WORK TOOLS
BLADE GPGROUND ENGAGING TOOLS (G.E.T.)
PIN GP
SERVICE EQUIPMENT AND SUPPLIES
CAPS AND PLUGSCHARTS & FILMS
GASKET & SEAL KITS
WORK TOOLS
BLADE GP
#SEBP42790630
3G-9271: BLADE GP-STRAIGHT
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-9999 | [1] | BLADE AS-STRAIGHT | |
| 1A. | 1U-0008 | [4] | BRACKET | |
| 1B. | 1U-4588 | [1] | DEFLECTOR | |
| 1C. | 1U-0067 | [1] | BRACKET AS | |
| 1D. | 7J-5131 | [1] | TRUNNION | |
| 1E. | 1U-0094 | [2] | TRUNNION AS | |
| 1F. | 8P-9770 | [1] | PLATE | |
| 2. | 6J-6604 | [1] | PIN | |
| 3. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 4. | 6J-4655 | [1] | RETAINER | |
| 5. | 5J-4773 | [8] | BOLT-PLOW (3/4-10X2.5-IN) | |
| 6. | 2J-3506 | [8] | NUT-FULL (3/4-10-THD) | |
| 7. | 5P-8248 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 8. | 4T-3018 | [2] | SOLE (19-MM) | |
| -OR- | ||||
| 257-1855 | [2] | SOLE (25.4-MM) | ||
| 9. | 1U-0179 Y | [1] | EDGE GP-BIT & CUTTING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42790631
1U-0179: EDGE GP-BIT & CUTTING
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS#SEBP42790632
257-1851: EDGE-CUTTING
257-1851 EDGE-CUTTING
S/N BXG1-UP
S/N BXG1-UP
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP42790633
257-1852: EDGE-CUTTING
257-1852 EDGE-CUTTING
S/N BXG1-UP
S/N BXG1-UP
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP42790634
4T-6500: PIN GP
For full view, you need register
#SEBP42790635
9G-9288: CAP GP-PROTECTION
For full view, you need register
#SEBP42790636
273-0933: FILM GP
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | FILM-IDENTIFICATION (814F2, RH) | ||
| 2. | [2] | FILM-IDENTIFICATION (CAT) | ||
| 3. | [1] | FILM-IDENTIFICATION (814F2, LH) | ||
| 4. | 253-0861 | [2] | FILM-INFORMATION (CAT POWER, ACERT TECHNOLOGY) | |
| 5. | [1] | FILM-IDENTIFICATION (CATERPILLAR)(REAR) | ||
| 6. | 100-5621 | [1] | FILM-IDENTIFICATION (CATERPILLAR)(FRONT) | |
#SEBP42790637
273-0933: FILM GP
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | FILM-IDENTIFICATION (814F2, RH) | ||
| 2. | [2] | FILM-IDENTIFICATION (CAT) | ||
| 3. | [1] | FILM-IDENTIFICATION (814F2, LH) | ||
| 4. | 100-5621 C | [2] | FILM-IDENTIFICATION (CATERPILLAR)(FRONT) | |
| 5. | [1] | FILM-IDENTIFICATION (CATERPILLAR)(REAR) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP42790638
424-3549: KIT-GASKET
424-3549 KIT-GASKET -SINGLE CYLINDER HEAD
S/N BXG1-UP
CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. TURBO MOUNTING HARDWARE BOLTS, NUTS, STUDS, WASHERS. SPACERS.
FOR USE WITH @@@@@275-8772@@@@@
S/N BXG1-UP
CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. TURBO MOUNTING HARDWARE BOLTS, NUTS, STUDS, WASHERS. SPACERS.
FOR USE WITH @@@@@275-8772@@@@@
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1P-0451 | [1] | GASKET (TURBOCHARGER) | ||
| 7C-7431 | [1] | GASKET | ||
| 161-3411 | [6] | GASKET | ||
| 191-4457 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 219-2340 | [1] | GASKET | ||
| 187-1315 | [1] | GASKET AS (CYLINDER HEAD) | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 3S-9643 | [1] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | ||
| 4G-4972 | [1] | SEAL-O-RING | ||
| 6V-5063 | [1] | SEAL-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 214-7566 | [4] | SEAL-O-RING | ||
| 228-7089 | [3] | SEAL-O-RING | ||
| 228-7090 | [1] | SEAL-O-RING | ||
| 228-7096 | [2] | SEAL-O-RING | ||
| 238-5080 | [3] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 310-7255 | [6] | SEAL-O-RING | ||
| 310-7257 | [6] | SEAL-O-RING | ||
| 238-5082 | [2] | SEAL-O-RING | ||
| 268-3490 | [1] | SEAL-VALVE COVER | ||
| 285-4106 | [1] | SEAL-VALVE COVER | ||
| 418-6781 M | [4] | STUD-TAPERLOCK (M10X1.5X40-MM) | ||
| 214-7567 | [2] | SEAL-O-RING | ||
| 214-7568 | [14] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
#SEBP42790639
448-6946: KIT-GASKET
448-6946 KIT-GASKET -SINGLE CYLINDER HEAD
S/N BXG1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@275-8772@@@@@
S/N BXG1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@275-8772@@@@@
For full view, you need register
Parts for your 814F II WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1P-0451 | [1] | GASKET (TURBOCHARGER) | ||
| 161-3411 | [6] | GASKET | ||
| 191-4457 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 219-2340 | [1] | GASKET | ||
| 187-1315 | [1] | GASKET AS (CYLINDER HEAD) | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 3S-9643 | [1] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | ||
| 4G-4972 | [1] | SEAL-O-RING | ||
| 6V-6609 | [3] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7567 | [1] | SEAL-O-RING | ||
| 214-7568 | [10] | SEAL-O-RING | ||
| 228-7090 | [1] | SEAL-O-RING | ||
| 228-7096 | [2] | SEAL-O-RING | ||
| 238-5080 | [2] | SEAL-O-RING | ||
| 310-7255 | [6] | SEAL-O-RING | ||
| 310-7257 | [6] | SEAL-O-RING | ||
| 268-3490 | [1] | SEAL-VALVE COVER | ||
| 285-4106 | [1] | SEAL-VALVE COVER | ||
| 9X-8281 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
