I-4341 [2] DOWEL  
3. 8C-3338 [1] DOWEL  
4. 9S-8004 J [2] PLUG (9/16-18-THD)  
5. 087-4772 J [1] PLUG-O-RING  
6. 239-5723 [1] ORIFICE  
7. 123-5799 [1] SEAT  
8. 123-5798 [1] SEAT  
9. 228-9697 [1] PIN  
10. 9T-3930 [1] PLUG AS  
11. 3J-1907 [2] SEAL-O-RING  
12. 443-9882 [1] KIT-SEAL  
   
    AVAILABLE REPAIR KIT(S):
  443-9882 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP42240312
 

198-4654: HYDRAULIC AR-LOWER

198-4654 HYDRAULIC AR-LOWER
S/N BDK2001-99999
PART OF 186-0522 GENERAL AR
i02174683 SEBP4224
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  111-1897 Y [1] CYLINDER & MTG GP-AXLE LOCK  
  248-7037 Y [1] LINES GP-GREASE  
    S/N BDK2001-99999
  247-7275 Y [1] LINES GP-HYDRAULIC (BLADE, STEER, STABILIZER)(BLADE, STEER, TRAVEL)  
    S/N BDK2001-99999
  247-7276 Y [1] LINES GP-HYDRAULIC (BK, CREEPER SP, OSC AX, XMSN)(BK, CREEPER SP, OSC AX, TMSN)  
    S/N BDK2001-99999
  140-0955 Y [1] SWIVEL GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42240313
 

199-7633: HYDRAULIC AR-LOWER

199-7633 HYDRAULIC AR-LOWER -BLADE, STABILIZER
S/N BDK2001-99999
PART OF 235-1828 STABILIZER AR
FOR USE WITH BLADE FRONT SIDE ONLY, ONE OR TWO SETS OF OUTRIGGERS, COMBINATION FRONT BLADE/REAR BLADE OR BLADE/STABILIZER
CANNOT BE USED WITH BLADE REAR SIDE ONLY, SA-UNDERCARRIAGE
AN ATTACHMENT
i02072632 SEBP4224
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  233-8282 Y [1] LINES GP-HYDRAULIC (BLADE/STABILIZER, FRONT)  
  188-4954 Y [1] WIRING GP-UNDERCARRIAGE/SWIVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42240314
 

198-4652: HYDRAULIC AR-UPPER

198-4652 HYDRAULIC AR-UPPER
S/N BDK2001-99999
PART OF 186-0522 GENERAL AR
i02188408 SEBP4224
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  275-4912 Y [1] COUPLING GP-FLEXIBLE  
  187-7244 Y [1] LINES GP-FRONT  
  188-7608 Y [1] LINES GP-HYDRAULIC (BLADE, STABILIZER, TRAVEL)  
  188-7633 Y [1] LINES GP-HYDRAULIC FAN  
  239-4427 Y [1] LINES GP-PILOT (OPERATOR)  
    S/N BDK2001-99999
  239-4431 Y [1] LINES GP-PILOT (UPPER)  
    S/N BDK2001-99999
  239-4428 Y [1] LINES GP-PILOT (PLATFORM TRAVEL)  
    S/N BDK2001-99999
  255-8578 Y [1] LINES GP-PILOT (PLATFORM, BRAKE)  
    S/N BDK2001-99999
  188-7613 Y [1] LINES GP-PRESSURE TEST  
  188-7598 Y [1] LINES GP-PUMP  
  188-7593 Y [1] LINES GP-RETURN  
  188-7603 Y [1] LINES GP-STEERING  
  188-7588 Y [1] LINES GP-SWING MOTOR  
  188-4941 Y [1] PUMP & MTG GP-HYDRAULIC FAN  
  249-3952 Y [1] PUMP & MTG GP-MAIN HYDRAULIC  
    S/N BDK2001-99999
  186-0499 Y [1] PUMP & MTG GP-PILOT (BRAKE, STEERING)  
  198-4667 Y [1] TANK & MTG GP-HYDRAULIC  
  187-7368 Y [1] LINES GP-LOAD CONTROL VALVE  
  187-7209 Y [1] VALVE & MTG GP-MAIN CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42240315
 

185-3400: LINES GP-AUXILIARY HYDRAULIC

185-3400 LINES GP-AUXILIARY HYDRAULIC
S/N BDK2001-99999
1 PIECE
AN ATTACHMENT
i01612776 SEBP4224
1853400 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-8906 [12] CLAMP  
2. 187-5077 [12] CLAMP  
3. 199-0727 [1] TUBE AS  
4. 199-0730 [1] TUBE AS  
5. 210-4324 I [1] HOSE AS  
6. 210-4330 I [1] HOSE AS  
7. 095-0670 M [4] BOLT (M12X1.75X45-MM)  
8. 1P-3703 [1] SEAL-RECTANGULAR  
9. 5K-9090 [4] SEAL-O-RING  
10. 6V-0400 [2] FLANGE-HALF  
11. 6V-9833 [2] CAP  
12. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP42240316
 

185-3406: LINES GP-AUXILIARY HYDRAULIC

185-3406 LINES GP-AUXILIARY HYDRAULIC
S/N BDK2001-99999
VARIABLE ADJUSTMENT
AN ATTACHMENT
i01612777 SEBP4224
1853406 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-8906 [2] CLAMP  
2. 146-1571 [12] CLAMP  
3. 194-9413 [1] TUBE AS  
4. 198-1166 [1] PLATE  
5. 198-8007 [1] TUBE AS  
6. 203-2924 I [1] HOSE AS  
7. 218-0569 I [1] HOSE AS  
8. 113-2004 M [4] BOLT-SOCKET HEAD (M12X1.75X45-MM)  
9. 101-7398 M [12] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
10. 1P-3703 [1] SEAL-RECTANGULAR  
11. 5K-9090 [4] SEAL-O-RING  
12. 5P-7468 [10] CLIP (SLOT)  
13. 5P-7469 [10] CLIP (TAB)  
14. 5P-8444 [10] GROMMET (37-MM ID)  
15. 6V-0400 [2] FLANGE-HALF  
16. 6V-9833 [2] CAP  
17. 7X-7729 [10] WASHER (11X25X3-MM THK)  
18. 8T-4133 M [1] NUT (M10X1.5-THD)  
19. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
20. 8T-4195 M [10] BOLT (M10X1.5X30-MM)  
21. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 187-5077 [2] CLAMP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP42240317
 

185-3412: LINES GP-AUXILIARY HYDRAULIC

185-3412 LINES GP-AUXILIARY HYDRAULIC
S/N BDK2001-99999
1 PIECE-MEDIUM PRESSURE
AN ATTACHMENT
i01612778 SEBP4224
1853412 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-9324 [4] CLAMP-SINGLE  
2. 114-9325 [10] CLAMP-DOUBLE  
3. 179-9316 [2] PLATE AS  
4. 194-9387 [1] CLAMP AS (LOG)  
5. 195-7685 [10] ADAPTER  
6. 199-7038 [1] TUBE AS  
7. 199-7039 [1] TUBE AS  
8. 206-2382 [1] TUBE AS  
9. 206-2383 [1] TUBE AS  
10. 213-0178 I [2] HOSE AS  
11. 6V-8398 [6] SEAL-O-RING  
12. 6V-9830 [2] CAP (ORFS)  
13. 7X-2533 M [2] BOLT (M6X1X35-MM)  
14. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP42240318
 

185-3418: LINES GP-AUXILIARY HYDRAULIC

185-3418 LINES GP-AUXILIARY HYDRAULIC
S/N BDK2001-99999
VARIABLE ADJUSTMENT-MEDIUM PRESSURE
AN ATTACHMENT
i01612780 SEBP4224
1853418 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-9324 [2] CLAMP-SINGLE  
2. 114-9325 [6] CLAMP-DOUBLE  
3. 179-9316 [2] PLATE AS  
4. 187-5080 [1] PLATE AS  
5. 194-9387 [6] CLAMP AS (LOG)  
6. 194-9411 [1] TUBE AS  
7. 194-9412 [1] TUBE AS  
8. 195-7685 [6] ADAPTER  
9. 196-7937 I [2] HOSE AS  
10. 6V-8398 [4] SEAL-O-RING  
11. 6V-9830 [2] CAP (ORFS)  
12. 7X-2533 M [12] BOLT (M6X1X35-MM)  
13. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP42240319
 

185-3690: LINES GP-AUXILIARY HYDRAULIC

185-3690 LINES GP-AUXILIARY HYDRAULIC
S/N BDK2001-99999
HIGH PRESSURE
FOR USE WITH MATERIAL HANDLER BOOM
AN ATTACHMENT
i01844694 SEBP4224
1853690 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7398 M [16] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
2. 263-5618 [5] CLAMP AS (SINGLE)  
    (EACH INCLUDES)
  263-5132 [2] CLAMP  
  263-5133 [2] GROMMET  
3. 263-5619 [5] CLAMP AS (SINGLE)  
    (EACH INCLUDES)
  263-5132 [2] CLAMP  
  263-5134 [2] GROMMET  
4. 212-6759 [1] TUBE AS  
5. 247-6258 [1] TUBE AS  
6. 250-1653 I [1] HOSE AS  
7. 218-0560 I [1] HOSE AS  
8. 095-0670 M [4] BOLT (M12X1.75X45-MM)  
9. 101-7404 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
10. 1P-3703 [1] SEAL-RECTANGULAR  
11. 5K-9090 [4] SEAL-O-RING  
12. 6V-0400 [2] FLANGE-HALF  
13. 6V-9833 [2] CAP  
14. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 265-5391 [8] PLATE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Specifications
Swing Pump
M322C Wheeled Excavator Machine System
Gear Pump - Pilot, Brake, Steering, and Auxiliary Tool
M322C Wheeled Excavator Machine System
Main Hydraulic Pump
M322C Wheeled Excavator Machine System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Systems Operation
Pump Hydraulic System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Main Hydraulic Pump
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Solenoid Valve (Proportional Reducing)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Pump
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Pump Control (Swing)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Gear Pump (Charge)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Pump Control (Main Hydraulic) - M322C and M322C MH
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Hydraulic Cooler and Fan Drive Pump
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Swing Pump
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Pump Control (Swing)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Hydraulic Cooler and Fan Drive Pump
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Solenoid Valve (Proportional Reducing)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Pump Hydraulic System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Main Hydraulic Pump
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Pump Control (Main Hydraulic) - M322C and M322C MH
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Gear Pump (Charge)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PREVENTING OIL LEAKS FROM THE MEDIUM PRESSURE FUNCTION VALVE, HYDRAULIC CAB RISER VALVE, AND SWASHPLATE ANGLE SENSOR ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC TUBE ASSEMBLY ON THE MAIN PUMP OF CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
Testing and Adjusting
Swing Pump Control (Mechanical Zero) - Test and Adjust
M322C Excavator Hydraulic System
Swing Pump Control (High Pressure Cutoff) - Test and Adjust
M322C Excavator Hydraulic System
Swing Pump Control (Throttle Spool Piston) - Adjust
M322C Excavator Hydraulic System
Relief Valve (Steering) - Test and Adjust
M322C Excavator Hydraulic System
Main Pump (Destroke Pressure) - Test and Adjust
M322C Excavator Hydraulic System
Main Pump (Flow) - Test
M322C Excavator Hydraulic System
Main Hydraulic Pump Air - Purge
M322C Excavator Hydraulic System
Swing Pump Air - Purge
M322C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
M322C Excavator Hydraulic System
Margin Pressure and Low Pressure Standby - Test and Adjust
M322C Excavator Hydraulic System
Swing Pump Air - Purge
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Swing Speed and Overswing on Level Ground - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Margin Pressure - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Main Pump (Destroke Pressure) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Swing Pump Control (Throttle Spool Piston) - Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Swing Pump Control (Mechanical Zero) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Swing Pump Control (High Pressure Cutoff) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Relief Valve (Steering) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Main Pump (Flow) - Test
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Main Pump (Unloading Valve) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Troubleshooting
MID 039 - CID 1618 - FMI 00
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 1618 - FMI 01
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 1618 - FMI 03
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 1618 - FMI 04
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Disassembly and Assembly
Gear Pump (Fan Drive) - Assemble
M318C and M322C Excavators Machine Systems
Gear Pump (Fan Drive) - Disassemble
M318C and M322C Excavators Machine Systems
Gear Pump (Steering, Brake, and Pilot) - Remove
M318C and M322C Excavators Machine Systems
Gear Pump (Steering, Brake, and Pilot) - Install
M318C and M322C Excavators Machine Systems
Piston Pump (Swing) - Remove
M318C and M322C Excavators Machine Systems
Piston Pump (Swing) - Install
M318C and M322C Excavators Machine Systems
Piston Pump (Main Hydraulic) - Remove
M318C and M322C Excavators Machine Systems
Piston Pump (Main Hydraulic) - Install
M318C and M322C Excavators Machine Systems
Piston Pump (Main Hydraulic) - Disassemble
M318C and M322C Excavators Machine Systems
Piston Pump (Main Hydraulic) - Assemble
M318C and M322C Excavators Machine Systems
Piston Pump (Swing) - Disassemble
M318C and M322C Excavators Machine Systems
Piston Pump (Swing) - Assemble
M318C and M322C Excavators Machine Systems
Gear Pump (Steering, Brake, and Pilot) - Disassemble
M318C and M322C Excavators Machine Systems
Gear Pump (Steering, Brake, and Pilot) - Assemble
M318C and M322C Excavators Machine Systems
Gear Pump (Fan Drive) - Remove
M318C and M322C Excavators Machine Systems
Gear Pump (Fan Drive) - Install
M318C and M322C Excavators Machine Systems
Service Magazine
Correction to Testing and Adjusting , "Margin Pressure and Low Pressure Standby - Test and Adjust" {5070}
2003/04/21
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Improved Design of Gear Pump {5073}
2006/11/06
329-5736 Gear Pump Gp is Now Used as Service Replacement On Certain Models of M300C and M300D Wheeled Excavators {5085}
2009/06/22
Correction to Assembling the Main Hydraulic Pump Procedure in Disassembly and Assembly Manuals for Certain Wheeled Hydraulic Excavators {5070}
2010/09/03

Caterpillar Parts SIS Catalog M322C :

145-3167 HEAD GP-PUMP
HEAD GP-MOTOR
245-3661 HEAD GP-MOTOR
GAUGE GP-SIGHT
236-2428 GAUGE GP-SIGHT
GAUGE GP-SIGHT
227-0620 GAUGE GP-SIGHT
FITTING GP-HYDRAULIC
8U-0966 FITTING GP-HYDRAULIC
FITTING GP-HYDRAULIC
188-7655 FITTING GP-HYDRAULIC
FITTING GP-HYDRAULIC
176-6765 FITTING GP-HYDRAULIC
FITTING GP-HYDRAULIC
163-4210 FITTING GP-HYDRAULIC
HEAD GP-PUMP
254-2028 HEAD GP-PUMP
198-4654 HYDRAULIC AR-LOWER
199-7633 HYDRAULIC AR-LOWER
198-4652 HYDRAULIC AR-UPPER
LINES GP-AUXILIARY HYDRAULIC
185-3400 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
185-3406 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
185-3412 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
185-3418 LINES GP-AUXILIARY HYDRAULIC

Truck sale:

2005 CAT M322C
USD $50,526 
2005 CAT M322C

d&h concrete services ltd
2004 CAT M322C
USD $39,000 
2004 CAT M322C

MILTON CAT
SYRACUSE, New York
2006 CAT M322C
USD $59,000 
2006 CAT M322C

BTM MACHINERY
Georgia
CATERPILLAR M322C 2004
$39,000 USD 
CATERPILLAR M322C 2004
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
2004 CAT M322C
Call 
2004 CAT M322C

COFESER
Ponferrada, LEON, Spain 24400
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.