204-3462 WIRING GP-GRADE CONTROL S/N DHP1-UP PART OF 292-0277 GRADE CONTROL AR-SATELLITE 345C EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 204-3462 WIRING GP-
1. 227-7137 WIRING GP-
2. 238-2155 WIRING GP-
3. 283-2913 WIRING GP-
4. 238-1570 WIRING GP-
5. 238-1570 WIRING GP-
6. 230-0961 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 227-6044 DRIVE GP-F
8. 227-6045 DRIVE GP-F

POWER TRAIN AR

9. 227-6042 POWER TRAI
0. INFORMATION

EXCAVATOR 345C EXCAVATOR DHP
345C LC Excavator DHP00001-UP (MACHINE) POWERED BY C13 Engine SEBP4284 345C DHP (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

238-2273 WIRING GP-FAN

227-7143 WIRING GP-FINE SWING

204-3462 WIRING GP-GRADE CONTROL

227-7137 WIRING GP-HAMMER

238-2155 WIRING GP-PLATFORM

283-2913 WIRING GP-RADIO

#SEBP42840330

204-3462: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

204-3462 WIRING GP-GRADE CONTROL
S/N DHP1-UP
PART OF 292-0277 GRADE CONTROL AR-SATELLITE

i03941429 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
9X-2480 M	[4]	BOLT (M6X1X45-MM)
277-2109	[1]	CABLE AS (INLINE)
285-6539	[1]	CABLE AS (BOOM)
285-6544	[1]	CABLE AS (STICK)
291-1827	[1]	CABLE AS (BUCKET)
286-2484	[4]	CLAMP
6D-4244	[2]	CLIP
111-4836	[21]	CLIP
8T-4133 M	[19]	NUT (M10X1.5-THD)
107-4749	[2]	PLATE
3S-2093	[11]	STRAP-CABLE
7K-1181	[8]	STRAP-CABLE
9X-8256	[4]	WASHER (6.6X12X2-MM THK)
8T-4121	[24]	WASHER-HARD (11X21X2.5-MM THK)
M		METRIC PART

#SEBP42840331

227-7137: WIRING GP-HAMMER

WIRING GP-HAMMER

227-7137 WIRING GP-HAMMER -SYSTEM 3
S/N DHP1-UP
PART OF 239-8948 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02233197 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	7K-1181	[21]	STRAP-CABLE
4.	116-0118	[3]	CLIP
5.	149-5050	[1]	RELAY (24-VOLT)
6.	251-0375	[1]	HARNESS AS-PANEL (MAIN RELAY)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
7.	251-0377	[1]	HARNESS AS-CONTROL (HAMMER)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8.	259-4891	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
9.	132-5789	[1]	CLIP (LADDER)
10.	5C-2890 M	[1]	NUT (M6X1-THD)
11.	7X-2621 M	[1]	BOLT (M10X1.5X12-MM)
12.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
13.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP42840332

238-2155: WIRING GP-PLATFORM

WIRING GP-PLATFORM

238-2155 WIRING GP-PLATFORM
S/N DHP1-UP
PART OF 225-5785 OPERATOR AR

i02224353 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[9]	STRAP-CABLE
4.	111-4837	[4]	CLIP
5.	111-4838	[2]	CLIP
6.	111-4839	[2]	STRAP
7.	116-0118	[9]	CLIP
8.	204-1816	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	231-1692	[1]	HARNESS AS-PLATFORM
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)(3-PIN)
	243-4508	[3]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)(8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
	230-4009	[2]	PLUG AS-CONNECTOR (12-PIN)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)(3-PIN)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
10.	234-1122	[1]	COVER
11.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	3E-5169	[1]	GUARD-SWITCH
14.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
15.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
16.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
18.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
19.	259-4939	[1]	RECEPTACLE AS
	8T-8737	[6]	PLUG-SEAL
	M		METRIC PART

#SEBP42840333

283-2913: WIRING GP-RADIO

WIRING GP-RADIO

283-2913 WIRING GP-RADIO
S/N DHP1-UP
CANNOT BE USED WITH @@@@@231-1768@@@@@
AN ATTACHMENT

i02558511 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[4]	RELAY (24-VOLT)(SPEAKERS)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2914	[1]	HARNESS AS-RADIO
	8T-8737	[9]	PLUG-SEAL
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[25]	STRAP-CABLE
	149-5051	[4]	CONNECTOR-RECEPTACLE
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
10.	283-2984	[1]	COVER
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42840334

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N DHP1-UP
PART OF 220-2520 PUMP AR-REFUELING
Type 1
AN ATTACHMENT

i02213964 SEBP4284

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	238-1593	[1]	WIRE AS
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42840335

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N DHP1-UP
PART OF 220-2520 PUMP AR-REFUELING
Type 2
AN ATTACHMENT

i03087780 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42840336

230-0961: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N MHX1-UP
PART OF 267-0009 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02229274 SEBP4284

2300961 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-6508	[6]	CAP AS
2.	418-7614 Y	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
3.	6V-8837 M	[5]	BOLT (M6X1X16-MM)
4.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
5.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
6.	237-9960	[5]	CLIP
7.	3S-2093	[5]	STRAP-CABLE
8.	5P-0537	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42840337

227-6044: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N DHP1-UP
PART OF 227-6042 POWER TRAIN AR

i02219641 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4504 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	227-6045 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP42840338

227-6045: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N DHP1-UP
PART OF 227-6044 DRIVE GP-FINAL

i02219800 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
4.	7M-8485	[2]	SEAL-O-RING
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
12.	7Y-1473 B	[1]	SHIM (0.3-MM THK)
13.	7Y-1474 B	[1]	SHIM (0.4-MM THK)
14.	7Y-1475 B	[1]	SHIM (0.5-MM THK)
15.	7Y-1476 B	[1]	SHIM (0.6-MM THK)
16.	7Y-1477 B	[1]	SHIM (0.7-MM THK)
17.	7Y-1478 B	[1]	SHIM (0.8-MM THK)
18.	7Y-1479 B	[1]	SHIM (1-MM THK)
19.	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	200-3489	[1]	HOUSING-MOTOR
37.	200-3490	[1]	HOUSING-GEAR
38.	205-9025	[1]	SEAL GP-DUO-CONE
	205-9024	[2]	RING-TORIC
39.	227-6048	[12]	WASHER (26X40X4-MM THK)
40.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
41.	199-4582	[3]	BEARING AS
42.	095-0891	[7]	PIN-SPRING
43.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
44.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
45.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
46.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
47.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
48.	8C-5240	[1]	SEAL-O-RING
49.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
50.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
51.	8T-4240	[3]	RING-RETAINING
52.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP42840339

227-6042: POWER TRAIN AR

POWER TRAIN AR

227-6042 POWER TRAIN AR
S/N DHP1-UP
PART OF 220-2459 GENERAL AR

i02225166 SEBP4284

For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
227-6046 Y	[1]	DRIVE GP-SWING (WITH MOTOR, LH)
227-6047 Y	[1]	DRIVE GP-SWING (WITH MOTOR, RH)
227-6050 Y	[1]	FASTENER GP-SWING & FINAL DR
227-6044 Y	[2]	DRIVE GP-FINAL (WITH MOTOR)
115-6399 Y	[2]	SPROCKET GP (NON-SEGMENTED)
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
345C Excavator

Battery or Battery Cable - Inspect/Replace
345C Excavator

Battery - Recycle
345C Excavator

Fuses - Replace
345C Excavator

Power Receptacle - If Equipped
345C Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation of the 283-2554 Coupler Lines Group (Kit, Hydraulic Pin Grabber){1408, 5057, 5264, 5479, 5491, 6129, 7332}
Installation of the 283-2554 Coupler Lines Group (Kit, Hydraulic Pin Grabber){1408, 5057, 5264, 5479, 5491, 6129, 7332}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE STARTER CABLE ROUTING ON CERTAIN 345C AND 345CL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE STARTER CABLE ROUTING ON CERTAIN 345C AND 345CL EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Relays
345C Excavator Tool Control System

Switches
345C Excavator Tool Control System

Senders
345C Excavator Tool Control System

Sensors
345C Excavator Tool Control System

Switches
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Sensors
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

System Schematic
Machine Security System

Electrical Connector - Inspect
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Switch Status - Check
345C Excavator Tool Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
345C Excavator Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

System Schematic
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Electrical Connector - Inspect
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
Machine Security System

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
345C Excavator Tool Control System

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Harness and Wire Identification
345C Excavator Tool Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

Relay (Hydraulic Activation)
345C Excavator Tool Control System

MID 105 - CID 0586 - FMI 05
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0586 - FMI 12
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 1178 - FMI 03
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 1178 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0588 - FMI 09
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 105 - CID 0600 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Component and Connector Locations
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

MID 105 - CID 0096 - FMI 04
345C and W345C Excavators and 345C MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

New Software Prevents a False Warning for the Hydraulic Oil Temperature and a False Message During the Calibration of the Fan Speed {1408, 7610, 7620}
2007/09/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/03/11

An Improved Backup Alarm is Now Available {7406}
2009/01/26

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2009/06/01

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

A Troubleshooting Procedure is Available for the Operation Check Relay on Certain Excavators {1408, 7301}
2010/07/28

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 345C :

227-7143 WIRING GP-FINE SWING

238-2273 WIRING GP-FAN

219-7462 WIRING GP-ELECTRONIC CONTROL

238-2120 WIRING GP-COUNTERWEIGHT

231-1767 WIRING GP-CONVERTER

231-1766 WIRING GP-CONVERTER

227-7140 WIRING GP-CONTROL

231-1837 WIRING GP-CONSOLE

227-7137 WIRING GP-HAMMER

238-2155 WIRING GP-PLATFORM

283-2913 WIRING GP-RADIO

238-1570 WIRING GP-REFUELING PUMP

230-0961 WIRING GP-UNIT INJECTOR

227-6044 DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL

Truck sale:

Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI

70,587

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.

70,255

Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.