AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

199-4589 DRIVE GP-SWING -WITHOUT MOTOR, RH S/N MEM1-249 PART OF 227-6110 DRIVE GP-SWING 365C EXCAVATOR


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP

EXCAVATOR 365C EXCAVATOR MEM
 365C L Excavator MEM00001-UP (MACHINE) POWERED BY C-15 Engine SEBP4289 365C MEM   (2004)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
DRIVE GP-SWING
199-4589 DRIVE GP-SWING
DRIVE GP-SWING
199-4589 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
DRIVE GP-SWING
227-6110 DRIVE GP-SWING
DRIVE GP-SWING
227-6111 DRIVE GP-SWING
 

#SEBP42890540
 

199-4589: DRIVE GP-SWING

199-4589 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N MEM1-249
PART OF 227-6110 DRIVE GP-SWING
i01638218 SEBP4289
1994589 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
7. 148-4646 [1] PIPE-GAUGE  
8. 231-6864 [1] BREATHER AS (SWING DRIVE)  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 7X-2569 M [16] BOLT (M20X2.5X200-MM)  
14. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
15. 1U-8846 B SEALANT-GASKET  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 136-2892 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
28. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42890541
 

199-4589: DRIVE GP-SWING

199-4589 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N MEM250-UP
PART OF 227-6110 DRIVE GP-SWING
i02458689 SEBP4289
1994589 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
7. 148-4646 [1] PIPE-GAUGE  
8. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 453-2850 M [16] BOLT (M20X2.5X200-MM)  
14. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 296-6229 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 453-3447 M [10] BOLT (M12X1.75X40-MM)  
28. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP42890542
 

199-4590: DRIVE GP-SWING

199-4590 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N MEM1-249
PART OF 227-6111 DRIVE GP-SWING
i01638219 SEBP4289
1994590 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 231-6864 [1] BREATHER AS  
  093-5150 [1] COUPLING-PIPE  
  114-8234 [1] BREATHER (SWING DRIVE)  
  231-6969 [1] NIPPLE-PIPE  
7. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 148-4646 [1] PIPE-GAUGE  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 7X-2569 M [16] BOLT (M20X2.5X200-MM)  
14. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
15. 1U-8846 B SEALANT-GASKET  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 136-2892 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
28. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42890543
 

199-4590: DRIVE GP-SWING

199-4590 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N MEM250-UP
PART OF 227-6111 DRIVE GP-SWING
i02458711 SEBP4289
1994590 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
2. 7Y-0225 [3] SHAFT-PLANETARY  
3. 094-0574 [1] RING-RETAINING  
4. 093-1731 [1] RING-RETAINING  
5. 136-2890 [1] COVER-HOUSING  
6. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
7. 148-4645 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 148-4646 [1] PIPE-GAUGE  
9. 136-2889 [1] GEAR-SUN (23-TEETH)  
10. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
11. 136-2897 [1] GEAR-SUN (22-TEETH)  
12. 136-2891 [1] CARRIER-PLANETARY  
13. 453-2850 M [16] BOLT (M20X2.5X200-MM)  
14. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
17. 136-2896 [1] GEAR-RING (70-TEETH)  
18. 296-6229 [1] CARRIER-PLANETARY  
19. 093-1730 [1] RING-RETAINING  
20. 096-2653 [1] RING-RETAINING  
21. 136-2893 [1] SPACER-SPECIAL  
22. 136-2894 [1] HOUSING  
23. 136-2942 [1] SEAL-O-RING  
24. 135-9044 [2] SEAL-LIP TYPE  
25. 199-4586 [1] SHAFT-PINION  
26. 136-2941 [1] CAGE  
27. 453-3447 M [10] BOLT (M12X1.75X40-MM)  
28. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 136-2940 [1] BEARING  
30. 136-2904 [1] BEARING  
31. 099-5194 [4] PIN-SPRING  
32. 136-2898 [8] WASHER (58.3X89X1-MM THK)  
33. 136-2899 [4] SHAFT-PLANETARY  
34. 136-2900 [8] BEARING-ROLLER  
35. 136-2901 [4] GEAR-PLANETARY (23-TEETH)  
36. 095-0891 [3] PIN-SPRING  
37. 110-7053 [3] GEAR-PLANETARY (23-TEETH)  
38. 7Y-0252 [3] BEARING AS-ROLLER  
39. 6V-7238 [1] VALVE-SHUTOFF  
40. 3K-0360 [1] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP42890544
 

227-6110: DRIVE GP-SWING

227-6110 DRIVE GP-SWING -WITH MOTOR, RH
S/N MEM1-UP
PART OF 227-6039 POWER TRAIN AR
i02100376 SEBP4289
2276110 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4589 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, RH)  
2. 234-4526 Y [1] MOTOR & MTG GP-SWING (RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890545
 

227-6111: DRIVE GP-SWING

227-6111 DRIVE GP-SWING -WITH MOTOR, LH
S/N MEM1-UP
PART OF 227-6039 POWER TRAIN AR
i02100370 SEBP4289
2276111 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4590 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, LH)  
2. 234-4524 Y [1] MOTOR & MTG GP-SWING (LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890546
 

227-0417: FILTER & LINES GP-HYDRAULIC

227-0417 FILTER & LINES GP-HYDRAULIC
S/N MEM1-UP
PART OF 228-8095 FILTER & LINES GP-HYDRAULIC
AN ATTACHMENT
i02115154 SEBP4289
2270417 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6849 Y [1] VALVE GP-CHECK (PILOT)  
3. 191-5650 Y [1] FILTER GP-OIL (HYDRAULIC)  
4. 236-3127 I [1] HOSE AS  
5. 236-3128 I [1] HOSE AS  
6. 236-3131 [1] SUPPORT AS  
7. 087-3591 [2] SPACER (15.5X30X12-MM THK)  
8. 148-8353 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9001 [1] ELBOW  
9. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
10. 150-4043 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
11. 5P-7462 [1] CLIP (SLOT)  
12. 5P-7463 [1] CLIP (TAB)  
13. 6D-4244 [1] CLIP (LOOP)  
14. 6V-0683 [1] GROMMET  
15. 6V-8398 [1] SEAL-O-RING  
16. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [4] NUT (M10X1.5-THD)  
18. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
19. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
20. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
22. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890547
 

228-8095: FILTER & LINES GP-HYDRAULIC

228-8095 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N MEM1-UP
AN ATTACHMENT
i02395212 SEBP4289
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-0417 Y [1] FILTER & LINES GP-HYDRAULIC  
    -OR-
  266-0928 Y [1] FILTER & LINES GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890548
 

266-0928: FILTER & LINES GP-HYDRAULIC

266-0928 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N MEM1-UP
PART OF 228-8095 FILTER & LINES GP-HYDRAULIC
Type 1
AN ATTACHMENT
i02395352 SEBP4289
2660928 FILTER & LINES GP-HYDRAULIC Parts scheme 2660928 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6849 Y [1] VALVE GP-CHECK  
2. 7K-1181 [1] STRAP-CABLE  
3. 087-3591 [2] SPACER (15.5X30X12-MM THK)  
4. 250-0729 Y [1] FILTER GP-OIL (HYDRAULIC)  
5. 266-0929 [1] SUPPORT AS  
6. 266-0931 [1] PLATE  
7. 266-0932 I [1] HOSE AS  
8. 266-0938 I [1] HOSE AS  
9. 266-1068 I [1] HOSE AS  
10. 148-8365 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
11. 148-8372 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8721 [1] ELBOW  
12. 148-8418 [1] REDUCER AS  
  6V-8398 [1] SEAL-O-RING  
  6V-8942 [1] REDUCER-O-RING  
13. 150-4043 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
14. 164-5578 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9175 [1] TEE (FACE SEAL)  
  6V-9746 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
15. 3J-1907 [2] SEAL-O-RING  
16. 6V-0852 [1] CAP-DUST  
17. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
18. 6V-8076 [1] ELBOW  
19. 6V-8398 [1] SEAL-O-RING  
20. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
23. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
25. 9X-6580 [1] NUT (1-3/16-12-THD)  
26. 144-3935 [1] CLIP (LOOP)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42890549
 

266-0928: FILTER & LINES GP-HYDRAULIC

266-0928 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N MEM1-UP
PART OF 228-8095 FILTER & LINES GP-HYDRAULIC
Type 2
AN ATTACHMENT
i03880708 SEBP4289
2660928 FILTER & LINES GP-HYDRAULIC Parts scheme 2660928 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6849 Y [1] VALVE GP-CHECK  
2. 7K-1181 [1] STRAP-CABLE  
3. 087-3591 [2] SPACER (15.5X30X12-MM THK)  
4. 250-0729 Y [1] FILTER GP-OIL (HYDRAULIC)  
5. 266-0929 [1] SUPPORT AS  
6. 266-0931 [1] PLATE  
7. 266-0932 I [1] HOSE AS  
8. 266-0938 I [1] HOSE AS  
9. 266-1068 I [1] HOSE AS  
10. 148-8365 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
11. 148-8372 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8721 [1] ELBOW  
12. 148-8418 [1] REDUCER AS  
  6V-8398 [1] SEAL-O-RING  
  6V-8942 [1] REDUCER-O-RING  
13. 150-4043 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
14. 164-5578 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9175 [1] TEE (FACE SEAL)  
  6V-9746 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
16. 6V-0852 [1] CAP-DUST  
17. 164-5567 C [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
18. 241-6215 C [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8076 [1] ELBOW  
19. 6V-8398 [1] SEAL-O-RING  
20. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
23. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
25. 9X-6580 [1] NUT (1-3/16-12-THD)  
26. 144-3935 [1] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 365C :

DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
CYLINDER GP-STICK
326-4403 CYLINDER GP-STICK
CYLINDER GP-STICK
317-8432 CYLINDER GP-STICK
CYLINDER GP-STICK
179-9794 CYLINDER GP-STICK
CYLINDER GP-HYDRAULIC
259-0871 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
155-9071 CYLINDER GP-HYDRAULIC
CYLINDER GP-COUNTERWEIGHT
150-5913 CYLINDER GP-COUNTERWEIGHT
CYLINDER GP-BUCKET
220-1532 CYLINDER GP-BUCKET
DRIVE GP-SWING
199-4589 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
DRIVE GP-SWING
199-4590 DRIVE GP-SWING
DRIVE GP-SWING
227-6110 DRIVE GP-SWING
DRIVE GP-SWING
227-6111 DRIVE GP-SWING
FILTER & LINES GP-HYDRAULIC
227-0417 FILTER & LINES GP-HYDRAULIC
228-8095 FILTER & LINES GP-HYDRAULIC
FILTER & LINES GP-HYDRAULIC
266-0928 FILTER & LINES GP-HYDRAULIC

Truck sale:

Caterpillar 365C
 
Caterpillar 365C
- Crawler Excavators
FINANZAUTO S.A.
Caterpillar 365C, Crawler Excavators, Construction
149,159 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
Caterpillar 365C, Crawler Excavators, Construction
187,176 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung
179.849 
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung


Caterpillar 365C, Construction
98,651 USD 
Caterpillar 365C, Construction
- Crawler Excavators
FINANZAUTO S.A.
(COMUNIDAD DE MADRID), Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.