AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

156-2829 SOLENOID GP S/N MEM1-UP PART OF 194-0946, 194-0947, 224-6809 MANIFOLD & VALVE GP ALSO AN ATTACHMENT 365C


ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
STARTING AID GP
STARTING AR
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 365C EXCAVATOR MEM
 365C L Excavator MEM00001-UP (MACHINE) POWERED BY C-15 Engine SEBP4289 365C MEM   (2004)

ELECTRICAL AND STARTING SYSTEM

SOLENOID GP
SOLENOID GP
156-2829 SOLENOID GP
 

#SEBP42890270
 

156-2829: SOLENOID GP

156-2829 SOLENOID GP
S/N MEM1-UP
PART OF 194-0946, 194-0947, 224-6809 MANIFOLD & VALVE GP
ALSO AN ATTACHMENT
i02208734 SEBP4289
1562829 SOLENOID GP Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-9247 [1] WASHER (19.15X31.65X2.36-MM THK)  
2. 198-2914 [1] NUT (3/4-32-THD)  
3. 316-1438 [1] CARTRIDGE AS  
  214-7568 [2] SEAL-O-RING  
4. 326-5212 [1] COIL AS (24-VOLT)  
 

#SEBP42890271
 

222-8351: STARTING AID GP-ETHER

222-8351 STARTING AID GP-ETHER
S/N MEM1-UP
PART OF 257-4492 STARTING AR-COLD WEATHER
AN ATTACHMENT
i02619792 SEBP4289
2228351 STARTING AID GP-ETHER Parts scheme 2228351 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6312 [1] UNION  
2. 5P-6313 [3] NUT (5/16-24-THD)  
3. 5P-6314 [3] SLEEVE  
4. 7N-0140 [1] TUBE AS-COIL  
5. 7N-2059 [1] CLAMP AS (CYLINDER)  
6. 7X-6101 [1] ATOMIZER GP-ETHER  
7. 230-1434 [1] FITTING AS  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
8. 239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
9. 239-6655 [1] TUBE  
10. 239-6673 [1] TUBE  
11. 251-0524 C [1] SUPPORT AS  
12. 255-2921 C [1] TUBE  
13. 1B-3581 [2] CLIP  
14. 2B-2404 C [2] CLIP  
15. 3D-5102 C [6] GROMMET  
16. 4M-5317 [1] BUSHING-REDUCER  
17. 5K-0430 C [2] CLIP  
18. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
19. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
20. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
21. 8P-8540 [1] GROMMET  
22. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
24. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
25. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
26. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
27. 8T-4192 CM [1] BOLT (M12X1.75X25-MM)  
28. 8T-4223 C [4] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
31. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
32. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890272
 

257-4492: STARTING AR-COLD WEATHER

257-4492 STARTING AR-COLD WEATHER
S/N MEM1-UP
AN ATTACHMENT
i02219244 SEBP4289
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-7133 Y [1] BATTERY & WIRING GP  
  222-8351 Y [1] STARTING AID GP-ETHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890273
 

105-4729: STARTING MOTOR GP-ELECTRIC

105-4729 STARTING MOTOR GP-ELECTRIC
S/N LHX1-2077
PART OF 257-4958 ENGINE AR-COMPLETE
i01972233 SEBP4289
1054729 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 4N-1059 [1] GASKET  
3. 237-1962 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 105-4728 [1] WIRE AS  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890274
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
S/N LHX1-2077
24-VOLT
PART OF 105-4729 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
i01972308 SEBP4289
2371962 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 125-6537 [1] INSULATOR  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 318-2082 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
65. 125-6536 [1] TERMINAL AS  
 

#SEBP42890275
 

272-7123: STARTING MOTOR GP-ELECTRIC

272-7123 STARTING MOTOR GP-ELECTRIC
S/N LHX2078-UP
24 VOLT
PART OF 273-1682 STARTING MOTOR GP-ELECTRIC
i02365934 SEBP4289
2727123 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 7F-3491 [2] WASHER (0.516X1X0.094-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
14. 3L-3380 [1] BUSHING-TERMINAL  
15. 036-9821 [1] WASHER  
16. 4M-1828 [1] RETAINER-SPRING  
17. 306-3998 [1] BOOT-RUBBER  
18. 9M-7609 [1] SPRING (SHIFT LEVER)  
19. 4M-1827 [1] RETAINER-SPRING  
20. 8C-3089 [1] SEAL-O-RING  
21. 4M-1853 [1] LEVER AS-SHIFT  
22. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
23. 7L-2894 [4] GASKET  
24. 4M-1831 [4] PLUG-LEVER HOUSING  
25. 4M-1854 [1] SHAFT-LEVER  
26. 1H-1023 [1] SEAL-O-RING  
27. 2D-6392 [1] SEAL-O-RING  
28. 272-7152 [1] HOUSING AS-DRIVE  
29. 6N-3826 [1] DRIVE AS-MOTOR  
30. 2H-3429 [2] RING-RETAINING  
31. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
32. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 6N-3279 [1] INSULATOR  
34. 036-9823 [13] BOLT (1/4-28X1-IN)  
35. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
36. 1H-2629 [3] STRIP-INSULATION  
37. 7M-0324 [1] COIL AS-FIELD  
38. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
39. 7F-3488 [6] SHOE-POLE  
40. 7M-8651 [1] ARMATURE AS  
41. 7M-0325 [1] INSULATOR  
42. 3T-9524 [6] BRUSH AS  
43. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES INSULATOR, BUSHINGS, & WASHER)
44. 125-6537 [1] INSULATOR  
45. 3R-8801 [1] CLAMP  
46. 8F-1434 [2] LOCKWASHER  
47. 6V-8188 [6] NUT (1/2-13-THD)  
48. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
49. 4B-2049 [6] NUT (10-32-THD)  
50. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
51. 3T-9494 [6] SPRING  
52. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
53. 9G-4101 [1] BUSHING-END  
54. 3T-3424 [3] PLUG-FELT  
55. 3T-3423 [3] CUP  
56. 1M-9968 [1] BUSHING  
57. 2F-6678 [1] SEAL-LIP TYPE  
58. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
59. 4M-1896 [1] BUSHING-TERMINAL  
60. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
61. 125-6535 [1] COVER-STARTING MOTOR  
62. 7T-9123 [1] GASKET-PLATE  
63. 318-2082 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
64. 125-6536 [1] TERMINAL AS  
 

#SEBP42890276
 

273-1682: STARTING MOTOR GP-ELECTRIC

273-1682 STARTING MOTOR GP-ELECTRIC
S/N LHX2078-UP
24 VOLT
PART OF 257-4958 ENGINE AR-COMPLETE
i02365191 SEBP4289
2731682 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1059 [1] GASKET  
2. 8Y-9603 [1] CABLE AS-STARTING MOTOR (GROUND)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(28-CM)  
3. 272-7123 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890277
 

338-3454: STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
S/N LHX1-2077
24-VOLT
FIELD REPLACEMENT FOR @@@@@237-1962@@@@@
i03920474 SEBP4289
3383454 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 125-6535 [1] COVER-STARTING MOTOR  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 494-6475 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
40A. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890278
 

547-7976: SWITCH & WIRE GP-FUEL LEVEL

547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N MEM1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
i07202495 SEBP4289
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [18] STRAP-CABLE  
  418-6596 [1] SWITCH AS-LIQUID LEVEL  
  3T-4696 [1] TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW)  
  6A-3361 H WIRE-ELECTRICAL (16-GA)(60-DM)  
  H   ORDER BY THE DECIMETER
 

#SEBP42890279
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N MEM1-UP
PART OF 224-2861 PANEL GP-CIRCUIT BREAKER
i00187759 SEBP4289
7N0718 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 9F-5644 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

Information:

Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C15 Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C15 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines
Injector Solenoid - Test
C15 and C18 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 365C :

SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-SPEED
239-5928 SENSOR GP-SPEED
SENSOR GP-SPEED
214-2484 SENSOR GP-SPEED
SENSOR GP-SPEED
201-6617 SENSOR GP-SPEED
STARTING AID GP-ETHER
222-8351 STARTING AID GP-ETHER
257-4492 STARTING AR-COLD WEATHER
STARTING MOTOR GP-ELECTRIC
105-4729 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
272-7123 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
273-1682 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
547-7976 SWITCH & WIRE GP-FUEL LEVEL

Truck sale:

Caterpillar 365C
 
Caterpillar 365C
- Crawler Excavators
FINANZAUTO S.A.
Caterpillar 365C, Crawler Excavators, Construction
149,159 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
Caterpillar 365C, Crawler Excavators, Construction
187,176 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung
179.849 
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung


Caterpillar 365C, Construction
98,651 USD 
Caterpillar 365C, Construction
- Crawler Excavators
FINANZAUTO S.A.
(COMUNIDAD DE MADRID), Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.