311-6265 PUMP GP-FUEL INJECTION PART OF 303-2511 ENGINE AR-PRIMARY AN ATTACHMENT 302.5C MINI HYD EXCAVATOR

Part No	Qty	Parts name
195-8350	[1]	BEARING
195-8383	[4]	BOLT (M8X1.25X20-MM)
199-2205 M	[1]	BOLT AS
195-8352	[1]	KEY
311-6267	[1]	PUMP AS-FUEL INJECTION
311-6266	[1]	SHAFT-PUMP
199-2271 B	[2]	SHIM (0.2-MM THK)
199-2272 B	[1]	SHIM (0.3-MM THK)
199-2273 B	[1]	SHIM (0.4-MM THK)
199-2274 B	[1]	SHIM (0.5-MM THK)
199-2275 B	[1]	SHIM (0.6-MM THK)
199-2276 B	[1]	SHIM (0.7-MM THK)
199-2277 B	[1]	SHIM (0.8-MM THK)
199-2278 B	[1]	SHIM (0.9-MM THK)
199-2279 B	[1]	SHIM (1.0-MM THK)
195-8347	[1]	WASHER (8.5X18X2.3-MM THK)
B		USE AS REQUIRED
M		METRIC PART

#SEBP42300061

239-8552: TANK & MTG GP-FUEL

TANK & MTG GP-FUEL

239-8552 TANK & MTG GP-FUEL
PART OF 238-6827, 243-0254 CHASSIS AR
ALSO AN ATTACHMENT

i02349064 SEBP4230

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5895	[1]	SCREEN (FUEL FILLER)
2.	212-4344	[1]	CAP AS-FILLER (FUEL)
3.	249-8568	[1]	STRAP AS
4.	250-1036 Y	[1]	TANK GP-FUEL
5.	260-3632	[1]	FILLER AS
6.	260-5173	[1]	HOSE
7.	127-2170 M	[3]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
8.	5C-7261 M	[2]	NUT (M8X1.25-THD)
9.	5D-1026	[1]	CLAMP-BAND
10.	9M-0164	[1]	CLAMP-HOSE
11.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
12.	9M-7959	[1]	CLAMP-HOSE
13.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
14.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42300062

250-1036: TANK GP-FUEL

TANK GP-FUEL

250-1036 TANK GP-FUEL
PART OF 239-8552 TANK & MTG GP-FUEL
ALSO AN ATTACHMENT

i02352010 SEBP4230

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	216-0906	[1]	PLUG AS (FUEL TANK DRAIN)
	3J-1907	[1]	SEAL-O-RING
2.	242-3794	[1]	TANK AS-FUEL
3.	249-8574	[1]	SENDER GP-FUEL LEVEL
4.	289-9139	[1]	CLAMP-BAND
5.	283-4157	[1]	HOSE

#SEBP42300063

260-5176: ALARM GP-TRAVEL

ALARM GP-TRAVEL

260-5176 ALARM GP-TRAVEL
PART OF 370-0351, 370-0353 DISTRIBUTION AR
AN ATTACHMENT

i02348235 SEBP4230

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[4]	STRAP-CABLE
2.	124-7272	[2]	SWITCH AS-BALL (TRAVEL ALARM)
			(EACH INCLUDES)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8812	[1]	SEAL
3.	170-0950	[1]	ALARM AS
	4B-2043	[2]	NUT (8-32-THD)
4.	260-5177	[1]	HARNESS AS-ALARM
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
5.	5W-9495 B	[4]	WASHER (20X28X1-MM THK)
6.	5C-2890 M	[2]	NUT (M6X1-THD)
7.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
8.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
9.	140-3295 B	[4]	SHIM (0.5-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP42300064

199-2358: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

199-2358 ALTERNATOR GP-CHARGING
PART OF 272-0467 ALTERNATOR GP-CHARGING
AN ATTACHMENT

i02359989 SEBP4230

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
196-8392	[1]	SET-BOLT
199-2359	[1]	NUT (M18X1.5-THD)
199-2360	[1]	PULLEY AS
199-2361	[1]	BRACKET AS
199-2362	[1]	REGULATOR SET
199-2364	[1]	RECTIFIER AS
199-2365	[1]	NUT SET
199-2366	[1]	BRACKET AS
199-2367	[1]	SCREW
199-2368	[1]	BEARING
199-2369	[1]	ROTOR AS
196-8400	[1]	BEARING
199-2371	[1]	STATOR AS

#SEBP42300065

249-5464: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

249-5464 ALTERNATOR GP-CHARGING
PART OF 242-9635 CAB AR
AN ATTACHMENT

i02349119 SEBP4230

2495464 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-9465	[1]	SPACER (11.1X14.3X20-MM THK)
2.	133-3260	[1]	SPACER (11X19X10-MM THK)
3.	144-9963	[1]	ALTERNATOR GP-CHARGING
4.	249-5461	[1]	BRACKET
5.	249-5462	[1]	BRACKET AS
6.	249-5463	[1]	V-BELT (ALTERNATOR)
7.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
8.	7X-2543 M	[1]	BOLT (M10X1.5X120-MM)
9.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4133 M	[2]	NUT (M10X1.5-THD)
11.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
12.	8T-4908 M	[1]	BOLT (M8X1.25X25-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	8T-6870 M	[1]	BOLT (M8X1.25X70-MM)
15.	8T-7547 M	[1]	BOLT (M8X1.25X30-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42300066

272-0467: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

272-0467 ALTERNATOR GP-CHARGING
PART OF 243-7064, 303-2511 ENGINE AR-PRIMARY
AN ATTACHMENT

i02352182 SEBP4230

2720467 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	195-8240 M	[1]	NUT (M10X1.25-THD)
2.	7X-0796	[1]	LOCKWASHER (10.2X18.4X2.5-MM THK)
3.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
4.	139-8105	[1]	BOLT
5.	199-2358 Y	[1]	ALTERNATOR GP-CHARGING
6.	199-2372	[1]	PLATE
7.	199-2374	[1]	WASHER (10.5X22X1.6-MM THK)
8.	199-2375	[1]	BOLT (M10X1.25X64-MM)
9.	220-6406	[1]	V-BELT (ENGINE COOLING FAN)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42300067

241-3755: BATTERY & WIRING GP

BATTERY & WIRING GP

241-3755 BATTERY & WIRING GP
PART OF 238-6827 CHASSIS AR, 242-9696 ELECTRICAL AR
ALSO AN ATTACHMENT

i02349061 SEBP4230

2413755 BATTERY & WIRING GP Parts scheme

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-9362	[2]	RELAY AS (12-VOLT)(MAIN)
2.	3S-2093	[8]	STRAP-CABLE
3.	7K-1181	[15]	STRAP-CABLE
4.	8T-8737 B	[2]	PLUG-SEAL
5.	113-8490	[4]	FUSE (10-AMPERE)
6.	113-8491	[3]	FUSE (15-AMPERE)
7.	113-8492	[1]	FUSE (20-AMPERE)
8.	116-7471	[1]	PULLER-MINIFUSE
9.	131-3798	[1]	BASE
10.	140-9378	[1]	RELAY AS (12-VOLT)(FUEL PUMP)
10A.	140-9378	[1]	RELAY AS (12-VOLT)(ENGINE SHUTOFF)
10B.	140-9378	[1]	RELAY AS (12-VOLT)(HORN)
10C.	140-9378	[1]	RELAY AS (12-VOLT)(ENGINE START)
10D.	140-9378	[1]	RELAY AS (12-VOLT)(SPEED SELECT)
10E.	140-9378	[1]	RELAY AS (12-VOLT)(START DISABLE)
11.	141-2759	[3]	FUSE (5-AMPERE)
12.	369-9957	[1]	BATTERY (12-VOLT)(MAINTENANCE FREE)
13.	164-9425	[1]	HORN AS (12-VOLT, LOW TONE)
14.	232-6313	[1]	FUSE (40-AMPERE)
15.	394-0936	[1]	STRAP AS
16.	232-7405	[1]	BRACKET
17.	284-7616	[1]	HARNESS AS-CHASSIS
	124-9636	[1]	BLOCK-MINIFUSE
	225-4950	[2]	HOLDER AS-FUSE
	111-6795	[2]	HOUSING-RELAY
	124-9637	[1]	LOCK-MINIFUSE
	111-6816	[2]	LOCK
	213-0139	[5]	PIN (4-MM)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
	177-9656	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	167-3693	[1]	PLUG AS-CONNECTOR (31-PIN)
	8T-8737	[13]	PLUG-SEAL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	225-4958	[1]	RELAY (12-VOLT)
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[43]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	234-3418	[2]	TERMINAL
	3T-4688	[1]	TERMINAL-RING (4-GA, 7/16-IN SCREW)
	128-4170	[1]	TERMINAL AS
	6H-3587	[1]	TERMINAL-RING (6-GA TO 8-GA, 3/8-IN SCREW)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8079	[4]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	091-2436	[2]	TERMINAL-BLADE (18-GA TO 22-GA)
	116-4160	[4]	TERMINAL-BLADE (12-GA TO 14-GA)
	116-4161	[11]	TERMINAL-BLADE (16-GA TO 18-GA)
	130-4578	[4]	TERMINAL-BLADE
	127-5460	[1]	TERMINAL-BUS
	111-6792	[4]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
18.	243-1524	[1]	CABLE AS-BATTERY (POSITIVE)
	3S-2093	[1]	STRAP-CABLE
	3T-4688	[1]	TERMINAL-RING (4-GA, 7/16-IN SCREW)
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	6V-2369 D		CABLE (4-GA, BLACK)(1.4-M)
	8T-8799	[2]	BOOT (RED)(RED)
	8Y-8081 E		TUBE-CONVOLUTED (151-CM)
	173-3161	[1]	TERMINAL
	169-0452	[1]	BOLT (3/8-16X1.1-IN)
	169-0453	[1]	COVER (RED)
	197-3800 E		LOOM (137-CM)
19.	243-1526	[1]	CABLE AS-BATTERY (NEGATIVE)
	5P-5988 D		LOOM (0.3-M)
		[1]	CHANNEL (BATTERY)
20.	248-7959	[1]	STUD-TERMINAL
21.	155-2270 B	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
22.	170-5632 M	[3]	BOLT (M4X0.7X16-MM)
23.	4B-4863	[8]	WASHER (4.7X11X1.2-MM THK)
24.	4P-7581	[2]	CLIP (LADDER)
25.	5C-7261 M	[1]	NUT (M8X1.25-THD)
26.	5C-8312 M	[2]	NUT (M4X0.7-THD)
27.	6V-8801	[2]	NUT (3/8-16-THD)
28.	6V-9672 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
29.	8D-1470	[1]	GROMMET
30.	8T-0285 M	[5]	SCREW-MACHINE (M4X0.7X12-MM)
31.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4133 M	[2]	NUT (M10X1.5-THD)
33.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
34.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
35.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
36.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
37.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
38.	8T-8799	[1]	BOOT (RED)(RED)
39.	103-2543 E		SEAL (3-CM)
40.	160-2252 G		SLEEVE-ABRASION (16-IN)
41.	275-3917	[1]	FILM (PROTECTION)
42.	265-8025	[1]	RELAY AS (12-VOLT)(STARTING AID)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

#SEBP42300068

242-9696: ELECTRICAL AR

ELECTRICAL AR

242-9696 ELECTRICAL AR
AN ATTACHMENT

i02505304 SEBP4230

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
241-3755 Y	[1]	BATTERY & WIRING GP (CENTER)
154-2652 Y	[1]	LIGHTING GP-FLOOD
241-3770 Y	[1]	WIRING GP-AUXILIARY (SWING BOOM, WORK TOOL)
241-3723 Y	[1]	WIRING GP-LIGHTING (CAB)
241-3769 Y	[1]	WIRING GP-CONSOLE (VEHICLE)
260-3606 Y	[1]	WIRING GP-CAB (RH)
239-8554 Y	[1]	WIRING GP-ENGINE (WITHOUT AIR CONDITIONER)
Y		SEPARATE ILLUSTRATION

#SEBP42300069

199-2124: GLOW PLUG GP

GLOW PLUG GP

199-2124 GLOW PLUG GP
PART OF 243-7064, 254-4228, 303-2511 ENGINE AR-PRIMARY
AN ATTACHMENT

i02351940 SEBP4230

For full view, you need register

Parts for your 302.5C MINI HYD EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	199-2356	[3]	GLOW PLUG
2.	199-2357	[1]	PLATE

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Operation and Maintenance Manual

Engine Valve Lash - Check
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Reuse And Salvage Guidelines

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Service Magazine

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 302.5C :

199-2281 PUMP GP-FUEL INJECTION

199-2120 PUMP GP-FUEL INJECTION

311-6259 LINES GP-FUEL

265-7837 LINES GP-FUEL

240-3233 LINES GP-FUEL

267-4386 GOVERNOR GP

265-7838 GOVERNOR GP

239-8552 TANK & MTG GP-FUEL

250-1036 TANK GP-FUEL

260-5176 ALARM GP-TRAVEL

199-2358 ALTERNATOR GP-CHARGING

249-5464 ALTERNATOR GP-CHARGING

272-0467 ALTERNATOR GP-CHARGING

241-3755 BATTERY & WIRING GP

242-9696 ELECTRICAL AR

Truck sale:

Caterpillar 302.5C
- Crawler excavators
MICHIGAN CAT

On Request

Caterpillar 302.5C, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Belgium

On Request

Caterpillar 302.5C, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Belgium

On Request

Caterpillar 302.5C, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Belgium

CATERPILLAR 302.5C 2010
- TRACK EXCAVATORS
BATTLEFIELD EQUIPMENT
Used Compact Construction Equipment Team:</br>1-866-606-1372