319-0678 PUMP GP-UNIT INJECTOR HYD S/N Z9X392-UP PART OF 221-3462 PUMP & MTG GP-UNIT INJ HYD C9 MARINE ENGINE



FUEL SYSTEM
PUMP GP-FUEL INJECTION
REGULATOR GP-FUEL PRESSURE
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
ALTERNATOR GP-CHARGING

MARINE ENGINE C9 MARINE ENGINE Z9X
 C9 Marine Engine Z9X00001-UP SEBP4251 C9 Z9X   (2005)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-UNIT INJECTOR HYD
254-4358 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
295-4778 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
319-0678 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
384-0678 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
476-8769 PUMP GP-UNIT INJECTOR HYD
 

#SEBP42510170
 

319-0678: PUMP GP-UNIT INJECTOR HYD

319-0678 PUMP GP-UNIT INJECTOR HYD
S/N Z9X392-UP
PART OF 221-3462 PUMP & MTG GP-UNIT INJ HYD
i03025863 SEBP4251
3190678 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 313-4620 M [3] SCREW-PAN HEAD (M5X0.8X25-MM)  
2. 318-6357 Y [1] PUMP GP-FUEL TRANSFER  
3. 179-8128 [1] SEAL-O-RING  
4. 318-8144 [1] CONNECTOR AS  
  5P-8106 E WIRE-ELECTRICAL (26-CM)  
  179-7400 [2] SEAL  
5. 218-8655 M [8] BOLT-SOCKET HEAD (M5X0.8X42-MM)  
6. 228-5897 M [4] BOLT-TORX (M8X1.25X136.7-MM)  
7. 239-2402 [4] SEAL-O-RING  
8. 260-5716 [1] SPOOL  
9. 262-0284 [1] RING-RETAINING  
10. 1F-7960 [1] WASHER (13.5X32X6-MM THK)  
11. 1N-8062 [1] BEARING AS-NEEDLE  
12. 5C-2890 M [1] NUT (M6X1-THD)  
13. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
14. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
15. 153-7036 [1] SPOOL  
   
  227-5904 F [1] SEAL-O-RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  326-1006 [1] KIT-FUEL TRANSFER PUMP  
    (INCLUDES PUMP, BOLT, SCREW, & SEALS)
   
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42510171
 

384-0678: PUMP GP-UNIT INJECTOR HYD

384-0678 PUMP GP-UNIT INJECTOR HYD
PART OF 388-2124 PUMP & MTG GP-UNIT INJ HYD
i05238689 SEBP4251
3840678 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 153-7036 [1] SPOOL  
2. 313-4620 M [3] SCREW-PAN HEAD (M5X0.8X25-MM)  
3. 179-8128 [1] SEAL-O-RING (FUEL SYSTEM)  
4. 218-8655 M [8] BOLT-SOCKET HEAD (M5X0.8X42-MM)  
5. 228-5897 M [4] BOLT-TORX (M8X1.25X136.7-MM)  
6. 318-8144 [1] CONNECTOR AS  
  5P-8106 E WIRE-ELECTRICAL (26-CM)  
  179-7400 [2] SEAL  
7. 239-2402 [4] SEAL-O-RING  
8. 260-5716 [1] SPOOL  
9. 318-6357 Y [1] PUMP GP-FUEL TRANSFER  
10. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
11. 262-0284 [1] RING-RETAINING  
12. 1N-8062 [1] BEARING AS-NEEDLE  
13. 5C-2890 M [1] NUT (M6X1-THD)  
14. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
   
  227-5904 F [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42510172
 

476-8769: PUMP GP-UNIT INJECTOR HYD

476-8769 PUMP GP-UNIT INJECTOR HYD
PART OF 388-2124 PUMP & MTG GP-UNIT INJ HYD
i06284173 SEBP4251
4768769 PUMP GP-UNIT INJECTOR HYD Parts scheme 4768769 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 1N-8062 [1] BEARING AS-NEEDLE  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 6V-5048 [3] SEAL-O-RING  
4. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
5. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
6. 153-7036 [1] SPOOL  
7. 179-8128 [1] SEAL-O-RING  
8. 193-1736 [1] SEAL-O-RING  
9. 218-8655 M [8] BOLT-SOCKET HEAD (M5X0.8X42-MM)  
10. 318-6357 Y [1] PUMP GP-FUEL TRANSFER  
11. 228-5897 M [4] BOLT-TORX (M8X1.25X136.7-MM)  
12. 239-2402 [4] SEAL-O-RING  
13. 260-5716 [1] SPOOL  
14. 262-0284 [1] RING-RETAINING  
15. 313-4620 M [3] SCREW-PAN HEAD (M5X0.8X25-MM)  
   
  227-5904 F [1] SEAL-O-RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  326-1006 Y [1] KIT-FUEL TRANSFER PUMP  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42510173
 

205-1306: REGULATOR GP-FUEL PRESSURE

205-1306 REGULATOR GP-FUEL PRESSURE
PART OF 197-6007 LINES GP-FUEL FILTER
i01964034 SEBP4251
2051306 REGULATOR GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 295-1803 [1] ELBOW AS  
1A. 6V-5049 [1] SEAL-O-RING  
  196-6838 ELBOW  
2. 232-0343 Y [1] REGULATOR GP-FUEL PRESSURE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42510174
 

232-0343: REGULATOR GP-FUEL PRESSURE

232-0343 REGULATOR GP-FUEL PRESSURE
PART OF 197-6007 LINES GP-FUEL FILTER, 205-1306 REGULATOR GP-FUEL PRESSURE
i01970511 SEBP4251
2320343 REGULATOR GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 214-7568 [1] SEAL-O-RING  
2. 369-6662 [1] REGULATOR AS (FUEL PRESSURE)  
 

#SEBP42510175
 

118-9476: ADAPTER GP-SENSOR

118-9476 ADAPTER GP-SENSOR -TRANSMISSION
FOR USE WITH TRANSMISSION TEMPERATURE AND PRESSURE SENSORS
AN ATTACHMENT
i01352490 SEBP4251
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  9X-0263 J [1] ADAPTER (TRANSMISSION OIL PRESSURE)  
  9X-3271 N [1] ADAPTER (1/2-14-THD)(TRANSMISSION OIL TEMPERATURE)  
  6V-5048 J [1] SEAL-O-RING  
  6V-5049 N [1] SEAL-O-RING  
  J   PARTS MARKED J ARE USED TOGETHER
  N   PARTS MARKED N ARE USED TOGETHER
 

#SEBP42510176
 

229-2012: ADAPTER GP-SENSOR

229-2012 ADAPTER GP-SENSOR -TRANSMISSION
FOR USE WITH TRANSMISSION TEMPERATURE AND PRESSURE SENSORS
AN ATTACHMENT
i01930760 SEBP4251
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  9X-0263 J [1] ADAPTER (TRANSMISSION OIL PRESS SENSOR)  
    (1/8-27 NPT THREAD)
  112-3231 N [1] ADAPTER (1/2-14-THD)(TRANSMISSION OIL TEMP SENSOR)  
    (1/2-14 NPT THREAD)
  6V-5048 J [1] SEAL-O-RING (8.92MM ID)  
  112-5282 N [1] SEAL-O-RING (16.36MM ID)  
  J   PARTS MARKED J ARE USED TOGETHER
  N   PARTS MARKED N ARE USED TOGETHER
 

#SEBP42510177
 

197-6014: ALTERNATOR GP-CHARGING

197-6014 ALTERNATOR GP-CHARGING
12-VOLT, 110-AMPERE
CANNOT BE USED WITH @@@@@206-2650@@@@@, @@@@@245-4596@@@@@, @@@@@249-7167@@@@@
AN ATTACHMENT
i01986929 SEBP4251
1976014 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9S-1240 [1] BRACKET AS  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
2. 238-0364 [1] PULLEY-ALTERNATOR (8-GROOVE)  
3. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
3A. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
3B. 166-6358 [1] COVER-DUST  
4. 192-2169 [1] BELT-SERPENTINE  
5. 194-4827 [1] BRACKET AS-ALTERNATOR  
6. 206-9790 [1] BRACKET  
7. 206-9791 [1] BRACKET-MOUNTING  
8. 211-2101 [2] SLEEVE  
9. 8T-8917 [1] BOLT (1/2-13X1.25-IN)  
10. 266-7224 Y [1] ALTERNATOR GP-CHARGING  
11. 7X-0338 [1] BOLT (1/2-13X6-IN)  
12. 201-6699 [1] BELT TENSIONER (ALTERNATOR)  
13. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
16. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
17. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
18. 6V-5843 M [1] BOLT (M10X1.5X45-MM)  
19. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
20. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
21. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42510178
 

206-2650: ALTERNATOR GP-CHARGING

206-2650 ALTERNATOR GP-CHARGING
24-VOLT, 75-AMPERE
CANNOT BE USED WITH @@@@@207-4854@@@@@, @@@@@197-6014@@@@@, @@@@@245-4596@@@@@, @@@@@249-7167@@@@@
AN ATTACHMENT
i01987408 SEBP4251
2062650 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9S-1240 [1] BRACKET AS  
2. 238-0364 [1] PULLEY-ALTERNATOR (8-GROOVE)  
3. 266-7226 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 75-AMPERE)  
4. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
  151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
  166-6358 [1] COVER-DUST  
  173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
5. 192-2169 [1] BELT-SERPENTINE  
6. 194-4827 [1] BRACKET AS-ALTERNATOR  
7. 206-9790 [1] BRACKET  
8. 206-9791 [1] BRACKET-MOUNTING  
9. 211-2101 [2] SLEEVE  
10. 8T-8917 [1] BOLT (1/2-13X1.25-IN)  
11. 7X-0338 [1] BOLT (1/2-13X6-IN)  
12. 201-6699 [1] BELT TENSIONER (ALTERNATOR)  
13. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
16. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
17. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
18. 6V-5843 M [1] BOLT (M10X1.5X45-MM)  
19. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
20. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
21. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42510179
 

207-4854: ALTERNATOR GP-CHARGING

207-4854 ALTERNATOR GP-CHARGING
12-VOLT, 160-AMPERE
CANNOT BE USED WITH @@@@@245-4596@@@@@, @@@@@249-7167@@@@@
AN ATTACHMENT
i02118610 SEBP4251
2074854 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your C9 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9S-1240 [1] BRACKET AS  
2. 238-0364 [1] PULLEY-ALTERNATOR (8-GROOVE)  
3. 173-1498 [1] PULLEY AS-IDLER (8-GROOVE)  
3A. 151-2900 M [1] BOLT (M10X1.5X54.25-MM)  
3B. 166-6358 [1] COVER-DUST  
3C. 173-1500 [1] SPACER (10.4X45.1X1.8-MM THK)  
4. 192-2169 [1] BELT-SERPENTINE (ALTERNATOR)  
5. 206-9790 [1] BRACKET  
6. 206-9791 [1] BRACKET-MOUNTING  
7. 206-9792 [1] BRACKET  
8. 211-2101 [2] SLEEVE  
9. 8T-8917 [1] BOLT (1/2-13X1.25-IN)  
10. 7X-0338 [1] BOLT (1/2-13X6-IN)  
11. 201-6699 [1] BELT TENSIONER (ALTERNATOR)  
12. 206-5696 [1] ALTERNATOR GP-CHARGING  
13. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
16. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
17. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
18. 6V-5843 M [1] BOLT (M10X1.5X45-MM)  
19. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
20. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
21. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

Information:

Engine News
Using Injector Trim Files {1251, 7620}
2005/05/02
A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2008/06/30
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
2008/06/30
New Improved Fuel Injectors Are Now Used {1251, 1290}
2008/10/06
A New Unit Injector Hydraulic Pump Group Is Available for Certain C9 Commercial Engines {1714}
2012/09/17
A New Injector Hydraulic Pump Group Is Available For Certain C9 Marine Engines {1714}
2013/03/13
Operation and Maintenance Manual
Injector Bolt Torque - Inspect
C9 Marine Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714}
Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714}
Debris in Oil System Causing Repeat Failures of the (HEUI) Pump for Certain C7 and C9 Engines. {1126, 1251, 1318, 1378}
Debris in Oil System Causing Repeat Failures of the (HEUI) Pump for Certain C7 and C9 Engines. {1126, 1251, 1318, 1378}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 AND C9 MARINE AND GENSET ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 AND C9 MARINE AND GENSET ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
High-Pressure Fuel Pumps Are Failing on Certain C9 and C9.3 Engines {1714}
High-Pressure Fuel Pumps Are Failing on Certain C9 and C9.3 Engines {1714}
Specifications
Unit Injector Hydraulic Pump
C9 Marine Engines and C9 Marine Generator Sets
Electronic Unit Injector
C9 Marine Engines and C9 Marine Generator Sets
Unit Injector Hydraulic Pump
C9 Marine Engines and C9 Marine Generator Sets
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 AND C9 MARINE AND GENSET ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 AND C9 MARINE AND GENSET ENGINES
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 AND C9 MARINE AND GENSET ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 AND C9 MARINE AND GENSET ENGINES
Testing and Adjusting
Electronic Unit Injector - Test
C9 Marine Generator Set Engines
Troubleshooting
Injector Solenoid Circuit - Test
C7 and C9 Marine Engines
Injector Trim File
C7 and C9 Marine Engines
CID 0001 FMI 11 Cylinder #1 Injector fault
C7 and C9 Marine Engines
CID 0002 FMI 11 Cylinder #2 Injector fault
C7 and C9 Marine Engines
CID 0003 FMI 11 Cylinder #3 Injector fault
C7 and C9 Marine Engines
CID 0004 FMI 11 Cylinder #4 Injector fault
C7 and C9 Marine Engines
CID 0005 FMI 11 Cylinder #5 Injector fault
C7 and C9 Marine Engines
CID 0006 FMI 11 Cylinder #6 Injector fault
C7 and C9 Marine Engines
Disassembly and Assembly
Electronic Unit Injector - Remove
C9 Marine Engines and C9 Marine Generator Sets
Electronic Unit Injector - Install
C9 Marine Engines and C9 Marine Generator Sets
Injection Actuation Pressure Sensor - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog C9 :

PUMP GP-UNIT INJECTOR HYD
295-4778 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
254-4358 PUMP GP-UNIT INJECTOR HYD
PUMP GP-FUEL TRANSFER
318-6357 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
154-9283 PUMP GP-FUEL PRIMING
267-9723 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
267-9722 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
267-9718 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
267-9718 PUMP GP-FUEL INJECTION
PUMP GP-UNIT INJECTOR HYD
384-0678 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
476-8769 PUMP GP-UNIT INJECTOR HYD
REGULATOR GP-FUEL PRESSURE
205-1306 REGULATOR GP-FUEL PRESSURE
REGULATOR GP-FUEL PRESSURE
232-0343 REGULATOR GP-FUEL PRESSURE
118-9476 ADAPTER GP-SENSOR
229-2012 ADAPTER GP-SENSOR
ALTERNATOR GP-CHARGING
197-6014 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
206-2650 ALTERNATOR GP-CHARGING