AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

227-6044 DRIVE GP-FINAL -WITH MOTOR S/N TBA1-UP; WDE1-UP; BWY1-UP PART OF 227-6042, 227-6043 POWER TRAIN AR 345C


POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR
SPROCKET GP
FRAME AND BODY
BOX GP
BUMPER GP
COUNTERWEIGHT GP

EXCAVATOR 345C EXCAVATOR BWY
 345C & 345C L Excavators BWY00001-UP (MACHINE) POWERED BY C13 Engine SEBP4286 345C BWY   (2004)

POWER TRAIN

DRIVE GP-FINAL
DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6045 DRIVE GP-FINAL
FASTENER GP-SWING & FINAL DR
227-6050 FASTENER GP-SWING & FINAL DR
FASTENER GP-SWING & FINAL DR
227-6051 FASTENER GP-SWING & FINAL DR
 

#SEBP42860380
 

227-6044: DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N TBA1-UP; WDE1-UP; BWY1-UP
PART OF 227-6042, 227-6043 POWER TRAIN AR
i02219641 SEBP4286
2276044 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4504 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6045 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42860381
 

227-6045: DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N TBA1-UP; WDE1-UP; BWY1-UP
PART OF 227-6044 DRIVE GP-FINAL
i02219800 SEBP4286
2276045 DRIVE GP-FINAL Parts scheme 2276045 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
4. 7M-8485 [2] SEAL-O-RING  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
12. 7Y-1473 B [1] SHIM (0.3-MM THK)  
13. 7Y-1474 B [1] SHIM (0.4-MM THK)  
14. 7Y-1475 B [1] SHIM (0.5-MM THK)  
15. 7Y-1476 B [1] SHIM (0.6-MM THK)  
16. 7Y-1477 B [1] SHIM (0.7-MM THK)  
17. 7Y-1478 B [1] SHIM (0.8-MM THK)  
18. 7Y-1479 B [1] SHIM (1-MM THK)  
19. 7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 200-3489 [1] HOUSING-MOTOR  
37. 200-3490 [1] HOUSING-GEAR  
38. 205-9025 [1] SEAL GP-DUO-CONE  
  205-9024 [2] RING-TORIC  
39. 227-6048 [12] WASHER (26X40X4-MM THK)  
40. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
41. 199-4582 [3] BEARING AS  
42. 095-0891 [7] PIN-SPRING  
43. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
44. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
45. 6V-8133 M [12] BOLT (M24X3X80-MM)  
46. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
47. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
48. 8C-5240 [1] SEAL-O-RING  
49. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
50. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
51. 8T-4240 [3] RING-RETAINING  
52. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42860382
 

227-6042: POWER TRAIN AR

227-6042 POWER TRAIN AR
S/N TBA1-UP; BWY1-UP
PART OF 220-2458, 245-5642 GENERAL AR
i02881249 SEBP4286
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-6046 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
    S/N BWY1-245; TBA1-414
  296-6252 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
    S/N BWY246-UP; TBA415-UP
  227-6047 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
    S/N BWY1-245; TBA1-414
  296-6249 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
    S/N BWY246-UP; TBA415-UP
  227-6050 Y [1] FASTENER GP-SWING & FINAL DR  
  227-6044 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
  115-6399 Y [2] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42860383
 

227-6043: POWER TRAIN AR

227-6043 POWER TRAIN AR
S/N WDE1-UP
PART OF 245-5643 GENERAL AR
i02942254 SEBP4286
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-6044 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
  227-6046 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
    S/N WDE1-163
  296-6252 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
    S/N WDE164-UP
  227-6047 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
    S/N WDE1-163
  296-6249 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
    S/N WDE164-UP
  227-6051 Y [1] FASTENER GP-SWING & FINAL DR  
  115-6399 Y [2] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42860384
 

115-6399: SPROCKET GP

115-6399 SPROCKET GP
S/N TBA1-UP; WDE1-UP; BWY1-UP
PART OF 227-6042, 227-6043 POWER TRAIN AR
i02219631 SEBP4286
1156399 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 520-7951 M [20] BOLT-HEAD (M24X3X60-MM)  
2. 124-3296 [1] SPROCKET-TRACK (23-TEETH)  
  M   METRIC PART
 

#SEBP42860385
 

223-2977: BOX & MTG GP-STORAGE

223-2977 BOX & MTG GP-STORAGE
S/N TBA1-UP; WDE1-UP; BWY1-UP
PART OF 220-2466, 245-5644, 245-5645 CHASSIS AR
i02223895 SEBP4286
2232977 BOX & MTG GP-STORAGE Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8578 [6] BOLT AS  
2. 223-2978 Y [1] BOX GP-STORAGE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42860386
 

223-2978: BOX GP-STORAGE

223-2978 BOX GP-STORAGE
S/N TBA1-UP; WDE1-UP; BWY1-UP
PART OF 223-2977 BOX & MTG GP-STORAGE
i02223909 SEBP4286
2232978 BOX GP-STORAGE Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-2187 [1] SUPPORT AS  
2. 236-3665 [1] BOX AS  
3. 236-3666 [1] COVER AS  
  237-5586 E SEAL (228-CM)  
3A. 3D-9143 [2] HINGE-BUTT  
4. 236-3668 [1] PLUNGER AS  
5. 375-8597 J [1] LOCK AS  
6. 236-3670 [1] STRIKER AS  
7. 236-3671 [1] SEAL  
8. 236-3672 B [1] SHIM (0.5-MM THK)  
9. 236-3673 [1] SHEET  
10. 095-0843 [1] PIN-COTTER  
11. 096-3780 [1] PIN-CLEVIS  
12. 096-3872 [1] GROMMET  
13. 5C-9553 M [1] BOLT (M6X1X16-MM)  
14. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 8T-4133 M [4] NUT (M10X1.5-THD)  
17. 8T-4171 M [2] BOLT (M6X1X12-MM)  
18. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
21. 105-3487 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP42860387
 

228-5462: BUMPER GP

228-5462 BUMPER GP
S/N TBA1-UP; BWY1-UP
PART OF 257-4590 GUARD AR
AN ATTACHMENT
i02495850 SEBP4286
2285462 BUMPER GP Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-7525 [2] BUMPER AS (920-MM)  
2. 180-7529 [2] BUMPER AS (930-MM)  
3. 180-7537 [1] BUMPER AS (510-MM)  
4. 186-5614 [2] BUMPER AS (560-MM)  
5. 219-8277 [1] BUMPER AS (1388-MM)  
6. 228-5463 [1] BUMPER AS (685-MM)  
7. 8T-4223 [21] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 8T-4244 M [21] NUT (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP42860388
 

230-0142: CHAIN GP-COUNTERWEIGHT

230-0142 CHAIN GP-COUNTERWEIGHT
S/N TBA1-UP; WDE1-UP; BWY1-UP
PART OF 220-2529 COUNTERWEIGHT AR
AN ATTACHMENT
i02210046 SEBP4286
2300142 CHAIN GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 086-0507 [1] PIN  
2. 093-0349 [2] WASHER (22X60X6-MM THK)  
3. 127-6738 [2] SPROCKET AS  
    (EACH INCLUDES)
3A. 3B-8485 [1] ELBOW  
3B. 127-6740 [1] BUSHING  
4. 127-6741 M [1] PIN  
5. 127-6742 M [2] PIN  
6. 131-9524 [1] SUPPORT  
7. 132-1609 [1] CASE AS  
8. 132-1785 [2] SPACER (18X38X150-MM THK)  
9. 135-4069 [1] GUIDE AS  
10. 331-2019 [1] CHAIN AS  
  7Y-5233 M [1] LOCKNUT (M24X3-THD)  
11. 146-1331 [1] PIN  
12. 146-1332 [1] PLATE  
13. 096-4879 M [1] NUT (M36X4-THD)  
14. 7Y-1537 M [2] LOCKNUT (M20X2.5-THD)  
15. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
17. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
19. 8T-6385 M [2] BOLT (M16X2X180-MM)  
20. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#SEBP42860389
 

220-2529: COUNTERWEIGHT AR

220-2529 COUNTERWEIGHT AR
S/N TBA1-UP; WDE1-UP; BWY1-UP
AN ATTACHMENT
i02210178 SEBP4286
  For full view, you need register

Parts for your 345C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  230-0142 Y [1] CHAIN GP-COUNTERWEIGHT  
  225-4533 Y [1] CYLINDER & SEAL GP-CTWT  
  220-2530 Y [1] FILM GP (COUNTERWEIGHT REMOVAL)  
  228-5592 Y [1] FRAME GP-UPPER  
  223-2985 Y [1] HOOD & GUARD GP (COUNTERWEIGHT REMOVAL)  
  227-0459 Y [1] LINES GP-REAR ATTACHMENT  
  230-0141 Y [1] MOUNTING GP-COUNTERWEIGHT CYL (COUNTERWEIGHT REMOVAL)  
  238-2120 Y [1] WIRING GP-COUNTERWEIGHT (COUNTERWEIGHT REMOVAL)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Final Drive Oil - Change
345C Excavator
Final Drive Oil Level - Check
345C Excavator
Final Drive Oil Sample - Obtain
345C Excavator
Special Instruction
Procedure to Install an Open Labyrinth Motor Housing on the Final Drives of Certain 345C, 345D, 349D, and 349D2 Excavators {4050}
Procedure to Install an Open Labyrinth Motor Housing on the Final Drives of Certain 345C, 345D, 349D, and 349D2 Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Specifications
Final Drive
345C Excavator Machine System Specifications
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Final Drive
345C Excavator Hydraulic System
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems
Final Drive - Disassemble
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems
Final Drive - Assemble
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems
Final Drive and Travel Motor - Remove
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems
Final Drive and Travel Motor - Install
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Improved 8T-0531 Duo-Cone Seal Installer As Is Now Available {0700, 0722, 0727}
2006/01/02
Managing the Life Cycles of Excavator Final Drives {4050}
2007/07/16
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
A New Final Drive is Now Available On Certain 345C, 345D, 349D, and 349D2 Excavators {4050}
2013/04/17
Final Drive Motor Housings Are Available for Certain Excavators {4050}
Final Drive Motor Housings Are Available for Certain Excavators {4050}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 345C :

WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-PLATFORM
238-2155 WIRING GP-PLATFORM
WIRING GP-HAMMER
227-7137 WIRING GP-HAMMER
204-3462 WIRING GP-GRADE CONTROL
WIRING GP-FINE SWING
227-7143 WIRING GP-FINE SWING
WIRING GP-FAN
238-2273 WIRING GP-FAN
DRIVE GP-FINAL
227-6045 DRIVE GP-FINAL
227-6042 POWER TRAIN AR
227-6043 POWER TRAIN AR
SPROCKET GP
115-6399 SPROCKET GP
BOX & MTG GP-STORAGE
223-2977 BOX & MTG GP-STORAGE
BOX GP-STORAGE
223-2978 BOX GP-STORAGE
BUMPER GP
228-5462 BUMPER GP
CHAIN GP-COUNTERWEIGHT
230-0142 CHAIN GP-COUNTERWEIGHT

Truck sale:

Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C
 
Caterpillar 345C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 345C, Crawler Excavators, Construction
70,587 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
70,255 
Caterpillar 345C, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.