OPERATOR STATION
CAB GPCANOPY GP
AIR CONDITIONER GP
CONTROL GP-ELECTROHYDRAULIC
OPERATOR STATION
CAB GP
#SEBP42831010
243-1081: CAB AR-ENCLOSED ROPS
243-1081 CAB AR-ENCLOSED ROPS
S/N M3G1-UP
PART OF 243-1078 OPERATOR AR-ENCLOSED ROPS
S/N M3G1-UP
PART OF 243-1078 OPERATOR AR-ENCLOSED ROPS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 243-1089 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (2-FUNCTION) | ||
| 265-6695 Y | [1] | CONTROL GP-FOOT BRAKE | ||
| 244-2747 Y | [1] | CONTROL GP-PARKING BRAKE | ||
| 219-7619 Y | [1] | CONTROL GP-STEERING (COMMAND CONTROL STEERING) | ||
| 171-8888 Y | [1] | DUCT & FILTER GP-CAB AIR | ||
| 232-1397 Y | [1] | FLOOR GP-SOUND SUPPRESSION (CAB) | ||
| 243-1088 Y | [1] | HEATER & AIR CONDITIONER GP | ||
| S/N M3G542-UP | ||||
| 257-2008 Y | [1] | INSTALLATION GP-RADIO | ||
| 235-8559 Y | [1] | LIGHTING GP-FLOOD (CAB FRONT, REAR) | ||
| 232-1394 Y | [1] | LINER GP-CAB (ENCLOSED ROPS) | ||
| 192-7049 Y | [1] | MODULE GP-SPEEDOMETER & TACH | ||
| 171-8881 Y | [1] | PANEL GP-INSTRUMENT (UPPER) | ||
| S/N M3G1-492 | ||||
| 318-1469 Y | [1] | PANEL GP-INSTRUMENT (UPPER) | ||
| S/N M3G493-UP | ||||
| 245-6458 Y | [1] | PANEL GP-INSTRUMENT (LOWER) | ||
| 207-1759 Y | [1] | PEDAL GP-GOVERNOR | ||
| 331-2879 Y | [1] | ROOF GP-CAB | ||
| S/N M3G542-UP | ||||
| 243-1083 Y | [1] | ROPS GP-ENCLOSED | ||
| 174-3624 Y | [1] | SEAT GP-SUSPENSION | ||
| 243-1090 Y | [1] | SUPPORT GP-HYDRAULIC CONTROL (REAR) | ||
| 232-1396 Y | [1] | SUPPRESSION GP-CAB SOUND (FRONT) | ||
| 234-9553 Y | [1] | SUPPRESSION GP-CAB SOUND (REAR) | ||
| 197-6475 Y | [1] | SWITCH GP-DIMMER (ROADING) | ||
| S/N M3G542-UP | ||||
| 334-0946 Y | [1] | SWITCH GP-SIGNAL (TURN) | ||
| S/N M3G542-UP | ||||
| 334-1570 Y | [1] | VISOR GP-CAB | ||
| S/N M3G542-UP | ||||
| 257-2016 Y | [1] | WIPER GP-WINDOW | ||
| 237-4910 Y | [1] | WIRING GP-CAB | ||
| 117-1410 | [1] | SEALING GP-GLASS | ||
| 119-0781 B | [1] | ADHESIVE | ||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42831011
258-1552: CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 243-1089 Y | [1] | CONTROL GP-ELECTROHYDRAULIC (2-FUNCTION) | ||
| 265-6695 Y | [1] | CONTROL GP-FOOT BRAKE | ||
| 244-2747 Y | [1] | CONTROL GP-PARKING BRAKE | ||
| 141-8802 Y | [1] | CONTROL GP-STEERING (HMU) | ||
| Y | [1] | CONTROL GP-TRANSMISSION | ||
| 204-3664 Y | [1] | DUCT GP-CAB AIR | ||
| 326-4215 Y | [1] | GUARD GP-VANDALISM (INSTRUMENT PANEL) | ||
| 235-8559 Y | [1] | LIGHTING GP-FLOOD (CAB FRONT, REAR) | ||
| 263-0044 Y | [1] | LINER GP-CAB (OPEN ROPS) | ||
| 109-8203 Y | [1] | MIRROR GP-REAR VIEW (INTERIOR) | ||
| S/N M3G542-UP | ||||
| 192-7049 Y | [1] | MODULE GP-SPEEDOMETER & TACH | ||
| 326-4187 Y | [1] | PANEL GP-INSTRUMENT | ||
| 245-6458 Y | [1] | PANEL GP-INSTRUMENT (LOWER) | ||
| 207-1759 Y | [1] | PEDAL GP-GOVERNOR | ||
| 331-2879 Y | [1] | ROOF GP-CAB | ||
| S/N M3G542-UP | ||||
| 261-2951 Y | [1] | ROPS GP-OPEN | ||
| 204-4492 Y | [1] | SEAT GP-SUSPENSION | ||
| 243-1090 Y | [1] | SUPPORT GP-HYDRAULIC CONTROL (REAR) | ||
| 197-6475 Y | [1] | SWITCH GP-DIMMER (ROADING) | ||
| S/N M3G542-UP | ||||
| 253-3951 Y | [1] | SWITCH GP-SIGNAL (TURN) | ||
| S/N M3G542-UP | ||||
| 334-1570 Y | [1] | VISOR GP-CAB | ||
| S/N M3G542-UP | ||||
| 262-9187 Y | [1] | WIRING GP-OPEN ROPS (HMU) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42831012
163-0872: COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
S/N M3G542-UP
PART OF 237-4857 COMPRESSOR GP-REFRIGERANT
S/N M3G542-UP
PART OF 237-4857 COMPRESSOR GP-REFRIGERANT
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS#SEBP42831013
237-4857: COMPRESSOR GP-REFRIGERANT
237-4857 COMPRESSOR GP-REFRIGERANT
S/N M3G542-UP
PART OF 243-6623 AIR CONDITIONER AR, 237-3995 INSTALLATION AR-ENGINE
S/N M3G542-UP
PART OF 243-6623 AIR CONDITIONER AR, 237-3995 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-0872 Y | [1] | COMPRESSOR GP-REFRIGERANT | |
| 2. | 192-1563 Y | [2] | IDLER GP-BELT (ALTERNATOR, REFRIGERANT COMPR) | |
| 3. | 253-4531 | [1] | BELT-SERPENTINE (ALTERNATOR, A/C COMPRESSOR) | |
| 4. | 7X-2538 M | [4] | BOLT (M8X1.25X100-MM) | |
| 5. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42831014
394-9671: COMPRESSOR GP-REFRIGERANT
394-9671 COMPRESSOR GP-REFRIGERANT
S/N M3G1-UP
FIELD REPLACEMENT FOR @@@@@163-0872@@@@@
S/N M3G1-UP
FIELD REPLACEMENT FOR @@@@@163-0872@@@@@
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 314-4018 | [1] | VALVE AS-PRESSURE RELIEF (REFRIGERANT COMPRESSOR) | |
| 3. | 7T-4532 | [1] | PLUG AS | |
| 4. | 9X-7385 | [2] | SEAL-O-RING | |
| 5. | 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
#SEBP42831015
244-4978: CONDENSER & MTG GP-REFRIGERANT
244-4978 CONDENSER & MTG GP-REFRIGERANT
S/N M3G542-UP
PART OF 243-6623 AIR CONDITIONER AR, 237-4933 CHASSIS AR
S/N M3G542-UP
PART OF 243-6623 AIR CONDITIONER AR, 237-4933 CHASSIS AR
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 2. | 245-0766 | [1] | BRACKET | |
| 3. | 244-8839 | [1] | CORE AS-CONDENSER (REFRIGERANT) | |
| 4. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 5. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 6. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 7. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#SEBP42831016
243-1089: CONTROL GP-ELECTROHYDRAULIC
243-1089 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N M3G1-305
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
S/N M3G1-305
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 243-3166 Y | [1] | CONTROL GP-HANDLE (TILT) | |
| 6A. | 243-3166 Y | [1] | CONTROL GP-HANDLE (LIFT) | |
| 7. | 245-6447 | [1] | CUSHION AS | |
| 8. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 262-5236 | [1] | COVER | |
| 11. | 262-5239 | [1] | HOUSING AS | |
| 12. | 262-5240 | [1] | PLATE AS | |
| 13. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 14. | 8R-3695 | [2] | GROMMET | |
| 15. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 17. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 18. | 9X-2044 M | [17] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 19. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 20. | 6V-3987 D | SEAL (0.062-M EA) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42831017
243-1089: CONTROL GP-ELECTROHYDRAULIC
243-1089 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N M3G306-550
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
S/N M3G306-550
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 245-6447 | [1] | CUSHION AS | |
| 7. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 8. | 247-4969 | [1] | PLATE | |
| 9. | 262-5236 | [1] | COVER | |
| 10. | 262-5239 | [1] | HOUSING AS | |
| 11. | 262-5240 | [1] | PLATE AS | |
| 12. | 307-4671 CY | [1] | CONTROL GP-HANDLE (PILOT CONTROL)(TILT) | |
| 12A. | 307-4671 CY | [1] | CONTROL GP-HANDLE (PILOT CONTROL)(LIFT) | |
| 13. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 14. | 8R-3695 | [2] | GROMMET | |
| 15. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 17. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 18. | 9X-2044 M | [17] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 19. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 20. | 6V-3987 D | SEAL (0.06-M EACH) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42831018
243-1089: CONTROL GP-ELECTROHYDRAULIC
243-1089 CONTROL GP-ELECTROHYDRAULIC -2-FUNCTION
S/N M3G551-UP
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS, 243-1938 SWITCH GP-TRANSMISSION
S/N M3G551-UP
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS, 243-1938 SWITCH GP-TRANSMISSION
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 307-4671 Y | [1] | CONTROL GP-HANDLE (PILOT CONTROL)(TILT) | |
| 6A. | 307-4671 Y | [1] | CONTROL GP-HANDLE (PILOT CONTROL)(LIFT) | |
| 7. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 262-5236 | [1] | COVER | |
| 11. | 262-5239 | [1] | HOUSING AS | |
| 12. | 262-5240 | [1] | PLATE AS | |
| 13. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 14. | 8R-3695 | [2] | GROMMET | |
| 15. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 17. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 18. | 9X-2044 M | [17] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 19. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 20. | 6V-3987 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42831019
243-1940: CONTROL GP-ELECTROHYDRAULIC
243-1940 CONTROL GP-ELECTROHYDRAULIC -3-FUNCTION
S/N M3G1-302
PART OF 237-0269, 244-3825, 325-2735, 325-2743 HYDRAULIC AR-3 VALVE
S/N M3G1-302
PART OF 237-0269, 244-3825, 325-2735, 325-2743 HYDRAULIC AR-3 VALVE
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 7. | 243-3166 Y | [1] | CONTROL GP-HANDLE (TILT) | |
| 7A. | 243-3166 Y | [1] | CONTROL GP-HANDLE (LIFT) | |
| 7B. | 243-3166 Y | [1] | CONTROL GP-HANDLE (AUXILIARY) | |
| 8. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 10. | 247-4969 | [1] | PLATE | |
| 11. | 262-5237 | [1] | COVER | |
| 12. | 262-5239 | [1] | HOUSING AS | |
| 13. | 262-5240 | [1] | PLATE AS | |
| 14. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 15. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 17. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 18. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 19. | 6V-3987 D | SEAL (0.062-M EACH) | ||
| 20. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 21. | 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT)(3RD FUNCTION SELECT) | |
| 22. | 8R-3695 | [2] | GROMMET | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
