AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

M313C Excavator BDR02001-UP (MACHINE) POWERED BY 3054E Engine POWER TRAIN Caterpillar SIS



WHEELED EXCAVATOR M313C WHEELED EXCAVATOR BDR
 M313C Excavator BDR02001-UP (MACHINE) POWERED BY 3054E Engine SEBP4226 M313C BDR   (2002)

Parts group M313C:

  For full view, you need register
POWER TRAIN
AXLE GP
AXLE & MTG AR-FRONT
241-7431 AXLE & MTG AR-FRONT
241-7431 AXLE & MTG AR-FRONT
S/N BDR2001-99999
PART OF 212-6807 POWER TRAIN AR
AXLE & MTG AR-REAR
212-6824 AXLE & MTG AR-REAR
212-6824 AXLE & MTG AR-REAR
S/N BDR2001-99999
DISC BRAKE
AN ATTACHMENT
AXLE & MTG AR-REAR
241-7432 AXLE & MTG AR-REAR
241-7432 AXLE & MTG AR-REAR
S/N BDR2001-99999
PART OF 212-6807 POWER TRAIN AR
AXLE & TRANSMISSION AR
233-8735 AXLE & TRANSMISSION AR
233-8735 AXLE & TRANSMISSION AR
S/N BDR2001-99999
PART OF 212-6824 AXLE & MTG AR-REAR
AN ATTACHMENT
AXLE & TRANSMISSION AR
237-4515 AXLE & TRANSMISSION AR
237-4515 AXLE & TRANSMISSION AR
S/N BDR2001-99999
PART OF 241-7432 AXLE & MTG AR-REAR
AXLE GP-REAR
233-8736 AXLE GP-REAR
233-8736 AXLE GP-REAR
S/N BDR2001-99999
PART OF 233-8735 AXLE & TRANSMISSION AR
AN ATTACHMENT
AXLE GP-STEERING
237-4510 AXLE GP-STEERING
237-4510 AXLE GP-STEERING
S/N BDR2001-99999
PART OF 241-7431 AXLE & MTG AR-FRONT
POWER TRAIN AR
212-6807 POWER TRAIN AR
212-6807 POWER TRAIN AR
S/N BDR2001-99999
PART OF 186-0513 GENERAL AR
SHAFT GP
SHAFT GP-DRIVE
110-6135 SHAFT GP-DRIVE
110-6135 SHAFT GP-DRIVE -CARRIER BEARING
S/N BDR2001-99999
PART OF 228-3838 SHAFT GP-DRIVE
SHAFT GP-DRIVE
228-3838 SHAFT GP-DRIVE
228-3838 SHAFT GP-DRIVE
S/N BDR2001-99999
PART OF 212-6807 POWER TRAIN AR
UNIVERSAL JOINT GP
134-1376 UNIVERSAL JOINT GP
134-1376 UNIVERSAL JOINT GP
S/N BDR2001-99999
PART OF 228-3838 SHAFT GP-DRIVE
UNIVERSAL JOINT GP
237-4550 UNIVERSAL JOINT GP
237-4550 UNIVERSAL JOINT GP
S/N BDR2001-99999
PART OF 228-3838 SHAFT GP-DRIVE
UNIVERSAL JOINT GP
267-9150 UNIVERSAL JOINT GP
267-9150 UNIVERSAL JOINT GP
S/N BDR2001-99999
PART OF 237-4510 AXLE GP-STEERING
TRANSMISSION GP
AXLE & TRANSMISSION AR
233-8735 AXLE & TRANSMISSION AR
233-8735 AXLE & TRANSMISSION AR
S/N BDR2001-99999
PART OF 212-6824 AXLE & MTG AR-REAR
AN ATTACHMENT
AXLE & TRANSMISSION AR
237-4515 AXLE & TRANSMISSION AR
237-4515 AXLE & TRANSMISSION AR
S/N BDR2001-99999
PART OF 241-7432 AXLE & MTG AR-REAR
TRANSMISSION GP
233-8745 TRANSMISSION GP
233-8745 TRANSMISSION GP
S/N BDR2001-99999
PART OF 233-8735 AXLE & TRANSMISSION AR
AN ATTACHMENT
TRANSMISSION GP
237-4516 TRANSMISSION GP
237-4516 TRANSMISSION GP
S/N BDR2001-2058; BDR2062-2064; BDR2076-2076; BDR2081-2082; BDR2170-2170
PART OF 237-4515 AXLE & TRANSMISSION AR
TRANSMISSION GP
237-4516 TRANSMISSION GP
237-4516 TRANSMISSION GP
S/N BDR2059-2061; BDR2065-2075; BDR2077-2080; BDR2083-2169; BDR2171-99999
PART OF 237-4515 AXLE & TRANSMISSION AR
WEDGE GP-WHEEL
WEDGE GP-WHEEL
235-8319 WEDGE GP-WHEEL
235-8319 WEDGE GP-WHEEL
S/N BDR2001-99999
PART OF 243-2599 ROADING AR
AN ATTACHMENT
WHEEL GP
RING GP-TIRE
8U-6723 RING GP-TIRE
8U-6723 RING GP-TIRE
S/N BDR2001-99999
60-MM (2.4-IN) THK
FOR USE WITH DUAL TIRES
AN ATTACHMENT
RING GP-TIRE
8U-6725 RING GP-TIRE
8U-6725 RING GP-TIRE
S/N BDR2001-99999
68-MM (2.7-IN) THK
FOR USE WITH DUAL TIRES
AN ATTACHMENT
TIRE & RIM AR
111-1999 TIRE & RIM AR
111-1999 TIRE & RIM AR
S/N BDR2001-99999
10X20
AN ATTACHMENT
TIRE & RIM AR
111-2003 TIRE & RIM AR
111-2003 TIRE & RIM AR
S/N BDR2001-99999
10.00X20 SOLID
AN ATTACHMENT
TIRE & RIM AR
113-1866 TIRE & RIM AR
113-1866 TIRE & RIM AR
S/N BDR2001-99999
10.00X20
PART OF 212-6807 POWER TRAIN AR
TIRE & RIM AR
123-3879 TIRE & RIM AR
123-3879 TIRE & RIM AR
S/N BDR2001-99999
10.00X20
AN ATTACHMENT
TIRE & RIM AR
125-9671 TIRE & RIM AR
125-9671 TIRE & RIM AR
S/N BDR2001-99999
10.00X20
AN ATTACHMENT
TIRE & RIM AR
144-0685 TIRE & RIM AR
144-0685 TIRE & RIM AR
S/N BDR2001-99999
600/40-22.5. SUPER SINGLE
AN ATTACHMENT
TIRE & RIM AR
144-5174 TIRE & RIM AR
144-5174 TIRE & RIM AR
S/N BDR2001-99999
AN ATTACHMENT
TIRE & RIM AR
224-3190 TIRE & RIM AR
224-3190 TIRE & RIM AR
S/N BDR2001-99999
10.00X20
AN ATTACHMENT
TIRE & RIM AR
262-6190 TIRE & RIM AR
262-6190 TIRE & RIM AR
S/N BDR2001-99999
10.00 X 20
AN ATTACHMENT
TIRE & RIM AR
262-6195 TIRE & RIM AR
262-6195 TIRE & RIM AR
S/N BDR2001-99999
10.00 X 20
AN ATTACHMENT
TIRE & RIM AR
265-9250 TIRE & RIM AR
265-9250 TIRE & RIM AR
S/N BDR2001-99999
10.00 X 20
AN ATTACHMENT
TIRE & RIM AR
265-9255 TIRE & RIM AR
265-9255 TIRE & RIM AR
S/N BDR2001-99999
10.00 X 20
AN ATTACHMENT
TIRE & RIM GP
111-2004 TIRE & RIM GP
111-2004 TIRE & RIM GP
S/N BDR2001-99999
10 X 20
PART OF 113-1866 TIRE & RIM AR
TIRE & RIM GP
111-2007 TIRE & RIM GP
111-2007 TIRE & RIM GP
S/N BDR2001-99999
10X20
PART OF 111-1999 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
111-2009 TIRE & RIM GP
111-2009 TIRE & RIM GP
S/N BDR2001-99999
(18-R19.5)
PART OF 144-5174 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
111-2011 TIRE & RIM GP
111-2011 TIRE & RIM GP
S/N BDR2001-99999
(10X20)
PART OF 111-2003 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
124-2910 TIRE & RIM GP
124-2910 TIRE & RIM GP
S/N BDR2001-99999
(10X20)
PART OF 123-3879 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
125-9672 TIRE & RIM GP
125-9672 TIRE & RIM GP
S/N BDR2001-99999
(10X20)
PART OF 125-9671 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
144-0688 TIRE & RIM GP
144-0688 TIRE & RIM GP
S/N BDR2001-99999
600/40-22.5. SUPER SINGLE
PART OF 144-0685 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
219-9856 TIRE & RIM GP
219-9856 TIRE & RIM GP
S/N BDR2001-99999
(10X20)
PART OF 224-3190, 262-6195 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
224-6473 TIRE & RIM GP
224-6473 TIRE & RIM GP
S/N BDR2001-99999
(11X20)
PART OF 265-9255 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
262-6191 TIRE & RIM GP
262-6191 TIRE & RIM GP
S/N BDR2001-99999
(10X20)
PART OF 262-6190 TIRE & RIM AR
AN ATTACHMENT
TIRE & RIM GP
265-9251 TIRE & RIM GP
265-9251 TIRE & RIM GP
S/N BDR2001-99999
(10X20)
PART OF 265-9250 TIRE & RIM AR
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Systems Operation
Accumulator (Brake Control Valve)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Accumulator (Brake Control Valve)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Disassembly and Assembly
Accumulator (Brake) - Remove and Install
M313C Excavator Machine Systems
Operation and Maintenance Manual
Axle Bearings (Front) - Lubricate
M313C and M315C Excavators
Axle Oscillation Bearings - Lubricate
M313C and M315C Excavators
Axle Oil Level (Front) - Check
M313C and M315C Excavators
Wheel Nut Torque - Check
M313C and M315C Excavators
Axle Oil Level (Rear) - Check
M313C and M315C Excavators
Oscillating Axle Control
M313C and M315C Excavators
Axle Oil (Front) - Change
M313C and M315C Excavators
Axle Oil (Rear) - Change
M313C and M315C Excavators
Axle Oil Sample - Obtain - Front
M313C and M315C Excavators
Axle Oil Sample - Obtain - Rear
M313C and M315C Excavators
Axle Oil Level (Front) - Check
M313C and M315C Excavators
Axle Oil Level (Rear) - Check
M313C and M315C Excavators
Axle Oil Sample - Obtain
M313C and M315C Excavators
Axle Oil Sample - Obtain - Front
M313C and M315C Excavators
Axle Bearings (Front) - Lubricate
M313C and M315C Excavators
Axle Oscillation Bearings - Lubricate - If Equipped
M313C and M315C Excavators
Axle Oil (Front) - Change
M313C and M315C Excavators
Axle Oil (Rear) - Change
M313C and M315C Excavators
Wheel Nut Torque - Check
M313C and M315C Excavators
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE PINION ON CERTAIN M300C SERIES WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE PINION ON CERTAIN M300C SERIES WHEELED EXCAVATORS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
Service Letter-CFEL
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE PINION ON CERTAIN M300C SERIES WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE PINION ON CERTAIN M300C SERIES WHEELED EXCAVATORS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
Specifications
Axle (Front) - Mounting
M313C Wheeled Excavator Machine System
Axle (Rear)
M313C Wheeled Excavator Machine System
Axle (Front) - Mounting
M313C Wheeled Excavator Machine System
Axle (Rear)
M313C Wheeled Excavator Machine System
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
Service Letter-Asia
Systems Operation
Axle (Front and Rear)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Solenoid Valve (Oscillating Axle)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Oscillating Axle
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Transmission
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Transmission
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Oscillating Axle
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Solenoid Valve (Oscillating Axle)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Axle (Front and Rear)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
Testing and Adjusting
Axle (Steering Alignment) - Test and Adjust
M313C Excavator Hydraulic System
Axle (Steering Positive Stop) - Test and Adjust
M313C Excavator Hydraulic System
Brake Disc Wear - Measure
M313C Excavator Hydraulic System
Axle (Steering Alignment) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Axle (Steering Positive Stop) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Brake Disc Wear - Measure
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Disassembly and Assembly
Steering Cylinder - Remove
M313C Excavator Machine Systems
Steering Cylinder - Install
M313C Excavator Machine Systems
Final Drive Carriers, Hubs and Brakes - Assemble - Rear Axle
M313C Wheeled Excavator Power Train
Axle Housing - Remove - Front
M313C Wheeled Excavator Power Train
Axle Housing - Install - Front
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Disassemble - Front Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Disassemble - Rear Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Assemble - Front Axle
M313C Wheeled Excavator Power Train
Tie Rods - Remove
M313C Wheeled Excavator Power Train
Axle - Remove - Rear Axle
M313C Wheeled Excavator Power Train
Axle - Install - Rear Axle
M313C Wheeled Excavator Power Train
Axle - Remove - Front Axle
M313C Wheeled Excavator Power Train
Axle - Install - Front Axle
M313C Wheeled Excavator Power Train
Service Magazine
A New Seal Improves Durability {3282, 3282, 7555}
2003/12/29
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
The Axle Oil Change Interval and the Axle Oil Type are Corrected {3260, 3278, 7526, 7527, 7538, 7581}
2005/08/22
Correction to Operation and Maintenance Manual , "Lubricant Viscosities" {3260, 3278, 3282, 7581}
2006/04/24
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Operation and Maintenance Manual
Parking Brake Manual Release
M313C and M315C Excavators
Parking Brake Manual Release
M313C and M315C Excavators
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Testing and Adjusting
Transmission (Parking Brake Reserve Pressure) - Test and Adjust
M313C Excavator Hydraulic System
Disassembly and Assembly
Final Drive Carriers, Hubs and Brakes - Assemble - Rear Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Disassemble - Front Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Disassemble - Rear Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Assemble - Front Axle
M313C Wheeled Excavator Power Train
Reuse And Salvage Guidelines
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Systems Operation
Differentials
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Differentials
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Differential - Disassemble - Rear
M313C Wheeled Excavator Power Train
Differential - Assemble - Rear
M313C Wheeled Excavator Power Train
Differential - Disassemble - Front Axle
M313C Wheeled Excavator Power Train
Differential - Assemble - Front Axle
M313C Wheeled Excavator Power Train
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Optional High Efficiency Filters Are Now Available {3004, 5068}
2007/12/17
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Operation and Maintenance Manual
Drive Shaft - Lubricate
M313C and M315C Excavators
Specifications
Universal Joints
M313C Wheeled Excavator Machine System
Universal Joints
M313C Wheeled Excavator Machine System
Universal Joints
M313C Wheeled Excavator Machine System
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Disassembly and Assembly
Drive Shaft and Carrier Bearing - Install
M313C Wheeled Excavator Power Train
Drive Shaft and Carrier Bearing - Disassemble
M313C Wheeled Excavator Power Train
Drive Shaft and Carrier Bearing - Assemble
M313C Wheeled Excavator Power Train
Drive Shaft - Remove and Install
M313C Wheeled Excavator Power Train
Drive Shaft and Carrier Bearing - Remove
M313C Wheeled Excavator Power Train
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
123-6691 Measuring Screw Allows the Technician to Measure Disc Wear in the Transmission Brake {0720, 0722}
2005/04/04
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Operation and Maintenance Manual
Transmission Oil - Change
M313C and M315C Excavators
Transmission Oil Level - Check
M313C and M315C Excavators
Transmission Oil Sample - Obtain
M313C and M315C Excavators
Technical Information Bulletin
TRANSMISSION HOUSING OVERFILLS
TRANSMISSION HOUSING OVERFILLS
M300C WEX TRANSMISSION SHIFT PRESSURE EVENT CODE (127-3)
M300C WEX TRANSMISSION SHIFT PRESSURE EVENT CODE (127-3)
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Transmission Downshift Inhibitor
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Transmission
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Transmission
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Transmission (Shift Pressure) - Test
M313C Excavator Hydraulic System
Transmission (Shift Pressure) - Test
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Troubleshooting
MID 039 - CID 0191 - FMI 02
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
MID 039 - CID 0191 - FMI 11
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System
Disassembly and Assembly
Transmission - Disassemble
M313C Wheeled Excavator Power Train
Transmission - Assemble
M313C Wheeled Excavator Power Train
Transmission - Remove
M313C Wheeled Excavator Power Train
Transmission - Install
M313C Wheeled Excavator Power Train
Service Magazine
123-6691 Measuring Screw Allows the Technician to Measure Disc Wear in the Transmission Brake {0720, 0722}
2005/04/04
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Operation and Maintenance Manual
Transmission Oil Sample - Obtain
M313C and M315C Excavators
Final Drive Oil Sample - Obtain
M313C and M315C Excavators
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Specifications
Pilot Operated Hydraulic Control
M313C Wheeled Excavator Machine System
Pilot Operated Hydraulic Control
M313C Wheeled Excavator Machine System
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Operation and Maintenance Manual
Tire Inflation - Check - Pneumatic
M313C and M315C Excavators
Wheel Nut Torque - Check
M313C and M315C Excavators
Tire Installation
M313C and M315C Excavators
Tire Inflation Information
M313C and M315C Excavators
Tire Information
M313C and M315C Excavators
Wheel Nut Torque - Check
M313C and M315C Excavators
Special Instruction
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Wheel Group
M313C Wheeled Excavator Machine System
Wheel Group
M313C Wheeled Excavator Machine System
Wheel Group
M313C Wheeled Excavator Machine System
Wheel Group
M313C Wheeled Excavator Machine System
Wheel Group
M313C Wheeled Excavator Machine System
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Systems Operation
Service and Parking Brake
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Disassembly and Assembly
Tire and Rim - Remove - Type I
M313C Wheeled Excavator Power Train
Tire and Rim - Install - Type I
M313C Wheeled Excavator Power Train
Accumulator (Brake) - Remove and Install
M313C Excavator Machine Systems
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Final Drive Oil - Change
M313C and M315C Excavators
Final Drive Oil Level - Check
M313C and M315C Excavators
Final Drive Oil Sample - Obtain
M313C and M315C Excavators
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Final Drive Carriers, Hubs and Brakes - Assemble - Rear Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Disassemble - Front Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Disassemble - Rear Axle
M313C Wheeled Excavator Power Train
Final Drive Carriers, Hubs and Brakes - Assemble - Front Axle
M313C Wheeled Excavator Power Train
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Correction to Operation and Maintenance Manual , "Lubricant Viscosities" {3260, 3278, 3282, 7581}
2006/04/24
Managing the Life Cycles of Excavator Final Drives {4050}
2007/07/16
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Final Drive Motor Housings Are Available for Certain Excavators {4050}
2015/04/09

Truck sale:

Caterpillar M313C
 
Caterpillar M313C
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
30.070 
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
BERGERAT MONNOYEUR ROMANIA
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
 
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
CGT - COMPAGNIA GENERALE TRATTORI
Italy
 
 
Caterpillar M313C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M313C, Construction
37,500 
Caterpillar M313C, Construction
- wheel excavator
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.