ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
#SEBP42340220
230-2183: ALTERNATOR GP-CHARGING
230-2183 ALTERNATOR GP-CHARGING
S/N DBC508-UP
PART OF 222-0802, 325-3266, 384-8904 ACCESSORY GP-ENGINE
S/N DBC508-UP
PART OF 222-0802, 325-3266, 384-8904 ACCESSORY GP-ENGINE
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 235-7133 CY | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 2. | 237-5688 | [1] | PULLEY (8-GROOVE) | |
| 3. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 4. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340221
235-7133: ALTERNATOR GP-CHARGING
235-7133 ALTERNATOR GP-CHARGING
S/N DBC508-UP
24-VOLT, 80-AMPERE
PART OF 230-2183 ALTERNATOR GP-CHARGING
S/N DBC508-UP
24-VOLT, 80-AMPERE
PART OF 230-2183 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-9656 | [1] | FRAME AS-DRIVE END | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 228-9655 | [1] | FRAME AS-ALTERNATOR | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 423-2775 | [1] | STATOR AS (24-VOLT, 95-AMPERE) | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES 3 BEARINGS) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLTS) | ||||
| 199-7891 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET,& NUT) | ||||
#SEBP42340222
341-8144: ALTERNATOR GP-CHARGING
341-8144 ALTERNATOR GP-CHARGING
S/N DBC507-525
PART OF 325-3266 ACCESSORY GP-ENGINE
S/N DBC507-525
PART OF 325-3266 ACCESSORY GP-ENGINE
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 200-2232 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 75-AMPERE) | |
| 2. | 237-5688 | [1] | PULLEY (8-GROOVE) | |
| 3. | 254-7065 | [1] | WIRE AS | |
| 4. | 4M-6425 | [1] | BOLT (5/16-18X1-IN) | |
| 5. | 5P-9297 | [1] | CLIP (LOOP) | |
| 8. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 9. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
| 11. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 13. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340223
228-6831: BATTERY & WIRING GP
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-4177 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(46-CM) | |||
| 2. | 2G-8767 | [4] | WASHER (10.5X60X3-MM THK) | |
| 3. | 3S-2093 | [36] | STRAP-CABLE | |
| 4. | 5T-3907 | [4] | CLAMP | |
| 5. | 6G-2256 | [2] | CLAMP | |
| 6. | 6G-2263 | [2] | SPACER (10.5X19X28.5-MM THK) | |
| 7. | 7T-0266 | [2] | BRACKET AS | |
| 8. | 8W-0301 | [2] | FLANGE | |
| 9. | 8W-8460 | [6] | GUARD | |
| 10. | 9G-2758 | [1] | LOCKOUT-SWITCH (BATTERY DISCONNECT) | |
| 11. | 228-6903 | [1] | CABLE AS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0761 E | CABLE (00-GA, RED)(235-CM) | |||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 12. | 228-6971 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0761 E | CABLE (00-GA, RED)(130-CM) | |||
| 9S-5754 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7T-4924 | [1] | COVER-TERMINAL (RED) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 13. | 230-6368 | [4] | BATTERY (12-VOLT) | |
| 14. | 237-7602 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 15. | 239-6895 | [2] | CABLE AS | |
| (EACH INCLUDES) | ||||
| 5P-0761 E | CABLE (00-GA, RED)(31-CM) | |||
| 9G-0002 | [1] | COVER AS-TERMINAL (RED) | ||
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH TERMINAL ASSEMBLY INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 16. | 239-7250 | [1] | HOLD-DOWN AS (BATTERY) | |
| 17. | 240-0676 | [1] | CABLE AS | |
| 7T-4925 | [1] | COVER-TERMINAL (BLACK) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(149-CM) | |||
| 9S-5755 | [1] | TERMINAL AS (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 18. | 272-6675 | [4] | ROD | |
| 19. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 20. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 21. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 22. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 23. | 6D-4636 | [6] | CLIP (LOOP)(25-CM) | |
| 24. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 25. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 26. | 7X-0611 | [1] | WASHER-HARD (20X32X3-MM THK) | |
| 27. | 8M-1047 | [2] | STUD-TAPERLOCK (3/8-16X1.67-IN) | |
| 28. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 29. | 8T-4223 | [7] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 31. | 8T-9371 | [4] | BOLT (3/8-16X0.5-IN) | |
| 32. | 8T-9377 | [2] | BOLT (3/8-16X2.25-IN) | |
| 33. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| 34. | 9M-8406 | [2] | CLIP (LOOP) | |
| 35. | 9X-0941 | [4] | LOCKNUT (1/2-13-THD) | |
| 36. | 2V-1771 | [1] | GROMMET | |
| 37. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340224
228-6831: BATTERY & WIRING GP
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-4177 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(46-CM) | |||
| 2. | 2G-8767 C | [2] | WASHER (10.5X60X3-MM THK) | |
| 3. | 3S-2093 C | [35] | STRAP-CABLE | |
| 4. | 5T-3907 | [4] | CLAMP | |
| 5. | 6G-2256 C | [1] | CLAMP | |
| 6. | 6G-2263 C | [1] | SPACER (10.5X19X28.5-MM THK) | |
| 7. | 7T-0266 | [2] | BRACKET AS | |
| 8. | 8W-0301 | [2] | FLANGE | |
| 9. | 8W-8460 | [5] | GUARD | |
| 10. | 9G-2758 | [1] | LOCKOUT-SWITCH (BATTERY DISCONNECT) | |
| 11. | 153-2446 | [1] | BRACKET | |
| 12. | 178-3620 C | [2] | STRAP-DUAL CLAMP | |
| 13. | 230-6368 | [4] | BATTERY (12-VOLT) | |
| 14. | 237-7602 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 15. | 239-6895 | [2] | CABLE AS | |
| (EACH INCLUDES) | ||||
| 5P-0761 E | CABLE (00-GA, RED)(31-CM) | |||
| 9G-0002 | [1] | COVER AS-TERMINAL (RED) | ||
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH TERMINAL ASSEMBLY INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 16. | 239-7250 | [1] | HOLD-DOWN AS (BATTERY) | |
| 17. | 272-6675 | [4] | ROD | |
| 18. | 313-7401 C | [1] | CABLE AS (BATTERY POSITIVE) | |
| 7T-4924 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(170-CM) | |||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 19. | 313-7402 C | [1] | CABLE AS (BATTERY NEGATIVE) | |
| 7T-4925 | [1] | COVER-TERMINAL (BLACK) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 9S-5755 | [1] | TERMINAL AS (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(137-CM) | |||
| 20. | 313-7405 C | [1] | CABLE AS (STARTING MOTOR) | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 9X-9825 | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | |||
| 159-8049 E | CABLE (00-GA, RED)(266-CM) | |||
| 276-1786 | [1] | COVER-TERMINAL (RED) | ||
| 301-0091 | [1] | COVER-TERMINAL (RED) | ||
| 21. | 1S-0996 C | [1] | CLIP | |
| 22. | 2V-1771 C | [11] | GROMMET | |
| 23. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 24. | 5P-1075 C | [18] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 25. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 26. | 5S-7379 C | [5] | BOLT (3/8-16X0.875-IN) | |
| 27. | 6D-4246 C | [5] | CLIP (LOOP) | |
| 28. | 6D-4636 C | [4] | CLIP (LOOP)(25-CM) | |
| 29. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 30. | 6V-8801 C | [4] | NUT (3/8-16-THD) | |
| 31. | 7X-0291 C | [2] | BOLT (3/8-16X3.75-IN) | |
| 32. | 8M-1047 C | [3] | STUD-TAPERLOCK (3/8-16X1.67-IN) | |
| 33. | 8S-0948 C | [1] | CLIP | |
| 34. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| 35. | 8T-4123 C | [1] | WASHER (22X35X3.5-MM THK) | |
| 36. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 37. | 8T-4223 | [7] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 8T-9371 | [4] | BOLT (3/8-16X0.5-IN) | |
| 39. | 8T-9377 C | [1] | BOLT (3/8-16X2.25-IN) | |
| 40. | 9X-0941 | [4] | LOCKNUT (1/2-13-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340225
228-6878: BATTERY & WIRING GP
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 | [14] | STRAP-CABLE | |
| 3. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(CONVERTER, RETARDER) | |
| 3A. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC TANK OIL) | |
| 4. | 135-8659 | [1] | GUARD | |
| 5. | 139-2116 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 7. | 228-6824 Y | [1] | WIRING GP-ENGINE | |
| 8. | 228-6831 Y | [1] | BATTERY & WIRING GP | |
| 9. | 228-6983 Y | [1] | WIRING GP-POWER TRAIN | |
| 10. | 238-8665 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE AIR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 BE | SLEEVE | |||
| 11. | 244-2182 Y | [1] | WIRING GP-HITCH | |
| 12. | 246-0479 | [1] | HARNESS AS-FUEL TANK | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 13. | 263-7125 | [1] | HARNESS AS-CHASSIS | |
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 14. | 130-5300 | [7] | CLIP | |
| 15. | 1S-0994 | [1] | CLIP (LOOP) | |
| 16. | 3J-1907 | [2] | SEAL-O-RING | |
| 17. | 4D-7388 | [1] | CLIP (LOOP) | |
| 18. | 4K-8864 | [2] | CLIP (LOOP) | |
| 19. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 20. | 4P-7581 | [1] | CLIP (LADDER) | |
| 21. | 4P-8134 | [1] | CLIP (LADDER) | |
| 22. | 5K-5338 | [5] | CLIP (LOOP) | |
| 23. | 5M-3062 | [15] | BOLT (3/8-16X0.75-IN) | |
| 24. | 5N-2840 | [3] | CLIP | |
| 25. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 26. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 27. | 6D-4244 | [5] | CLIP (LOOP) | |
| 28. | 6D-4636 | [1] | CLIP (LOOP) | |
| 29. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 30. | 8M-2770 | [4] | CLIP (LOOP) | |
| 31. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 8T-9405 M | [4] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 33. | 6V-4589 | [1] | SEAL-O-RING | |
| 34. | 6V-5048 | [2] | SEAL-O-RING | |
| 35. | 108-5678 | [1] | UNION | |
| 36. | 194-6725 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 37. | 212-2768 Y | [1] | SWITCH GP-PRESSURE (DIFFERENTIAL) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340226
228-6878: BATTERY & WIRING GP
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 C | [13] | STRAP-CABLE | |
| 3. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(CONVERTER, RETARDER) | |
| 3A. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC TANK OIL) | |
| 4. | 135-8659 | [1] | GUARD | |
| 5. | 139-2116 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 6. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 7. | 169-5414 C | [1] | CLIP | |
| 8. | 228-6824 Y | [1] | WIRING GP-ENGINE | |
| 9. | 228-6831 Y | [1] | BATTERY & WIRING GP | |
| 10. | 228-6983 Y | [1] | WIRING GP-POWER TRAIN | |
| 11. | 238-8665 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE AIR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 12. | 244-2182 Y | [1] | WIRING GP-HITCH | |
| 13. | 246-0479 | [1] | HARNESS AS-FUEL TANK | |
| 114-8843 E | SLEEVE-PLASTIC (100-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 14. | 263-7125 | [1] | HARNESS AS-CHASSIS | |
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (40-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM) | |||
| 9X-0141 | [2] | PLUG AS-CONNECTOR (40-PIN) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 15. | 130-5300 C | [6] | CLIP | |
| 16. | 148-8313 C | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 5P-6944 | [1] | ADAPTER | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 17. | 3J-1907 | [2] | SEAL-O-RING | |
| 18. | 4D-7388 | [1] | CLIP (LOOP) | |
| 19. | 4K-8864 | [2] | CLIP (LOOP) | |
| 20. | 4L-6454 C | [6] | BOLT (3/8-16X1-IN) | |
| 21. | 4P-7581 | [1] | CLIP (LADDER) | |
| 22. | 2R-1939 | [6] | CLIP | |
| 23. | 5M-3062 C | [14] | BOLT (3/8-16X0.75-IN) | |
| 24. | 5P-7854 | [4] | CLIP | |
| 26. | 5S-7379 | [3] | BOLT (3/8-16X0.875-IN) | |
| 27. | 6D-4244 | [5] | CLIP (LOOP) | |
| 28. | 6D-4636 | [1] | CLIP (LOOP) | |
| 29. | 8M-2770 | [4] | CLIP (LOOP) | |
| 30. | 8M-2773 C | [1] | CLIP (LOOP) | |
| 31. | 8T-4896 C | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 8T-9405 M | [4] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 33. | 8W-3635 | [1] | PLATE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340227
228-6878: BATTERY & WIRING GP
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 4P-8221 C | [1] | BRACKET AS | |
| 9N-5550 | [1] | BRACKET | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(CONVERTER, RETARDER) | |
| 4A. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC TANK OIL) | |
| 5. | 135-8659 | [1] | GUARD | |
| 6. | 139-2116 Y | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 7. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 8. | 169-5414 | [1] | CLIP | |
| 9. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 10. | 193-3973 | [4] | STRAP-CABLE | |
| 11. | 200-6345 | [1] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 12. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 13. | 228-6824 Y | [1] | WIRING GP-ENGINE | |
| 14. | 228-6831 Y | [1] | BATTERY & WIRING GP | |
| 15. | 228-6983 Y | [1] | WIRING GP-POWER TRAIN | |
| 16. | 238-8665 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE AIR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 17. | 244-2182 Y | [1] | WIRING GP-HITCH | |
| 18. | 246-0479 | [1] | HARNESS AS-FUEL TANK | |
| 19. | 309-2491 C | [1] | HARNESS AS-CHASSIS | |
| 20. | 130-5300 C | [6] | CLIP | |
| 21. | 148-8313 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 5P-6944 | [1] | ADAPTER | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 22. | 3J-1907 | [2] | SEAL-O-RING | |
| 23. | 4D-7388 | [1] | CLIP (LOOP) | |
| 24. | 4K-8864 | [1] | CLIP (LOOP) | |
| 25. | 4L-6454 C | [5] | BOLT (3/8-16X1-IN) | |
| 26. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 27. | 4P-7581 | [2] | CLIP (LADDER) | |
| 28. | 4P-8134 C | [1] | CLIP (LADDER) | |
| 29. | 5M-3062 C | [10] | BOLT (3/8-16X0.75-IN) | |
| 30. | 5N-2840 | [1] | CLIP | |
| 31. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 32. | 5P-7854 | [2] | CLIP | |
| 33. | 5S-7379 C | [4] | BOLT (3/8-16X0.875-IN) | |
| 34. | 6D-4244 | [4] | CLIP (LOOP) | |
| 35. | 6D-4636 | [1] | CLIP (LOOP) | |
| 36. | 8M-2770 | [4] | CLIP (LOOP) | |
| 37. | 8M-2773 C | [3] | CLIP (LOOP) | |
| 38. | 8T-4896 C | [19] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 39. | 7K-1181 C | [14] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340228
228-6878: BATTERY & WIRING GP
228-6878 BATTERY & WIRING GP
S/N DBC509-522
PART OF 228-4565 CHASSIS AR, 313-7280 ELECTRICAL AR
S/N DBC509-522
PART OF 228-4565 CHASSIS AR, 313-7280 ELECTRICAL AR
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 C | [4] | STRAP-CABLE | |
| 3. | 4P-8221 | [1] | BRACKET AS | |
| 9N-5550 | [1] | BRACKET | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 7K-1181 C | [15] | STRAP-CABLE | |
| 5. | 9L-1566 C | [1] | SUPPORT | |
| 6. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(CONVERTER, RETARDER) | |
| 6A. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC TANK OIL) | |
| 7. | 135-8659 | [1] | GUARD | |
| 8. | 139-2116 Y | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 9. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 10. | 169-5414 | [1] | CLIP | |
| 11. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 12. | 178-3620 C | [1] | STRAP-DUAL CLAMP | |
| 13. | 193-3973 | [4] | STRAP-CABLE | |
| 14. | 200-6345 | [1] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 15. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 16. | 228-6824 Y | [1] | WIRING GP-ENGINE | |
| 17. | 228-6831 Y | [1] | BATTERY & WIRING GP | |
| 18. | 228-6983 Y | [1] | WIRING GP-POWER TRAIN | |
| 19. | 238-8665 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE AIR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 20. | 244-2182 Y | [1] | WIRING GP-HITCH | |
| 21. | 246-0479 | [1] | HARNESS AS-FUEL TANK | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (100-CM) | |||
| E | SLEEVE-PLASTIC (20-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 22. | 309-2491 | [1] | HARNESS AS-CHASSIS | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [142] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [30] | PLUG-SEAL | ||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-0141 | [2] | PLUG AS-CONNECTOR (40-PIN) | ||
| (EACH INCLUDES) | ||||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-5615 | [2] | SEAL (INTERFACE, 70-PIN) | ||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| E | SLEEVE-PLASTIC (40-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (40-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 23. | 130-5300 | [6] | CLIP | |
| 24. | 148-8313 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 5P-6944 | [1] | ADAPTER | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 25. | 3J-1907 | [2] | SEAL-O-RING | |
| 26. | 4D-7388 | [1] | CLIP (LOOP) | |
| 27. | 4K-8864 | [1] | CLIP (LOOP) | |
| 28. | 4L-6454 | [5] | BOLT (3/8-16X1-IN) | |
| 29. | 4L-6459 C | [1] | BOLT (3/8-16X2.5-IN) | |
| 30. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 31. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 4P-8134 C | [3] | CLIP (LADDER) | |
| 33. | 5M-3062 C | [7] | BOLT (3/8-16X0.75-IN) | |
| 34. | 5N-2840 | [1] | CLIP | |
| 35. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 36. | 5P-7854 | [2] | CLIP | |
| 37. | 5S-7379 C | [5] | BOLT (3/8-16X0.875-IN) | |
| 38. | 6D-4244 | [4] | CLIP (LOOP) | |
| 39. | 6D-4636 | [1] | CLIP (LOOP) | |
| 40. | 6V-8801 C | [1] | NUT (3/8-16-THD) | |
| 41. | 6W-6672 C | [1] | SPACER (10.5X20X38-MM THK) | |
| 42. | 8M-2770 C | [1] | CLIP (LOOP) | |
| 43. | 8M-2773 | [3] | CLIP (LOOP) | |
| 44. | 8T-4896 | [19] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42340229
228-6878: BATTERY & WIRING GP
For full view, you need register
Parts for your 623G WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [4] | STRAP-CABLE | |
| 3. | 4P-8221 | [1] | BRACKET AS | |
| 9N-5550 | [1] | BRACKET | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 7K-1181 C | [17] | STRAP-CABLE | |
| 5. | 9L-1566 | [1] | SUPPORT | |
| 6. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(CONVERTER, RETARDER) | |
| 6A. | 134-2252 Y | [1] | SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC TANK OIL) | |
| 7. | 135-8659 | [1] | GUARD | |
| 8. | 139-2116 Y | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 9. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 10. | 169-5414 | [1] | CLIP | |
| 11. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 12. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 13. | 193-3973 | [4] | STRAP-CABLE | |
| 14. | 200-6345 | [1] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 15. | 204-2281 C | [1] | STRAP-CABLE | |
| 16. | 204-8000 C | [3] | MOUNTING-CABLE TIE | |
| 17. | 228-6824 Y | [1] | WIRING GP-ENGINE | |
| 18. | 228-6831 Y | [1] | BATTERY & WIRING GP | |
| 19. | 228-6983 Y | [1] | WIRING GP-POWER TRAIN | |
| 20. | 238-8665 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE AIR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 21. | 244-2182 Y | [1] | WIRING GP-HITCH | |
| 22. | 309-2491 | [1] | HARNESS AS-CHASSIS | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [142] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [30] | PLUG-SEAL | ||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-0141 | [2] | PLUG AS-CONNECTOR (40-PIN) | ||
| (EACH INCLUDES) | ||||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-5615 | [2] | SEAL (INTERFACE, 70-PIN) | ||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| E | SLEEVE-PLASTIC (40-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (40-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 23. | 313-7491 C | [1] | HARNESS AS (FUEL) | |
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [18] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (100-CM) | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 24. | 130-5300 C | [5] | CLIP | |
| 25. | 148-8313 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 5P-6944 | [1] | ADAPTER | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 26. | 3J-1907 | [2] | SEAL-O-RING | |
| 27. | 4K-8864 | [1] | CLIP (LOOP) | |
| 28. | 4L-6454 | [5] | BOLT (3/8-16X1-IN) | |
| 29. | 4L-6459 | [1] | BOLT (3/8-16X2.5-IN) | |
| 30. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 31. | 4P-7581 C | [3] | CLIP (LADDER) | |
| 32. | 4P-8134 | [3] | CLIP (LADDER) | |
| 33. | 5M-3062 C | [8] | BOLT (3/8-16X0.75-IN) | |
| 34. | 5N-2840 | [1] | CLIP | |
| 35. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 36. | 5P-7854 | [2] | CLIP | |
| 37. | 5S-7379 C | [4] | BOLT (3/8-16X0.875-IN) | |
| 38. | 6D-4244 | [4] | CLIP (LOOP) | |
| 39. | 6D-4636 | [1] | CLIP (LOOP) | |
| 40. | 6V-8801 C | [2] | NUT (3/8-16-THD) | |
| 41. | 6W-6672 | [1] | SPACER (10.5X20X38-MM THK) | |
| 42. | 8M-2770 | [1] | CLIP (LOOP) | |
| 43. | 8M-2773 | [3] | CLIP (LOOP) | |
| 44. | 8T-2502 C | [1] | BOLT (3/8-16X1.125-IN) | |
| 45. | 8T-4896 C | [21] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
