233-3125 WIRING GP-LIGHTING -ROOF S/N B9L1-UP FOR USE WITH @@@@@238-8825@@@@@ 160M MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 233-3125 WIRING GP-
1. 291-2909 WIRING GP-
2. 292-1874 WIRING GP-
3. 253-1964 WIRING GP-
4. 253-1964 WIRING GP-
5. 253-1967 WIRING GP-
6. 360-5872 WIRING GP-
7. 233-4601 WIRING GP-
8. 233-4601 WIRING GP-
9. 233-4601 WIRING GP-
0. INFORMATION

MOTOR GRADER 160M MOTOR GRADER B9L
160M Motor Grader B9L00001-UP (MACHINE) POWERED BY C9 Engine SEBP4302 160M B9L (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-3131 WIRING GP-HEATER

269-3410 WIRING GP-HEATER

233-3125 WIRING GP-LIGHTING

291-2909 WIRING GP-LIGHTING

292-1874 WIRING GP-LIGHTING

253-1964 WIRING GP-MONITOR

#SEBP43020590

233-3125: WIRING GP-LIGHTING

WIRING GP-LIGHTING

233-3125 WIRING GP-LIGHTING -ROOF
S/N B9L1-UP
FOR USE WITH @@@@@238-8825@@@@@

i02193585 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[22]	STRAP-CABLE
2.	234-4325 Y	[2]	LAMP GP-FLOOD (24-VOLT)
3.	234-4326 Y	[2]	LAMP GP-FLOOD (24-VOLT)
4.	235-6180	[1]	HARNESS AS-LIGHTING
	102-8802	[10]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
5.	249-5488	[1]	SWITCH AS-ROCKER (FLOODLIGHT)(FLOODLIGHT)
6.	7X-0605	[4]	WASHER-HARD (13X28X1.6-MM THK)
	Y		SEPARATE ILLUSTRATION

#SEBP43020591

291-2909: WIRING GP-LIGHTING

WIRING GP-LIGHTING

291-2909 WIRING GP-LIGHTING -FLOODLIGHTS, WARNING BEACON
S/N B9L1-481
PART OF 254-5399 CAB AR

i02609995 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[34]	STRAP-CABLE
2.	291-2908	[1]	HARNESS AS-LIGHTING
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[14]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[14]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)

#SEBP43020592

292-1874: WIRING GP-LIGHTING

WIRING GP-LIGHTING

292-1874 WIRING GP-LIGHTING -WORK LIGHTS
S/N B9L1-481
PART OF 254-5399 CAB AR

i02567556 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	292-1868	[1]	HARNESS AS-LIGHTING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)

#SEBP43020593

253-1964: WIRING GP-MONITOR

WIRING GP-MONITOR

253-1964 WIRING GP-MONITOR -CD700
S/N B9L1-UP
PART OF 292-7975 DISPLAY AR-MONITOR, 347-0920 GRADE CONTROL AR, 323-8139 SENSOR AR-GRADE
Type 1

i02636552 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	140-7480	[1]	BRACKET-MOUNTING
3.	167-8610	[1]	BRACKET AS
4.	222-9151	[2]	WASHER-HARD (11X32X5-MM THK)
5.	245-8334	[2]	KNOB
6.	252-5190	[1]	HARNESS AS-FRONT CHASSIS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	248-5358	[1]	PLUG AS-CONNECTOR (39-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7.	253-1963	[1]	BRACKET AS
8.	253-7461	[1]	HARNESS AS-RADIO
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	167-8987	[1]	PLUG AS-CONNECTOR (8-PIN)
9.	273-1719	[1]	BRACKET AS
10.	273-5924	[1]	KNOB
11.	295-8369	[1]	PLATE
12.	295-8370	[1]	BRACKET AS
	7T-1099	[2]	LINK
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
	9X-2032 M	[4]	NUT-WELD (M4X0.7-THD)
13.	295-8381	[1]	PLATE AS
14.	296-1067	[1]	HARNESS AS-WIRING (LIGHT BAR)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	230-5008	[3]	PLUG AS-CONNECTOR (4-PIN)
15.	300-7909	[1]	BRACKET AS
	205-7047 M	[2]	INSERT-THREADED (M4X0.7-THD)
16.	114-6658	[2]	WASHER (6.5X17X1-MM THK)
17.	096-6166	[6]	WASHER-HARD (4.5X9X1-MM THK)
18.	117-8929	[1]	WASHER (6.6X22X2-MM THK)
19.	130-5300	[2]	CLIP
20.	204-0813	[3]	BOLT (M6X1X40-MM)
21.	3B-4610	[2]	PIN-COTTER
22.	4L-7125	[4]	LOCKWASHER
23.	5C-7261 M	[2]	NUT (M8X1.25-THD)
24.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
25.	5P-6419	[1]	GROMMET
26.	5S-7349	[2]	BOLT (1/4-20X0.5-IN)
27.	6B-8193	[2]	PIN-CLEVIS
28.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
29.	8C-5607	[6]	MOUNT-ISOLATION
30.	8C-5608	[3]	SPACER (6.5X9.5X25.4-MM THK)
31.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
32.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
33.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
34.	8T-7852 M	[6]	BOLT (M4X0.7X10-MM)
35.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
36.	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
37.	9X-6165	[3]	WASHER (6.5X22X2.5-MM THK)
38.	5P-7657 D		SEAL (0.2-M)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP43020594

253-1964: WIRING GP-MONITOR

WIRING GP-MONITOR

253-1964 WIRING GP-MONITOR -CD700
S/N B9L1-UP
PART OF 292-7975 DISPLAY AR-MONITOR, 347-0920 GRADE CONTROL AR, 323-8139 SENSOR AR-GRADE
Type 2

i05016071 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
4.	222-9151	[2]	WASHER-HARD (11X32X5-MM THK)
5.	245-8334	[2]	KNOB
6.	252-5190	[1]	HARNESS AS-FRONT CHASSIS
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[8]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	248-5358	[1]	PLUG AS-CONNECTOR (39-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7.	253-1963	[1]	BRACKET AS
8.	253-7461	[1]	HARNESS AS-RADIO
	8T-8737	[4]	PLUG-SEAL
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	268-3371	[1]	CAP AS-CONNECTOR
	363-7105	[1]	GROMMET
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	167-8987	[1]	PLUG AS-CONNECTOR (8-PIN)
9.	273-1719	[1]	BRACKET AS
10.	273-5924	[1]	KNOB
11.	295-8369	[1]	PLATE
12.	295-8370	[1]	BRACKET AS
	7T-1099	[2]	LINK
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
	9X-2032 M	[4]	NUT-WELD (M4X0.7-THD)
13.	295-8381	[1]	PLATE AS
14.	296-1067	[1]	HARNESS AS-WIRING (LIGHT BAR)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	230-5008	[3]	PLUG AS-CONNECTOR (4-PIN)
			(EACH INCLUDES)
	264-7031	[1]	SEAL-CONNECTOR
15.	300-7909	[1]	BRACKET AS
	205-7047 M	[2]	INSERT-THREADED (M4X0.7-THD)
16.	114-6658	[2]	WASHER (6.5X17X1-MM THK)
17.	096-6166	[6]	WASHER-HARD (4.5X9X1-MM THK)
18.	117-8929	[1]	WASHER (6.6X22X2-MM THK)
19.	130-5300	[2]	CLIP
21.	3B-4610	[2]	PIN-COTTER
22.	3B-4504	[4]	LOCKWASHER
23.	5C-7261 M	[2]	NUT (M8X1.25-THD)
24.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
27.	6B-8193	[2]	PIN-CLEVIS
28.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
32.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
33.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
34.	116-6952 M	[6]	BOLT (M4X0.7X10-MM)
35.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
36.	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
38.	5P-7657 CD		SEAL (0.3-M)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP43020595

253-1967: WIRING GP-MONITOR

WIRING GP-MONITOR

253-1967 WIRING GP-MONITOR -CD610
S/N B9L1-UP
PART OF 292-7980 DISPLAY AR-MONITOR, 323-8140 GRADE CONTROL AR

i02636561 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	095-0817	[2]	LOCKWASHER
2.	167-8712	[1]	ALARM
3.	167-8713	[1]	BAFFLE AS
4.	167-8714	[1]	WIRE AS
5.	248-2284	[2]	KNOB-CONTROL
6.	251-0077	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	251-9571	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	295-8963	[1]	PLATE
9.	296-4922	[1]	HARNESS AS-MONITOR
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-6772	[2]	STRAP-CABLE
	126-1774	[1]	COVER-CONNECTOR
	147-1444	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
10.	130-5300	[3]	CLIP
11.	4L-7125	[4]	LOCKWASHER
12.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	5P-7657 D		SEAL (0.2-M)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP43020596

360-5872: WIRING GP-MONITOR

WIRING GP-MONITOR

360-5872 WIRING GP-MONITOR -ACCUGRADE
S/N B9L1-UP

i05065256 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	222-9151	[2]	WASHER-HARD (11X32X5-MM THK)
3.	245-8334	[2]	KNOB
4.	252-5190	[1]	HARNESS AS-FRONT CHASSIS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[8]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	248-5358	[1]	PLUG AS-CONNECTOR (39-PIN)
5.	273-5924	[1]	KNOB
6.	295-8369	[1]	PLATE
7.	295-8370	[1]	BRACKET AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
	9X-2032 M	[4]	NUT-WELD (M4X0.7-THD)
8.	295-8381	[1]	PLATE AS
9.	296-1067	[1]	HARNESS AS-WIRING (LIGHT BAR)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	230-5008	[3]	PLUG AS-CONNECTOR (4-PIN)
			(EACH INCLUDES)
	264-7031	[1]	SEAL-CONNECTOR
10.	300-7909	[1]	BRACKET AS
	205-7047 M	[2]	INSERT-THREADED (M4X0.7-THD)
11.	314-2820	[1]	HARNESS AS-RADIO
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[5]	PLUG-SEAL
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	167-8987	[1]	PLUG AS-CONNECTOR (8-PIN)
12.	357-2272	[1]	BRACKET AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
13.	114-6658	[2]	WASHER (6.5X17X1-MM THK)
14.	096-6166	[6]	WASHER-HARD (4.5X9X1-MM THK)
15.	116-6952 M	[6]	BOLT (M4X0.7X10-MM)
16.	117-8929	[1]	WASHER (6.6X22X2-MM THK)
17.	130-5300	[2]	CLIP
18.	344-5675 M	[2]	NUT (M10X1.5-THD)
19.	3B-4504	[4]	LOCKWASHER
20.	3B-4610	[2]	PIN-COTTER
21.	5P-6419	[1]	GROMMET
22.	6B-8193	[2]	PIN-CLEVIS
23.	6V-1820 M	[2]	BOLT (M10X1.5X30-MM)
24.	7X-7729	[4]	WASHER (11X25X3-MM THK)
25.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
26.	9X-1046 M	[6]	SCREW (M4X0.7X18-MM)
27.	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
28.	5P-7657 D	[3]	SEAL (0.3-M)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP43020597

233-4601: WIRING GP-REAR

WIRING GP-REAR

233-4601 WIRING GP-REAR -MAIN
S/N B9L1-400
PART OF 234-7718 COMMON AR

i02248257 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5008	[2]	SPACER (11X20X6-MM THK)
2.	139-2116	[1]	SWITCH GP-TOGGLE (ENGINE SHUTDOWN)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	166-0690	[2]	BLOCK AS-MOUNTING
4.	189-3158	[2]	SUPPRESSOR-ARC
5.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
6.	235-9778	[1]	HARNESS AS-REAR (HYDRAULIC PUMP)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7.	240-7193	[1]	RESISTOR AS (500-OHM, 2-WATT)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	251-3265	[2]	LINK AS
			(EACH INCLUDES)
	036-7232	[1]	ROD END
	8S-7048	[1]	ROD END
	9L-3334	[1]	NUT-PLATED (1/4-28-THD, LH)
	6F-0612	[1]	NUT-JAM (1/4-28-THD)
9.	258-8949	[4]	SPACER (7.5X12X56-MM THK)
10.	266-1467 Y	[2]	SENSOR GP-POSITION (ROTARY)(ARTICULATION)
11.	279-6798	[1]	HARNESS AS-REAR CHASSIS (AIR CONDITIONER)
	126-1774	[3]	COVER-CONNECTOR
	3S-2093	[4]	STRAP-CABLE
	9X-6772	[4]	STRAP-CABLE
	8N-1521	[2]	BELL AS-END
	102-8801	[3]	KIT-RECEPTACLE (12-PIN)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	8N-1518	[2]	PLUG AS-CONNECTOR (25-PIN)
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[9]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
12.	279-9658	[2]	LEVER
13.	288-5507	[1]	PLATE AS
14.	289-9520	[1]	BRACKET AS
	289-9519	[1]	BRACKET
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	291-2162	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
16.	292-0964	[1]	HARNESS AS-SWITCH (CHASSIS)
	110-8769	[1]	WIRE AS (16-GA)
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
17.	292-0970	[1]	HARNESS AS-PUMP (FUEL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18.	033-8248	[3]	CLIP (LOOP)
19.	130-5300	[12]	CLIP
20.	132-5789	[6]	CLIP (LADDER)
21.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
22.	134-3355	[1]	STRAP AS
23.	134-3987	[2]	CLIP (LOOP)
24.	144-8344	[1]	SPACER (11X19X20-MM THK)
25.	1S-0994	[1]	CLIP (LOOP)
26.	264-0460 M	[1]	STUD (M10X1.5X50-MM)
27.	2F-7888	[4]	SCREW-MACHINE (10-32X1.25-IN)
28.	2V-3216	[1]	CLIP (LOOP)
29.	3B-4619	[2]	PIN-COTTER
30.	3E-5169	[1]	GUARD-SWITCH
31.	3E-5239	[1]	RELAY AS (24-VOLT)(BACKUP ALARM)
31A.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PUMP)
31B.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
31C.	3E-5239	[1]	RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)
32.	3J-1907	[1]	SEAL-O-RING
33.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
34.	4D-7794	[1]	CLIP
35.	4D-9517	[2]	CLIP (SLOT)
36.	4P-8134	[1]	CLIP (LADDER)
37.	5C-7261 M	[1]	NUT (M8X1.25-THD)
38.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
39.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
40.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
41.	5P-9085	[3]	CLIP (LOOP)
42.	5P-9297	[5]	CLIP (LOOP)
43.	6D-3479	[2]	CLIP (LOOP)
44.	6D-4244	[2]	CLIP (LOOP)
45.	6V-0894	[2]	SEAL-O-RING
46.	6V-3265	[2]	CLIP
47.	7C-4355	[1]	CLIP
48.	7D-7233	[5]	CLIP (LOOP)
49.	7K-1181	[19]	STRAP-CABLE
50.	8F-6302	[4]	BOLT (1/4-20X3.75-IN)
51.	8M-2770	[3]	CLIP (LOOP)
52.	8M-2773	[4]	CLIP (LOOP)
53.	8T-4121	[37]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4133 M	[3]	NUT (M10X1.5-THD)
55.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[25]	BOLT (M10X1.5X20-MM)
57.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
58.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
59.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
60.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
61.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
63.	9M-4972	[4]	CLIP (LOOP)
64.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP43020598

233-4601: WIRING GP-REAR

WIRING GP-REAR

233-4601 WIRING GP-REAR -MAIN
S/N B9L401-416
PART OF 234-7718 COMMON AR

i03539722 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5008	[2]	SPACER (11X20X6-MM THK)
2.	139-2116	[1]	SWITCH GP-TOGGLE (ENGINE SHUTDOWN)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	166-0690	[2]	BLOCK AS-MOUNTING
4.	189-3158	[2]	SUPPRESSOR-ARC
5.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
6.	235-9778	[1]	HARNESS AS-REAR (HYDRAULIC PUMP)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7.	240-7193	[1]	RESISTOR AS (500-OHM, 2-WATT)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	251-3265	[2]	LINK AS
			(EACH INCLUDES)
	036-7232	[1]	ROD END
	8S-7048	[1]	ROD END
	9L-3334	[1]	NUT-PLATED (1/4-28-THD, LH)
	6F-0612	[1]	NUT-JAM (1/4-28-THD)
9.	258-8949	[4]	SPACER (7.5X12X56-MM THK)
10.	266-1467 Y	[2]	SENSOR GP-POSITION (ROTARY)(ARTICULATION)
11.	323-5958 C	[1]	HARNESS AS-REAR CHASSIS (AIR CONDITIONER)
12.	279-9658	[2]	LEVER
13.	288-5507	[1]	PLATE AS
14.	289-9520	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	291-2162	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
16.	292-0964	[1]	HARNESS AS-SWITCH (CHASSIS)
	110-8769	[1]	WIRE AS (16-GA)
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT-CONNECTING PLUG INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
17.	292-0970	[1]	HARNESS AS-PUMP (FUEL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT-CONNECTING PLUG INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
18.	033-8248	[3]	CLIP (LOOP)
19.	130-5300	[12]	CLIP
20.	132-5789	[6]	CLIP (LADDER)
21.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
22.	134-3355	[1]	STRAP AS
23.	134-3987	[2]	CLIP (LOOP)
24.	144-8344	[1]	SPACER (11X19X20-MM THK)
25.	1S-0994	[1]	CLIP (LOOP)
26.	264-0460 M	[1]	STUD (M10X1.5X50-MM)
27.	2F-7888	[4]	SCREW-MACHINE (10-32X1.25-IN)
28.	2V-3216	[1]	CLIP (LOOP)
29.	3B-4619	[2]	PIN-COTTER
30.	3E-5169	[1]	GUARD-SWITCH
31.	3E-5239	[1]	RELAY AS (24-VOLT)(BACKUP ALARM)
31A.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PUMP)
31B.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
31C.	3E-5239	[1]	RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)
32.	3J-1907	[1]	SEAL-O-RING
33.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
34.	4D-7794	[1]	CLIP
35.	4D-9517	[2]	CLIP (SLOT)
36.	4P-8134	[1]	CLIP (LADDER)
37.	5C-7261 M	[1]	NUT (M8X1.25-THD)
38.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
39.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
40.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
41.	5P-9085	[3]	CLIP (LOOP)
42.	5P-9297	[5]	CLIP (LOOP)
43.	6D-3479	[2]	CLIP (LOOP)
44.	6D-4244	[2]	CLIP (LOOP)
45.	6V-0894	[2]	SEAL-O-RING
46.	6V-3265	[2]	CLIP
47.	7C-4355	[1]	CLIP
48.	7D-7233	[5]	CLIP (LOOP)
49.	7K-1181 C	[21]	STRAP-CABLE
50.	8F-6302	[4]	BOLT (1/4-20X3.75-IN)
51.	8M-2770	[3]	CLIP (LOOP)
52.	8M-2773	[4]	CLIP (LOOP)
53.	8T-4121	[37]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4133 M	[3]	NUT (M10X1.5-THD)
55.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[25]	BOLT (M10X1.5X20-MM)
57.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
58.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
59.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
60.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
61.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
63.	9M-4972	[4]	CLIP (LOOP)
64.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP43020599

233-4601: WIRING GP-REAR

WIRING GP-REAR

233-4601 WIRING GP-REAR -MAIN
S/N B9L417-485
PART OF 234-7718 COMMON AR

i03539750 SEBP4302

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5008	[2]	SPACER (11X20X6-MM THK)
2.	139-2116	[1]	SWITCH GP-TOGGLE (ENGINE SHUTDOWN)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	166-0690	[2]	BLOCK AS-MOUNTING
4.	189-3158	[2]	SUPPRESSOR-ARC
5.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
6.	235-9778	[1]	HARNESS AS-REAR (HYDRAULIC PUMP)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7.	240-7193	[1]	RESISTOR AS (500-OHM, 2-WATT)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	251-3265	[2]	LINK AS
			(EACH INCLUDES)
	036-7232	[1]	ROD END
	8S-7048	[1]	ROD END
	9L-3334	[1]	NUT-PLATED (1/4-28-THD, LH)
	6F-0612	[1]	NUT-JAM (1/4-28-THD)
9.	258-8949	[4]	SPACER (7.5X12X56-MM THK)
10.	266-1467 Y	[2]	SENSOR GP-POSITION (ROTARY)(ARTICULATION)
11.	334-0585 C	[1]	HARNESS AS-CHASSIS (AIR CONDITIONER)
12.	279-9658	[2]	LEVER
13.	288-5507	[1]	PLATE AS
14.	289-9520	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	291-2162	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
16.	292-0964	[1]	HARNESS AS-SWITCH (CHASSIS)
	110-8769	[1]	WIRE AS (16-GA)
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT-CONNECTING PLUG INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
17.	292-0970	[1]	HARNESS AS-PUMP (FUEL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT-CONNECTING PLUG INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
18.	033-8248 C	[1]	CLIP (LOOP)
19.	130-5300 C	[11]	CLIP
20.	132-5789	[6]	CLIP (LADDER)
21.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
22.	134-3355	[1]	STRAP AS
23.	134-3987	[2]	CLIP (LOOP)
24.	144-8344	[1]	SPACER (11X19X20-MM THK)
25.	1S-0994	[1]	CLIP (LOOP)
26.	264-0460 M	[1]	STUD (M10X1.5X50-MM)
27.	2F-7888	[4]	SCREW-MACHINE (10-32X1.25-IN)
28.	2V-3216	[1]	CLIP (LOOP)
29.	3B-4619	[2]	PIN-COTTER
30.	3E-5169	[1]	GUARD-SWITCH
31.	3E-5239	[1]	RELAY AS (24-VOLT)(BACKUP ALARM)
31A.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PUMP)
31B.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
31C.	3E-5239	[1]	RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)
32.	3J-1907	[1]	SEAL-O-RING
33.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
34.	4D-7794	[1]	CLIP
35.	4D-9517	[2]	CLIP (SLOT)
36.	4P-8134 C	[2]	CLIP (LADDER)
37.	5C-7261 M	[1]	NUT (M8X1.25-THD)
38.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
39.	5P-0537	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
40.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
41.	5P-9085	[3]	CLIP (LOOP)
42.	5P-9297	[5]	CLIP (LOOP)
43.	6D-3479	[2]	CLIP (LOOP)
44.	6D-4244	[2]	CLIP (LOOP)
45.	6V-0894	[2]	SEAL-O-RING
46.	6V-3265	[2]	CLIP
47.	7C-4355	[1]	CLIP
48.	7D-7233	[5]	CLIP (LOOP)
49.	7K-1181 C	[25]	STRAP-CABLE
50.	8F-6302	[4]	BOLT (1/4-20X3.75-IN)
51.	8M-2770	[3]	CLIP (LOOP)
52.	8M-2773 C	[1]	CLIP (LOOP)
53.	8T-4121	[37]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4133 CM	[4]	NUT (M10X1.5-THD)
55.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[25]	BOLT (M10X1.5X20-MM)
57.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
58.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
59.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
60.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
61.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
62.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
63.	9M-4972	[4]	CLIP (LOOP)
64.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
65.	4P-7581 C	[1]	CLIP (LADDER)
66.	6D-4246 C	[3]	CLIP (LOOP)
67.	9M-8406 C	[1]	CLIP (LOOP)
68.	335-4218 C	[1]	HARNESS AS-SENSOR (BRAKE ACCUMULATOR)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Fuses - Replace
160M Motor Grader

Circuit Breakers - Reset
160M Motor Grader

Battery Disconnect Switch
160M Motor Grader

Engine Shutdown Switch - Check
160M Motor Grader

Battery or Battery Cable - Inspect/Replace
160M Motor Grader

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}

A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}
Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}
Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}

Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}

Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}

Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}

Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}
Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}

Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Technical Information Bulletin

Procedure to Check for Connector Seals{1408, 7553}
Procedure to Check for Connector Seals{1408, 7553}

Wiring Issue of the Control Valve Group for the Front Lift{1408, 5051}
Wiring Issue of the Control Valve Group for the Front Lift{1408, 5051}

Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}

Specifications

Magnetic Switch (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Solenoid Valve (Hydraulic Fan)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System

Pressure Sensor (Brake Oil Accumulator) - Use with the <B>251-8256</B> Control Manifold Gp
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System

Temperature Sensor (Transmission Oil)
120M, 12M, 140M and 160M Motor Graders Power Train

Temperature Sensor (Hydraulic Oil)
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Temperature Sensor (Hydraulic Oil)
120M, 140M and 160M Motor Graders All Wheel Drive

Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train

Pressure Sensor (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Pressure Switch (AWD Oil Filter Bypass) - Charge
120M, 140M and 160M Motor Graders All Wheel Drive

Toggle Switch (Ground Level Shutdown)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train

Ball Switch (Centershift Indicator)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Speed Sensor (Piston Motor)
120M, 140M and 160M Motor Graders All Wheel Drive

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Pressure Sensor (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Pressure Sensor (Brake Oil Accumulator)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

System Schematic
Machine Security System

Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Magnetic Switch (Secondary Steering Relay) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electrical Connector - Inspect
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Wiring Harness (Open Circuit) - Test
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Wiring Harness (Short Circuit) - Test
AccuGrade® GPS v11 for CD700

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Electrical Connector - Inspect
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Electrical Connector - Inspect
AccuGrade^® (CD610)

Wiring Harness (Open Circuit) - Test
AccuGrade^® (CD610)

Wiring Harness (Short Circuit) - Test
AccuGrade^® (CD610)

Connector Contact Description
AccuGrade^® (CD610)

Connector Contact Description
AccuGrade® GPS v11 for CD700

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

System Schematic
MSS3s Machine Security System

Connector Contact Description
Cat^® Grade Control Cross Slope System for Motor Graders

Troubleshooting

Electrical Component and Connector Locations
Machine Security System

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Switch Circuits
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 082 - CID 0490 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0490 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 0368 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0368 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Wiring Information
C9 Engines for Motor Graders

Electrical Connectors - Inspect
C9 Engines for Motor Graders

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electrical Power Supply
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 114 - CID 1396 - FMI 03
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

MID 114 - CID 1396 - FMI 05
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

MID 114 - CID 1396 - FMI 06
AccuGrade® GPS v11 for CD700

MID 027 - CID 2304 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Connector Locations
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Indicator Lamp Does Not Illuminate During the Power Up Self Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Indicator Lamp Is On Continuously
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Switch Circuits
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Electrical Connectors
C9 Engines for Motor Graders

Connector Locations
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 075 - CID 0517 - FMI 03
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

MID 075 - CID 0517 - FMI 04
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

CAN Data Link
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

MID 145 - CID 0650 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 145 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

MID 027 - CID 2976 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Wiring Harness (Short Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Disassembly and Assembly

Battery - Remove and Install
160M Motor Grader Engine Supplement

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

A new Cab Wiring Group Updates the Cab Arrangement {1408, 7301, 7332}
2008/10/13

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2013/07/08

A New Circuit Breaker and a Cover are Available for the High Intensity Discharge Lights on Certain Motor Graders {1420, 1434}
2009/12/21

New Wiring Harnesses Are Now Used on Certain M-Series Motor Graders {1408}
2010/02/10

A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
2009/12/24

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

New Steering Cylinder Sensor Harnesses are now Available for Certain M Series Motor Graders {1408}
2011/05/09

Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26

Improvements Have Been Made to the Steering Position Sensing System on Certain M Series Motor Graders {1408, 430S, 7620}
2012/01/11

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

New Joystick Kit Is Now Available as a Service Replacement for Push Button Faceplate on Certain M Series and M Series 2 Motor Graders {1408, 3168, 4343, 5063, 5705}
2013/06/13

A New Flasher Assembly for the Turn Signal Is Now Available for Certain M and M Series 2 Motor Graders {1408}
2014/03/31

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}
New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}

A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}

Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

The Mounting of the Temperature Sensor for the Steering Temperature Oil Has Been Improved on Certain M and M Series 2 Motor Graders {1408}
The Mounting of the Temperature Sensor for the Steering Temperature Oil Has Been Improved on Certain M and M Series 2 Motor Graders {1408}

A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}

New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}
New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}

Caterpillar Parts SIS Catalog 160M :

269-3410 WIRING GP-HEATER

259-3131 WIRING GP-HEATER

236-6237 WIRING GP-HEATER

356-3647 WIRING GP-GRADE CONTROL

239-6383 WIRING GP-GRADE CONTROL

233-3288 WIRING GP-GRADE CONTROL

291-2909 WIRING GP-LIGHTING

292-1874 WIRING GP-LIGHTING

253-1964 WIRING GP-MONITOR

253-1967 WIRING GP-MONITOR

360-5872 WIRING GP-MONITOR

233-4601 WIRING GP-REAR

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.