ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP42890310
259-4970: WIRING GP-COMMUNICATION
259-4970 WIRING GP-COMMUNICATION -PRODUCT LINK 121S
S/N MEM1-UP
PART OF 303-2724 INSTALLATION AR-COMMUNICATION, 257-4507 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
S/N MEM1-UP
PART OF 303-2724 INSTALLATION AR-COMMUNICATION, 257-4507 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 116-0118 | [2] | CLIP | |
| 3. | 259-4967 | [1] | HARNESS AS-CONTROL | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 4. | 259-4969 | [1] | HARNESS AS-CONTROL (SERVICE CONNECTOR) | |
| 8T-8732 | [1] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 100-5805 | [1] | CAP-RECEPTACLE (3-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 5. | 111-4836 | [1] | CLIP | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
#SEBP42890311
227-7129: WIRING GP-CONSOLE
227-7129 WIRING GP-CONSOLE
S/N MEM1-UP
PART OF 225-5752, 296-4904 OPERATOR AR
ALSO AN ATTACHMENT
S/N MEM1-UP
PART OF 225-5752, 296-4904 OPERATOR AR
ALSO AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS#SEBP42890312
227-7130: WIRING GP-CONSOLE
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 163-6711 | [1] | SWITCH AS-TOGGLE (BACKUP TRAVEL, LH) | |
| 3. | 163-6795 | [3] | STRAP-CABLE | |
| 4. | 251-0600 | [1] | HARNESS AS-CONSOLE (BACKUP, JOYSTICK) | |
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 5. | 234-1112 | [1] | BRACKET | |
| 6. | 234-1155 | [1] | SWITCH AS-TOGGLE (BACKUP BOOM) | |
| 7. | 238-1641 | [1] | BRACKET AS | |
| 8. | 9X-2042 M | [3] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 9. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 10. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 11. | 251-0605 | [1] | BRACKET | |
| 12. | 7K-1181 | [2] | STRAP-CABLE | |
| 13. | 7I-2673 | [1] | STRAP-CABLE | |
| M | METRIC PART | |||
#SEBP42890313
227-7130: WIRING GP-CONSOLE
227-7130 WIRING GP-CONSOLE -LH
S/N MEM186-UP
PART OF 227-7129 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
S/N MEM186-UP
PART OF 227-7129 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 163-6711 | [1] | SWITCH AS-TOGGLE (BACKUP TRAVEL, LH) | |
| 3. | 163-6795 | [3] | STRAP-CABLE | |
| 4. | 259-5098 C | [1] | HARNESS AS-CONSOLE | |
| 3S-2093 | [7] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 247-2693 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 5. | 234-1112 | [1] | BRACKET | |
| 6. | 234-1155 | [1] | SWITCH AS-TOGGLE (BACKUP BOOM) | |
| 7. | 238-1641 | [1] | BRACKET AS | |
| 8. | 9X-2042 M | [3] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 9. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 10. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 11. | 251-0605 | [1] | BRACKET | |
| 12. | 7K-1181 C | [7] | STRAP-CABLE | |
| 13. | 7I-2673 | [1] | STRAP-CABLE | |
| 14. | 176-1913 C | [1] | GUARD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP42890314
227-7131: WIRING GP-CONSOLE
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 163-6710 | [1] | SWITCH AS-TOGGLE (AUTO/MANUAL ENG SPEED CONTROL) | |
| 3. | 163-6711 | [1] | SWITCH AS-TOGGLE (BACKUP TRAVEL, RH) | |
| 3A. | 163-6711 | [1] | SWITCH AS-TOGGLE (BACKUP GOVERNOR) | |
| 4. | 163-6795 | [3] | STRAP-CABLE | |
| 5. | 251-0601 | [1] | HARNESS AS-CONSOLE (BACKUP, JOYSTICK) | |
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 247-2693 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 6. | 251-0602 | [1] | BRACKET | |
| 7. | 251-0606 | [1] | BRACKET AS | |
| 8. | 9X-2043 M | [3] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 9. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 10. | 7K-1181 | [2] | STRAP-CABLE | |
| M | METRIC PART | |||
#SEBP42890315
227-7131: WIRING GP-CONSOLE
227-7131 WIRING GP-CONSOLE -RH
S/N MEM1-UP
PART OF 227-7129 WIRING GP-CONSOLE
AN ATTACHMENT
S/N MEM1-UP
PART OF 227-7129 WIRING GP-CONSOLE
AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [2] | STRAP-CABLE | |
| 2. | 283-3074 | [1] | SWITCH AS-TOGGLE (AUTO/MANUAL ENG SPEED CONTROL) | |
| 3. | 163-6711 | [1] | SWITCH AS-TOGGLE (BACKUP TRAVEL, RH) | |
| 3A. | 163-6711 | [1] | SWITCH AS-TOGGLE (THROTTLE BACKUP) | |
| 4. | 163-6795 | [3] | STRAP-CABLE | |
| 5. | 251-0601 | [1] | HARNESS AS-CONSOLE (BACKUP, JOYSTICK) | |
| 6. | 251-0602 | [1] | BRACKET | |
| 7. | 251-0606 | [1] | BRACKET AS | |
| 9. | 9X-2042 CM | [5] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 10. | 7K-1181 | [2] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP42890316
250-0103: WIRING GP-CONSOLE
250-0103 WIRING GP-CONSOLE -RH
S/N MEM1-UP
PART OF 249-4605 VALVE AR-BOOM LOWERING CONTROL
AN ATTACHMENT
S/N MEM1-UP
PART OF 249-4605 VALVE AR-BOOM LOWERING CONTROL
AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS#SEBP42890317
250-0107: WIRING GP-CONSOLE
250-0107 WIRING GP-CONSOLE -BOOM FLOAT
S/N MEM1-UP
PART OF 249-4605 VALVE AR-BOOM LOWERING CONTROL
AN ATTACHMENT
S/N MEM1-UP
PART OF 249-4605 VALVE AR-BOOM LOWERING CONTROL
AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS#SEBP42890318
231-1766: WIRING GP-CONVERTER
231-1766 WIRING GP-CONVERTER
S/N MEM1-UP
12-VOLT, 7-AMPERE POWER SUPPLY
Type 1
CANNOT BE USED WITH @@@@@231-1767@@@@@
AN ATTACHMENT
S/N MEM1-UP
12-VOLT, 7-AMPERE POWER SUPPLY
Type 1
CANNOT BE USED WITH @@@@@231-1767@@@@@
AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SIS#SEBP42890319
231-1766: WIRING GP-CONVERTER
231-1766 WIRING GP-CONVERTER
S/N MEM1-UP
12-VOLT, 7-AMPERE POWER SUPPLY
Type 2
CANNOT BE USED WITH @@@@@231-1767@@@@@
AN ATTACHMENT
S/N MEM1-UP
12-VOLT, 7-AMPERE POWER SUPPLY
Type 2
CANNOT BE USED WITH @@@@@231-1767@@@@@
AN ATTACHMENT
Parts for your 365C EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper
C15 Engine for the 657G Wheel Tractor-Scraper
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0102 FMI 04 Boost Pressure Sensor short to ground
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 2417 FMI 05 Ether Injection Control Solenoid current low
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 2417 FMI 06 Ether Injection Control Solenoid current high
C15 Engine for the 657G Wheel Tractor-Scraper
C15 Engine for the 657G Wheel Tractor-Scraper
CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0774 FMI 08 Sec Throttle Position Sensor signal abnormal
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper
C15 Engine for the 657G Wheel Tractor-Scraper
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C15 Engine for the 657G Wheel Tractor-Scraper
C15 Engine for the 657G Wheel Tractor-Scraper
CID 0717 FMI 02 Remote Throttle Switch Incorrect Inputs
C15 Engine for the 657G Wheel Tractor-Scraper
C15 Engine for the 657G Wheel Tractor-Scraper
CID 1756 FMI 06 Start Aid Indicator short to ground
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0549 FMI 02 Incorrect Throttle Lock Switch inputs
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C15 Engine for the 657G Wheel Tractor-Scraper
C15 Engine for the 657G Wheel Tractor-Scraper
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C15 Engine for the 657G Wheel Tractor-Scraper
C15 Engine for the 657G Wheel Tractor-Scraper
Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines
C11 and C15 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Parts SIS Catalog 365C :
Truck sale:
98,651 USD




