AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

311-3170 PUMP GP-AIR -VARIABLE PITCH FAN S/N M5G1-UP PART OF 311-0065 LINES GP-HYDRAULIC FAN IT62H INTEGRATED TOOLCARRIER


HYDRAULIC SYSTEM
PUMP GP
TANK GP
VALVE GP-CONTROL

INTEGRATED TOOLCARRIER IT62H INTEGRATED TOOLCARRIER M5G
 IT62H Integrated Toolcarrier M5G00001-UP (MACHINE) POWERED BY C7 Engine SEBP4282 IT62H M5G   (2005)

HYDRAULIC SYSTEM

PUMP GP
PUMP & MTG GP-HYDRAULIC
246-2054 PUMP & MTG GP-HYDRAULIC
PUMP & MTG GP-HYDRAULIC
246-2054 PUMP & MTG GP-HYDRAULIC
PUMP GP-AIR
311-3170 PUMP GP-AIR
PUMP GP-PISTON
254-4108 PUMP GP-PISTON
PUMP GP-PISTON
254-5146 PUMP GP-PISTON
PUMP GP-PISTON
292-8767 PUMP GP-PISTON
 

#SEBP42820640
 

311-3170: PUMP GP-AIR

311-3170 PUMP GP-AIR -VARIABLE PITCH FAN
S/N M5G1-UP
PART OF 311-0065 LINES GP-HYDRAULIC FAN
i03257694 SEBP4282
3113170 PUMP GP-AIR Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 8T-9658 [3] SPACER (8.2X12.7X25.4-MM THK)  
3. 155-0576 [6] MOUNT-ISOLATION  
4. 321-8167 [1] BRACKET AS  
  6V-8224 M [1] NUT-WELD (M10X1.5-THD)  
5. 321-8168 [1] BRACKET AS  
6. 321-8191 [1] PUMP AS-AIR (VARIABLE PITCH FAN)  
7. 130-5300 [2] CLIP  
8. 102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
9. 0A-2926 [1] FITTING  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
13. 331-3257 [1] VALVE AS  
  M   METRIC PART
 

#SEBP42820641
 

254-4108: PUMP GP-PISTON

254-4108 PUMP GP-PISTON -IMPLEMENT, PILOT
S/N M5G1-251
PART OF 246-2054 PUMP & MTG GP-HYDRAULIC
i02219993 SEBP4282
2544108 PUMP GP-PISTON Parts scheme 2544108 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4215 [1] SPACER  
2. 7Y-4944 [1] RING-RETAINING  
3. 096-4389 [9] SPRING  
4. 129-7853 [1] PLATE  
5. 129-7921 [1] RING-RETAINING  
6. 129-7925 [2] SEAL-LIP TYPE  
7. 129-7927 [1] BEARING  
8. 150-5782 [2] COVER  
9. 173-3427 [1] GUIDE-BALL  
10. 192-0573 [2] PIN-DOWEL  
11. 245-3862 [1] CASE-SEAL  
12. 254-6549 [1] BODY AS  
  124-1555 [2] PLUG  
13. 254-6555 [1] BLOCK  
14. 256-0083 [1] BARREL AS-PUMP  
15. 256-7485 [1] PISTON AS  
16. 4B-4158 [4] SCREW-DRIVE (NO 4X0.25-IN)  
17. 263-7474 [1] SET-BEARING  
18. 272-5672 [1] SHAFT (14-TEETH)  
19. 274-1262 [1] SEAL-O-RING  
20. 254-6561 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
21. 094-1875 [3] DOWEL  
22. 094-1883 [1] PLUG  
23. 095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
24. 095-0946 [1] RING-RETAINING  
25. 8J-0101 [1] PLATE-NOTICE (HYDRAULIC OIL FILL)  
26. 129-7979 [2] DOWEL  
27. 189-9763 [1] SEAL-O-RING  
28. 193-1736 [2] SEAL-O-RING  
29. 236-6919 [1] SEAL-O-RING  
30. 242-6801 [1] SWASHPLATE AS  
  094-1875 [1] DOWEL  
  173-3428 [1] BUSHING  
  242-6803 [2] PIN-DOWEL  
31. 242-6804 [2] BEARING (ROCKER)  
32. 3D-2824 [2] SEAL-O-RING  
33. 3J-1907 [1] SEAL-O-RING  
34. 3K-0360 [3] SEAL-O-RING  
35. 4I-1022 [1] ORIFICE  
36. 6V-3907 [1] SEAL-O-RING  
37. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
38. 8T-4140 M [4] BOLT (M16X2X60-MM)  
39. 9S-4183 [2] PLUG (1-1/16-12-THD)  
40. 9S-4185 [2] PLUG (3/4-16-THD)  
41. 9S-8004 [1] PLUG (9/16-18-THD)  
42. 9S-8005 [1] PLUG (3/4-16-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42820642
 

254-5146: PUMP GP-PISTON

254-5146 PUMP GP-PISTON -BRAKE, HYDRAULIC FAN
S/N M5G1-UP
PART OF 237-0954 PUMP & MTG GP-BRAKE & HYD FAN
i02305771 SEBP4282
2545146 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-5504 Y [1] ROTATING GP-PUMP  
2. 168-7861 [1] PISTON-ACTUATOR  
3. 259-5507 [1] ROD-PISTON  
4. 259-5509 [1] SWASHPLATE  
5. 233-6306 [1] SHAFT-DRIVE  
6. 198-5351 [1] PLUG  
7. 194-9472 [1] SPRING  
8. 191-7582 B [1] SHIM (2.5-MM THK)  
9. 194-9473 [1] RING  
10. 155-9125 [1] BEARING AS-ROLLER  
11. 191-7583 [1] BEARING-TAPERED  
12. 194-9474 [2] BEARING-CRADLE  
13. 155-9127 [1] SEAL  
14. 133-6578 [1] SEAL-O-RING  
15. 8T-7525 [1] SEAL-O-RING  
16. 168-3504 [1] SEAL  
17. 8T-9597 [1] RING-RETAINING  
18. 8T-9515 M [4] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
19. 9S-8005 [1] PLUG (3/4-16-THD)  
20. 120-4394 [1] PLUG-BREAK OFF  
21. 099-3047 [1] DOWEL  
22. 3K-0360 [1] SEAL-O-RING  
23. 207-0697 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
24. 155-9133 [1] KEY  
25. 9S-8002 [1] PLUG (7/16-20-THD)  
26. 3J-7354 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42820643
 

292-8767: PUMP GP-PISTON

292-8767 PUMP GP-PISTON -IMPLEMENT, PILOT
S/N M5G252-UP
PART OF 246-2054 PUMP & MTG GP-HYDRAULIC
Type 1
i02746735 SEBP4282
2928767 PUMP GP-PISTON Parts scheme 2928767 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4215 [1] SPACER  
3. 096-4389 [9] SPRING  
4. 129-7853 [1] PLATE  
5. 129-7921 [1] RING-RETAINING  
6. 341-2862 [2] SEAL-LIP TYPE  
7. 129-7927 [1] BEARING  
8. 150-5782 [2] COVER  
9. 173-3427 [1] GUIDE-BALL  
10. 192-0573 [2] PIN-DOWEL  
11. 254-6555 [1] BLOCK  
12. 256-0083 [1] BARREL AS-PUMP  
13. 256-7485 [1] PISTON AS  
14. 263-7474 [1] SET-BEARING  
15. 272-5672 [1] SHAFT  
16. 292-3264 [1] SEAL-O-RING  
17. 292-8769 [1] BODY AS-PUMP  
  124-1555 [2] PLUG  
18. 292-8771 [1] CASE  
19. 298-8919 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
20. 067-3161 [1] RING-RETAINING  
21. 094-1875 [3] DOWEL  
22. 094-1882 [1] PLUG  
23. 094-1883 [1] PLUG  
24. 095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
25. 095-0946 [1] RING-RETAINING  
26. 129-7979 [2] DOWEL  
27. 189-9763 [1] SEAL-O-RING  
28. 193-1736 [2] SEAL-O-RING  
29. 236-6919 [1] SEAL-O-RING  
30. 242-6801 [1] SWASHPLATE AS  
  094-1875 [1] DOWEL  
  173-3428 [1] BUSHING  
  242-6803 [2] PIN-DOWEL  
31. 242-6804 [2] BEARING  
32. 3D-2824 [2] SEAL-O-RING  
33. 3J-1907 [1] SEAL-O-RING  
34. 3K-0360 [3] SEAL-O-RING  
36. 4I-1022 [1] ORIFICE  
37. 6V-3907 [1] SEAL-O-RING  
38. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
39. 8T-4140 M [4] BOLT (M16X2X60-MM)  
40. 9S-4183 [2] PLUG (1-1/16-12-THD)  
41. 9S-4185 [2] PLUG (3/4-16-THD)  
42. 9S-8004 [1] PLUG (9/16-18-THD)  
43. 9S-8005 [1] PLUG (3/4-16-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42820644
 

292-8767: PUMP GP-PISTON

292-8767 PUMP GP-PISTON -IMPLEMENT, PILOT
S/N M5G252-UP
PART OF 246-2054 PUMP & MTG GP-HYDRAULIC
Type 2
i04986831 SEBP4282
2928767 PUMP GP-PISTON Parts scheme 2928767 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4215 [1] SPACER  
3. 096-4389 [9] SPRING  
4. 129-7853 [1] PLATE  
5. 129-7921 [1] RING-RETAINING  
6. 341-2862 [2] SEAL-LIP TYPE  
7. 129-7927 [1] BEARING  
8. 150-5782 [2] COVER  
9. 173-3427 [1] GUIDE-BALL  
11. 254-6555 [1] BLOCK  
12. 256-0083 [1] BARREL AS-PUMP  
13. 256-7485 [1] PISTON AS  
14. 263-7474 [1] SET-BEARING  
15. 272-5672 [1] SHAFT  
16. 292-3264 [1] SEAL-O-RING  
17. 358-2556 C [1] BODY AS (PUMP)  
  094-1875 [2] DOWEL  
  124-1555 [2] PLUG  
  129-7979 [2] DOWEL  
  192-0573 [2] PIN-DOWEL  
18. 292-8771 [1] CASE  
19. 366-6195 CY [1] HEAD GP-PUMP (PRESSURE, FLOW COMPENSATOR)  
20. 067-3161 [1] RING-RETAINING  
21. 094-1875 C [1] DOWEL  
22. 094-1882 [1] PLUG  
23. 094-1883 [1] PLUG  
24. 095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
25. 095-0946 [1] RING-RETAINING  
27. 189-9763 [1] SEAL-O-RING  
28. 193-1736 [2] SEAL-O-RING  
29. 236-6919 [1] SEAL-O-RING  
30. 373-9516 [1] SWASHPLATE AS  
  094-1875 [1] DOWEL  
  173-3428 [1] BUSHING  
  242-6803 [2] PIN-DOWEL  
31. 242-6804 [2] BEARING  
32. 3D-2824 [2] SEAL-O-RING  
33. 3J-1907 [1] SEAL-O-RING  
34. 3K-0360 [3] SEAL-O-RING  
36. 4I-1022 [1] ORIFICE  
37. 6V-3907 [1] SEAL-O-RING  
38. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
39. 8T-4140 M [4] BOLT (M16X2X60-MM)  
40. 9S-4183 [2] PLUG (1-1/16-12-THD)  
41. 9S-4185 [2] PLUG (3/4-16-THD)  
42. 9S-8004 [1] PLUG (9/16-18-THD)  
43. 9S-8005 [1] PLUG (3/4-16-THD)  
44. 373-9518 [2] BEARING AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42820645
 

259-5504: ROTATING GP-PUMP

259-5504 ROTATING GP-PUMP -BRAKE, HYDRAULIC FAN
S/N M5G1-UP
PART OF 254-5146 PUMP GP-PISTON
i02305775 SEBP4282
2595504 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-5501 [9] PISTON AS  
2. 259-5502 [1] BARREL  
3. 266-7837 [1] PLATE  
4. 155-9116 [1] GUIDE-BALL  
5. 155-9117 [1] SPRING  
6. 194-9479 [3] PIN  
7. 194-9480 [1] RING-RETAINING  
8. 194-9481 [1] DISC-THRUST  
9. 194-9478 [1] PLATE-PORT  
 

#SEBP42820646
 

237-2742: TANK GP-HYDRAULIC

237-2742 TANK GP-HYDRAULIC
S/N M5G1-475
PART OF 251-6368 HYDRAULIC AR-2 VALVE
i02207630 SEBP4282
2372742 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4578 [2] FLANGE-HALF (STANDARD PRESSURE)  
2. 1P-4579 [2] FLANGE-HALF  
3. 1P-4584 [2] FLANGE-HALF  
4. 275-8880 [1] FLANGE  
5. 7X-0591 [4] WASHER-HARD (17X29X3-MM THK)  
6. 8C-3206 [2] FLANGE-HALF  
7. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
9. 8T-4193 M [4] BOLT (M16X2X50-MM)  
10. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
11. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
13. 5D-1911 [1] COVER-HYDRAULIC CAP  
14. 5D-7927 [1] STRAINER AS-OIL (HYDRAULIC TANK FILL)  
15. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
16. 9M-7394 [1] LEVER  
17. 9T-9226 [2] PLATE  
18. 9T-9227 [2] SCREEN AS (HYDRAULIC TANK)  
19. 237-2743 [1] TANK AS-HYDRAULIC  
20. 244-0405 [1] COVER AS  
21. 244-0420 [1] GASKET  
22. 260-8636 [1] GAUGE-LIQUID LEVEL (SIGHT GLASS)  
23. 1L-5072 [1] DOWEL  
24. 2D-4202 [1] PLATE  
25. 2J-7761 [1] RING-RETAINING  
26. 6H-9361 [1] RING-RETAINING  
27. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
28. 8T-2275 [1] BALL  
29. 8T-4201 M [24] BOLT-LOCKING (M10X1.5X20-MM)  
30. 9H-6454 [1] GASKET (HYDRAULIC TANK)  
31. [1] PLUG AS  
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
32. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 299-7996 [1] PLATE  
34. 299-7997 [1] SCREEN  
35. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
  M   METRIC PART
 

#SEBP42820647
 

340-5659: TANK GP-HYDRAULIC

340-5659 TANK GP-HYDRAULIC
S/N M5G476-UP
166-L (43.9-US GAL)
PART OF 251-6368 HYDRAULIC AR-2 VALVE
i03643660 SEBP4282
3405659 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4578 [2] FLANGE-HALF  
2. 1P-4579 [2] FLANGE-HALF  
3. 1P-4584 [2] FLANGE-HALF  
4. 7X-0591 [4] WASHER-HARD (17X29X3-MM THK)  
5. 8C-3206 [2] FLANGE-HALF  
6. 8T-4121 [30] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
8. 8T-4193 M [4] BOLT (M16X2X50-MM)  
9. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
10. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 2D-4202 [1] PLATE  
12. 5D-1911 [1] COVER-HYDRAULIC CAP  
13. 5D-7927 [1] STRAINER AS-OIL (HYDRAULIC TANK FILL)  
  5F-3488 [1] END-STRAINER  
14. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
15. 9M-7394 [1] LEVER  
16. 9T-9226 [2] PLATE  
17. 9T-9227 [2] SCREEN AS (HYDRAULIC TANK)  
18. 260-8636 [1] GAUGE-LIQUID LEVEL (SIGHT GLASS)(HYDRAULIC TANK OIL)  
19. 262-4071 [1] COVER AS-TANK  
20. 262-9920 [1] GASKET  
21. 275-8880 [1] FLANGE  
22. 299-7996 [1] PLATE  
23. 299-7997 [1] SCREEN  
24. 340-5660 [1] TANK AS-HYDRAULIC  
25. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
26. [1] PLUG AS  
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
27. 1L-5072 [1] DOWEL  
28. 2J-7761 [1] RING-RETAINING  
29. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
30. 6H-9361 [1] RING-RETAINING  
31. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
32. 8T-2275 [1] BALL  
33. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
34. 8T-4136 M [22] BOLT (M10X1.5X25-MM)  
35. 9H-6454 [1] GASKET  
  M   METRIC PART
 

#SEBP42820648
 

251-6394: VALVE & MTG GP-MAIN CONTROL

251-6394 VALVE & MTG GP-MAIN CONTROL -2-FUNCTION
S/N M5G1-278
PART OF 251-6368 HYDRAULIC AR-2 VALVE
i02207627 SEBP4282
2516394 VALVE & MTG GP-MAIN CONTROL Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 148-8424 [1] TEE AS  
  6V-8397 [1] SEAL-O-RING  
  8T-8902 [1] ADAPTER-TEE  
3. 165-6365 [1] FITTING AS  
  3J-1907 [1] SEAL-O-RING  
  7W-7381 [1] FITTING-OUTLET  
4. 241-2628 [1] BRACKET AS  
  7T-1099 [2] LINK  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
5. 244-6625 [1] ADAPTER-SPECIAL  
6. 245-2975 Y [1] ACCUMULATOR GP-HYDRAULIC (CHARGED)(DEAD ENGINE, LIFT ARM LOWER)  
7. 249-0787 I [1] HOSE AS  
8. 256-6933 Y [1] VALVE GP-MAIN CONTROL (2-FUNCTION)  
9. 259-1502 [1] BLOCK  
10. 259-1971 [1] TUBE AS  
11. 259-2092 [1] TUBE AS  
13. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
14. 148-8367 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
15. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
16. 148-8435 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  6V-8781 [1] TEE  
17. 150-3033 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  8T-0164 [1] ELBOW  
18. 150-4044 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-1779 [1] CONNECTOR  
19. 152-3411 [1] ELBOW  
20. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
21. 276-9072 Y [1] VALVE GP-SHUTTLE  
22. 3D-2824 [1] SEAL-O-RING  
23. 3J-1907 [1] SEAL-O-RING  
24. 5P-1076 [3] WASHER-HARD (13.5X30X4-MM THK)  
25. 5P-4295 [1] CLIP  
26. 6V-0852 [1] CAP-DUST  
27. 6V-8397 [3] SEAL-O-RING  
28. 6V-8398 [1] SEAL-O-RING  
29. 6V-9829 [2] CAP (ORFS)  
30. 7X-2552 M [4] BOLT (M16X2X30-MM)  
31. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
33. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
34. 8T-4183 M [3] BOLT (M12X1.75X40-MM)  
35. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
36. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42820649
 

251-6394: VALVE & MTG GP-MAIN CONTROL

251-6394 VALVE & MTG GP-MAIN CONTROL -2-FUNCTION
S/N M5G279-475
PART OF 251-6368 HYDRAULIC AR-2 VALVE
i03102349 SEBP4282
2516394 VALVE & MTG GP-MAIN CONTROL Parts scheme
  For full view, you need register

Parts for your IT62H INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 148-8424 [1] TEE AS  
  6V-8397 [1] SEAL-O-RING  
  8T-8902 [1] ADAPTER-TEE  
3. 165-6365 [1] FITTING AS  
  3J-1907 [1] SEAL-O-RING  
  7W-7381 [1] FITTING-OUTLET  
4. 241-2628 [1] BRACKET AS  
  7T-1099 [2] LINK  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
5. 244-6625 [1] ADAPTER-SPECIAL  
6. 245-2975 Y [1] ACCUMULATOR GP-HYDRAULIC (CHARGED)(DEAD ENGINE, LIFT ARM LOWER)  
7. 249-0787 I [1] HOSE AS  
8. 256-6933 Y [1] VALVE GP-MAIN CONTROL (2-FUNCTION)  
9. 259-1502 [1] BLOCK  
10. 259-1971 [1] TUBE AS  
11. 259-2092 [1] TUBE AS  
13. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
14. 148-8367 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
15. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
16. 148-8435 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  6V-8781 [1] TEE  
17. 150-3033 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  8T-0164 [1] ELBOW  
18. 150-4044 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-1779 [1] CONNECTOR  
19. 152-3411 [1] ELBOW  
20. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
21. 150-4043 C [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
22. 3D-2824 [1] SEAL-O-RING  
23. 3J-1907 [1] SEAL-O-RING  
24. 5P-1076 [3] WASHER-HARD (13.5X30X4-MM THK)  
25. 5P-4295 [1] CLIP  
26. 6V-0852 [1] CAP-DUST  
27. 6V-8397 [3] SEAL-O-RING  
28. 6V-8398 [1] SEAL-O-RING  
29. 6V-9829 [2] CAP (ORFS)  
30. 7X-2552 M [4] BOLT (M16X2X30-MM)  
31. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
33. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
34. 8T-4183 M [3] BOLT (M12X1.75X40-MM)  
35. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
36. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog IT62H :

PUMP & MTG GP-HYDRAULIC
246-2054 PUMP & MTG GP-HYDRAULIC
PUMP & MTG GP-HYDRAULIC
246-2054 PUMP & MTG GP-HYDRAULIC
PUMP & MTG GP-BRAKE & HYD FAN
237-0954 PUMP & MTG GP-BRAKE & HYD FAN
MOUNTING GP-HYDRAULIC TANK
237-0960 MOUNTING GP-HYDRAULIC TANK
MANIFOLD GP-VALVE
271-9248 MANIFOLD GP-VALVE
MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE
MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE
MANIFOLD GP-CONTROL
366-9955 MANIFOLD GP-CONTROL
PUMP GP-PISTON
254-4108 PUMP GP-PISTON
PUMP GP-PISTON
254-5146 PUMP GP-PISTON
PUMP GP-PISTON
292-8767 PUMP GP-PISTON
PUMP GP-PISTON
292-8767 PUMP GP-PISTON
ROTATING GP-PUMP
259-5504 ROTATING GP-PUMP
TANK GP-HYDRAULIC
237-2742 TANK GP-HYDRAULIC
TANK GP-HYDRAULIC
340-5659 TANK GP-HYDRAULIC
VALVE & MTG GP-MAIN CONTROL
251-6394 VALVE & MTG GP-MAIN CONTROL

Truck sale:

CATERPILLAR IT62H 2006
 
CATERPILLAR IT62H 2006
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR IT62H 2007
$69,500 USD 
CATERPILLAR IT62H 2007
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
KELLY TRACTOR
United States
2008 CAT IT62H
USD $70,850 
2008 CAT IT62H

Elite Equipment Pros, LLC
Parker, Colorado 80138
2007 CAT IT62H
USD $69,500 
2007 CAT IT62H

Kelly Tractor Co
Miami, Florida
 
USD $74,500 
2006 CAT IT62H

A. Montano Co. Inc.
Saugerties, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.