AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

214-1984 TANK & FILTER GP-HYDRAULIC S/N XZH1-UP PART OF 214-1983 TANK & MTG GP-HYDRAULIC 140H MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
SHAFT GP
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 140H MOTOR GRADER XZH
 140H Motor Grader XZH00001-UP (MACHINE) POWERED BY 3306 Engine SEBP4252 140H XZH   (2005)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
 

#SEBP42520290
 

214-1984: TANK & FILTER GP-HYDRAULIC

214-1984 TANK & FILTER GP-HYDRAULIC
S/N XZH1-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
i02181584 SEBP4252
2141984 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)  
3. 2S-5100 [1] VALVE-MANUAL  
4. 3F-1547 [1] SEAL-O-RING  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 9J-1979 [1] RETAINER AS  
12. 9J-3047 [1] STRAINER (HYDRAULIC TANK)  
13. 9M-7394 [1] LEVER  
14. 141-9661 [1] SPACER (20X128X6-MM THK)  
15. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
16. 214-1982 [1] TANK AS  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC TANK OIL)  
18. 086-0507 [1] PIN  
19. 1L-5072 [1] DOWEL  
20. 2D-4202 [1] PLATE  
21. 2J-7761 [1] RING-RETAINING  
22. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
23. 3G-0361 [1] GASKET  
25. 7D-1195 [1] SEAL-O-RING  
26. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4611 [1] PIN-COTTER  
32. 4B-2913 [1] PIN-CLEVIS  
  M   METRIC PART
 

#SEBP42520291
 

214-1983: TANK & MTG GP-HYDRAULIC

214-1983 TANK & MTG GP-HYDRAULIC
S/N XZH1-UP
PART OF 112-4113 CHASSIS AR
i02181622 SEBP4252
2141983 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 214-1984 Y [1] TANK & FILTER GP-HYDRAULIC  
4. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42520292
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE -STEERING
S/N XZH1-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i02180646 SEBP4252
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
2A. 027-1287 [1] FITTING-GREASE  
2B. 9K-2721 [2] LOCKWASHER  
2C. 6G-6623 [1] SEAL  
2D. 5H-3593 [1] RETAINER-FELT  
3. 6G-4358 [1] YOKE  
4. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP42520293
 

112-6795: VALVE & LINKAGE GP

112-6795 VALVE & LINKAGE GP -IMPLEMENT CONTROL-4-BANK, RH; 2-BANK, LH
S/N XZH1-UP
PART OF 112-4106 BLADE AR
i02180520 SEBP4252
1126795 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8672 Y [1] VALVE GP-BANK 2 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
  7H-3641 [12] END-ROD (5/16-24-THD)  
  8X-4276 [6] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [12] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [12] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
30. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
39. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
40. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42520294
 

115-0804: VALVE & LINKAGE GP

115-0804 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N XZH1-UP
AN ATTACHMENT
i02428545 SEBP4252
1150804 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3328 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
4A. 101-2457 [1] LEVER (SCARIFIER)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
5A. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
6. 8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
7A. 8D-5633 [1] LEVER (SIDE SHIFT)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
22A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 2G-6753 [1] KNOB-SCARIFIER  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42520295
 

115-0808: VALVE & LINKAGE GP

115-0808 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N XZH1-UP
PART OF 115-1002 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02428912 SEBP4252
1150808 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
  8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 101-2457 [1] LEVER (RIPPER)  
45. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42520296
 

115-0811: VALVE & LINKAGE GP

115-0811 VALVE & LINKAGE GP -IMPLEMENT CONTROL-4-BANK, RH; 4-BANK, LH
S/N XZH1-UP
AN ATTACHMENT
i02182330 SEBP4252
1150811 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3327 Y [1] VALVE GP-BANK 4 (LH)(LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [2] LEVER (CENTER SHIFT)  
6. 6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
  8X-4276 [8] ROD  
7. 8D-5633 [2] LEVER (SIDE SHIFT)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42520297
 

104-8672: VALVE GP-BANK 2

104-8672 VALVE GP-BANK 2 -LH
S/N XZH1-UP
PART OF 112-6795 VALVE & LINKAGE GP
i02180469 SEBP4252
1048672 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
6. 111-9321 [2] SPACER  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 101-9346 [1] COVER  
9. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
10. 4J-7533 [1] SEAL-O-RING  
11. 9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42520298
 

124-3325: VALVE GP-BANK 4

124-3325 VALVE GP-BANK 4 -RH
S/N XZH1-UP
PART OF 112-6795, 115-0804, 115-0808, 115-0811 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i02180516 SEBP4252
1243325 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-2884 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42520299
 

124-3327: VALVE GP-BANK 4

124-3327 VALVE GP-BANK 4 -LH
S/N XZH1-UP
PART OF 115-0811 VALVE & LINKAGE GP
AN ATTACHMENT
i02182329 SEBP4252
1243327 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 140H :

SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
PUMP GP-PISTON
6E-3136 PUMP GP-PISTON
PUMP & MTG GP-STEERING
8X-2379 PUMP & MTG GP-STEERING
MOTOR GP-GEROTOR
105-3196 MOTOR GP-GEROTOR
LOCK GP-CENTERSHIFT
142-8205 LOCK GP-CENTERSHIFT
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
112-6795 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0811 VALVE & LINKAGE GP
VALVE GP-BANK 2
104-8672 VALVE GP-BANK 2
VALVE GP-BANK 4
124-3325 VALVE GP-BANK 4

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.