FUEL SYSTEM
TANK GP-FUELVALVE GP-CHECK
ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
FUEL SYSTEM
TANK GP-FUEL
#SEBP42750250
245-8412: TANK GP-FUEL
245-8412 TANK GP-FUEL
S/N MHG1-UP
S/N MHG1-UP
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 164-3417 | [1] | COVER | |
| 2. | 187-1679 | [1] | COVER | |
| 3. | 295-1950 | [1] | TANK AS-FUEL | |
| 4. | 1H-8128 | [1] | SEAL-O-RING | |
| 5. | 5H-6734 | [1] | SEAL-O-RING | |
| 6. | 7X-2553 M | [6] | BOLT (M16X2X40-MM) | |
| 7. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
| 9. | 9X-8257 | [6] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP42750251
245-8412: TANK GP-FUEL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 164-3417 | [1] | COVER | |
| 2. | 187-1679 | [1] | COVER | |
| 3. | 295-1950 | [1] | TANK AS-FUEL | |
| 4. | 1H-8128 | [1] | SEAL-O-RING | |
| 5. | 5H-6734 | [1] | SEAL-O-RING | |
| 6. | 324-3642 C | [1] | SENDER AS-FUEL LEVEL | |
| 317-9186 | [1] | KIT-REPAIR (FUEL LEVEL GAUGE) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6C-3060 | [1] | GASKET | ||
| 7. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
| 9. | 288-2738 CY | [1] | CAP GP-FUEL FILLER (EXTREME SERVICE, LOCKABLE) | |
| 10. | 9S-9334 C | [1] | PLUG | |
| 11. | 9P-7121 C | [1] | STRAINER-FUEL (FUEL TANK) | |
| 12. | 8T-4205 C | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 8T-4138 CM | [6] | BOLT (M6X1X20-MM) | |
| 14. | 7M-8485 C | [1] | SEAL-O-RING | |
| 15. | 1H-8306 C | [1] | SCREW-PURGE (1/2-20X1.625-IN) | |
| 16. | 3D-2824 | [1] | SEAL-O-RING | |
| 17. | 9S-8008 | [1] | PLUG (1-1/16-12-THD) | |
| 18. | 1U-8846 B | [1] | SEALANT-GASKET | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42750252
289-9465: TANK GP-FUEL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750253
318-5055: TANK GP-FUEL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9P-7121 | [1] | STRAINER-FUEL (FUEL TANK) | |
| 2. | 324-3642 | [1] | SENDER AS-FUEL LEVEL | |
| 6C-3060 | [1] | GASKET | ||
| 317-9186 | [1] | KIT-REPAIR (FUEL LEVEL GAUGE) | ||
| (INCLUDES RECEPTACLE KIT & PIN CONNECTORS) | ||||
| 3. | 295-1949 | [1] | TANK AS-FUEL | |
| 4. | 313-5618 | [1] | CAP AS-FUEL | |
| 317-1668 | [1] | BOOT-FUEL CAP | ||
| 101-8909 | [1] | CAP AS-FILLER (FUEL TANK) | ||
| 9X-8600 | [1] | SEAL-O-RING | ||
| 5. | 1H-8306 | [1] | SCREW-PURGE (1/2-20X1.625-IN) | |
| 6. | 7M-8485 | [1] | SEAL-O-RING | |
| 7. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 8. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 9S-9334 | [1] | PLUG | |
| 10. | 1U-8846 B | [1] | SEALANT-GASKET | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP42750254
332-2301: TANK GP-FUEL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750255
233-6742: VALVE GP-CHECK
233-6742 VALVE GP-CHECK -FUEL
S/N TXG1-UP; LHX1-UP
PART OF 235-3231, 351-9995 LINES GP-FUEL
S/N TXG1-UP; LHX1-UP
PART OF 235-3231, 351-9995 LINES GP-FUEL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750256
281-2725: VALVE GP-CHECK
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750257
3E-6328: ALARM GP
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750258
177-9953: ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N MHG1-UP
24-VOLT, 80-AMPERE
PART OF 236-6713 ALTERNATOR GP-CHARGING
S/N MHG1-UP
24-VOLT, 80-AMPERE
PART OF 236-6713 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 185-2643 | [1] | STATOR AS | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 J | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 J | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 J | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 199-7891 J | KIT-TERMINAL (ALTERNATOR AIR) | |||
| (INCLUDES INSULATORS, WASHERS, NUT, STEP NUT) | ||||
| 185-2655 | KIT-BEARING (ALTERNATOR) | |||
| (INCLUDES 2 BEARINGS) | ||||
| 199-8436 | KIT-TERMINAL (ALTERNATOR AIR) | |||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET, NUT) | ||||
| 185-2658 | KIT-HARDWARE (ALTERNATOR AIR) | |||
| (INCLUDES BOLTS) | ||||
| J | KIT MARKED J SEVICES PART(S) MARKED J | |||
#SEBP42750259
236-6713: ALTERNATOR GP-CHARGING
236-6713 ALTERNATOR GP-CHARGING
S/N MHG1-UP
PART OF 226-9644, 313-5820 INSTALLATION AR-ENGINE
S/N MHG1-UP
PART OF 226-9644, 313-5820 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 2. | 123-0791 | [1] | PULLEY (8-GROOVE) | |
| 3. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 5. | 8T-4835 | [1] | BOLT (1/2-13X2-IN) | |
| 6. | 8T-7930 M | [1] | BOLT (M12X1.75X160-MM) | |
| 7. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
