AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

276-5681 CYLINDER GP-STEERING -RH S/N B9J1-1390 76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE PART OF 277-0688 CYLINDER & MTG GP-STEERING ALSO AN ATTACHMENT 14M


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

MOTOR GRADER 14M MOTOR GRADER B9J
 14M Motor Grader B9J00001-UP (MACHINE) POWERED BY C11 Engine SEBP4243 14M B9J   (2004)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
257-5083 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
509-6996 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
276-5681 CYLINDER GP-STEERING
CYLINDER GP-STEERING
276-5681 CYLINDER GP-STEERING
CYLINDER GP-STEERING
276-5682 CYLINDER GP-STEERING
CYLINDER GP-STEERING
276-5682 CYLINDER GP-STEERING
 

#SEBP42430860
 

276-5681: CYLINDER GP-STEERING

276-5681 CYLINDER GP-STEERING -RH
S/N B9J1-1390
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 277-0688 CYLINDER & MTG GP-STEERING
ALSO AN ATTACHMENT
i02567438 SEBP4243
2765681 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 151-7038 [1] HEAD  
5. 212-0907 [1] PLATE-CONNECTOR  
6. 214-6480 [1] PISTON  
7. 217-3311 [1] MAGNET (RING)  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 249-5193 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 262-5769 [1] ROD AS  
12. 276-1816 [1] GUARD  
13. 276-5683 [1] CYLINDER AS  
  095-0879 [1] PIN-SPRING  
  289-6002 [1] ELBOW AS  
  1N-5999 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
14. 289-2935 J [1] SEAL AS-BUFFER  
15. 188-2199 J [1] SEAL-O-RING  
16. 1H-7339 J [1] SEAL-O-RING  
17. 215-1942 J [1] RING-BACKUP  
18. 223-3353 J [1] RING-WEAR  
19. 289-2946 J [1] SEAL-U-CUP  
20. 308-1845 J [1] SEAL-WIPER  
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 J [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 J [1] SEAL AS  
26. 6J-5731 J [1] RING-BACKUP  
27. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
28. 9X-1386 E SLEEVE (8-CM)  
29. [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  241-6205 [1] PLUG  
   
    AVAILABLE REPAIR KIT(S):
  365-5556 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP42430861
 

276-5681: CYLINDER GP-STEERING

276-5681 CYLINDER GP-STEERING -RH
S/N B9J1391-1450
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 277-0688 CYLINDER & MTG GP-STEERING
i04045417 SEBP4243
2765681 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 151-7038 [1] HEAD  
5. 212-0907 [1] PLATE-CONNECTOR  
6. 214-6480 [1] PISTON  
7. 217-3311 [1] MAGNET (RING)  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 249-5193 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 262-5769 [1] ROD AS  
12. 276-1816 [1] GUARD  
13. 276-5683 [1] CYLINDER AS  
  095-0879 [1] PIN-SPRING  
  289-6002 [1] ELBOW AS  
  1N-5999 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
14. 289-2935 J [1] SEAL AS-BUFFER  
15. 188-2199 J [1] SEAL-O-RING  
16. 1H-7339 J [1] SEAL-O-RING  
17. 215-1942 J [1] RING-BACKUP  
18. 223-3353 J [1] RING-WEAR  
19. 289-2946 J [1] SEAL-U-CUP  
20. 308-1845 J [1] SEAL-WIPER  
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 J [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 J [1] SEAL AS  
26. 6J-5731 J [1] RING-BACKUP  
27. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
28. 9X-1386 E SLEEVE (8-CM)  
29. 162-0177 C [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  241-6205 [1] PLUG  
   
    AVAILABLE REPAIR KIT(S):
  365-5556 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP42430862
 

276-5682: CYLINDER GP-STEERING

276-5682 CYLINDER GP-STEERING -LH
S/N B9J1-1390
76.2-MM (3-IN) BORE X 287-MM STROKE (11.3-IN)
PART OF 277-0688 CYLINDER & MTG GP-STEERING
ALSO AN ATTACHMENT
i02567473 SEBP4243
2765682 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 151-7038 [1] HEAD  
5. 212-0907 [1] PLATE-CONNECTOR  
6. 214-6480 [1] PISTON  
7. 217-3311 [1] MAGNET (RING)  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 249-5193 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 262-5769 [1] ROD AS  
12. 276-1816 [1] GUARD  
13. 276-5684 [1] CYLINDER AS  
  095-0879 [1] PIN-SPRING  
  289-6002 [1] ELBOW AS  
  1N-5999 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
14. 289-2935 J [1] SEAL AS-BUFFER  
15. 188-2199 J [1] SEAL-O-RING  
16. 1H-7339 J [1] SEAL-O-RING  
17. 215-1942 J [1] RING-BACKUP  
18. 223-3353 J [1] RING-WEAR  
19. 289-2946 J [1] SEAL-U-CUP  
20. 308-1845 J [1] SEAL-WIPER  
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 J [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 J [1] SEAL AS  
26. 6J-5731 J [1] RING-BACKUP  
27. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
28. 9X-1386 E SLEEVE (6-CM)  
28A. 9X-1386 E SLEEVE (2-CM)  
29. [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  241-6205 [1] PLUG  
   
    AVAILABLE REPAIR KIT(S):
  365-5556 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP42430863
 

276-5682: CYLINDER GP-STEERING

276-5682 CYLINDER GP-STEERING -LH
S/N B9J1391-1450
76.2-MM (3-IN) BORE X 287-MM STROKE (11.3-IN)
PART OF 277-0688 CYLINDER & MTG GP-STEERING
i04045418 SEBP4243
2765682 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 151-7038 [1] HEAD  
5. 212-0907 [1] PLATE-CONNECTOR  
6. 214-6480 [1] PISTON  
7. 217-3311 [1] MAGNET (RING)  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 249-5193 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 262-5769 [1] ROD AS  
12. 276-1816 [1] GUARD  
13. 276-5684 [1] CYLINDER AS  
  095-0879 [1] PIN-SPRING  
  289-6002 [1] ELBOW AS  
  1N-5999 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
14. 289-2935 J [1] SEAL AS-BUFFER  
15. 188-2199 J [1] SEAL-O-RING  
16. 1H-7339 J [1] SEAL-O-RING  
17. 215-1942 J [1] RING-BACKUP  
18. 223-3353 J [1] RING-WEAR  
19. 289-2946 J [1] SEAL-U-CUP  
20. 308-1845 J [1] SEAL-WIPER  
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 J [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 J [1] SEAL AS  
26. 6J-5731 J [1] RING-BACKUP  
27. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
28. 9X-1386 E SLEEVE (6-CM)  
28A. 9X-1386 E SLEEVE (2-CM)  
29. 162-0177 C [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  365-5556 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP42430864
 

249-5299: CYLINDER GP-WHEEL LEAN

249-5299 CYLINDER GP-WHEEL LEAN
S/N B9J1-1450
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
ALSO AN ATTACHMENT
i02189514 SEBP4243
2495299 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-1550 [1] CYLINDER AS  
1A. 2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 1S-0669 J [1] RING (BACKUP)  
9. 6E-4974 [1] HEAD  
  308-1845 [1] SEAL-WIPER  
10. 121-9245 [1] ROD AS  
10A. 2G-8631 [1] BUSHING  
11. 308-1845 J [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 J [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP42430865
 

259-5580: DRIVE GP-CIRCLE

259-5580 DRIVE GP-CIRCLE
S/N B9J1-256; B9J1159-UP
PART OF 285-0106, 349-2555 COMMON AR
i02179482 SEBP4243
2595580 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
4. 2G-0339 [2] WASHER-SPECIAL  
5. 2G-0478 [8] PLATE-CLUTCH  
6. 2G-6695 [1] BRACKET  
7. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-5543 B [6] SHIM (0.13-MM THK)  
11. 6G-5544 B [11] SHIM (0.25-MM THK)  
12. 6G-5547 [1] PLATE  
13. 6G-6238 [1] COVER AS  
  6G-5537 [1] BEARING  
14. 6Y-7953 [9] DISC-FRICTION  
15. 7D-8983 B [10] SHIM (0.005-IN THK)  
16. 7D-8984 B [6] SHIM (0.007-IN THK)  
17. 8T-0336 [1] FITTING-PRESSURE RELIEF  
18. 8W-8146 [1] WORM-CIRCLE DRIVE  
19. 8X-5303 [1] GEAR-WORM (36-TEETH)  
20. 9D-1491 [1] COUPLING  
21. 9D-5943 [1] SPACER (1.906X3.19X0.236-IN)  
22. 9T-5977 Y [1] MOTOR GP-GEROTOR  
23. 259-4481 [1] HOUSING AS  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  281-9452 [1] BUSHING  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
24. 261-8554 [1] PINION-CIRCLE DRIVE  
25. 285-4256 [1] SHAFT  
26. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1H-7339 [1] SEAL-O-RING  
31. 2B-7410 [1] PLUG-PIPE  
32. 2D-6533 [1] SEAL-O-RING  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-7390 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5K-8454 [1] BOLT (1/2-13X1.12-IN)  
37. 5P-8245 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
39. 6G-5539 [1] GASKET  
40. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
41. 6G-6122 [1] SPRING-DISC  
42. 6H-1717 [7] BOLT (1/2-13X1.125-IN)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
47. 9D-5941 [2] WASHER-THRUST (3.06X4.25X0.120-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430866
 

259-5580: DRIVE GP-CIRCLE

259-5580 DRIVE GP-CIRCLE
S/N B9J257-1272
PART OF 285-0106, 349-2555 COMMON AR
i02896754 SEBP4243
2595580 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
4. 2G-0339 [2] WASHER-SPECIAL  
5. 2G-0478 [8] PLATE-CLUTCH  
6. 2G-6695 [1] BRACKET  
7. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6238 [1] COVER AS  
  6G-5537 [1] BEARING  
11. 6Y-7953 [9] DISC-FRICTION  
12. 7D-8983 BC [10] SHIM (0.005-IN THK)  
13. 7D-8984 BC [6] SHIM (0.007-IN THK)  
14. 8T-0336 [1] FITTING-PRESSURE RELIEF  
15. 312-0781 [1] WORM-CIRCLE DRIVE  
16. 8X-5303 [1] GEAR-WORM (36-TEETH)  
17. 9D-1491 [1] COUPLING  
18. 8D-7424 [1] SPACER (48X81X6-MM THK)  
19. 9T-5977 Y [1] MOTOR GP-GEROTOR  
20. 259-4481 [1] HOUSING AS  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  281-9452 [1] BUSHING  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8554 [1] PINION-CIRCLE DRIVE  
22. 281-9460 C [1] SHAFT-PINION DRIVE  
23. 307-1959 BC [6] SHIM (0.13-MM THK)  
24. 307-1960 BC [1] SHIM (0.25-MM THK)  
25. 307-1961 C [1] PLATE  
26. 307-1962 BC [5] SHIM (0.5-MM THK)  
27. 0S-1585 C [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1H-7339 [1] SEAL-O-RING  
31. 2B-7410 [1] PLUG-PIPE  
32. 2D-6533 [1] SEAL-O-RING  
33. 2H-9247 [1] SEAL-O-RING  
34. 6B-7021 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5K-8454 [1] BOLT (1/2-13X1.12-IN)  
37. 5P-8245 C [16] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
39. 6G-5539 [1] GASKET  
40. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
41. 6G-6122 [1] SPRING-DISC  
42. 6H-1717 [7] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 CM [3] BOLT (M16X2X50-MM)  
44. 8D-5054 C [3] WASHER-HARD (17X30X3-MM THK)  
45. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
46. 9D-5941 [2] WASHER-THRUST (3.06X4.25X0.120-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430867
 

250-3507: FILTER & MTG GP-HYDRAULIC

250-3507 FILTER & MTG GP-HYDRAULIC
S/N B9J1-1450
PART OF 289-2108 SERVICE CENTER AR
i02178358 SEBP4243
2503507 FILTER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8407 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
3. 242-0407 [1] VALVE AS-DRAIN (HYDRAULIC FILTER)  
4. 245-7603 [1] TUBE AS  
5. 245-8964 [1] BLOCK  
6. 249-2307 Y [1] FILTER GP-OIL (HYDRAULIC TANK RETURN)  
7. 257-8897 [1] HOSE-MOLDED  
8. [2] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
9. 156-4283 [1] CONNECTOR AS  
  8T-7926 [1] CONNECTOR  
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
10. 294-9701 [1] TUBE AS  
11. 294-9702 [1] TUBE AS  
12. 4J-0524 [2] SEAL-O-RING  
13. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [2] NUT (M10X1.5-THD)  
16. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
17. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
18. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 8T-6703 [4] CLAMP-HOSE  
20. 8X-5489 [1] SLEEVE  
21. 122-6908 G HOSE-HYDRAULIC (6.3-IN)  
22. 9X-2023 E HOSE (31-CM)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430868
 

191-9784: FILTER GP-OIL

191-9784 FILTER GP-OIL -STEERING LINES
S/N B9J1-1272
PART OF 235-6407, 282-8870, 351-8251 LINES GP-PUMP
ALSO AN ATTACHMENT
i01441603 SEBP4243
1919784 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
2. 7X-8549 [1] SWITCH AS-PRESSURE (FILTER BYPASS)  
  3J-1907 [1] SEAL-O-RING  
3. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
4. 183-7264 [1] VALVE AS-FLUID SAMPLING (FILTER OIL)  
4A. 3J-1907 SEAL-O-RING  
 

#SEBP42430869
 

249-2307: FILTER GP-OIL

249-2307 FILTER GP-OIL -HYDRAULIC TANK RETURN
S/N B9J1-287
INTERNAL BYPASS
PART OF 250-3507 FILTER & MTG GP-HYDRAULIC
i02178356 SEBP4243
2492307 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-1809 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC TANK)  
2. 241-3352 [1] HOUSING AS (OIL FILTER)  
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
3. 249-2308 Y [1] BASE GP-OIL FILTER (INTERNAL BYPASS)  
4. 3J-1907 [1] SEAL-O-RING  
5. 3J-7354 [1] SEAL-O-RING  
6. 9S-4182 [1] PLUG (7/16-20-THD)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 130-0229 [1] SEAL-O-RING  
9. 316-5366 B [1] RING-BACKUP  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Ripper Cylinder Bearings - Lubricate
14M Motor Grader
Steering Cylinder Ends and Tie Rods - Lubricate
14M Motor Grader
Blade Lift Cylinder Socket - Lubricate
14M Motor Grader
Centershift Cylinder Socket - Lubricate
14M Motor Grader
Wheel Lean Bearings - Lubricate
14M Motor Grader
Blade Lift Cylinder Socket - Check/Adjust/Replace
14M Motor Grader
Centershift Cylinder Socket - Check/Adjust/Replace
14M Motor Grader
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Technical Information Bulletin
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Specifications
Ripper Lift Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Blade Tip Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Centershift Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Sideshift Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Centershift Cylinder Mounting
14M and 16M Motor Graders Machine Systems
Blade Lift Cylinder Mounting
14M and 16M Motor Graders Machine Systems
Blade Lift Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Steering Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Steering Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Articulation Cylinder
14M and 16M Motor Graders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE ARTICULATION CYLINDER PIN JOINTS ON CERTAIN 14M MOTORGRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE TIP CYLINDER MOUNTING FLAG PIN ASSEMBLY AND RETAINER BOLT ON CERTAIN 14M AND 16M MOTOR GRADERS
Testing and Adjusting
Hydraulic Cylinder Drift - Check
14M and 16M Motor Graders Hydraulic and Steering System
Cylinder Cycle Time - Check
14M and 16M Motor Graders Hydraulic and Steering System
Steering System - Purge
14M and 16M Motor Graders Hydraulic and Steering System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Troubleshooting
MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Disassembly and Assembly
Ripper Lift Cylinder - Remove and Install
14M Motor Grader Machine Systems
Centershift Cylinder - Remove and Install
14M Motor Grader Machine Systems
Sideshift Cylinder - Remove and Install
14M Motor Grader Machine Systems
Blade Lift Cylinder - Remove and Install
14M Motor Grader Machine Systems
Blade Tip Cylinder - Remove and Install
14M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
14M Motor Grader Machine Systems
Wheel Lean Cylinder - Remove and Install
14M Motor Grader Machine Systems
Articulation Cylinder - Remove and Install
14M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
14M Motor Grader Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Procedure To Improve the Articulation Cylinder Pin Joint on Certain 14M Motor Graders {5265}
2011/04/27
The Pin Assembly of the Blade Tip Cylinder and Mounting Group Has Been Improved on Certain Motor Graders {5106}
2011/01/17
Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2013/06/04
Steering Cylinder Bearing Bore Specifications Have Been Updated on Certain Motor Graders {4303}
2011/12/23
Guards For The Steering Cylinders Have Been Improved on Certain 14M Motor Graders {4303, 7164}
2012/11/27
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21
<B>New Lift Cylinders With Improved Serviceability are Now Used On Certain 14M Motor Graders</B> {5102}
New Lift Cylinders With Improved Serviceability are Now Used On Certain 14M Motor Graders {5102}

Caterpillar Parts SIS Catalog 14M :

CYLINDER GP-SIDESHIFT
509-6996 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
257-5083 CYLINDER GP-SIDESHIFT
CYLINDER GP-RIPPER
113-5264 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
270-7536 CYLINDER GP-LIFT
CYLINDER GP-CENTERSHIFT
262-1906 CYLINDER GP-CENTERSHIFT
CYLINDER GP-BLADE TIP
9T-8944 CYLINDER GP-BLADE TIP
CYLINDER GP-ARTICULATION
303-9598 CYLINDER GP-ARTICULATION
CYLINDER & MTG GP-WHEEL LEAN
260-8713 CYLINDER & MTG GP-WHEEL LEAN
CYLINDER GP-STEERING
276-5681 CYLINDER GP-STEERING
CYLINDER GP-STEERING
276-5682 CYLINDER GP-STEERING
CYLINDER GP-STEERING
276-5682 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
DRIVE GP-CIRCLE
259-5580 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
259-5580 DRIVE GP-CIRCLE
FILTER & MTG GP-HYDRAULIC
250-3507 FILTER & MTG GP-HYDRAULIC
FILTER GP-OIL
191-9784 FILTER GP-OIL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.