AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

259-6923 VALVE GP-BANK 3 S/N B9J1-UP PART OF 248-4151 CONTROL AR-HYDRAULIC AN ATTACHMENT 14M MOTOR GRADER


HYDRAULIC SYSTEM
VALVE GP-BANK

MOTOR GRADER 14M MOTOR GRADER B9J
 14M Motor Grader B9J00001-UP (MACHINE) POWERED BY C11 Engine SEBP4243 14M B9J   (2004)

HYDRAULIC SYSTEM

VALVE GP-BANK
VALVE GP-BANK 1
308-0935 VALVE GP-BANK 1
VALVE GP-BANK 3
259-6923 VALVE GP-BANK 3
VALVE GP-BANK 3
382-4424 VALVE GP-BANK 3
VALVE GP-BANK 4
259-6924 VALVE GP-BANK 4
VALVE GP-BANK 4
382-4425 VALVE GP-BANK 4
 

#SEBP42430960
 

259-6923: VALVE GP-BANK 3

259-6923 VALVE GP-BANK 3
S/N B9J1-UP
PART OF 248-4151 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02302972 SEBP4243
2596923 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [4] SEAL-INTEGRAL  
3. 249-5636 M [4] STUD (M10X1.5X200-MM)  
4. 259-6912 Y [1] VALVE GP-CONTROL (ARTICULATION)  
5. 261-3268 Y [1] VALVE GP-CONTROL (BLADE LIFT, LH)  
5A. 261-3268 Y [1] VALVE GP-CONTROL (BLADE LIFT, RH)  
7. 273-1871 [1] COVER  
8. 292-2034 Y [1] MANIFOLD GP-VALVE (INLET)  
9. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
10. 148-8411 [6] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430961
 

382-4424: VALVE GP-BANK 3

382-4424 VALVE GP-BANK 3 -REAR
S/N B9J1-UP
PART OF 248-4151 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05858559 SEBP4243
3824424 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4133 M [4] NUT (M10X1.5-THD)  
2. 372-0918 [4] SEAL-INTEGRAL  
3. 249-5636 M [4] STUD (M10X1.5X200-MM)  
4. 382-3308 Y [1] VALVE GP-CONTROL (ARTICULATION)  
5. 382-3312 Y [1] VALVE GP-CONTROL (BLADE LIFT)(LH)  
5A. 382-3312 Y [1] VALVE GP-CONTROL (BLADE LIFT)(RH)  
6. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
7. 273-1871 [1] COVER  
8. 388-4281 Y [1] MANIFOLD GP-VALVE (INLET)  
9. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
10. 366-4700 [6] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430962
 

259-6924: VALVE GP-BANK 4

259-6924 VALVE GP-BANK 4 -REAR FRAME
S/N B9J1-UP
PART OF 252-4675, 252-4676, 262-6047, 290-8145, 351-2406, 351-2407, 391-4378, 391-4382, 432-6974 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02303499 SEBP4243
2596924 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [5] SEAL-INTEGRAL  
3. 248-6175 [4] ROD  
4. 259-6912 Y [1] VALVE GP-CONTROL (ARTICULATION)  
5. 259-6913 Y [1] VALVE GP-CONTROL (RIPPER)  
6. 261-3268 Y [1] VALVE GP-CONTROL (BLADE LIFT, LH)  
6A. 261-3268 Y [1] VALVE GP-CONTROL (BLADE LIFT, RH)  
8. 273-1871 [1] COVER  
9. 292-2034 Y [1] MANIFOLD GP-VALVE (INLET)  
10. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
11. 148-8411 [8] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430963
 

382-4425: VALVE GP-BANK 4

382-4425 VALVE GP-BANK 4 -REAR
S/N B9J1-UP
PART OF 252-4676, 391-4378, 391-4382, 432-6974 CONTROL AR-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@487-3034@@@@@
AN ATTACHMENT
i05811766 SEBP4243
3824425 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4133 M [4] NUT (M10X1.5-THD)  
2. 372-0918 [5] SEAL-INTEGRAL  
3. 248-6175 [4] ROD  
4. 382-3308 Y [1] VALVE GP-CONTROL (ARTICULATION)  
5. 382-3299 Y [1] VALVE GP-CONTROL (RIPPER)  
6. 382-3312 Y [1] VALVE GP-CONTROL (BLADE LIFT)(LH)  
6A. 382-3312 Y [1] VALVE GP-CONTROL (BLADE LIFT)(RH)  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 273-1871 [1] COVER  
9. 388-4281 Y [1] MANIFOLD GP-VALVE (INLET)  
10. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
11. 366-4700 [8] PLUG AS  
    (EACH INCLUDES)
  360-3693 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430964
 

487-3034: VALVE GP-BANK 4

487-3034 VALVE GP-BANK 4 -REAR
S/N B9J1-UP
FIELD REPLACEMENT FOR @@@@@382-4425@@@@@
i07433223 SEBP4243
4873034 VALVE GP-BANK 4 Parts scheme 4873034 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-3831 [1] ORIFICE  
2. 106-3659 [2] PISTON  
3. 106-3660 [4] PISTON  
4. 212-4961 [4] SPRING  
5. 242-9264 [4] PLUG-ORIFICE  
6. 243-2965 [4] SPOOL  
7. 244-2579 [4] PLUG  
8. 248-6175 [4] ROD  
9. 273-1871 [1] COVER  
10. 278-1799 Y [2] VALVE GP-SOLENOID (RIPPER)  
10A. 278-1799 Y [2] VALVE GP-SOLENOID (ARTICULATION)  
10B. 278-1799 Y [2] VALVE GP-SOLENOID (BLADE LIFT, LH)  
10C. 278-1799 Y [2] VALVE GP-SOLENOID (BLADE LIFT, RH)  
11. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
12. 2S-4663 [8] SEAL-O-RING  
13. 318-3040 H [1] VALVE GP-CHECK & RELIEF (RIPPER)  
14. 318-3052 H [1] VALVE GP-CHECK & RELIEF (BLADE LIFT, RH)  
14A. 318-3052 H [1] VALVE GP-CHECK & RELIEF (BLADE LIFT, LH)  
15. 318-3115 H [1] VALVE GP-CHECK (RIPPER)  
15A. 318-3115 H [1] VALVE GP-CHECK (BLADE LIFT, LH)  
15B. 318-3115 H [1] VALVE GP-CHECK (BLADE LIFT, RH)  
16. 321-6908 H [2] VALVE GP-CHECK (ARTICULATION)  
    (EACH VALVE GP-CHECK INCLUDES)
  6V-6580 H [1] SEAL-O-RING  
  9X-7745 H [1] SEAL-O-RING  
  471-6294 H [1] SEAL-O-RING  
17. 336-6718 [4] LOCKNUT-FLANGE  
18. 344-5675 M [4] NUT (M10X1.5-THD)  
19. 361-3059 L [1] VALVE GP-RELIEF (PILOT OPERATED)  
20. 366-4699 [3] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  360-3692 [1] PLUG  
21. 366-4700 [12] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
22. 367-6001 [4] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  360-3675 [1] PLUG (5/16-24-THD)  
23. 367-6002 [5] PLUG AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  360-3677 [1] PLUG (7/16-20-THD)  
24. 367-6003 [4] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
25. 370-8976 [4] COVER-SPRING  
26. 370-8979 [4] COVER-SPRING  
27. 372-0918 [3] SEAL-INTEGRAL  
28. 380-0794 [16] RETAINER  
29. 380-0819 [2] SPRING  
30. 380-0820 [2] SPRING  
31. 380-0821 [2] SPRING  
35. 382-5518 [1] MANIFOLD-INLET  
36. 3K-0360 [4] SEAL-O-RING  
37. 3T-0849 M [16] BOLT-SOCKET HEAD (M6X1X25-MM)  
41. 4J-7533 [4] SEAL-O-RING  
42. 5B-9318 [4] BALL  
43. 6E-3007 [4] SPRING  
44. 8T-0267 M [8] BOLT-SOCKET HEAD (M6X1X12-MM)  
45. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
   
  372-0918 AFJ [4] SEAL-INTEGRAL  
  382-3299 AFJY [1] VALVE GP-CONTROL (RIPPER)  
  382-3308 AFJY [1] VALVE GP-CONTROL (ARTICULATION)  
  488-7010 AFJY [1] VALVE GP-CONTROL (BLADE LIFT)  
   
    AVAILABLE REPAIR KIT(S):
  471-4231 H [1] KIT-SEAL (CHECK VALVE)  
  133-5545 L [1] KIT-SEAL (PILOT OPERATED)  
    (INCLUDES O-RING SEALS & BACKUP RINGS)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   REFER TO "FIELD REPLACEMENT REFERENCE" CHART ON GRAPHIC
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430965
 

259-6919: VALVE GP-BANK 5

259-6919 VALVE GP-BANK 5
S/N B9J1-UP
PART OF 248-4151, 252-4676, 290-8144, 432-6974 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02302928 SEBP4243
2596919 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [6] SEAL-INTEGRAL  
3. 248-6174 [4] ROD  
4. 259-6896 Y [1] VALVE GP-CONTROL (BLADE TIP)  
5. 259-6903 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
6. 259-6906 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 259-6907 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 259-6908 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
10. 273-1871 [1] COVER  
11. 292-2033 Y [1] MANIFOLD GP-VALVE (INLET)  
12. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
13. 148-8411 [10] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430966
 

382-4411: VALVE GP-BANK 5

382-4411 VALVE GP-BANK 5 -FRONT
S/N B9J1-UP
PART OF 248-4151, 252-4676, 432-6974 CONTROL AR-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@487-3020@@@@@
AN ATTACHMENT
i05400456 SEBP4243
3824411 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4133 M [4] NUT (M10X1.5-THD)  
2. 248-6174 [4] ROD  
3. 273-1871 [1] COVER  
4. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
5. 366-4700 [10] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
6. 372-0918 [6] SEAL-INTEGRAL  
7. 382-3301 Y [1] VALVE GP-CONTROL (BLADE TIP)  
8. 382-3302 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
9. 382-3304 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
10. 382-3305 Y [1] VALVE GP-CONTROL (WHEEL LEAN)(CENTERSHIFT)  
10A. 382-3305 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
12. 388-4280 Y [1] MANIFOLD GP-VALVE (INLET)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430967
 

487-3020: VALVE GP-BANK 5

487-3020 VALVE GP-BANK 5 -FRONT
S/N B9J1-UP
FIELD REPLACEMENT FOR 3824411
i07435020 SEBP4243
4873020 VALVE GP-BANK 5 Parts scheme 4873020 VALVE GP-BANK 5 Parts scheme 4873020 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 248-6174 [4] ROD  
2. 106-3659 [4] PISTON  
3. 212-4961 [5] SPRING  
4. 242-9264 [5] PLUG-ORIFICE  
5. 243-2965 [5] SPOOL  
6. 244-2579 [5] PLUG  
7. 273-1871 [1] COVER  
8. 278-1799 Y [2] VALVE GP-SOLENOID (WHEEL LEAN)  
8A. 278-1799 Y [2] VALVE GP-SOLENOID (CIRCLE DRIVE)  
8B. 278-1799 Y [2] VALVE GP-SOLENOID (CENTERSHIFT)  
8C. 278-1799 Y [2] VALVE GP-SOLENOID (SIDESHIFT)  
8D. 278-1799 Y [2] VALVE GP-SOLENOID (BLADE TIP)  
9. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
10. 2S-4663 [10] SEAL-O-RING  
11. 301-4568 [1] ORIFICE  
12. 318-3040 H [1] VALVE GP-CHECK & RELIEF (SIDESHIFT)  
12A. 318-3040 H [1] VALVE GP-CHECK & RELIEF (BLADE TIP)  
13. 318-3115 H [2] VALVE GP-CHECK (WHEEL LEAN)  
13A. 318-3115 H [1] VALVE GP-CHECK (BLADE TIP)  
13B. 318-3115 H [1] VALVE GP-CHECK (SIDESHIFT)  
13C. 318-3115 H [2] VALVE GP-CHECK (CENTERSHIFT)  
    (EACH VALVE GP-CHECK INCLUDES)
  6V-6580 H [1] SEAL-O-RING  
  9X-7745 H [1] SEAL-O-RING  
  471-6294 H [1] SEAL-O-RING  
14. 336-6718 [5] LOCKNUT-FLANGE  
15. 344-5675 M [4] NUT (M10X1.5-THD)  
16. 366-4699 [2] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  360-3692 [1] PLUG  
17. 366-4700 [14] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
18. 367-6001 [5] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  360-3675 [1] PLUG (5/16-24-THD)  
19. 367-6002 [5] PLUG AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  360-3677 [1] PLUG (7/16-20-THD)  
20. 367-6003 [4] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
21. 370-8976 [5] COVER-SPRING  
22. 370-8979 [5] COVER-SPRING  
24. 372-0918 [4] SEAL-INTEGRAL  
25. 380-0794 [20] RETAINER  
26. 380-0819 [5] SPRING  
31. 382-5517 [1] MANIFOLD-INLET  
32. 3K-0360 [5] SEAL-O-RING  
33. 3T-0849 M [20] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 4J-7533 [5] SEAL-O-RING  
39. 5B-9318 [5] BALL  
40. 6E-3007 [5] SPRING  
41. 6L-9716 [1] PLUG-PIPE  
42. 8T-0267 M [10] BOLT-SOCKET HEAD (M6X1X12-MM)  
43. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
   
  372-0918 AFJ [6] SEAL-INTEGRAL  
  382-3301 AFJY [1] VALVE GP-CONTROL (BLADE TIP)  
  382-3302 AFJY [1] VALVE GP-CONTROL (SIDESHIFT)  
  382-3304 AFJY [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
  382-3305 AFJY [2] VALVE GP-CONTROL (WHEEL LEAN)  
   
    AVAILABLE REPAIR KIT(S):
  471-4231 H [1] KIT-SEAL (CHECK VALVE)  
    (INCLUDES SEALS & BACKUP RINGS)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   REFER TO "FIELD REPLACEMENT REFERENCE" CHART ON GRAPHIC
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430968
 

259-6920: VALVE GP-BANK 6

259-6920 VALVE GP-BANK 6
S/N B9J1-UP
PART OF 252-4675, 252-4679, 290-8146, 351-2408, 351-2409, 391-4388, 391-4389 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02303528 SEBP4243
2596920 VALVE GP-BANK 6 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [7] SEAL-INTEGRAL  
3. 249-5334 [4] ROD  
4. 259-6896 Y [1] VALVE GP-CONTROL (BLADE TIP)  
5. 259-6903 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
6. 259-6906 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 259-6907 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 259-6908 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
9. 259-6909 Y [1] VALVE GP-CONTROL (PLOW, BULLDOZER LIFT)  
11. 273-1871 [1] COVER  
12. 292-2033 Y [1] MANIFOLD GP-VALVE (INLET)  
13. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
14. 148-8411 [12] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42430969
 

259-6925: VALVE GP-BANK 6

259-6925 VALVE GP-BANK 6
S/N B9J1-UP
PART OF 252-4679, 252-4682, 252-4683, 290-8144, 351-2409, 351-2410, 391-4389, 391-4390 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02303597 SEBP4243
2596925 VALVE GP-BANK 6 Parts scheme
  For full view, you need register

Parts for your 14M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [7] SEAL-INTEGRAL  
3. 249-5334 [4] ROD  
4. 259-6912 Y [1] VALVE GP-CONTROL (ARTICULATION)  
5. 259-6913 Y [1] VALVE GP-CONTROL (RIPPER)  
6. 259-6914 Y [1] VALVE GP-CONTROL (WING LIFT)  
7. 259-6915 Y [1] VALVE GP-CONTROL (WING TILT)  
9. 261-3268 Y [1] VALVE GP-CONTROL (BLADE LIFT, LH)  
9A. 261-3268 Y [1] VALVE GP-CONTROL (BLADE LIFT, RH)  
10. 273-1871 [1] COVER  
11. 292-2034 Y [1] MANIFOLD GP-VALVE (INLET)  
12. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
13. 148-8411 [12] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Installation of Additional Hydraulic Valves on Certain M-Series Motor Graders {5051}
Installation of Additional Hydraulic Valves on Certain M-Series Motor Graders {5051}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN 120M, 12M, 140M, 14M, 160M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL PLATES ON CERTAIN M SERIES MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING SOME SECONDARY STEERING SYSTEM COMPONENTS ON CERTAIN 14M MOTOR GRADERS
Testing and Adjusting
Bank Valve (Grade Control) - Calibrate
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Bank Valve (Grade Control) - Calibrate
AccuGrade® (CD610)
Troubleshooting
Hydraulic System
AccuGrade® (CD610)
Disassembly and Assembly
Bank Valve - Remove - Rear Frame
14M Motor Grader Machine Systems
Bank Valve - Install - Rear Frame
14M Motor Grader Machine Systems
Bank Valve - Disassemble - Rear Frame
14M Motor Grader Machine Systems
Bank Valve - Assemble - Rear Frame
14M Motor Grader Machine Systems
Bank Valve - Remove - Front Frame
14M Motor Grader Machine Systems
Bank Valve - Install - Front Frame
14M Motor Grader Machine Systems
Bank Valve - Disassemble - Front Frame
14M Motor Grader Machine Systems
Bank Valve - Assemble - Front Frame
14M Motor Grader Machine Systems
Service Magazine
New Torque Procedure for Motor Grader Bank Valve Group {5051}
2008/06/09
A New Integral Seal for the Control Valve Is Now Used on Certain M and M Series 2 Motor Graders {5051}
2011/12/16
A New Rework Procedure Improves Gerotor Motor and Control Valve for the Circle Drive on Certain Motor Graders {5051, 5082}
2012/07/27
An Improved Steering Actuator Valve is Available for M and M Series 2 Motor Graders {5051}
2013/05/03

Caterpillar Parts SIS Catalog 14M :

VALVE GP-BANK 1
308-0935 VALVE GP-BANK 1
TANK GP-HYDRAULIC
241-3867 TANK GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
233-4259 TANK & MTG GP-HYDRAULIC
SWIVEL GP
452-9419 SWIVEL GP
SWIVEL GP
362-5223 SWIVEL GP
SWIVEL GP
362-5223 SWIVEL GP
SWIVEL GP
362-5222 SWIVEL GP
SWIVEL GP
361-8144 SWIVEL GP
VALVE GP-BANK 3
382-4424 VALVE GP-BANK 3
VALVE GP-BANK 4
259-6924 VALVE GP-BANK 4
VALVE GP-BANK 4
382-4425 VALVE GP-BANK 4
VALVE GP-BANK 4
487-3034 VALVE GP-BANK 4
VALVE GP-BANK 5
259-6919 VALVE GP-BANK 5
VALVE GP-BANK 5
382-4411 VALVE GP-BANK 5
VALVE GP-BANK 5
487-3020 VALVE GP-BANK 5
VALVE GP-BANK 6
259-6920 VALVE GP-BANK 6
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.