AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

478-9866 STARTING MOTOR GP-ELECTRIC S/N TXG1-UP 24-VOLT PART OF 331-6081 STARTING MOTOR GP-ELECTRIC 365C


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 365C EXCAVATOR FEN
 365C L Excavator FEN00001-UP (MACHINE) POWERED BY C-15 Engine SEBP4291 365C FEN   (2004)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
357-7354 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
478-9866 STARTING MOTOR GP-ELECTRIC
 

#SEBP42910360
 

478-9866: STARTING MOTOR GP-ELECTRIC

478-9866 STARTING MOTOR GP-ELECTRIC
S/N TXG1-UP
24-VOLT
PART OF 331-6081 STARTING MOTOR GP-ELECTRIC
i06845765 SEBP4291
4789866 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 533-1539 [1] KIT-SEAL  
    (KIT INCLUDES GASKET, BOOT, O-RINGS, SEAL, & CABLE TIE)
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
14. 3L-3380 [1] BUSHING-TERMINAL  
16. 4M-1853 [1] LEVER AS-SHIFT  
17. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 4M-1831 [4] PLUG-LEVER HOUSING  
20. 4M-1854 [1] SHAFT-LEVER  
23. 272-7152 [1] HOUSING AS-DRIVE  
24. 6N-3826 [1] DRIVE AS-MOTOR  
25. 2H-3429 [1] RING-RETAINING  
26. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
27. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 6N-3279 [1] INSULATOR  
29. 0S-1597 [13] BOLT (1/4-28X1-IN)  
30. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
31. 1H-2629 [3] STRIP-INSULATION  
32. 7M-0324 [1] COIL AS-FIELD  
33. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
34. 7F-3488 [6] SHOE-POLE  
35. 7M-8651 [1] ARMATURE AS  
36. 7M-0325 [1] INSULATOR  
37. 3T-9524 [6] BRUSH AS  
38. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
39. 3R-8801 [1] CLAMP  
40. 8F-1434 [2] LOCKWASHER  
41. 6V-8188 [6] NUT (1/2-13-THD)  
42. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
43. 4B-2049 [6] NUT (10-32-THD)  
44. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
45. 3T-9494 [6] SPRING  
46. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
47. 9G-4101 [1] BUSHING-END  
48. 3T-3424 [3] PLUG-FELT  
49. 3T-3423 [3] CUP  
50. 1M-9968 [1] BUSHING  
51. 511-7982 [1] SOLENOID AS (STARTER)  
  3R-8801 [1] CLAMP  
52. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
53. 4M-1896 [1] BUSHING-TERMINAL  
54. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
55. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42910361
 

547-7976: SWITCH & WIRE GP-FUEL LEVEL

547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N FEN1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
i07202495 SEBP4291
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [18] STRAP-CABLE  
  418-6596 [1] SWITCH AS-LIQUID LEVEL  
  3T-4696 [1] TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW)  
  6A-3361 H WIRE-ELECTRICAL (16-GA)(60-DM)  
  H   ORDER BY THE DECIMETER
 

#SEBP42910362
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N FEN1-UP
PART OF 224-2861 PANEL GP-CIRCUIT BREAKER
i00187759 SEBP4291
7N0718 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 9F-5644 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

#SEBP42910363
 

7N-0719: SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N FEN1-UP
PART OF 227-7133 BATTERY & WIRING GP
AN ATTACHMENT
i00762190 SEBP4291
7N0719 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 9F-5644 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

#SEBP42910364
 

125-1302: SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N FEN1-UP
24-VOLT
PART OF 224-2861 PANEL GP-CIRCUIT BREAKER
i00526676 SEBP4291
1251302 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER  
4. 3B-4504 [2] LOCKWASHER  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP42910365
 

258-0883: SWITCH GP-PRESSURE

258-0883 SWITCH GP-PRESSURE
S/N FEN118-UP
PART OF 255-2953, 324-4066 FILTER & LINES GP-FUEL
i02246432 SEBP4291
2580883 SWITCH GP-PRESSURE Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 9X-7737 [1] SEAL-O-RING  
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 9X-1813 E SLEEVE (14-CM)  
5. 6V-4589 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
 

#SEBP42910366
 

238-1594: SWITCH GP-PUSH BUTTON

238-1594 SWITCH GP-PUSH BUTTON -REFUELING PUMP, START
S/N FEN1-UP
PART OF 238-2112 WIRING GP-REFUELING PUMP
AN ATTACHMENT
i03156560 SEBP4291
2381594 SWITCH GP-PUSH BUTTON Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9442 [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
  1S-0812 [2] SCREW-TAPPING  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (REFUELING PUMP, START)  
2. 238-1595 [1] HARNESS AS-SWITCH (REFUELING PUMP, START)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
3. 125-7875 BCE TUBE-HEAT SHRINK (7.44-MM DIA)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP42910367
 

238-1596: SWITCH GP-PUSH BUTTON

238-1596 SWITCH GP-PUSH BUTTON -REFUELING PUMP, STOP
S/N FEN1-UP
PART OF 238-2112 WIRING GP-REFUELING PUMP
AN ATTACHMENT
i03156580 SEBP4291
2381596 SWITCH GP-PUSH BUTTON Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-4184 [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
  1S-0812 [2] SCREW-TAPPING  
  3E-7389 [1] SWITCH-PUSH BUTTON (REFUELING PUMP, STOP)  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
2. 238-1597 [1] HARNESS AS-SWITCH (REFUELING PUMP, STOP)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
3. 125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)(6-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP42910368
 

5C-6108: SWITCH GP-REFUELING

5C-6108 SWITCH GP-REFUELING -FUEL TANK SHUTOFF
S/N FEN1-UP
PART OF 228-8094 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i00381057 SEBP4291
5C6108 SWITCH GP-REFUELING Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-9236 [1] SWITCH (LIQUID LEVEL)(FUEL)  
2. 5C-6074 [1] FITTING  
3. 2S-4078 [1] SEAL-O-RING  
4. 3D-2824 [1] SEAL-O-RING  
5. 8S-1815 [1] PLUG  
6. 8S-1814 [2] INSULATOR  
7. 4B-2049 [2] NUT (10-32-THD)  
8. 8S-1812 [1] TERMINAL  
9. 9B-4499 [1] SCREW-MACHINE (8-36X0.375-IN)  
10. 7N-9194 [1] RING-TERMINAL (18-GA TO 22-GA)  
11. 7X-3159 E TUBE-HEAT SHRINK (3-CM)  
   
    AVAILABLE REPAIR KIT(S):
  547-7976 Y [1] SWITCH & WIRE GP-FUEL LEVEL  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP42910369
 

334-3018: SWITCH GP-ROCKER

334-3018 SWITCH GP-ROCKER -OVERLOAD WARNING
S/N FEN1-UP
PART OF 328-0098 WIRING GP-OVERLOAD WARNING
AN ATTACHMENT
i03256561 SEBP4291
3343018 SWITCH GP-ROCKER Parts scheme
  For full view, you need register

Parts for your 365C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 328-0028 [1] SWITCH AS-ROCKER (OVERLOAD WARNING)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [4] TERMINAL (MALE)  
 

Information:

Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRIC STARTING MOTOR ON CERTAIN 365C L, 365C L F, 385C, 385C FS, AND 385C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRIC STARTING MOTOR ON CERTAIN 365C L, 365C L F, 385C, 385C FS, AND 385C L EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRIC STARTING MOTOR ON CERTAIN 365C L, 365C L F, 385C, 385C FS, AND 385C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRIC STARTING MOTOR ON CERTAIN 365C L, 365C L F, 385C, 385C FS, AND 385C L EXCAVATORS
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines
Pinion Clearance - Adjust
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
365C Excavator Engine Supplement

Caterpillar Parts SIS Catalog 365C :

STARTING MOTOR GP-ELECTRIC
357-7354 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
331-6081 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
331-6081 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
331-6081 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
273-1682 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
272-7123 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
547-7976 SWITCH & WIRE GP-FUEL LEVEL
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-PRESSURE
258-0883 SWITCH GP-PRESSURE
SWITCH GP-PUSH BUTTON
238-1594 SWITCH GP-PUSH BUTTON
SWITCH GP-PUSH BUTTON
238-1596 SWITCH GP-PUSH BUTTON
SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING

Truck sale:

Caterpillar 365C
 
Caterpillar 365C
- Crawler Excavators
FINANZAUTO S.A.
Caterpillar 365C, Crawler Excavators, Construction
149,159 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
Caterpillar 365C, Crawler Excavators, Construction
187,176 
Caterpillar 365C, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung
179.849 
Caterpillar 365C, Raupenbagger, Bau-Und Bergbauausrüstung


Caterpillar 365C, Construction
98,651 USD 
Caterpillar 365C, Construction
- Crawler Excavators
FINANZAUTO S.A.
(COMUNIDAD DE MADRID), Spain
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.