ELECTRICAL AND STARTING SYSTEM
CIRCUIT BREAKER GPRADIO GP
RECEPTACLE GP-AUXILIARY START
RELAY GP
SENSOR GP
ELECTRICAL AND STARTING SYSTEM
CIRCUIT BREAKER GP
#SEBP42740350
324-0688: PANEL GP-CIRCUIT BREAKER
324-0688 PANEL GP-CIRCUIT BREAKER
S/N M1G1783-UP
PART OF 324-0692 WIRING GP-CHASSIS
S/N M1G1783-UP
PART OF 324-0692 WIRING GP-CHASSIS
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [8] | STRAP-CABLE | |
| 3. | 7U-4891 | [6] | SCREW (10-32X1-IN) | |
| 4. | 125-1302 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 5. | 149-2612 | [1] | RELAY AS (24-VOLT) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 171-2206 | [1] | CIRCUIT BREAKER AS (50-AMPERE) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 7. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 8. | 171-2211 | [1] | CIRCUIT BREAKER AS (90-AMPERE) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 9. | 184-6636 | [1] | PLATE-INFORMATION (ENGINE SHUTOFF) | |
| 10. | 193-3973 | [2] | STRAP-CABLE | |
| 11. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 12. | 301-2979 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 13. | 323-8359 | [1] | PANEL AS | |
| 14. | 354-2734 | [1] | HARNESS AS-CHASSIS (MAIN) | |
| 8N-1535 | [1] | BELL AS-END | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 346-0305 | [1] | BOOT | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [10] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 128-4249 | [2] | LOCKWASHER | ||
| 180-9214 | [2] | NUT (1-11/16-18-THD) | ||
| 7T-0093 | [3] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1540 | [1] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 126-1767 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [55] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [55] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [73] | PLUG-SEAL | ||
| 9G-3695 | [2] | PLUG-SEAL | ||
| 8N-1533 | [1] | PLUG AS-CONNECTOR (7-PIN) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 183-5784 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 188-6210 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 295-8961 | [1] | RECEPTACLE AS-CONNECTOR (18-PIN) | ||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 114-8843 E | SLEEVE-PLASTIC (90-CM) | |||
| E | SLEEVE-PLASTIC (20-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (100-CM) | |||
| 289-5150 E | SLEEVE (36-CM) | |||
| 289-5151 E | SLEEVE (40-CM) | |||
| 317-1204 E | SLEEVE (104-CM) | |||
| 337-7979 E | SLEEVE (152-CM) | |||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 9X-6772 | [1] | STRAP-CABLE | ||
| 8N-1541 | [3] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1543 | [1] | SOCKET-CONNECTOR (10-GA) | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 9X-3402 | [138] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [138] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 278-1438 | [1] | TERMINAL-RING | ||
| 7T-9346 | [1] | TERMINAL AS-BATTERY | ||
| 3L-6513 | [1] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM) | |||
| 131-1478 | [1] | TERMINAL AS | ||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 131-1500 | [2] | TERMINAL AS-RING | ||
| (EACH INCLUDES) | ||||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 131-1507 | [1] | TERMINAL AS-RING | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 212-3553 | [1] | TERMINAL AS | ||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| -OR- | ||||
| 2L-8057 | [1] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 276-7498 | [1] | TERMINAL AS-RING | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| [1] | TERMINAL AS-RING | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 285-5600 | [2] | TERMINAL AS-RING | ||
| (EACH INCLUDES) | ||||
| 125-7874 | [4] | TUBE-HEAT SHRINK (5.72-MM DIA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 15. | 324-0693 | [1] | WIRE AS | |
| 16. | 324-0694 | [1] | CABLE AS | |
| 6V-2369 D | CABLE (4-GA, BLACK)(1-M) | |||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| [1] | TERMINAL AS-RING | |||
| 17. | 324-0699 | [1] | PLATE | |
| 18. | 324-0700 | [1] | FILM-IDENTIFICATION (FUSE PANEL) | |
| 19. | 132-5789 | [1] | CLIP (LADDER) | |
| 20. | 139-4724 | [1] | CIRCUIT BREAKER AS (30-AMPERE) | |
| 21. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 22. | 248-3288 Y | [1] | CIRCUIT BREAKER GP (15-AMPERE) | |
| 23. | 288-3687 | [1] | CIRCUIT BREAKER AS (20-AMPERE) | |
| 6V-8378 | [2] | NUT (10-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 24. | 4B-4274 | [6] | WASHER (5.5X13X1.2-MM THK) | |
| 25. | 4B-4863 | [6] | WASHER (4.7X11X1.2-MM THK) | |
| 26. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 27. | 7U-4892 | [6] | SCREW (8-32X0.75-IN) | |
| 28. | 7X-0620 | [3] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| 29. | 7X-3393 | [2] | WASHER-HARD (8.3X19X1.83-MM THK) | |
| 30. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 32. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 34. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 35. | 8T-4970 M | [6] | BOLT (M6X1X14-MM) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740351
263-9088: RADIO GP-COMMUNICATION
263-9088 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N M1G1276-UP
PART OF 320-9997 INSTALLATION GP-COMMUNICATION
S/N M1G1276-UP
PART OF 320-9997 INSTALLATION GP-COMMUNICATION
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 336-3566 | [1] | SOFTWARE GP-COMMUNICATION (PRODUCT LINK 121SR) |
#SEBP42740352
336-3545: RADIO GP-COMMUNICATION
336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N M1G2027-UP
PART OF 320-9997 INSTALLATION GP-COMMUNICATION
S/N M1G2027-UP
PART OF 320-9997 INSTALLATION GP-COMMUNICATION
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 499-3794 | [1] | SOFTWARE GP-COMMUNICATION (PRODUCT LINK 121SR) |
#SEBP42740353
241-0645: RECEPTACLE GP-AUXILIARY START
241-0645 RECEPTACLE GP-AUXILIARY START -JUMP START
S/N M1G798-1782
PART OF 241-0639 BATTERY & WIRING GP
S/N M1G798-1782
PART OF 241-0639 BATTERY & WIRING GP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 290-6516 | [1] | RECEPTACLE AS | |
| 2. | 6D-4246 | [1] | CLIP (LOOP) | |
| 3. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 4. | 8S-2634 | [1] | COVER AS | |
| 5. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 7. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 9. | 146-6747 | [1] | FILM-INFORMATION (24-VOLT) | |
| 10. | 225-0313 | [1] | FILM-WARNING (JUMP START, READ OMM, U.S.) | |
| 11. | 2V-1771 | [1] | GROMMET | |
| M | METRIC PART | |||
#SEBP42740354
335-2608: RELAY GP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP42740355
180-0156: SENSOR & MTG GP-LIFT POSITION
180-0156 SENSOR & MTG GP-LIFT POSITION
S/N M1G1-1886
PART OF 237-0235 ELECTRICAL AR
S/N M1G1-1886
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-2743 | [3] | SPACER (12X20X9-MM THK) | |
| 2. | 166-0599 | [1] | ROD | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (LIFT) | |
| 4. | 179-7000 | [1] | ARM | |
| 5. | 199-4064 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 214-3616 | [1] | PLATE | |
| 7. | 214-3617 | [1] | PLATE | |
| 8. | 130-5300 | [1] | CLIP | |
| 9. | 160-8500 M | [2] | NUT (M8X1.25-THD) | |
| 10. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
| 11. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 12. | 7X-7662 | [2] | ROD END | |
| 13. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 15. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 20. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740356
180-0156: SENSOR & MTG GP-LIFT POSITION
180-0156 SENSOR & MTG GP-LIFT POSITION
S/N M1G1887-UP
PART OF 237-0235 ELECTRICAL AR
S/N M1G1887-UP
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 091-0081 | [3] | SPACER (10.5X20X10-MM THK) | |
| 2. | 166-0599 | [1] | ROD | |
| 3. | 266-2337 CY | [1] | SENSOR GP-POSITION (ROTARY)(LIFT) | |
| 4. | 179-7000 | [1] | ARM | |
| 5. | 199-4064 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 214-3616 | [1] | PLATE | |
| 7. | 214-3617 | [1] | PLATE | |
| 8. | 130-5300 | [1] | CLIP | |
| 9. | 160-8500 M | [4] | NUT (M8X1.25-THD) | |
| 10. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
| 11. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 12. | 7X-7662 | [2] | ROD END | |
| 13. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 15. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 20. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740357
239-4850: SENSOR & MTG GP-PRESSURE
239-4850 SENSOR & MTG GP-PRESSURE -LIFT CYLINDER OIL
S/N M1G1-UP
PART OF 244-3253, 263-5255 CONTROL AR-AUTODIG, 244-4478, 328-6130 MONITOR AR-PAYLOAD
S/N M1G1-UP
PART OF 244-3253, 263-5255 CONTROL AR-AUTODIG, 244-4478, 328-6130 MONITOR AR-PAYLOAD
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-4376 | [1] | FITTING | |
| 2. | 6V-0852 | [1] | CAP-DUST | |
| 3. | 164-6871 | [1] | ADAPTER AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 4. | 221-3416 Y | [1] | SENSOR GP-PRESSURE (LIFT CYLINDER OIL) | |
| 5. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 6. | 3J-1907 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740358
180-0157: SENSOR & MTG GP-TILT POSITION
180-0157 SENSOR & MTG GP-TILT POSITION
S/N M1G1-1181
PART OF 237-0235 ELECTRICAL AR
S/N M1G1-1181
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-7662 | [2] | ROD END | |
| 2. | 130-5300 | [1] | CLIP | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (TILT) | |
| 4. | 208-3908 | [1] | COVER | |
| 5. | 210-5682 | [1] | ARM AS | |
| 6. | 210-5683 | [1] | COVER AS | |
| 7. | 213-0364 | [1] | BRACKET AS | |
| 8. | 214-3616 | [1] | PLATE | |
| 9. | 214-3617 | [1] | PLATE | |
| 10. | 160-8500 M | [2] | NUT (M8X1.25-THD) | |
| 11. | 4D-7794 | [1] | CLIP | |
| 12. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
| 13. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 14. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 15. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4224 | [11] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 22. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42740359
303-2243: SENSOR & MTG GP-TILT POSITION
303-2243 SENSOR & MTG GP-TILT POSITION
S/N M1G1182-UP
PART OF 237-0235 ELECTRICAL AR
S/N M1G1182-UP
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-4339 | [1] | SPACER (10.5X18X21-MM THK) | |
| 2. | 168-6514 | [1] | SPACER (10.74X17.14X50.8-MM THK) | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (TILT) | |
| 4. | 249-4134 | [1] | PLATE | |
| 5. | 249-4135 | [1] | COVER | |
| 6. | 269-7250 | [1] | PLATE | |
| 7. | 275-0529 | [1] | BRACKET AS | |
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 302-5144 | [1] | ARM | |
| 9. | 130-5300 | [1] | CLIP | |
| 10. | 4D-7794 | [1] | CLIP | |
| 11. | 5P-9085 | [1] | CLIP (LOOP) | |
| 12. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 13. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 14. | 8T-0341 M | [1] | BOLT-SOCKET HEAD (M10X1.5X60-MM) | |
| 15. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 18. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 19. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 21. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
