AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

267-5425 BUCKET AR-FRONT SHOVEL -ROCK, SPILL PLATE, C-FAMILY S/N EAM1-UP 5.7-CU M (7.5-CU YD) CAPACITY AN ATTACHMENT 385C FS


WORK TOOLS
BUCKET GP

EXCAVATOR 385C FS EXCAVATOR EAM
 385C FS Excavator EAM00001-UP (MACHINE) POWERED BY C-18 Engine SEBP4299 385C FS EAM   (2006)

WORK TOOLS

BUCKET GP
267-5408 BUCKET AR-FRONT SHOVEL
267-5417 BUCKET AR-FRONT SHOVEL
267-5425 BUCKET AR-FRONT SHOVEL
267-5427 BUCKET AR-FRONT SHOVEL
BUCKET AS-SEVERE SERVICE SPADE
365-4553 BUCKET AS-SEVERE SERVICE SPADE
BUCKET GP-FRONT SHOVEL
220-1595 BUCKET GP-FRONT SHOVEL
 

#SEBP42990840
 

267-5425: BUCKET AR-FRONT SHOVEL

267-5425 BUCKET AR-FRONT SHOVEL -ROCK, SPILL PLATE, C-FAMILY
S/N EAM1-UP
5.7-CU M (7.5-CU YD) CAPACITY
AN ATTACHMENT
i04030661 SEBP4299
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  267-5426 Y [1] BUCKET GP-FRONT SHOVEL (ROCK)  
  121-1512 Y [2] CYLINDER & SEAL GP-BUCKET  
  235-4908 Y [1] LINES GP-BUCKET (BOTTOM DUMP)  
    -OR-
  348-0293 Y [1] LINES GP-BUCKET (BOTTOM DUMP)  
  241-6653 Y [1] MOUNTING GP-CYLINDER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42990841
 

267-5427: BUCKET AR-FRONT SHOVEL

267-5427 BUCKET AR-FRONT SHOVEL -ROCK, C-FAMILY
S/N EAM1-UP
6.5-CU M (8.5-CU YD) CAPACITY
AN ATTACHMENT
i04082272 SEBP4299
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  267-5428 Y [1] BUCKET GP-FRONT SHOVEL (ROCK)  
  121-1512 Y [2] CYLINDER & SEAL GP-BUCKET  
  235-4908 Y [1] LINES GP-BUCKET (BOTTOM DUMP)  
    -OR-
  348-0293 Y [1] LINES GP-BUCKET (BOTTOM DUMP)  
  241-6653 Y [1] MOUNTING GP-CYLINDER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42990842
 

365-4553: BUCKET AS-SEVERE SERVICE SPADE

365-4553 BUCKET AS-SEVERE SERVICE SPADE -JB-FAMILY
S/N EAM1-UP
2440-MM (96-IN) WIDE X 6-CU M (7.9-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 5
PART OF 362-5284 BUCKET & ADJUSTER GP
AN ATTACHMENT
i04038511 SEBP4299
3654553 BUCKET AS-SEVERE SERVICE SPADE Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 360-5998 [1] EDGE AS  
1A. 8P-9770 [1] PLATE  
1B. 357-6516 [5] ADAPTER (CENTER)  
2. 360-6008 [2] PLATE-WEAR  
3. 360-6012 [1] PLATE-WEAR  
4. 360-6016 [4] PLATE-WEAR  
5. 360-6020 [5] PLATE-WEAR  
6. 365-4554 [1] PLATE AS-HINGE  
 

#SEBP42990843
 

220-1595: BUCKET GP-FRONT SHOVEL

220-1595 BUCKET GP-FRONT SHOVEL -HEAVY-DUTY
S/N EAM1-UP
4.6-CU M (6.0-CU YD) CAPACITY. J-700 ADAPTERS, QTY OF 6
PART OF 220-1594 BUCKET AR-FRONT SHOVEL
AN ATTACHMENT
i02225989 SEBP4299
2201595 BUCKET GP-FRONT SHOVEL Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-9377 [2] PIN  
2. 4E-9379 [2] CAP  
3. 095-0948 [4] FITTING-GREASE  
4. 157-9925 [1] BOWL & BEARING AS  
4A. 4E-9374 [4] BEARING (106.2-MM OD)  
4B. 4E-9376 [2] BEARING (154.27-MM OD)  
4C. 8P-9770 [1] PLATE  
4D. 171-1705 [3] ADAPTER-TIP (RH)  
  171-1706 [3] ADAPTER-TIP (LH)  
5. 177-0796 [2] PLATE AS  
6. 215-4360 [1] BULLDOZER & BEARING AS  
6A. 4E-9380 [4] BEARING (154.27-MM OD)  
6B. 4E-9408 [4] BEARING (140.26-MM OD)  
6C. 122-6566 [4] BUSHING  
6D. 188-2258 [2] BEARING (190.31-MM OD)  
7. 279-8094 [1] PLATE (RH)  
8. 279-8095 [1] PLATE (LH)  
9. 187-9753 [4] SEAL  
10. 328-1908 [6] WASHER  
11. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
12. 8T-4183 CM [12] BOLT (M12X1.75X40-MM)  
13. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 9X-4600 [4] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP42990844
 

235-4945: BUCKET GP-FRONT SHOVEL

235-4945 BUCKET GP-FRONT SHOVEL -ROCK
S/N EAM1-UP
2760-MM (109-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY. J-700 ADAPTERS, QTY OF 6
PART OF 235-4944 BUCKET AR-FRONT SHOVEL
AN ATTACHMENT
i02226081 SEBP4299
2354945 BUCKET GP-FRONT SHOVEL Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-4910 [1] BULLDOZER & BEARING AS  
1A. 4E-9380 [4] BEARING (154.27-MM OD)  
1B. 4E-9408 [4] BEARING (140.26-MM OD)  
1C. 122-6566 [4] BUSHING  
1D. 188-2258 [2] BEARING (190.31-MM OD)  
2. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
3. 235-4946 [1] BOWL & BEARING AS-BUCKET  
3A. 4E-9374 [4] BEARING (106.2-MM OD)  
3B. 4E-9376 [2] BEARING (154.27-MM OD)  
3C. 8P-9770 [1] PLATE  
3D. 171-1705 [3] ADAPTER-TIP (RH)  
  171-1706 [3] ADAPTER-TIP (LH)  
4. 4E-9379 [2] CAP  
5. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
6. 4E-9377 [2] PIN  
7. 9X-4600 [4] SEAL-LIP TYPE  
8. 187-9753 [4] SEAL  
9. 166-9390 [2] DEFLECTOR  
10. 7T-5947 [6] WASHER-RETAINING (13.5X55X10-MM THK)  
11. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
13. 177-0796 [2] PLATE AS  
  M   METRIC PART
 

#SEBP42990845
 

241-6608: BUCKET GP-FRONT SHOVEL

241-6608 BUCKET GP-FRONT SHOVEL -HEAVY-DUTY ROCK
S/N EAM1-UP
2760-MM (109-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY
PART OF 241-6607 BUCKET AR-FRONT SHOVEL
AN ATTACHMENT
i02364718 SEBP4299
2416608 BUCKET GP-FRONT SHOVEL Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 4E-9377 [2] PIN  
3. 4E-9379 [2] CAP  
4. 166-9390 [2] DEFLECTOR  
5. 177-0796 [2] PLATE AS  
6. 187-9753 [4] SEAL  
7. 202-5058 [6] SPACER (13.5X22.5X16-MM THK)  
8. 235-4910 [1] BULLDOZER & BEARING AS  
8A. 4E-9380 [4] BEARING (154.27-MM OD)  
8B. 4E-9408 [4] BEARING (140.26-MM OD)  
8C. 122-6566 [4] BUSHING  
8D. 188-2258 [2] BEARING (190.31-MM OD)  
9. 241-6609 Y [1] BOWL GP (EXCAVATOR)  
10. 7T-5947 [6] WASHER-RETAINING (13.5X55X10-MM THK)  
11. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
12. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
13. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 9X-4600 [4] SEAL-LIP TYPE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42990846
 

241-6625: BUCKET GP-FRONT SHOVEL

241-6625 BUCKET GP-FRONT SHOVEL -HEAVY-DUTY ROCK
S/N EAM1-UP
2760-MM (109-IN) WIDE X 5.2-CU M (6.8-CU YD) CAPACITY
PART OF 241-6624 BUCKET AR-FRONT SHOVEL
AN ATTACHMENT
i02364728 SEBP4299
2416625 BUCKET GP-FRONT SHOVEL Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 4E-9377 [2] PIN  
3. 4E-9379 [2] CAP  
4. 166-9390 [2] DEFLECTOR  
5. 177-0796 [2] PLATE AS  
6. 187-9753 [4] SEAL  
7. 9X-4600 [4] SEAL-LIP TYPE  
8. 235-4910 [1] BULLDOZER & BEARING AS  
8A. 4E-9380 [4] BEARING (154.27-MM OD)  
8B. 4E-9408 [4] BEARING (140.26-MM OD)  
8C. 122-6566 [4] BUSHING  
8D. 188-2258 [2] BEARING (190.31-MM OD)  
9. 241-6626 Y [1] BOWL GP (EXCAVATOR)  
10. 7T-5947 [6] WASHER-RETAINING (13.5X55X10-MM THK)  
11. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
12. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
13. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42990847
 

241-6641: BUCKET GP-FRONT SHOVEL

241-6641 BUCKET GP-FRONT SHOVEL -ROCK
S/N EAM1-UP
5.7-CU M (7.5-CU YD) CAPACITY. J-700 ADAPTERS, QTY OF 6
PART OF 241-6640 BUCKET AR-FRONT SHOVEL
AN ATTACHMENT
i02364856 SEBP4299
2416641 BUCKET GP-FRONT SHOVEL Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 241-6642 [1] BULLDOZER & BEARING AS  
1A. 4E-9380 [4] BEARING (154.27-MM OD)  
1B. 4E-9408 [4] BEARING (140.26-MM OD)  
1C. 122-6566 [4] BUSHING  
1D. 188-2258 [2] BEARING (190.31-MM OD)  
1E. 152-7784 [2] PLATE-WEAR  
3. 235-4946 [1] BOWL & BEARING AS-BUCKET  
3A. 4E-9374 [4] BEARING (106.2-MM OD)  
3B. 4E-9376 [2] BEARING (154.27-MM OD)  
4. 235-4932 [6] PLATE-WEAR  
5. 235-4939 [1] EDGE AS  
5A. 8P-9770 [1] PLATE  
5B. 171-1705 [3] ADAPTER-TIP (RH)  
5C. 171-1706 [3] ADAPTER-TIP (LH)  
6. 4E-9377 [2] PIN  
7. 9X-4600 [4] SEAL-LIP TYPE  
8. 187-9753 [4] SEAL  
9. 166-9390 [2] DEFLECTOR  
10. 7T-5947 [6] WASHER-RETAINING (13.5X55X10-MM THK)  
11. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
13. 177-0796 [2] PLATE AS  
14. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
15. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
16. 4E-9379 [2] CAP  
  M   METRIC PART
 

#SEBP42990848
 

267-5385: BUCKET GP-FRONT SHOVEL

267-5385 BUCKET GP-FRONT SHOVEL -HEAVY-DUTY, C-FAMILY
S/N EAM1-UP
4.6-CU M (6.0-CU YD) CAPACITY. K-170 ADAPTERS, QTY OF 6
PART OF 267-5384 BUCKET AR-FRONT SHOVEL
Type 1
AN ATTACHMENT
i02364574 SEBP4299
2675385 BUCKET GP-FRONT SHOVEL Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 4E-9377 [2] PIN  
3. 4E-9379 [2] CAP  
4. 166-9390 [2] DEFLECTOR  
5. 177-0796 [2] PLATE AS  
6. 187-9753 [4] SEAL  
7. 202-5058 [6] SPACER (13.5X22.5X16-MM THK)  
8. 215-4360 [1] BULLDOZER & BEARING AS  
8A. 4E-9380 [4] BEARING (154.27-MM OD)  
8B. 4E-9408 [4] BEARING (140.26-MM OD)  
8C. 122-6566 [4] BUSHING  
8D. 188-2258 [2] BEARING (190.31-MM OD)  
8E. 152-7784 [2] PLATE-WEAR  
9. 267-5386 [1] BOWL & BEARING AS  
9A. 4E-9374 [4] BEARING (106.2-MM OD)  
9B. 4E-9376 [2] BEARING (154.27-MM OD)  
9C. 8P-9770 [1] PLATE  
9D. 232-2170 [4] ADAPTER-TIP (K-170, 2-STRAP, CENTER)  
9E. 232-2171 [1] ADAPTER-TIP (K-170, 2-STRAP, RH)  
9F. 232-2172 [1] ADAPTER-TIP (K-170, 2-STRAP, LH)  
9G. [5] PLATE-WEAR  
10. 7T-5947 [6] WASHER-RETAINING (13.5X55X10-MM THK)  
11. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
12. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
13. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 9X-4600 [4] SEAL-LIP TYPE  
  M   METRIC PART
 

#SEBP42990849
 

267-5385: BUCKET GP-FRONT SHOVEL

267-5385 BUCKET GP-FRONT SHOVEL -HEAVY-DUTY, C-FAMILY
S/N EAM1-UP
4.6-CU M (6.0-CU YD) CAPACITY. K-170 ADAPTERS, QTY OF 6
PART OF 267-5384 BUCKET AR-FRONT SHOVEL
Type 2
AN ATTACHMENT
i02575310 SEBP4299
2675385 BUCKET GP-FRONT SHOVEL Parts scheme
  For full view, you need register

Parts for your 385C FS EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-9377 [2] PIN  
2. 4E-9379 [2] CAP  
3. 095-0948 C [4] FITTING-GREASE  
4. 177-0796 [2] PLATE AS  
5. 187-9753 [4] SEAL  
6. 215-4360 [1] BULLDOZER & BEARING AS  
6A. 4E-9380 [4] BEARING (154.27-MM OD)  
6B. 4E-9408 [4] BEARING (140.26-MM OD)  
6C. 122-6566 [4] BUSHING  
6D. 188-2258 [2] BEARING (190.31-MM OD)  
6E. 152-7784 [2] PLATE-WEAR  
7. 267-5386 [1] BOWL & BEARING AS  
7A. 4E-9374 [4] BEARING (106.2-MM OD)  
7B. 4E-9376 [2] BEARING (154.27-MM OD)  
7C. 267-5392 [1] EDGE AS  
7D. 232-2170 [4] ADAPTER-TIP (K-170, 2-STRAP, CENTER)  
7E. 232-2171 [1] ADAPTER-TIP (K-170, 2-STRAP, RH)  
7F. 232-2172 [1] ADAPTER-TIP (K-170, 2-STRAP, LH)  
7G. [5] PLATE-WEAR  
7H. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8. 279-8094 C [1] PLATE (RH)  
9. 279-8095 C [1] PLATE (LH)  
10. 328-1908 [6] WASHER  
11. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
12. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
13. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 9X-4600 [4] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Boom, Stick and Bucket Operation
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Boom, Stick and Bucket Linkage - Lubricate
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Boom, Stick and Bucket Linkage - Lubricate
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Bucket - Remove and Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Boom/Stick/Bucket Combinations
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Conversion of Front Shovel Buckets from J Series Base Edge Assemblies to the K Series{6001}
Conversion of Front Shovel Buckets from J Series Base Edge Assemblies to the K Series{6001}
Rework of the Cylinder Holes On Front Shovel Bucket Bulldozer Assemblies{6514}
Rework of the Cylinder Holes On Front Shovel Bucket Bulldozer Assemblies{6514}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM TO REWORK THE (CYLINDER) HOLES ON CERTAIN 385C FRONT SHOVEL BUCKET BULLDOZER ASSEMBLIES
PRODUCT SUPPORT PROGRAM TO REWORK THE (CYLINDER) HOLES ON CERTAIN 385C FRONT SHOVEL BUCKET BULLDOZER ASSEMBLIES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Bucket Adjuster
385C Excavator and 385C Front Shovel Machine System Specifications
Bucket - Front Shovel
385C Excavator and 385C Front Shovel Machine System Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Letter-China
PRODUCT SUPPORT PROGRAM TO REWORK THE (CYLINDER) HOLES ON CERTAIN 385C FRONT SHOVEL BUCKET BULLDOZER ASSEMBLIES
PRODUCT SUPPORT PROGRAM TO REWORK THE (CYLINDER) HOLES ON CERTAIN 385C FRONT SHOVEL BUCKET BULLDOZER ASSEMBLIES
Service Letter-Asia
Service Letter-APD
Service Magazine
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
An Improved Front Shovel Bucket is Now Available for Certain 385C Excavators {6514}
2015/03/11
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}

Caterpillar Parts SIS Catalog 385C FS :

267-5417 BUCKET AR-FRONT SHOVEL
267-5408 BUCKET AR-FRONT SHOVEL
267-5394 BUCKET AR-FRONT SHOVEL
BUCKET AR-FRONT SHOVEL
267-5384 BUCKET AR-FRONT SHOVEL
267-5384 BUCKET AR-FRONT SHOVEL
241-6640 BUCKET AR-FRONT SHOVEL
241-6624 BUCKET AR-FRONT SHOVEL
241-6607 BUCKET AR-FRONT SHOVEL
267-5427 BUCKET AR-FRONT SHOVEL
BUCKET AS-SEVERE SERVICE SPADE
365-4553 BUCKET AS-SEVERE SERVICE SPADE
BUCKET GP-FRONT SHOVEL
220-1595 BUCKET GP-FRONT SHOVEL
BUCKET GP-FRONT SHOVEL
235-4945 BUCKET GP-FRONT SHOVEL
BUCKET GP-FRONT SHOVEL
241-6608 BUCKET GP-FRONT SHOVEL
BUCKET GP-FRONT SHOVEL
241-6625 BUCKET GP-FRONT SHOVEL
BUCKET GP-FRONT SHOVEL
241-6641 BUCKET GP-FRONT SHOVEL
BUCKET GP-FRONT SHOVEL
267-5385 BUCKET GP-FRONT SHOVEL

Truck sale:

Caterpillar 385CFS, Construction
On Request 
Caterpillar 385CFS, Construction
- Crawler Excavators
ZEPPELIN BAUMASCHINEN
Germany
CAT 385C FS
Call 
CAT 385C FS

Best Machinery Holland BV
Rotterdam, The Netherlands
CATERPILLAR 385CFS 2007
$121,445 USD 
CATERPILLAR 385CFS 2007
- TRACK EXCAVATORS
BORUSAN MAKINA
Cumhuriyet Mh. Güney Yanyol cd. No:26 Gebze - Kocaeli
CAT 385C FS
Call 
CAT 385C FS

Best Machinery Holland BV
Rotterdam, The Netherlands
CAT 385C FS
Call 
CAT 385C FS

Best Machinery Holland BV
Rotterdam, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.