AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

381-4305 AXLE GP-FRONT S/N B9L1-UP NON AWD PART OF 260-7451 AXLE AR-FRONT 160M MOTOR GRADER


FRAME AND BODY
AXLE GP
BRACKET GP
HITCH GP
COVER GP
ENCLOSURE GP

MOTOR GRADER 160M MOTOR GRADER B9L
 160M Motor Grader B9L00001-UP (MACHINE) POWERED BY C9 Engine SEBP4302 160M B9L   (2005)

FRAME AND BODY

AXLE GP
AXLE AR-FRONT
260-7451 AXLE AR-FRONT
AXLE AR-FRONT
260-7451 AXLE AR-FRONT
AXLE GP-FRONT
260-7453 AXLE GP-FRONT
AXLE GP-FRONT
260-7455 AXLE GP-FRONT
AXLE GP-FRONT
381-4305 AXLE GP-FRONT
AXLE GP-FRONT
381-4306 AXLE GP-FRONT
MOUNTING GP-AXLE
284-5025 MOUNTING GP-AXLE
MOUNTING GP-AXLE
290-3921 MOUNTING GP-AXLE
 

#SEBP43020870
 

381-4305: AXLE GP-FRONT

381-4305 AXLE GP-FRONT
S/N B9L1-UP
NON AWD
PART OF 260-7451 AXLE AR-FRONT
i04973074 SEBP4302
3814305 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-8615 [4] WASHER-THRUST (2.015X3.625X0.11-IN THK)  
2. 2G-8626 [2] WASHER-THRUST (2.02X3.63X0.16-IN THK)  
3. 2G-8741 [4] RING-METAL SEAL  
4. 2G-8777 [4] SEAL  
5. 3B-8486 [2] FITTING-GREASE (1/8-27 PTF)  
6. 3B-8489 [12] FITTING-GREASE (1/8-27 PTF)  
7. 5K-5288 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
7A. 5K-5129 [2] RING-SEALING  
8. 5T-0906 [2] COVER  
9. 7D-8636 [2] CONE-BEARING  
10. 7D-8637 [2] CUP-BEARING  
11. 7D-8643 [2] RETAINER  
12. 7K-9202 [4] SEAL-LIP TYPE  
13. 030-0060 [2] CUP-BEARING  
14. 030-0061 [2] CONE-BEARING  
15. 155-1142 [3] WASHER (17X71X5-MM THK)  
16. 248-6225 [2] SPINDLE  
17. 257-9799 [4] PIN  
18. 260-7486 [2] PIN  
19. 260-8602 [4] WASHER (11X53.8X3-MM THK)  
20. 260-8713 Y [1] CYLINDER & MTG GP-WHEEL LEAN  
21. 274-6816 Y [1] LINK GP-STEERING  
22. 279-4357 [1] BAR AS  
22A. 2G-8624 [2] BUSHING  
23. 279-5746 Y [1] CYLINDER & MTG GP-STEERING  
24. 297-2537 [2] LOCK  
25. 365-9252 [1] HOUSING-SPINDLE (LH)  
26. 365-9253 [1] HOUSING-SPINDLE (RH)  
27. 381-4306 Y [1] AXLE GP-FRONT  
28. 381-4308 [1] ARM AS (LH)  
28A. 146-1842 [1] BUSHING  
28B. 146-1843 [1] BUSHING  
28C. 279-4355 [1] PIN  
29. 381-4309 [1] ARM AS (RH)  
29A. 146-1842 [1] BUSHING  
29B. 146-1843 [1] BUSHING  
29C. 279-4356 [1] PIN  
30. 148-8395 [2] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
31. 198-4768 [3] WASHER-HARD (17.5X32X8-MM THK)  
32. 266-7315 [2] WASHER-HARD (22X65X6-MM THK)  
33. 2J-8163 [2] SEAL-O-RING  
34. 3B-4618 [2] PIN-COTTER  
35. 5M-6214 [4] PLUG (1/8-27 PTF)  
36. 5P-8890 [2] SEAL-LIP TYPE  
37. 6V-5696 M [6] BOLT (M12X1.75X80-MM)  
38. 6V-5844 M [3] BOLT (M16X2X35-MM)  
39. 6V-8133 M [2] BOLT (M24X3X80-MM)  
40. 7X-0851 M [2] NUT (M24X3-THD)  
41. 7X-2561 M [4] BOLT (M20X2.5X35-MM)  
42. 7X-7729 [4] WASHER (11X25X3-MM THK)  
43. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
44. 9M-2092 [4] SEAL-O-RING  
45. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
46. 2G-3865 B [6] SHIM (0.127-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020871
 

381-4306: AXLE GP-FRONT

381-4306 AXLE GP-FRONT
S/N B9L1-UP
PART OF 381-4305 AXLE GP-FRONT
i04973109 SEBP4302
3814306 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2D-8652 [2] BEARING  
2. 2G-8631 [4] BUSHING  
3. 433-7105 [4] SEAL-PIN  
4. 131-4428 [2] BUSHING  
5. 377-2508 [1] AXLE AS  
  8W-6469 [2] BRACKET  
  117-8721 [4] LUG (M10X1.5-THD)  
6. 5P-8843 [2] SEAL-LIP TYPE  
 

#SEBP43020872
 

248-1488: BRACKET GP-MOUNTING

248-1488 BRACKET GP-MOUNTING -SONIC SENSOR
S/N B9L1-UP
PART OF 286-0132, 286-0133 SENSOR GP-SONIC
i03070592 SEBP4302
2481488 BRACKET GP-MOUNTING Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4836 [1] PIN-COTTER  
2. 1B-2578 [2] NUT (3/8-16-THD)  
3. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 289-0488 [1] HANDLE AS  
5. 289-0487 [1] HANDLE AS  
 

#SEBP43020873
 

308-6276: CONVERSION GP-TOWING HITCH

308-6276 CONVERSION GP-TOWING HITCH
S/N B9L1-UP
i03901216 SEBP4302
3086276 CONVERSION GP-TOWING HITCH Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9530 [4] TACK (METAL)  
2. 167-0206 [1] PLATE  
3. 308-6274 [1] HITCH AS-TOWING  
  2C-8746 [1] PIN  
  3B-5325 [1] PIN-COTTER  
  7T-1099 [1] LINK  
  103-5796 [1] PIN-KEEPER  
 

#SEBP43020874
 

238-1916: COVER GP-CONTROL VALVE

238-1916 COVER GP-CONTROL VALVE
S/N B9L1-491
PART OF 234-7718 COMMON AR, 364-1988 OPTION AR-MACHINE
i02248630 SEBP4302
2381916 COVER GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-5763 [14] CLIP-SPRING  
2. 248-0322 [2] BRACKET AS  
3. 260-3226 [1] BRACKET AS  
4. 359-9488 [1] BRACKET AS  
  8T-3490 M [10] NUT-WELD (M10X1.5-THD)  
5. 290-2160 [1] BRACKET AS  
  8T-3490 M [10] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
6. 290-2219 [1] COVER AS  
7. 295-1544 [1] COVER (LH)  
8. 295-1545 [1] COVER (RH)  
9. 297-7129 [1] BRACKET AS  
10. 297-7130 [1] BRACKET AS  
11. 297-7131 [1] BRACKET AS  
12. 315-0058 [1] COVER AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
13. 336-8899 [1] PLATE  
14. 7X-0578 [10] WASHER-HARD (10.2X32X2.5-MM THK)  
15. 7X-0579 [14] WASHER-HARD (8.8X25.5X2-MM THK)  
16. 7X-7729 [47] WASHER (11X25X3-MM THK)  
17. 8T-0722 M [2] BOLT-LOCKING (M10X1.5X30-MM)  
18. 8T-4136 M [18] BOLT (M10X1.5X25-MM)  
19. 8T-4137 M [27] BOLT (M10X1.5X20-MM)  
20. 8T-4189 M [14] BOLT (M8X1.25X20-MM)  
21. 8T-4201 M [3] BOLT-LOCKING (M10X1.5X20-MM)  
22. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP43020875
 

290-3527: COVER GP-PROTECTION

290-3527 COVER GP-PROTECTION
S/N B9L1-506
PART OF 234-7718, 349-2553 COMMON AR
i02640795 SEBP4302
2903527 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 346-3630 [2] PLATE  
2. 296-2990 [4] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
3. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP43020876
 

312-5959: COVER GP-PROTECTION

312-5959 COVER GP-PROTECTION -ALL WHEEL DRIVE
S/N B9L1-UP
CANNOT BE USED WITH @@@@@312-5972@@@@@
i02872340 SEBP4302
3125959 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4318 [8] TURNBUCKLE  
2. 343-8139 [1] COVER AS  
3. 312-5961 [1] BRACKET  
4. 312-5962 [1] BRACKET  
5. 6K-3273 [16] RIVET-POP  
 

#SEBP43020877
 

312-5972: COVER GP-PROTECTION

312-5972 COVER GP-PROTECTION
S/N B9L1-UP
PART OF 349-3053 OPTION AR-COLD WEATHER
FOR USE WITH @@@@@312-5959@@@@@
i02872404 SEBP4302
3125972 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4318 [4] TURNBUCKLE  
2. 350-8820 [1] COVER AS  
3. 6K-3273 [8] RIVET-POP  
 

#SEBP43020878
 

288-8989: ENCLOSURE GP-ENGINE

288-8989 ENCLOSURE GP-ENGINE
S/N B9L1-481
PART OF 234-7718 COMMON AR
i02641241 SEBP4302
2888989 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-1387 [9] WASHER (10.26X22.22X1.9-MM THK)  
2. 227-3101 [2] STRIKER AS  
3. 227-3103 [2] PLATE  
4. 245-2806 [2] HANDHOLD  
5. 245-2807 [1] BRACKET AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
6. 245-2827 [2] HANDRAIL  
7. 267-5503 [2] HANDRAIL  
8. 283-9428 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
9. 283-9433 [1] FRAME AS  
  7T-1099 [7] LINK  
  8T-3490 M [11] NUT-WELD (M10X1.5-THD)  
  087-5841 [1] PLATE  
  130-5300 [1] CLIP  
  1V-8284 [2] HINGE  
10. 283-9484 [2] HINGE AS  
11. 284-0424 [1] PANEL AS (LH)  
  304-7620 [4] BUMPER  
12. 284-0438 [1] PANEL AS (RH)  
13. 284-0525 [1] PLATE AS  
  1V-8284 [2] HINGE  
  7T-1099 [4] LINK  
  8T-3490 M [11] NUT-WELD (M10X1.5-THD)  
  087-5841 [1] PLATE  
  130-5300 [1] CLIP  
14. 284-0565 [1] GUARD AS  
15. 284-7994 [1] PANEL AS  
16. 285-8940 [1] DASH AS  
17. 285-9034 [2] ROD AS  
18. 285-9036 [1] ROD AS  
19. 286-5626 [1] BRACKET AS  
20. 286-8292 [3] PLATE-STRIKER  
21. 288-8990 [1] FRAME AS (LH)  
  8T-3490 M [17] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [9] NUT-WELD (M8X1.25-THD)  
  9G-9155 [1] CLIP  
22. 288-9007 [1] FRAME AS (RH)  
  8T-3490 M [17] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
23. 288-9013 [1] DOOR AS (RH)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  [1] DOOR  
  304-7620 [4] BUMPER  
24. 288-9017 [1] DOOR AS (LH)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  304-7620 [4] BUMPER  
25. 316-0557 [1] BRACKET AS  
  8T-3490 M [13] NUT-WELD (M10X1.5-THD)  
26. 288-9591 Y [1] HOOD GP  
27. 289-8674 [1] PLATE AS  
28. 291-0911 [1] PANEL AS  
29. 291-0927 [1] PANEL AS  
30. 292-3091 [2] BAR  
31. 292-3092 [1] COVER AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
32. 294-2382 [3] LATCH AS  
33. 295-1578 [2] BRACKET AS  
34. 295-3839 [3] PAWL  
35. 198-4777 [10] WASHER-HARD (11X25X10-MM THK)  
36. 198-4778 [12] WASHER-HARD (13.5X30X12-MM THK)  
37. 198-4780 [8] WASHER-HARD (17.5X32X8-MM THK)  
38. 3B-4615 [9] PIN-COTTER  
39. 5C-7261 M [4] NUT (M8X1.25-THD)  
40. 5P-4116 [15] WASHER-HARD (8.8X20.5X2-MM THK)  
41. 5P-8439 [3] GROMMET  
42. 7X-2555 M [1] BOLT (M16X2X80-MM)  
43. 7X-7729 [123] WASHER (11X25X3-MM THK)  
44. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4133 M [18] NUT (M10X1.5-THD)  
46. 8T-4136 M [82] BOLT (M10X1.5X25-MM)  
47. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
48. 8T-4140 M [7] BOLT (M16X2X60-MM)  
49. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
50. 8T-4185 M [8] BOLT (M10X1.5X50-MM)  
51. 8T-4189 M [31] BOLT (M8X1.25X20-MM)  
52. 8T-4195 M [18] BOLT (M10X1.5X30-MM)  
53. 8T-4196 M [12] BOLT (M10X1.5X35-MM)  
54. 8T-4224 [37] WASHER-HARD (8.8X16X2-MM THK)  
55. 8T-4908 M [17] BOLT (M8X1.25X25-MM)  
56. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
57. 6V-5746 D TRIM (0.6-M)  
58. 308-7777 [2] PLATE  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020879
 

288-8989: ENCLOSURE GP-ENGINE

288-8989 ENCLOSURE GP-ENGINE
S/N B9L1-506
PART OF 234-7718, 349-2553 COMMON AR
i03891959 SEBP4302
2888989 ENCLOSURE GP-ENGINE Parts scheme 2888989 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-1387 [9] WASHER (10.26X22.22X1.9-MM THK)  
2. 227-3101 [2] STRIKER AS  
3. 227-3103 [2] PLATE  
4. 245-2806 [2] HANDHOLD  
5. 245-2827 [2] HANDRAIL  
6. 267-5503 [2] HANDRAIL  
7. 284-0565 [1] GUARD AS  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
8. 285-9034 [2] ROD AS  
9. 285-9036 [1] ROD AS  
10. 286-1605 C [3] PLATE  
11. 288-9013 [1] DOOR AS (RH)  
12. 288-9017 [1] DOOR AS (LH)  
13. 288-9591 Y [1] HOOD GP  
14. 292-3091 [2] BAR  
15. 292-3092 [1] COVER AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
16. 295-1578 [2] BRACKET AS  
17. 295-3839 [3] PAWL  
18. 308-7777 [2] PLATE  
19. 316-0557 [1] BRACKET AS  
20. 318-6433 C [1] PANEL AS-ENCLOSURE  
21. 321-1371 C [1] PANEL AS  
22. 321-1376 C [1] PANEL AS  
23. 321-1446 C [1] BRACKET AS  
24. 321-3884 C [2] HINGE AS  
25. 321-7238 C [1] PANEL  
26. 322-1172 C [1] PLATE AS  
27. 323-1776 C [1] BRACKET AS  
28. 323-1779 C [1] FRAME AS (LH)  
29. 323-1780 C [1] FRAME AS (RH)  
30. 323-2550 C [1] FRAME AS  
31. 323-2551 C [1] PLATE AS  
32. 326-0610 CJ [3] LATCH AS  
    (EACH INCLUDES)
  344-5673 M [4] NUT (M6X1-THD)  
  1H-3244 [4] LOCKWASHER  
  095-1207 M [2] NUT (M12X1.75-THD)  
  326-0612 [2] WASHER-TAB  
33. 348-0424 C [1] DOOR AS  
34. 349-5332 C [1] DASH AS  
35. 349-6273 [1] PLATE AS  
36. 198-4777 [10] WASHER-HARD (11X25X10-MM THK)  
37. 198-4778 C [4] WASHER-HARD (13.5X30X12-MM THK)  
38. 3B-4615 [9] PIN-COTTER  
39. 5C-7261 M [4] NUT (M8X1.25-THD)  
40. 5P-4116 [15] WASHER-HARD (8.8X20.5X2-MM THK)  
41. 5P-8439 [3] GROMMET  
42. 6P-6256 [2] RETAINER-SPRING  
43. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
44. 7X-7729 C [121] WASHER (11X25X3-MM THK)  
45. 8T-4133 M [18] NUT (M10X1.5-THD)  
46. 8T-4136 CM [76] BOLT (M10X1.5X25-MM)  
47. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
48. 8T-4189 CM [47] BOLT (M8X1.25X20-MM)  
49. 8T-4195 M [36] BOLT (M10X1.5X30-MM)  
50. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
51. 8T-4224 [47] WASHER-HARD (8.8X16X2-MM THK)  
52. 8T-4908 CM [11] BOLT (M8X1.25X25-MM)  
53. 6V-5746 D TRIM (0.6-M)  
54. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Kingpin Bearings - Lubricate
160M Motor Grader
Wheel Bearing Oil (Front) - Change - If Equipped
160M Motor Grader
Wheel Bearing Oil Level (Front) - Check - If Equipped
160M Motor Grader
Axle Oscillation Bearings - Lubricate
160M Motor Grader
Wheel Bearing Oil Sample (Front) - Obtain - If Equipped
160M Motor Grader
Wheel Lean Bearings - Lubricate
160M Motor Grader
Special Instruction
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Rework Procedure for the Spindle Housing for Certain M Series Motor Graders{4305, 4313, 5225}
Rework Procedure for the Spindle Housing for Certain M Series Motor Graders{4305, 4313, 5225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Technical Information Bulletin
Problems Reported with Wheel Lean Bar{4305, 4313, 5225}
Problems Reported with Wheel Lean Bar{4305, 4313, 5225}
All Motor Graders Are Now Shipped With Front Axle Wheel Lean Bar Pinned{3282, 4305, 4313, 5225}
All Motor Graders Are Now Shipped With Front Axle Wheel Lean Bar Pinned{3282, 4305, 4313, 5225}
Specifications
Front Axle
120M, 12M, 140M and 160M Motor Graders Machine Systems
Steering Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Front Axle (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Steering Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Steering Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Front Axle
120M, 12M, 140M and 160M Motor Graders Machine Systems
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Reuse And Salvage Guidelines
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Thermal Spray Procedures for Motor Grader Spindle (OD){0374, 0599, 0679, 4205, 4305, 4313, 5225}
Thermal Spray Procedures for Motor Grader Spindle (OD){0374, 0599, 0679, 4205, 4305, 4313, 5225}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SPINDLE HOUSING ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
Testing and Adjusting
Axle Toe-In (Front) - Adjust
120M, 12M, 140M and 160M Motor Graders Machine Systems
Disassembly and Assembly
Wheel Spindle - Remove - Front Wheel
160M Motor Grader Machine Systems
Wheel Spindle - Install
160M Motor Grader Machine Systems
Wheel Lean Bar - Remove and Install
160M Motor Grader Machine Systems
Wheel Lean Arm and Axle Bushings - Remove
160M Motor Grader Machine Systems
Wheel Lean Arm and Axle Bushings - Install
160M Motor Grader Machine Systems
Front Axle - Remove
160M Motor Grader Power Train
Front Axle - Install
160M Motor Grader Power Train
Wheel Spindle and Wheel Spindle Housing - Remove
160M Motor Grader Machine Systems
Wheel Spindle and Wheel Spindle Housing - Install
160M Motor Grader Machine Systems
Front Axle - Remove
160M Motor Grader Machine Systems
Front Axle - Install
160M Motor Grader Machine Systems
Service Magazine
The Toe-In Adjustment Procedure has been Updated {4313}
2008/09/29

Caterpillar Parts SIS Catalog 160M :

AXLE GP-FRONT
260-7455 AXLE GP-FRONT
AXLE GP-FRONT
260-7453 AXLE GP-FRONT
AXLE AR-FRONT
260-7451 AXLE AR-FRONT
AXLE AR-FRONT
260-7451 AXLE AR-FRONT
WHEEL GP
540-3756 WHEEL GP
540-3755 WHEEL GP
WHEEL GP
540-3237 WHEEL GP
540-3236 WHEEL GP
AXLE GP-FRONT
381-4306 AXLE GP-FRONT
BRACKET GP-MOUNTING
248-1488 BRACKET GP-MOUNTING
CONVERSION GP-TOWING HITCH
308-6276 CONVERSION GP-TOWING HITCH
COVER GP-CONTROL VALVE
238-1916 COVER GP-CONTROL VALVE
COVER GP-PROTECTION
290-3527 COVER GP-PROTECTION
COVER GP-PROTECTION
312-5959 COVER GP-PROTECTION
COVER GP-PROTECTION
312-5972 COVER GP-PROTECTION
ENCLOSURE GP-ENGINE
288-8989 ENCLOSURE GP-ENGINE

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.