BASIC ENGINE
VALVE MECHANISM GPAIR COMPRESSOR GP
PAN GP-OIL
SUPPRESSION GP-SOUND
PISTON & ROD GP
BASIC ENGINE
VALVE MECHANISM GP
#SEBP42750120
190-0009: MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N TXG1-UP; LHX27343-UP
PART OF 241-5929, 351-2841, 449-8566 ENGINE AR-CORE
S/N TXG1-UP; LHX27343-UP
PART OF 241-5929, 351-2841, 449-8566 ENGINE AR-CORE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750121
280-2167: MECHANISM GP-FUEL PUMP & VALVE
280-2167 MECHANISM GP-FUEL PUMP & VALVE
S/N LHX4623-4868
PART OF 279-1260 ENGINE AR-CORE
S/N LHX4623-4868
PART OF 279-1260 ENGINE AR-CORE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750122
188-1754: MOUNTING GP-ALTERNATOR & COMPR
188-1754 MOUNTING GP-ALTERNATOR & COMPR
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750123
239-5527: PAN GP-OIL
239-5527 PAN GP-OIL
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7373 | [1] | TUBE AS | |
| 3. | 115-2359 | [1] | TUBE AS | |
| 4. | 115-2365 | [1] | BRACKET-TUBE | |
| 5. | 118-2019 | [1] | UNDERFRAME AS | |
| 6. | 168-5248 | [1] | SEAL-ISOLATION | |
| 7. | 227-3004 | [1] | PAN-OIL | |
| 8. | 0L-1351 | [3] | BOLT (3/8-16X0.875-IN) | |
| 9. | 0S-1591 | [4] | BOLT (3/8-16X1.5-IN) | |
| 10. | 0S-1594 | [5] | BOLT (3/8-16X1-IN) | |
| 11. | 5P-5846 | [1] | SEAL-O-RING | |
| 12. | 5P-8068 | [1] | SEAL-O-RING | |
| 13. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 14. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 9X-6458 | [5] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP42750124
284-7702: PAN GP-OIL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-3205 | [32] | BOLT-WASHER HEAD (3/8-16X1.75-IN) | |
| 2. | 122-0957 | [1] | ADAPTER-STRAIGHT | |
| 3. | 4P-7373 | [1] | TUBE AS | |
| 4. | 6V-7238 | [1] | VALVE-SHUTOFF (ENGINE OIL PAN DRAIN) | |
| 5. | 9N-3167 | [1] | PLATE | |
| 6. | 115-2365 | [1] | BRACKET-TUBE | |
| 7. | 188-0210 | [2] | GASKET | |
| 8. | 230-7201 | [1] | COVER | |
| 9. | 275-4261 | [1] | PAN-OIL | |
| 10. | 281-0570 | [1] | TUBE AS | |
| 11. | 5P-7701 | [1] | SEAL-O-RING | |
| 12. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 13. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 14. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 15. | 109-0072 | [1] | SEAL-O-RING | |
| 16. | 109-0078 | [1] | SEAL-O-RING | |
| 17. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 18. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 19. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 6V-3830 | [1] | SEAL-O-RING | |
| 21. | 8L-2786 | [1] | SEAL-O-RING | |
| 22. | 9X-6458 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP42750125
174-3874: PANEL GP-SOUND SUPPRESSION
174-3874 PANEL GP-SOUND SUPPRESSION -ENGINE, LH
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
FOR USE WITH BRAKESAVER OR NON-BRAKESAVER ENGINES, ALL APPLICATIONS
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
FOR USE WITH BRAKESAVER OR NON-BRAKESAVER ENGINES, ALL APPLICATIONS
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750126
227-9980: PANEL GP-SOUND SUPPRESSION
227-9980 PANEL GP-SOUND SUPPRESSION -ENGINE FRONT HOUSING
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
CANNOT BE USED WITH ALTERNATOR MOUNTING GROUPS AND ACCESSORY DRIVE GROUPS
S/N TXG1-UP; LHX1-UP
PART OF 238-0973, 303-1581, 349-4456, 360-0418 ENGINE AR-COMPLETE
CANNOT BE USED WITH ALTERNATOR MOUNTING GROUPS AND ACCESSORY DRIVE GROUPS
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 324-6804 | [1] | COVER AS | |
| 2. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 3. | 0S-1594 | [3] | BOLT (3/8-16X1-IN) | |
| 4. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
| 5. | 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | |
| 6. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 8. | 9X-6458 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP42750127
229-2863: PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX1-7173
18:1 COMPRESSION RATIO
PART OF 241-5929, 279-1260 ENGINE AR-CORE
S/N LHX1-7173
18:1 COMPRESSION RATIO
PART OF 241-5929, 279-1260 ENGINE AR-CORE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 2. | 164-4187 C | [1] | RING-PISTON (INTERMEDIATE) | |
| 3. | 180-7350 | [1] | PIN-PISTON | |
| 4. | 197-9361 | [1] | TUBE AS-OIL JET | |
| 5. | 224-3245 | [1] | ROD AS | |
| 5A. | 219-4458 | [2] | PIN-DOWEL | |
| 5B. | 213-3217 M | [4] | BOLT (M11X1.25X84-MM) | |
| 5C. | 229-6259 | [1] | BEARING | |
| 6. | 224-3246 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 232-3235 AB | BEARING-CONNECTING ROD (0.64-MM US) | |||
| 232-3236 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 247-6123 CJ | [1] | BODY AS-PISTON | |
| -OR- | ||||
| 346-6616 L | [1] | BODY AS-PISTON | ||
| 8. | 230-2569 J | [2] | RETAINER-PIN | |
| -OR- | ||||
| 250-2940 L | [2] | RETAINER-PIN | ||
| 9. | 247-6130 CJ | [1] | RING-PISTON-TOP | |
| -OR- | ||||
| 310-4188 L | [1] | RING-PISTON (TOP) | ||
| 10. | 238-0294 J | [1] | RING-PISTON (OIL) | |
| -OR- | ||||
| 306-4014 L | [1] | RING-PISTON (OIL) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | WHEN REUSING BODY ASSEMBLY 247-6123 ORDER PARTS MARKED J | |||
| L | WHEN USING NEW BODY ASSEMBLY 346-6616 ORDER PARTS MARKED L | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP42750128
229-2863: PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX7174-8131
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
S/N LHX7174-8131
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 2. | 164-4187 | [1] | RING-PISTON (INTERMEDIATE) | |
| 3. | 180-7350 | [1] | PIN-PISTON | |
| 4. | 197-9361 C | [1] | TUBE AS-OIL JET | |
| 5. | 224-3245 | [1] | ROD AS | |
| 5A. | 219-4458 | [2] | PIN-DOWEL | |
| 5B. | 213-3217 M | [4] | BOLT (M11X1.25X84-MM) | |
| 5C. | 229-6259 | [1] | BEARING | |
| 6. | 224-3246 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 232-3235 AB | BEARING-CONNECTING ROD (0.64-MM US) | |||
| 232-3236 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 247-6123 J | [1] | BODY AS-PISTON | |
| -OR- | ||||
| 346-6616 L | [1] | BODY AS-PISTON | ||
| 8. | 230-2569 J | [2] | RETAINER-PIN | |
| -OR- | ||||
| 250-2940 L | [2] | RETAINER-PIN | ||
| 9. | 247-6130 J | [1] | RING-PISTON-TOP | |
| -OR- | ||||
| 310-4188 L | [1] | RING-PISTON (TOP) | ||
| 10. | 238-0294 J | [1] | RING-PISTON (OIL) | |
| -OR- | ||||
| 306-4014 L | [1] | RING-PISTON (OIL) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | WHEN REUSING BODY ASSEMBLY 247-6123 ORDER PARTS MARKED J | |||
| L | WHEN USING NEW BODY ASSEMBLY 346-6616 ORDER PARTS MARKED L | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP42750129
229-2863: PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX8132-24230
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
S/N LHX8132-24230
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 2. | 164-4187 | [1] | RING-PISTON (INTERMEDIATE) | |
| 3. | 180-7350 | [1] | PIN-PISTON | |
| 4. | 276-4637 C | [1] | TUBE AS-OIL JET | |
| 5. | 224-3245 | [1] | ROD AS | |
| 5A. | 219-4458 | [2] | PIN-DOWEL | |
| 5B. | 213-3217 M | [4] | BOLT (M11X1.25X84-MM) | |
| 5C. | 229-6259 | [1] | BEARING | |
| 6. | 224-3246 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 232-3235 AB | BEARING-CONNECTING ROD (0.64-MM US) | |||
| 232-3236 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 247-6123 J | [1] | BODY AS-PISTON | |
| -OR- | ||||
| 346-6616 L | [1] | BODY AS-PISTON | ||
| 8. | 230-2569 J | [2] | RETAINER-PIN | |
| -OR- | ||||
| 250-2940 L | [2] | RETAINER-PIN | ||
| 9. | 247-6130 J | [1] | RING-PISTON-TOP | |
| -OR- | ||||
| 310-4188 L | [1] | RING-PISTON (TOP) | ||
| 10. | 238-0294 J | [1] | RING-PISTON (OIL) | |
| -OR- | ||||
| 306-4014 L | [1] | RING-PISTON (OIL) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | WHEN REUSING BODY ASSEMBLY 247-6123 ORDER PARTS MARKED J | |||
| L | WHEN USING NEW BODY ASSEMBLY 346-6616 ORDER PARTS MARKED L | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
