ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
CONTROL GP-UNPROGRAMMED
ELECTRICAL AND STARTING SYSTEM
ALARM GP#SEBP43020260
3E-6328: ALARM GP
3E-6328 ALARM GP
S/N B9L1-UP
24-VOLT
PART OF 363-1235 ALARM GP, 291-2910, 319-8714, 351-7026, 372-6063 WIRING GP-CAB
S/N B9L1-UP
24-VOLT
PART OF 363-1235 ALARM GP, 291-2910, 319-8714, 351-7026, 372-6063 WIRING GP-CAB
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS#SEBP43020261
177-9953: ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N B9L1-UP
24-VOLT, 80-AMPERE
PART OF 233-3371, 233-3388 ALTERNATOR GP-CHARGING
S/N B9L1-UP
24-VOLT, 80-AMPERE
PART OF 233-3371, 233-3388 ALTERNATOR GP-CHARGING
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS (ALTERNATOR) | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 423-2775 | [1] | STATOR AS (24-VOLT, 95-AMPERE)(ALTERNATOR) | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS (ALTERNATOR) | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 J | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 J | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 J | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 199-7891 J | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT) | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES 3 BEARINGS) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET & NUT) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLTS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP43020262
233-3371: ALTERNATOR GP-CHARGING
233-3371 ALTERNATOR GP-CHARGING -WITHOUT AIR CONDITIONER
S/N B9L1-UP
80-AMPERE
CANNOT BE USED WITH @@@@@246-1114@@@@@, @@@@@233-3388@@@@@, @@@@@247-3372@@@@@
S/N B9L1-UP
80-AMPERE
CANNOT BE USED WITH @@@@@246-1114@@@@@, @@@@@233-3388@@@@@, @@@@@247-3372@@@@@
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 354-0672 | [1] | PULLEY AS-IDLER | |
| 2. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 3. | 145-2901 | [1] | COVER-DUST | |
| 4. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 5. | 211-2101 | [2] | SLEEVE | |
| 6. | 216-6967 | [1] | SUPPORT | |
| 7. | 222-2880 | [1] | BELT TENSIONER | |
| 8. | 348-7888 | [1] | BELT-SERPENTINE | |
| 9. | 249-7698 | [1] | SPACER-SPECIAL | |
| 10. | 262-9215 | [1] | FILM-INSTRUCTION (BELT ROUTING) | |
| 11. | 264-7021 | [1] | GUARD AS-BELT | |
| 8R-8088 | [2] | SPACER (11.66X15.88X18-MM THK) | ||
| 12. | 270-1656 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 293-3929 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 14. | 085-8091 M | [1] | BOLT (M10X1.5X55-MM) | |
| 15. | 5P-2424 | [1] | BOLT (1/2-13X2.25-IN) | |
| 16. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 19. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 20. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 21. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 23. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43020263
233-3388: ALTERNATOR GP-CHARGING
233-3388 ALTERNATOR GP-CHARGING -WITH AIR CONDITIONER
S/N B9L1-UP
80-AMPERE
CANNOT BE USED WITH @@@@@233-3371@@@@@, @@@@@246-1114@@@@@, @@@@@247-3372@@@@@
S/N B9L1-UP
80-AMPERE
CANNOT BE USED WITH @@@@@233-3371@@@@@, @@@@@246-1114@@@@@, @@@@@247-3372@@@@@
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 354-0672 | [1] | PULLEY AS-IDLER | |
| 2. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 3. | 145-2901 | [1] | COVER-DUST | |
| 4. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 5. | 348-7886 | [1] | BELT-SERPENTINE | |
| 6. | 211-2101 | [2] | SLEEVE | |
| 7. | 216-6967 | [1] | SUPPORT | |
| 8. | 222-2880 | [1] | BELT TENSIONER | |
| 9. | 249-7698 | [1] | SPACER-SPECIAL | |
| 10. | 262-9222 | [1] | FILM-INSTRUCTION (ALTERNATOR BELT MOUNTING) | |
| 11. | 264-7021 | [1] | GUARD AS-BELT | |
| 8R-8088 | [2] | SPACER (11.66X15.88X18-MM THK) | ||
| 12. | 270-1656 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 085-8091 M | [1] | BOLT (M10X1.5X55-MM) | |
| 14. | 5P-2424 | [1] | BOLT (1/2-13X2.25-IN) | |
| 15. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 17. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 18. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 19. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 21. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43020264
246-1114: ALTERNATOR GP-CHARGING
246-1114 ALTERNATOR GP-CHARGING -WITHOUT AIR CONDITIONER
S/N B9L1-UP
150-AMPERE
CANNOT BE USED WITH @@@@@233-3371@@@@@, @@@@@233-3388@@@@@
S/N B9L1-UP
150-AMPERE
CANNOT BE USED WITH @@@@@233-3371@@@@@, @@@@@233-3388@@@@@
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 354-0672 | [1] | PULLEY AS-IDLER | |
| 2. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 3. | 145-2901 | [1] | COVER-DUST | |
| 4. | 211-2101 | [2] | SLEEVE | |
| 5. | 216-6967 | [1] | SUPPORT | |
| 6. | 222-2880 | [1] | BELT TENSIONER | |
| 8. | 348-7888 | [1] | BELT-SERPENTINE (ALTERNATOR) | |
| 9. | 249-7698 | [1] | SPACER-SPECIAL | |
| 10. | 262-9215 | [1] | FILM-INSTRUCTION (BELT ROUTING) | |
| 11. | 085-8091 M | [1] | BOLT (M10X1.5X55-MM) | |
| 12. | 249-0313 | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE) | |
| 13. | 5P-2424 | [1] | BOLT (1/2-13X2.25-IN) | |
| 14. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 17. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 19. | 8T-4196 M | [5] | BOLT (M10X1.5X35-MM) | |
| 20. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 22. | 293-3929 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 23. | 270-1656 | [1] | BRACKET AS | |
| 24. | 264-7021 | [1] | GUARD AS-BELT | |
| 8R-8088 | [2] | SPACER (11.66X15.88X18-MM THK) | ||
| 25. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP43020265
247-3372: ALTERNATOR GP-CHARGING
247-3372 ALTERNATOR GP-CHARGING -WITH AIR CONDITIONER
S/N B9L1-UP
150-AMPERE
PART OF 242-9549, 350-0676, 396-7445, 565-1025 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@233-3371@@@@@, @@@@@246-1114@@@@@, @@@@@233-3388@@@@@
S/N B9L1-UP
150-AMPERE
PART OF 242-9549, 350-0676, 396-7445, 565-1025 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@233-3371@@@@@, @@@@@246-1114@@@@@, @@@@@233-3388@@@@@
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 354-0672 | [1] | PULLEY AS-IDLER | |
| 2. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 3. | 145-2901 | [1] | COVER-DUST | |
| 4. | 348-7886 | [1] | BELT-SERPENTINE | |
| 5. | 211-2101 | [2] | SLEEVE | |
| 6. | 216-6967 | [1] | SUPPORT | |
| 7. | 222-2880 | [1] | BELT TENSIONER | |
| 8. | 249-7698 | [1] | SPACER-SPECIAL | |
| 9. | 262-9222 | [1] | FILM-INSTRUCTION (ALTERNATOR BELT MOUNTING) | |
| 10. | 264-7021 | [1] | GUARD AS-BELT | |
| 8R-8088 | [2] | SPACER (11.66X15.88X18-MM THK) | ||
| 11. | 270-1656 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 12. | 085-8091 M | [1] | BOLT (M10X1.5X55-MM) | |
| 13. | 249-0313 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE) | |
| 14. | 5P-2424 | [1] | BOLT (1/2-13X2.25-IN) | |
| 15. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 17. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 18. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 19. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 21. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43020266
249-0313: ALTERNATOR GP-CHARGING
249-0313 ALTERNATOR GP-CHARGING
S/N B9L1-UP
24-VOLT, 150-AMPERE
PART OF 247-3372 ALTERNATOR GP-CHARGING
FOR USE WITH C9 INDUSTRAL ENGINES WITH 24V-150 AMP ALTERNATOR, C27 / C32 INDUSTRIAL ENGINES
S/N B9L1-UP
24-VOLT, 150-AMPERE
PART OF 247-3372 ALTERNATOR GP-CHARGING
FOR USE WITH C9 INDUSTRAL ENGINES WITH 24V-150 AMP ALTERNATOR, C27 / C32 INDUSTRIAL ENGINES
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 478-4949 | [1] | FRAME-DRIVE END | |
| 2. | 478-4950 | [1] | FAN AS | |
| 3. | 478-4951 | [1] | FRAME-REAR | |
| 4. | 478-4953 | [1] | COVER AS-ALTERNATOR | |
| 5. | 185-2647 | [1] | GROMMET | |
| 6. | 478-4955 | [1] | STATOR AS | |
| 7. | 185-2646 | [1] | BUSHING | |
| 8. | 185-2654 | [1] | PLATE | |
| 9. | 478-4958 | [1] | ROTOR AS | |
| 10. | 478-4959 | [1] | COIL AS | |
| 11. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT) | |
| 12. | 478-4961 | [1] | KIT-COLLAR | |
| (INCLUDES COLLARS) | ||||
| 13. | 478-4962 | [1] | KIT-BEARING | |
| (INCLUDES BEARINGS) | ||||
| 14. | 478-4963 | [1] | KIT-HARDWARE | |
| (INCLUDES BOLTS & TERMINAL PLATE) | ||||
| 15. | 478-4964 | [1] | KIT-TERMINAL | |
| (INCLUDES HOLDER AS, TERMINAL PLATE, INSULATION BUSH, TERMINAL PIN, GROMMET & NUT) | ||||
| 16. | 478-4967 | [1] | KIT-TERMINAL | |
| (INCLUDES INSULATION BUSHES, PLATE WASHERS. SPRING WASHERS & NUTS) | ||||
#SEBP43020267
275-9651: APPLICATION GP-COMMUNICATION
275-9651 APPLICATION GP-COMMUNICATION -PRODUCT LINK 300
S/N B9L1-UP
PART OF 313-6837 INSTALLATION GP-COMMUNICATION
S/N B9L1-UP
PART OF 313-6837 INSTALLATION GP-COMMUNICATION
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-9954 Y | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK 300) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43020268
463-9613: APPLICATION GP-MONITOR
463-9613 APPLICATION GP-MONITOR -PLE601 NETWORK MANAGER
S/N B9L1-UP
PART OF 456-3346, 456-3347, 456-3348 CONTROL GP-COMMUNICATION
S/N B9L1-UP
PART OF 456-3346, 456-3347, 456-3348 CONTROL GP-COMMUNICATION
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 459-0786 Y | [1] | CONTROL GP-COMMUNICATION (NETWORK MANAGER) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43020269
463-9614: APPLICATION GP-MONITOR
463-9614 APPLICATION GP-MONITOR -PL641I CELLULAR
S/N B9L1-UP
PART OF 456-3347, 456-3348 CONTROL GP-COMMUNICATION
FIELD REPLACEMENT ORDER @@@@@555-5509@@@@@
S/N B9L1-UP
PART OF 456-3347, 456-3348 CONTROL GP-COMMUNICATION
FIELD REPLACEMENT ORDER @@@@@555-5509@@@@@
Parts for your 160M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 440-2104 Y | [1] | CONTROL GP-ELECTRONIC (PL641I CELLULAR) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALARM GP
Operation and Maintenance Manual
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
Troubleshooting
Service Magazine




