ELECTRICAL AND STARTING SYSTEM
HARNESS GPHEATER GP
ELECTRONICS GP-COMMUNICATION
ELECTRONICS GP-MACHINE
ELECTRONICS GP-COMMUNICATION
ELECTRICAL AND STARTING SYSTEM
HARNESS GP#SEBP42740290
381-2499: HARNESS AS-WIRING
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH KIT INCLUDES PLUS AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 160-8124 | [1] | PLUG AS (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [85] | PLUG-SEAL | ||
| 289-5150 E | SLEEVE (31-CM) | |||
| 9X-3402 | [65] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [65] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7K-1181 | [3] | STRAP-CABLE | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP42740291
433-5754: HARNESS AS-WIRING
433-5754 HARNESS AS-WIRING -SEAT AIR COMPRESSOR
S/N M1G1-UP
PART OF 191-2933, 366-5830 SUSPENSION GP-SEAT
S/N M1G1-UP
PART OF 191-2933, 366-5830 SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| B | USE AS REQUIRED | |||
#SEBP42740292
217-6280: HEATER GP-JACKET WATER
217-6280 HEATER GP-JACKET WATER
S/N M1G1-UP
(240-VOLT, 1000 WATT)
PART OF 334-0438 OPTION AR-COLD WEATHER
S/N M1G1-UP
(240-VOLT, 1000 WATT)
PART OF 334-0438 OPTION AR-COLD WEATHER
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP42740293
3T-8724: HEATER GP-JACKET WATER
3T-8724 HEATER GP-JACKET WATER
S/N M1G1-UP
240-VOLT, 1000-WATT
CANNOT BE USED WITH @@@@@ 9X-3294@@@@@
S/N M1G1-UP
240-VOLT, 1000-WATT
CANNOT BE USED WITH @@@@@ 9X-3294@@@@@
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP42740294
9X-3294: HEATER GP-JACKET WATER
9X-3294 HEATER GP-JACKET WATER
S/N M1G1-UP
120-VOLT, 1000-WATT
PART OF 334-0437 OPTION AR-COLD WEATHER
CANNOT BE USED WITH @@@@@ 3T-8724@@@@@
S/N M1G1-UP
120-VOLT, 1000-WATT
PART OF 334-0437 OPTION AR-COLD WEATHER
CANNOT BE USED WITH @@@@@ 3T-8724@@@@@
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP42740295
261-3037: INSTALLATION AR-COMMUNICATION
261-3037 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N M1G1-UP
S/N M1G1-UP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 256-5068 Y | [1] | CONTROL & MTG GP-COMMUNICATION (PRODUCT LINK 321SR) | ||
| S/N M1G1-1275 | ||||
| 320-9997 Y | [1] | INSTALLATION GP-COMMUNICATION (PRODUCT LINK) | ||
| S/N M1G1276-UP | ||||
| 262-2043 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | ||
| 307-0047 | [1] | FILM-INFORMATION (PRODUCT LINK, READ OMM) | ||
| S/N M1G1-1275; M3G1-409; M5G1-388 | ||||
| (INSIDE CAB ON LEFT FRONT METAL POST BELOW FILM-WARN LINK) | ||||
| 230-1341 | [1] | FILM-WARNING (PRODUCT LINK RADIO, INTL) | ||
| S/N M1G1-1275; M3G1-409; M5G1-388 | ||||
| (INSIDE CAB ON LEFT FRONT METAL POST 1200-MM ABOVE CAB FLOOR) | ||||
| 274-4283 | [1] | FILM-WARNING (EXPLOSION HAZARD, PRODUCT LINK) | ||
| S/N M1G1276-UP; M3G410-UP; M5G389-UP | ||||
| (INSIDE CAB ON LEFT FRONT METAL POST ("A" POST) 820-MM ABOVE CAB FLOOR TO BOTTOM OF FILM) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740296
263-3322: INSTALLATION AR-COMMUNICATION
263-3322 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N M1G1-UP
PART OF 249-8107 CONVERSION AR-CERTIFICATION, 334-0413, 334-0414, 368-8482, 388-3771 CONVERSION AR-MACHINE, 334-0412 OPTION AR-MACHINE
S/N M1G1-UP
PART OF 249-8107 CONVERSION AR-CERTIFICATION, 334-0413, 334-0414, 368-8482, 388-3771 CONVERSION AR-MACHINE, 334-0412 OPTION AR-MACHINE
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 262-2043 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | ||
| 320-9997 Y | [1] | INSTALLATION GP-COMMUNICATION (PRODUCT LINK) | ||
| 307-0047 | [1] | FILM-INFORMATION (PRODUCT LINK, READ OMM) | ||
| (INSIDE CAB ON LEFT FRONT METAL POST BELOW FILM-WARN LINK) | ||||
| 274-4284 | [1] | FILM-WARNING (EXPLOSION, RADIO PRODUCT LINK) | ||
| (INSIDE CAB ON LEFT FRONT METAL POST 820-MM ABOVE CAB FLOOR TO BOTTOM OF FILM) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740297
243-1945: INSTALLATION AR-SECURITY
243-1945 INSTALLATION AR-SECURITY
S/N M1G1-UP
S/N M1G1-UP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP42740298
320-9997: INSTALLATION GP-COMMUNICATION
320-9997 INSTALLATION GP-COMMUNICATION -PRODUCT LINK
S/N M1G1276-1475
PART OF 261-3037, 263-3322 INSTALLATION AR-COMMUNICATION
S/N M1G1276-1475
PART OF 261-3037, 263-3322 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 7K-1181 | [9] | STRAP-CABLE | |
| 3. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 4. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 5. | 229-2704 B | [4] | SEAL | |
| 6. | 239-9954 Y | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK 300) | |
| 7. | 255-4369 | [1] | GROMMET | |
| 8. | 263-9088 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 9. | 264-4872 | [1] | BRACKET AS | |
| 10. | 276-0031 | [1] | HARNESS AS-CONTROL (PRODUCT LINK) | |
| 11. | 318-9628 | [1] | PLATE | |
| 12. | 156-6175 | [2] | CLIP (LADDER) | |
| 13. | 310-2393 | [1] | ANTENNA AS (450-CM) | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 14. | 4D-8123 | [1] | CLIP | |
| 15. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 16. | 8C-8451 M | [3] | BOLT (M6X1X40-MM) | |
| 17. | 8T-2947 M | [1] | BOLT (M6X1X45-MM) | |
| 18. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 22. | 9X-2046 M | [2] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 23. | 9X-6165 | [8] | WASHER (6.5X22X2.5-MM THK) | |
| 24. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740299
320-9997: INSTALLATION GP-COMMUNICATION
320-9997 INSTALLATION GP-COMMUNICATION -PRODUCT LINK
S/N M1G1476-2026
PART OF 261-3037, 263-3322 INSTALLATION AR-COMMUNICATION
S/N M1G1476-2026
PART OF 261-3037, 263-3322 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 7K-1181 | [9] | STRAP-CABLE | |
| 3. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 4. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 5. | 229-2704 B | [4] | SEAL | |
| 6. | 262-1421 CY | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | |
| 7. | 255-4369 | [1] | GROMMET | |
| 8. | 263-9088 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 9. | 264-4872 | [1] | BRACKET AS | |
| 10. | 276-0031 | [1] | HARNESS AS-CONTROL (PRODUCT LINK) | |
| 11. | 318-9628 | [1] | PLATE | |
| 12. | 156-6175 | [2] | CLIP (LADDER) | |
| 13. | 310-2393 | [1] | ANTENNA AS (450-CM) | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 14. | 4D-8123 | [1] | CLIP | |
| 15. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 16. | 8C-8451 M | [3] | BOLT (M6X1X40-MM) | |
| 17. | 8T-2947 M | [1] | BOLT (M6X1X45-MM) | |
| 18. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 22. | 9X-2046 M | [2] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 23. | 9X-6165 | [8] | WASHER (6.5X22X2.5-MM THK) | |
| 24. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
