238-2113 WIRING GP-OVERLOAD WARNING S/N MEM224-UP PART OF 230-2680, 230-2686, 249-4605 VALVE AR-BOOM LOWERING CONTROL Type 1 AN ATTACHMENT 365C

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 238-2113 WIRING GP-
1. 238-2113 WIRING GP-
2. 264-0236 WIRING GP-
3. 294-0790 WIRING GP-
4. 294-0790 WIRING GP-
5. 238-2112 WIRING GP-
6. 238-2109 WIRING GP-
7. 296-1831 WIRING GP-

POWER TRAIN

BRAKE GP

8. 135-8852 BRAKE GP-P

DRIVE GP-FINAL

9. 136-2935 DRIVE GP-F
0. INFORMATION

EXCAVATOR 365C EXCAVATOR MEM
365C L Excavator MEM00001-UP (MACHINE) POWERED BY C-15 Engine SEBP4289 365C MEM (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

337-1910 WIRING GP-MACHINE

238-2113 WIRING GP-OVERLOAD WARNING

264-0236 WIRING GP-PANEL

294-0790 WIRING GP-PLATFORM

#SEBP42890330

238-2113: WIRING GP-OVERLOAD WARNING

WIRING GP-OVERLOAD WARNING

238-2113 WIRING GP-OVERLOAD WARNING
S/N MEM224-UP
PART OF 230-2680, 230-2686, 249-4605 VALVE AR-BOOM LOWERING CONTROL
Type 1
AN ATTACHMENT

i02580973 SEBP4289

2382113 WIRING GP-OVERLOAD WARNING Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	238-2215	[1]	SWITCH AS-ROCKER (OVERLOAD WARNING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[4]	TERMINAL (MALE)
3.	238-2355	[1]	HARNESS AS-WIRING (OVERLOAD WARNING)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
4.	238-2533	[1]	BRACKET AS
5.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP42890331

238-2113: WIRING GP-OVERLOAD WARNING

WIRING GP-OVERLOAD WARNING

238-2113 WIRING GP-OVERLOAD WARNING
S/N MEM224-UP
PART OF 230-2680, 230-2686, 249-4605 VALVE AR-BOOM LOWERING CONTROL
Type 2
AN ATTACHMENT

i02580988 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
2.	238-2215	[1]	SWITCH AS-ROCKER (OVERLOAD WARNING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[4]	TERMINAL (MALE)
4.	267-7842 C	[1]	BRACKET AS
5.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
			-OR-
	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
	204-9734	[2]	SPACER (11X18X25-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP42890332

264-0236: WIRING GP-PANEL

WIRING GP-PANEL

264-0236 WIRING GP-PANEL -MACHINE SECURITY SYSTEM
S/N MEM180-UP
PART OF 238-2189 INSTALLATION GP-SECURITY
AN ATTACHMENT

i02574065 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
1.	251-0544 Y	[1]	PANEL GP-SWITCH (ENGINE SPEED, START)
	Y		SEPARATE ILLUSTRATION

#SEBP42890333

294-0790: WIRING GP-PLATFORM

WIRING GP-PLATFORM

294-0790 WIRING GP-PLATFORM
S/N MEM1-UP
PART OF 266-7519 HYDRAULIC AR
Type 1
AN ATTACHMENT

i02921966 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	7K-1181 B	[6]	STRAP-CABLE
2.	116-0118	[1]	CLIP
3.	294-3230	[1]	HARNESS AS-CAB
4.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP42890334

294-0790: WIRING GP-PLATFORM

WIRING GP-PLATFORM

294-0790 WIRING GP-PLATFORM
S/N MEM1-UP
PART OF 266-7519 HYDRAULIC AR
Type 2
AN ATTACHMENT

i03690720 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	7K-1181 BC	[17]	STRAP-CABLE
2.	116-0118	[1]	CLIP
3.	294-3230	[1]	HARNESS AS-CAB
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[19]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[22]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[12]	STRAP-CABLE
	9X-0196	[1]	TERMINAL AS (16-GA)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[9]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[52]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[7]	TERMINAL (FEMALE)
	9W-0852	[20]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[37]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[21]	TERMINAL (MALE)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[76]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8069	[8]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	9X-3401	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4009	[5]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-5010	[2]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	238-2363	[9]	TERMINAL (FEMALE)
	238-2366	[5]	TERMINAL (MALE)
	239-7352	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[3]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
4.	341-0658 C	[1]	HARNESS AS-WIRING
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	230-5009	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
5.	3E-6328 CY	[1]	ALARM GP (24-VOLT)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4189 CM	[1]	BOLT (M8X1.25X20-MM)
8.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
9.	8T-4224 C	[1]	WASHER-HARD (8.8X16X2-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890335

238-2112: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-2112 WIRING GP-REFUELING PUMP
S/N MEM1-UP
PART OF 228-8093 PUMP GP-FUEL TRANSFER
AN ATTACHMENT

i02115104 SEBP4289

2382112 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	111-4836	[3]	CLIP
3.	116-0118	[3]	CLIP
4.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
4A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
5.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
6.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
7.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
8.	238-1637	[1]	HARNESS AS-PUMP (REFUELING)
	3S-2093	[2]	STRAP-CABLE
	116-0126	[1]	HOUSING-PLUG
	121-1038	[1]	HOUSING-RECEPTACLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
9.	238-2440	[1]	WIRE AS
10.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4127 M	[2]	SCREW-MACHINE (M5X0.8X20-MM)
13.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
14.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
15.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
16.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
17.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890336

238-2109: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

238-2109 WIRING GP-WORK TOOL -1-WAY/2-WAY FLOW
S/N MEM1-UP
PART OF 200-6785, 200-6786, 263-3682 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02112605 SEBP4289

2382109 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	238-2389	[1]	HARNESS AS-AUXILIARY
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2.	3S-2093	[7]	STRAP-CABLE
3.	170-6945	[1]	BRACKET AS
4.	7X-2621 M	[2]	BOLT (M10X1.5X12-MM)
5.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART

#SEBP42890337

296-1831: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

296-1831 WIRING GP-WORK TOOL
S/N MEM1-UP
PART OF 266-7519 HYDRAULIC AR
AN ATTACHMENT

i02922120 SEBP4289

2961831 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
1.	3S-2093	[17]	STRAP-CABLE
2.	296-4878	[1]	HARNESS AS-FRONT

#SEBP42890338

135-8852: BRAKE GP-PARKING

BRAKE GP-PARKING

135-8852 BRAKE GP-PARKING
S/N MEM1-UP
PART OF 147-5784 MOTOR GP-TRAVEL

i02338423 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	135-8855	[1]	COVER AS (INCLUDES SEALS)
2.	135-8856	[1]	KIT-SCREW (PARKING BRAKE)
			(INCLUDES BOLT, PLUG & SEALS)
3.	122-5333	[3]	RING
4.	135-8860	[1]	KIT-SEAL (PARKING BRAKE)
			(INCLUDES 2 SEALS)
5.	135-8859	[1]	PLATE AS
6.	135-8854	[1]	PLUG AS
7.	247-8970	[2]	KIT-SCREW (PARKING BRAKE)
8.	247-8971	[1]	KIT-SPRING (PARKING BRAKE)
			(INCLUDES 24-SPRINGS)

#SEBP42890339

136-2935: DRIVE GP-FINAL

DRIVE GP-FINAL

136-2935 DRIVE GP-FINAL -WITH MOTOR
S/N MEM1-UP
PART OF 227-6039 POWER TRAIN AR

i01915856 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	199-4726 CY	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	143-8056 Y	[1]	MOTOR & MTG GP-TRAVEL
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C15 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C15 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0174 FMI 04 Fuel Temperature short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C15 and C18 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C15 and C18 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C15 and C18 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C11 and C15 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C15 and C18 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C15 Engines for Caterpillar Built Machines

Engine Wiring Information
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C15 and C18 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C15 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

Electrical Connectors and Functions
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

CID 0774 FMI 08 Sec Throttle Position Sensor signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

Coolant Flow Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Coolant Level Sensor Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C15 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Indicator Lamp Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0717 FMI 02 Remote Throttle Switch Incorrect Inputs
C15 Engine for the 657G Wheel Tractor-Scraper

CID 1756 FMI 05 Start Aid Indicator open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 1756 FMI 06 Start Aid Indicator short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0549 FMI 02 Incorrect Throttle Lock Switch inputs
C15 and C18 Engines for Caterpillar Built Machines

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C15 and C18 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Throttle Position Sensor Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Engine Wiring Information
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0269 FMI 04 Sensor Supply too low
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0269 FMI 03 Sensor Supply too high
C15 Engine for the 657G Wheel Tractor-Scraper

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C15 and C18 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C15 and C18 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C15 and C18 Engines for Caterpillar Built Machines

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0548 FMI 05 Throttle Lock Lamp open circuit
C15 and C18 Engines for Caterpillar Built Machines

CID 0548 FMI 06 Throttle Lock Lamp short
C15 and C18 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C15 Engine for the 657G Wheel Tractor-Scraper

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C15 Engine for the 657G Wheel Tractor-Scraper

CID 0190 FMI 08 Engine Speed signal abnormal
C15 Engine for the 657G Wheel Tractor-Scraper

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C15 Engine for the 657G Wheel Tractor-Scraper

Engine Shutdown Switch Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Remote Throttle Switch Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Engine Pressure Sensor Open or Short Circuit - Test
C15 Engine for the 657G Wheel Tractor-Scraper

Electrical Connectors - Inspect
C11 and C15 Engines for Caterpillar Built Machines

Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines

Wiring Information
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 365C :

238-2113 WIRING GP-OVERLOAD WARNING

337-1910 WIRING GP-MACHINE

234-5772 WIRING GP-LIGHTING

234-5770 WIRING GP-LIGHTING

266-2230 WIRING GP-FINE SWING

228-6601 WIRING GP-ENGINE

194-8452 WIRING GP-DEMOLITION

234-1007 WIRING GP-COUNTERWEIGHT

238-2113 WIRING GP-OVERLOAD WARNING

264-0236 WIRING GP-PANEL

294-0790 WIRING GP-PLATFORM

238-2112 WIRING GP-REFUELING PUMP

238-2109 WIRING GP-WORK TOOL

296-1831 WIRING GP-WORK TOOL

135-8852 BRAKE GP-PARKING

Truck sale:

Caterpillar 365C
- Crawler Excavators
FINANZAUTO S.A.

149,159

Caterpillar 365C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA

187,176

Caterpillar 365C, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA

179.849

Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung

98,651 USD

Caterpillar 365C, Construction
- Crawler Excavators
FINANZAUTO S.A.
(COMUNIDAD DE MADRID), Spain

238-2113 WIRING GP-OVERLOAD WARNING S/N MEM224-UP PART OF 230-2680, 230-2686, 249-4605 VALVE AR-BOOM LOWERING CONTROL Type 1 AN ATTACHMENT 365C

ELECTRICAL AND STARTING SYSTEM

238-2113: WIRING GP-OVERLOAD WARNING

Parts for your 365C EXCAVATOR:

238-2113: WIRING GP-OVERLOAD WARNING

Parts for your 365C EXCAVATOR:

264-0236: WIRING GP-PANEL

Parts for your 365C EXCAVATOR:

294-0790: WIRING GP-PLATFORM

Parts for your 365C EXCAVATOR:

294-0790: WIRING GP-PLATFORM

Parts for your 365C EXCAVATOR:

238-2112: WIRING GP-REFUELING PUMP

Parts for your 365C EXCAVATOR:

238-2109: WIRING GP-WORK TOOL

Parts for your 365C EXCAVATOR:

296-1831: WIRING GP-WORK TOOL

Parts for your 365C EXCAVATOR:

135-8852: BRAKE GP-PARKING

Parts for your 365C EXCAVATOR:

136-2935: DRIVE GP-FINAL

Parts for your 365C EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 365C :

Truck sale:

Modal