AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

247-8303 CLUTCH GP-TRANSMISSION -HIGH, LOW S/N CZM1-UP PART OF 253-8405 TRANSMISSION AR 160M MOTOR GRADER


POWER TRAIN
TRANSMISSION GP
CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD
COOLER GP
COUPLING GP
TRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL

MOTOR GRADER 160M MOTOR GRADER B9L
 160M Motor Grader B9L00001-UP (MACHINE) POWERED BY C9 Engine SEBP4302 160M B9L   (2005)

POWER TRAIN

TRANSMISSION GP
CLUTCH GP-TRANSMISSION
235-2413 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
235-2414 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
247-8303 CLUTCH GP-TRANSMISSION
COVER GP-SHIPPING
263-7434 COVER GP-SHIPPING
SHAFT GP-INPUT
305-2148 SHAFT GP-INPUT
253-8405 TRANSMISSION AR
 

#SEBP43020640
 

247-8303: CLUTCH GP-TRANSMISSION

247-8303 CLUTCH GP-TRANSMISSION -HIGH, LOW
S/N CZM1-UP
PART OF 253-8405 TRANSMISSION AR
i02235509 SEBP4302
2478303 CLUTCH GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-3919 [1] BEARING-ROLLER  
2. 3B-8921 [1] BEARING-INNER  
3. 3P-0337 [8] PLATE-CLUTCH  
4. 6I-8912 [6] DISC-FRICTION  
5. 6I-9502 [5] PLATE-CLUTCH  
6. 6Y-1114 [2] LOCKWASHER  
7. 6Y-1115 [4] RING-HALF  
8. 509-4135 [1] PISTON  
9. 6Y-1890 [1] RING-RETAINING  
10. 6Y-2312 [1] HUB AS  
11. 6Y-2425 [1] CARRIER-SEAL  
12. 509-4138 [1] PISTON  
13. 509-4139 [1] PISTON-BALANCE  
14. 6Y-7981 [7] DISC-FRICTION  
15. 7G-4822 [3] RING-SEAL  
16. 7T-4897 [1] DISC-THRUST  
17. 260-7596 [1] ROTOR  
18. 8E-1911 [1] GEAR AS (82-TEETH)  
  9W-6467 [2] BUSHING  
19. 8E-5734 [1] RING-SEAL EXTENSION  
20. 8E-5736 [2] RING-SEAL EXTENSION  
21. 8E-5742 [2] RING-SEAL (INTERNAL)  
22. 8E-8319 [4] DISC-THRUST  
23. 8F-3469 [3] SEAL-O-RING  
24. 8M-4295 [15] SPRING  
25. 9W-9905 [4] RING-LOCK  
26. 102-5881 [1] SPRING-WAVE  
27. 132-9637 [1] GEAR AS (43-TEETH)  
  9W-6467 [2] BUSHING  
28. 218-3339 [1] HUB AS  
29. 247-9930 [1] SHAFT AS  
  1P-0604 [1] PLUG-CUP  
30. 5H-8985 [1] PIN-SPRING  
31. 6V-1819 M [2] BOLT (M10X1.5X100-MM)  
  M   METRIC PART
 

#SEBP43020641
 

231-1511: CONTROL GP-DIFFERENTIAL LOCK

231-1511 CONTROL GP-DIFFERENTIAL LOCK
S/N B9L1-UP
PART OF 234-7718, 349-2553 COMMON AR
i02235535 SEBP4302
2311511 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 148-8423 [1] TEE AS  
  8T-3311 [1] TEE  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
3. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  3J-1907 [1] SEAL-O-RING  
4. 215-2693 I [1] HOSE AS  
5. 276-2171 [1] PLATE AS  
6. 290-3421 [1] TUBE AS  
7. 290-3422 [1] TUBE AS  
8. 148-8325 [1] CONNECTOR AS  
  6V-8641 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
9. 148-8368 [1] ELBOW AS  
  6V-8627 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
10. 148-8374 [1] ELBOW AS  
  6V-8723 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
11. 148-8378 [1] ELBOW AS  
  6V-8724 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
12. 250-2139 Y [1] VALVE & MTG GP-SOLENOID (DIFFERENTIAL LOCK)  
13. 6D-3479 [1] CLIP (LOOP)  
14. 7D-7233 [1] CLIP (LOOP)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [1] NUT (M10X1.5-THD)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020642
 

356-2977: CONTROL GP-DIFFERENTIAL LOCK

356-2977 CONTROL GP-DIFFERENTIAL LOCK
S/N B9L497-UP
PART OF 349-5186 POWER TRAIN AR
i03950292 SEBP4302
3562977 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8443 [1] TEE AS  
  7X-2459 [1] ADAPTER-TEE  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
2. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
3. 276-9459 [1] TUBE AS  
4. 280-7066 [1] TUBE AS  
5. 313-6460 [1] PLATE AS  
6. 148-8318 [1] CONNECTOR AS  
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
7. 148-8368 [1] ELBOW AS  
  6V-8627 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
8. 148-8378 [1] ELBOW AS  
  6V-8724 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
9. 250-2139 Y [1] VALVE & MTG GP-SOLENOID (DIFFERENTIAL LOCK)  
10. 6V-0852 [1] CAP-DUST  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020643
 

253-8425: CONTROL GP-TRANSMISSION HYD

253-8425 CONTROL GP-TRANSMISSION HYD
S/N CZM1-UP
PART OF 253-8405 TRANSMISSION AR
i02655011 SEBP4302
2538425 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-1692 [1] SEAL-O-RING  
2. 3K-0360 [1] SEAL-O-RING  
3. 3S-2093 [23] STRAP-CABLE  
4. 6V-0852 [8] CAP-DUST  
5. 165-4931 [4] ELBOW AS  
    (EACH INCLUDES)
  6V-8077 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
6. 6D-7889 [8] SEAL-O-RING  
7. 148-1925 [2] VALVE-RELIEF  
8. 155-5114 [3] SPACER-SPECIAL  
9. 191-8303 Y [2] SENSOR GP-SPEED (LOW OUTPUT)(TRANSMISSION OUTPUT)  
10. 191-8304 [1] SENSOR GP-SPEED (TRANSMISSION INPUT)  
10A. 191-8304 [1] SENSOR GP-SPEED (TRANSMISSION INTERMEDIATE 1)  
10B. 191-8304 [1] SENSOR GP-SPEED (TRANSMISSION INTERMEDIATE 2)  
11. 356-0841 [1] SWITCH AS-PRESSURE (PARKING BRAKE)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
12. 235-3530 Y [1] VALVE GP-RELIEF (TRANSMISSION)  
13. 238-0112 [1] SENSOR GP-TEMPERATURE (TRANSMISSION OIL)  
14. 244-3114 Y [8] VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)  
15. 247-4993 [1] SPACER  
16. 350-1107 [1] VALVE GP-SOLENOID (TRANSMISSION CONTROL)  
  245-1181 [1] FLANGE  
  245-1912 [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES SEAL-O-RINGS)
17. 253-5306 [1] HARNESS AS-SENSOR  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [12] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [12] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  144-1636 [12] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 B TAPE-ELECTRICAL  
18. 253-5323 [1] HARNESS AS-TRANSMISSION  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  9X-3402 [23] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [23] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  144-1636 [16] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 B TAPE-ELECTRICAL  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
19. 304-5687 [1] CONTROL GP-UNPROGRAMMED (TRANSMISSION)  
20. 288-5507 [1] PLATE AS  
21. 117-1385 [5] SEAL-O-RING  
22. 130-5300 [4] CLIP  
23. 132-5789 [7] CLIP (LADDER)  
25. 4P-7429 [2] CLIP (LADDER)  
26. 4P-7581 [11] CLIP (LADDER)  
27. 4P-7582 [1] CLIP (LADDER)  
28. 5P-8347 M [2] BOLT (M8X1.25X70-MM)  
29. 6V-5215 M [6] BOLT (M8X1.25X16-MM)  
30. 6V-5222 M [3] BOLT (M8X1.25X85-MM)  
31. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
32. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
33. 6V-9028 [1] SEAL-O-RING  
34. 8C-3428 [1] RING-RETAINING  
35. 8C-5748 M [1] BOLT (M8X1.25X55-MM)  
36. 8T-0100 M [20] BOLT (M8X1.25X60-MM)  
37. 8T-1158 M [1] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
38. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
39. 8T-9655 [8] MOUNT-ISOLATION  
40. 9M-1974 [28] WASHER-HARD (8.8X16X2-MM THK)  
41. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
42. 9X-4609 [2] SEAL-O-RING  
43. 4K-8864 [1] CLIP (LOOP)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020644
 

250-6726: COOLER GP-TRANSMISSION OIL

250-6726 COOLER GP-TRANSMISSION OIL
S/N TXD3044-UP; THX1-UP
PART OF 225-5619, 278-9731, 349-3561, 387-8570, 387-8573, 387-8578 ENGINE AR-COMPLETE
i02243134 SEBP4302
2506726 COOLER GP-TRANSMISSION OIL Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-8570 [1] BONNET  
2. 175-7453 [1] CORE AS-TRANSMISSION COOLER  
3. 180-3907 [1] SEAL-INTEGRAL  
4. 198-3462 [1] DIVERTER  
5. 242-1792 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
  139-4255 [2] SPACER (10X20X7-MM THK)  
6. 244-5692 [1] BONNET-COOLER  
7. 129-2861 [2] GASKET  
8. 398-5599 [1] PLUG AS  
  6V-3250 [1] SEAL-O-RING  
  360-3692 [1] PLUG  
9. 5P-8347 M [2] BOLT (M8X1.25X70-MM)  
10. 6V-1819 M [3] BOLT (M10X1.5X100-MM)  
11. 6V-2317 M [6] BOLT (M8X1.25X30-MM)  
12. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
13. 6V-4248 M [2] BOLT (M10X1.5X25-MM)  
16. 7X-2545 M [2] BOLT (M10X1.5X150-MM)  
17. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
18. 8T-6854 M [1] BOLT (M10X1.5X200-MM)  
19. 398-5614 [2] PLUG AS  
    (EACH INCLUDES)
19A. 6V-5064 [1] SEAL-O-RING  
  360-3684 [1] PLUG  
20. 398-5598 [1] PLUG AS  
20A. 6V-9027 [1] SEAL-O-RING  
  360-3677 [1] PLUG (7/16-20-THD)  
21. 0S-0509 [8] BOLT (3/8-16X0.75-IN)  
22. 1S-2176 [2] COVER  
23. 9M-6974 [2] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43020645
 

8E-3366: COUPLING GP-TORSIONAL

8E-3366 COUPLING GP-TORSIONAL
S/N B9L1-506
PART OF 234-7718, 349-2553 COMMON AR
i00122446 SEBP4302
8E3366 COUPLING GP-TORSIONAL Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 422-2480 [1] COUPLING AS  
2. 165-3928 [12] BOLT (3/8-16-THD)  
3. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP43020646
 

263-7434: COVER GP-SHIPPING

263-7434 COVER GP-SHIPPING -TRANSMISSION
S/N CZM1-UP
PART OF 253-8405 TRANSMISSION AR
i02235517 SEBP4302
2637434 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
2. 7J-3554 [1] COVER  
3. 8T-8737 [30] PLUG-SEAL  
4. 9H-0846 [1] SEAL-O-RING  
5. 117-2927 [1] COVER-SHIPPING  
6. 126-1773 [2] CAP-CONNECTOR  
7. 5N-4454 [1] BOOT  
9. 175-3721 [1] COVER  
10. 179-1539 [1] GASKET  
13. 148-8406 [2] PLUG AS  
    (EACH INCLUDES)
  9S-9334 [1] PLUG (1-5/16-12-THD)  
  7M-8485 [1] SEAL-O-RING  
14. 148-8407 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
15. [1] PLUG AS  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
16. 155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
17. 155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18. 179-1538 [1] COVER  
19. 2D-0094 [1] GASKET  
20. 4M-0189 [1] SEAL-O-RING  
21. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 6V-3823 M [10] BOLT (M12X1.75X60-MM)  
23. 6V-8149 M [10] NUT (M12X1.75-THD)  
24. 6V-9833 [1] CAP  
25. 8T-0293 M [4] BOLT (M12X1.75X20-MM)  
26. 371-7951 [1] CAP-PLUG  
27. 8E-5287 [1] STRAP  
28. 9M-2904 [1] CLAMP-HOSE  
  M   METRIC PART
 

#SEBP43020647
 

271-8594: DIFFERENTIAL & BEVEL GEAR GP

271-8594 DIFFERENTIAL & BEVEL GEAR GP
S/N B9L1-UP
PART OF 287-3526 AXLE GP-REAR
i02641233 SEBP4302
2718594 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-1677 [1] RACE-BEARING INNER  
2. 1J-2860 [1] CUP-BEARING  
3. 2D-9455 [1] CONE-BEARING  
4. 7S-4001 [1] SEAL-O-RING  
5. 201-7713 [1] BEARING AS  
6. 201-8481 [1] LOCKNUT AS  
  314-3260 [4] BOLT-LOCKING (M8X1.25X18-MM)  
7. 222-7843 [1] SHROUD  
8. 264-0575 [1] SEAL-LIP TYPE  
9. 271-8523 [1] YOKE AS  
  271-8680 [1] GUARD  
10. 271-8528 B [1] SHIM PACK (INCLUDES 18-SHIMS)  
11. 271-8529 [1] RETAINER  
12. 272-7116 [1] HOUSING-PINION  
13. 287-8223 Y [1] DIFFERENTIAL GP  
14. 293-0213 [1] SHAFT-BEVEL PINION  
15. 290-7296 M [20] BOLT (M16X2X40-MM)  
16. 309-8763 [1] GEAR-BEVEL (44-TEETH)  
17. 5A-3604 M [3] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
18. 1J-4757 [1] CONE-BEARING  
19. 2D-9454 [1] CUP-BEARING  
20. 8C-0622 [1] RING-RETAINING  
21. 286-9155 M [1] BOLT-SELF-LOCKING (M16X2X120-MM)  
22. 9X-8268 [20] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020648
 

287-8223: DIFFERENTIAL GP

287-8223 DIFFERENTIAL GP
S/N B9L1-UP
PART OF 271-8594 DIFFERENTIAL & BEVEL GEAR GP
i02641236 SEBP4302
2878223 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-9144 [3] SEAL-O-RING  
2. 148-7841 [3] SPRING  
3. 201-8476 [9] PLATE-SEPARATOR  
4. 201-8477 [9] DISC-FRICTION  
5. 201-8480 [1] PLATE-THRUST  
6. 221-8040 [3] DOWEL  
7. 239-3105 [1] RING-THRUST  
8. 287-8222 [1] CASE AS-DIFFERENTIAL  
8A. 8T-5002 M [8] BOLT (M16X2X180-MM)  
8B. 2S-0736 [8] WASHER-HARD (17X27X3.5-MM THK)  
9. 293-5368 [4] BUSHING  
10. 305-3353 [2] WASHER-THRUST  
11. 305-3352 [4] WASHER-THRUST  
12. 306-5622 [1] SPIDER  
13. 306-5628 [1] GEAR-DIFFERENTIAL BEVEL (44-TEETH)  
14. 306-5629 [1] GEAR-DIFFERENTIAL BEVEL (16-TEETH)  
15. 306-5635 [4] PINION-DIFFERENTIAL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP43020649
 

284-5015: DRIVE GP-FINAL

284-5015 DRIVE GP-FINAL -LH
S/N B9L1-UP
PART OF 287-3526 AXLE GP-REAR
i02641217 SEBP4302
2845015 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-8394 [2] CUP-BEARING  
2. 328-9669 [1] WASHER-THRUST (261.8X303X7-MM THK)  
3. 7D-8439 B [5] SHIM (0.007-IN THK)  
  7D-8441 B [5] SHIM (0.005-IN THK)  
  9D-7047 B [2] SHIM (0.02-MM THK)  
5. 8D-3902 [1] SEAL-LIP TYPE  
6. 9D-3075 [1] RETAINER  
8. 202-6473 M [34] BOLT (M16X2X60-MM)  
9. 512-2438 [2] SPROCKET  
10. 255-8575 [1] SHAFT-DRIVE  
11. 264-0194 [1] RETAINER  
12. 264-0196 B [1] SHIM PACK (INCLUDES 10-SHIMS)  
13. 266-0199 [2] RING-WEAR  
14. 272-8009 Y [1] CARRIER GP-FINAL DRIVE  
15. 279-2568 [1] GEAR-RING (84-TEETH)  
16. 329-0411 [1] SEAL-LIP TYPE  
17. 284-5018 [1] HOUSING  
18. 118-7313 M [12] BOLT (M16X2X70-MM)  
19. 291-6873 [1] HOUSING  
20. 6V-3303 M [3] BOLT (M16X2X60-MM)  
21. 198-4768 [16] WASHER-HARD (17.5X32X8-MM THK)  
22. 2B-9174 [1] BEARING AS-TAPERED ROLLER  
23. 4D-3704 [18] WASHER-HARD (17X30X5-MM THK)  
24. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 5P-9147 [1] SEAL-O-RING  
26. 6V-2449 [1] CONE-BEARING  
27. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
28. 8T-3727 [1] RING-RETAINING  
29. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
31. 547-6515 [1] WASHER-THRUST (261.8X309X7-MM THK)  
32. 5T-8224 [12] SPACER (17X32X12.7-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Transmission and Differential Oil Sample - Obtain
160M Motor Grader
Transmission and Differential Oil Level - Check
160M Motor Grader
Transmission and Differential Oil - Change
160M Motor Grader
Technical Information Bulletin
Checking 140M and 160M Transmission Oil Levels{3030, 3080, 3258}
Checking 140M and 160M Transmission Oil Levels{3030, 3080, 3258}
Certain M-Series Motor Graders Will Delay Shifts from Forward to Reverse{3000, 3030, 3063, 3155, 3170}
Certain M-Series Motor Graders Will Delay Shifts from Forward to Reverse{3000, 3030, 3063, 3155, 3170}
Failure of Pressure Sensor Gp in Certain M Series and M Series 2 Motor Graders{3080, 7620}
Failure of Pressure Sensor Gp in Certain M Series and M Series 2 Motor Graders{3080, 7620}
Specifications
Transmission
120M, 12M, 140M and 160M Motor Graders Power Train
Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train
Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train
Transmission Case
120M, 12M, 140M and 160M Motor Graders Power Train
Parking Brake
120M, 12M, 140M and 160M Motor Graders Power Train
Magnetic Screen (Transmission)
120M, 12M, 140M and 160M Motor Graders Power Train
Tool Operating Manual
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Transmission Power Flow
120M, 12M, 140M and 160M Motor Graders
Power Train Hydraulic System
120M, 12M, 140M and 160M Motor Graders
Color Chart
120M, 12M, 140M and 160M Motor Graders
Reuse And Salvage Guidelines
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Transmission Pressures - Test and Adjust
120M, 12M, 140M and 160M Motor Graders
Parking Brake - Test - Use This Test for All Older Versions of Transmission Control Software
120M, 12M, 140M and 160M Motor Graders
Parking Brake - Test - Use This Test for the <B>352-5716</B> Power Train Software Gp and All Newer Software
120M, 12M, 140M and 160M Motor Graders
Bench Test Procedures
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission - Remove
160M Motor Grader Power Train
Transmission - Disassemble
160M Motor Grader Power Train
Transmission - Assemble
160M Motor Grader Power Train
Transmission - Install
160M Motor Grader Power Train
Service Magazine
A New Process for Checking Seal Ring Carrier to Clutch Shaft Clearance {3063, 3155, 3170}
2007/11/19
Procedure for Cleaning the Power Train {3065, 3139}
2014/03/21
An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
2009/03/09
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}

Caterpillar Parts SIS Catalog 160M :

CLUTCH GP-TRANSMISSION
235-2414 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
235-2413 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
235-2412 CLUTCH GP-TRANSMISSION
CHAIN GP-DRIVE
233-6369 CHAIN GP-DRIVE
CASE GP-TRANSMISSION
253-8426 CASE GP-TRANSMISSION
CASE GP-TRANSMISSION
253-8426 CASE GP-TRANSMISSION
CASE GP-TRANSMISSION
253-8426 CASE GP-TRANSMISSION
CARRIER GP-FINAL DRIVE
272-8009 CARRIER GP-FINAL DRIVE
CONTROL GP-DIFFERENTIAL LOCK
231-1511 CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-DIFFERENTIAL LOCK
356-2977 CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD
253-8425 CONTROL GP-TRANSMISSION HYD
COOLER GP-TRANSMISSION OIL
250-6726 COOLER GP-TRANSMISSION OIL
COUPLING GP-TORSIONAL
8E-3366 COUPLING GP-TORSIONAL
COVER GP-SHIPPING
263-7434 COVER GP-SHIPPING
DIFFERENTIAL & BEVEL GEAR GP
271-8594 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
287-8223 DIFFERENTIAL GP

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.