ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP42820370
324-0692: WIRING GP-CHASSIS
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [13] | STRAP-CABLE | |
| 2. | 7K-1181 | [33] | STRAP-CABLE | |
| 3. | 118-6365 | [1] | PLATE AS | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 5. | 188-6252 | [1] | FILM-INSTRUCTION (HOOD TILT) | |
| 6. | 193-3973 | [23] | STRAP-CABLE | |
| 7. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR (CONNECTOR) | ||
| 8. | 324-0688 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 9. | 324-0689 | [1] | BRACKET | |
| 10. | 324-0691 | [1] | HARNESS AS-CHASSIS | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| E | SLEEVE-PLASTIC (20-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (80-CM) | |||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [20] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 11. | 324-0703 Y | [1] | FASTENER GP-WIRING HARNESS (TRANSMISSION) | |
| 12. | 327-4608 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 033-8248 | [4] | CLIP (LOOP) | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 132-5789 | [2] | CLIP (LADDER) | |
| 16. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 17. | 301-2980 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 18. | 3E-6769 | [1] | SEAL-O-RING | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 3P-3839 | [1] | GROMMET | |
| 21. | 4P-7581 | [4] | CLIP (LADDER) | |
| 22. | 7D-7233 | [6] | CLIP (LOOP) | |
| 23. | 8S-7583 | [1] | GROMMET | |
| 24. | 8T-4121 | [33] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 26. | 8T-4136 M | [19] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 33. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42820371
324-0692: WIRING GP-CHASSIS
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [1] | STRAP-CABLE | |
| 2. | 7K-1181 | [43] | STRAP-CABLE | |
| 3. | 118-6365 | [1] | PLATE AS | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 5. | 116-8247 C | [1] | PLATE-INSTRUCTION (HOOD TILT) | |
| 6. | 193-3973 | [23] | STRAP-CABLE | |
| 7. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR (CONNECTOR) | ||
| 8. | 324-0688 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 9. | 324-0689 | [1] | BRACKET | |
| 10. | 324-0691 | [1] | HARNESS AS-CHASSIS | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (80-CM) | |||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [20] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 11. | 324-0703 Y | [1] | FASTENER GP-WIRING HARNESS (TRANSMISSION) | |
| 12. | 327-4608 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 033-8248 | [4] | CLIP (LOOP) | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 132-5789 | [2] | CLIP (LADDER) | |
| 16. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 17. | 301-2980 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 18. | 3E-6769 | [1] | SEAL-O-RING | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 3P-3839 | [1] | GROMMET | |
| 21. | 4P-7581 | [4] | CLIP (LADDER) | |
| 22. | 7D-7233 C | [4] | CLIP (LOOP) | |
| 23. | 8S-7583 | [1] | GROMMET | |
| 24. | 8T-4121 C | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 CM | [7] | NUT (M10X1.5-THD) | |
| 26. | 8T-4136 CM | [18] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4137 CM | [6] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 33. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 34. | 139-1398 C | [2] | CLIP (LOOP) | |
| 35. | 4H-1225 | [1] | WASHER (11X22X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42820372
324-0692: WIRING GP-CHASSIS
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 7K-1181 C | [44] | STRAP-CABLE | |
| 3. | 118-6365 | [1] | PLATE AS | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 5. | 116-8247 | [1] | PLATE-INSTRUCTION (HOOD TILT) | |
| 6. | 204-2281 | [23] | STRAP-CABLE | |
| 7. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR (CONNECTOR) | ||
| 8. | 324-0688 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 9. | 324-0689 | [1] | BRACKET | |
| 10. | 365-6324 CY | [1] | HARNESS AS-CHASSIS (HYDRAULIC) | |
| 11. | 324-0703 Y | [1] | FASTENER GP-WIRING HARNESS (TRANSMISSION) | |
| 12. | 327-4608 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 033-8248 | [4] | CLIP (LOOP) | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 132-5789 | [2] | CLIP (LADDER) | |
| 16. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 17. | 301-2980 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 112-4550 E | SLEEVE (21-CM) | |||
| 18. | 3E-6769 | [1] | SEAL-O-RING | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 3P-3839 | [1] | GROMMET | |
| 21. | 4P-7581 | [4] | CLIP (LADDER) | |
| 22. | 7D-7233 | [4] | CLIP (LOOP) | |
| 23. | 8S-7583 | [1] | GROMMET | |
| 24. | 8T-4121 | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [7] | NUT (M10X1.5-THD) | |
| 26. | 8T-4136 M | [18] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 33. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 34. | 139-1398 | [2] | CLIP (LOOP) | |
| 35. | 4H-1225 | [1] | WASHER (11X22X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42820373
244-6524: WIRING GP-ELECTRIC CLUTCH
244-6524 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N M5G1-436
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
S/N M5G1-436
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(AXLE OIL COOLER) | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 191-7699 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 130-5300 | [1] | CLIP | |
| 5. | 147-0385 | [1] | CLIP | |
| 6. | 3E-9854 M | [1] | BOLT (M8X1.25X20-MM) | |
| 7. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP42820374
244-6524: WIRING GP-ELECTRIC CLUTCH
244-6524 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N M5G437-475
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
S/N M5G437-475
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP42820375
244-6524: WIRING GP-ELECTRIC CLUTCH
244-6524 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N M5G476-UP
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
S/N M5G476-UP
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP42820376
198-2714: WIRING GP-ENGINE
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [12] | STRAP-CABLE | |
| 2. | 4P-5918 | [1] | CLIP | |
| 4. | 198-2713 | [1] | HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE) | |
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 180-9340 | [60] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [77] | PLUG-SEAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, & WEDGE) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 5. | 206-1345 | [9] | STRAP-CABLE | |
| 6. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 135-5975 | [1] | GROMMET-WIRING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 4P-8134 | [1] | CLIP (LADDER) | |
| 8. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 9. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP42820377
241-0640: WIRING GP-ENGINE
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [15] | STRAP-CABLE | |
| 2. | 118-6878 | [1] | BRACKET AS | |
| 3. | 124-3019 | [2] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 5. | 164-3652 | [1] | ADAPTER | |
| 6. | 175-3244 | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA)(0.2-M) | ||
| 5P-6008 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M) | |||
| 8T-5677 D | SLEEVE (0.6-M) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 315-0629 | HARNESS AS-ENGINE | ||
| 8. | 247-4389 | [1] | CABLE AS | |
| 3L-6513 | [2] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 8C-0596 E | CABLE (2-GA)(70-CM) | |||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(6-CM) | |||
| 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 9. | 130-5300 | [5] | CLIP | |
| 10. | 132-5789 | [3] | CLIP (LADDER) | |
| 11. | 142-8545 M | [2] | BOLT (M16X2X20-MM) | |
| 12. | 149-9129 | [5] | CLIP (LOOP) | |
| 13. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| 15. | 3K-0360 | [1] | SEAL-O-RING | |
| 16. | 4N-9170 | [2] | CLIP (LOOP) | |
| 17. | 4P-7582 | [3] | CLIP (LADDER) | |
| 18. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 19. | 6V-1889 | [2] | CLIP (LOOP) | |
| 20. | 6V-3265 | [1] | CLIP | |
| 21. | 7J-0204 | [1] | SEAL-O-RING | |
| 22. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 24. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 25. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 26. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 27. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9X-8250 | [1] | CLIP | |
| 29. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 30. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 31. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 32. | 5P-7970 M | [2] | NUT (M8X1.25-THD) | |
| 33. | 4P-7581 | [1] | CLIP (LADDER) | |
| 34. | 3S-2093 | [1] | STRAP-CABLE | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42820378
241-0640: WIRING GP-ENGINE
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 7K-1181 | [15] | STRAP-CABLE | |
| 3. | 118-6878 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 124-3019 C | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 6. | 164-3652 | [1] | ADAPTER | |
| 7. | 175-3244 | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA)(0.2-M) | ||
| 5P-6008 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M) | |||
| 8T-5677 D | SLEEVE (0.6-M) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 193-9131 C | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 247-4389 | [1] | CABLE AS | |
| 10. | 315-0629 | [1] | HARNESS AS-ENGINE | |
| 11. | 130-5300 | [5] | CLIP | |
| 12. | 132-5789 | [3] | CLIP (LADDER) | |
| 13. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 14. | 142-8545 M | [2] | BOLT (M16X2X20-MM) | |
| 15. | 143-9392 CM | [1] | STUD (M8X1.25-THD) | |
| 16. | 149-9129 | [5] | CLIP (LOOP) | |
| 17. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 18. | 3J-1907 | [2] | SEAL-O-RING | |
| 19. | 3K-0360 | [1] | SEAL-O-RING | |
| 20. | 4N-9170 | [2] | CLIP (LOOP) | |
| 21. | 4P-7581 | [1] | CLIP (LADDER) | |
| 22. | 4P-7582 | [3] | CLIP (LADDER) | |
| 23. | 5C-7261 CM | [3] | NUT (M8X1.25-THD) | |
| 24. | 6V-1889 C | [1] | CLIP (LOOP) | |
| 25. | 6V-3265 | [1] | CLIP | |
| 26. | 7J-0204 | [1] | SEAL-O-RING | |
| 27. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 CM | [1] | NUT (M10X1.5-THD) | |
| 29. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 30. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 32. | 8T-4191 CM | [1] | BOLT (M10X1.5X16-MM) | |
| 33. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 34. | 8T-4224 C | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 9X-8250 | [1] | CLIP | |
| 36. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42820379
324-0696: WIRING GP-ENGINE
For full view, you need register
Parts for your IT62H INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 4P-5918 | [1] | CLIP | |
| 3. | 7K-1181 | [19] | STRAP-CABLE | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 175-3244 | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-6008 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M) | |||
| 8T-5677 D | SLEEVE (0.6-M) | |||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 204-2281 | [3] | STRAP-CABLE | |
| 7. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 8. | 365-7504 | [1] | CABLE AS | |
| 9. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL) | |
| 10. | 272-6537 | [1] | BRACKET AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 11. | 324-0695 | [1] | HARNESS AS-ENGINE | |
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8737 | [62] | PLUG-SEAL | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDESE RECEPTACLE AS & WEDGE) | ||||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 9X-3402 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 131-1479 | [1] | TERMINAL AS | ||
| 144-1636 | [16] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 212-3553 | [1] | TERMINAL AS | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 240-7874 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 274-3780 | [1] | CAP-SEAL | ||
| 12. | 324-0697 | [1] | BRACKET AS | |
| 13. | 324-0698 | [1] | BRACKET AS | |
| 14. | 324-0701 | [1] | CABLE AS | |
| 3L-6513 | [1] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 8C-3056 E | CABLE (2-GA, RED)(74-CM) | |||
| 8T-8827 | [1] | BOOT (RED) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 231-4476 | [1] | TERMINAL AS (DUAL HEAT) | ||
| 125-7876 E | [1] | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | ||
| 15. | 033-8248 | [2] | CLIP (LOOP) | |
| 16. | 124-1479 | [3] | CLIP | |
| 17. | 125-8797 | [2] | CLIP (SLOT) | |
| 18. | 130-5300 | [5] | CLIP | |
| 19. | 132-5789 | [2] | CLIP (LADDER) | |
| 20. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 21. | 142-8545 M | [3] | BOLT (M16X2X20-MM) | |
| 22. | 147-0385 | [1] | CLIP | |
| 23. | 149-9129 | [1] | CLIP (LOOP) | |
| 24. | 3J-1907 | [2] | SEAL-O-RING | |
| 25. | 3K-0360 | [1] | SEAL-O-RING | |
| 26. | 4P-7581 | [3] | CLIP (LADDER) | |
| 27. | 4P-7582 | [2] | CLIP (LADDER) | |
| 28. | 4P-8134 | [2] | CLIP (LADDER) | |
| 29. | 4S-1962 | [2] | CLIP (LOOP) | |
| 30. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 31. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 32. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 35. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 36. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 37. | 9X-8257 | [3] | WASHER (17.5X30X3.5-MM THK) | |
| 38. | 9X-7378 | [1] | SEAL-O-RING | |
| 39. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(AIR CONDITIONER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 40. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 41. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog IT62H :
Truck sale:
CATERPILLAR IT62H 2006
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
$69,500 USD
