AVSPARE.COM
parts catalog

260-8709 CYLINDER & MTG GP-STEERING S/N B9L1-UP PART OF 260-8698 AXLE GP-FRONT FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT 160M




HYDRAULIC SYSTEM

CYLINDER GP
 

#SEBP43021040
 

260-8709: CYLINDER & MTG GP-STEERING

260-8709 CYLINDER & MTG GP-STEERING
S/N B9L1-UP
PART OF 260-8698 AXLE GP-FRONT
FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT
i02249865 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-4904 [2] LOCKNUT (1-1/8-12-THD)  
2. 249-3505 [2] RACE-BEARING  
3. 257-2758 [2] PIN AS  
4. 258-9981 [2] SPACER (32.16X38.1X8.65-MM THK)  
5. 260-6117 [2] BALL STUD  
6. 262-5766 Y [2] CYLINDER GP-STEERING  
7. 285-0612 [2] CAP AS-DUST  
8. 441-8164 [2] SEAL-BOOT  
9. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
10. 3J-8500 [2] RING-RETAINING  
11. 4F-8824 [2] SEAL-O-RING  
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43021041
 

279-5746: CYLINDER & MTG GP-STEERING

279-5746 CYLINDER & MTG GP-STEERING
S/N B9L379-UP
PART OF 260-7453, 381-4305 AXLE GP-FRONT
i02661748 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-3505 [2] RACE-BEARING  
2. 255-8715 Y [2] CYLINDER GP-STEERING  
3. 257-2758 [2] PIN AS  
4. 258-9981 [2] SPACER (32.16X38.1X8.65-MM THK)  
5. 274-6808 [2] BALL STUD  
6. 285-0612 [2] CAP AS-DUST  
7. 314-2606 [2] SEAL-BOOT  
8. 2F-8057 [2] NUT-SLOTTED  
9. 3B-4618 [2] PIN-COTTER  
10. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
11. 3J-8500 [2] RING-RETAINING  
12. 4F-8824 [2] SEAL-O-RING  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP43021042
 

260-8713: CYLINDER & MTG GP-WHEEL LEAN

260-8713 CYLINDER & MTG GP-WHEEL LEAN
S/N B9L379-UP
PART OF 260-7453, 260-8698, 381-4305 AXLE GP-FRONT
i02189515 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-9726 [1] PIN  
2. 6G-7187 [1] LOCK  
3. 7K-9202 [4] SEAL-LIP TYPE  
4. 249-5299 Y [1] CYLINDER GP-WHEEL LEAN  
5. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
6. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6V-3668 M [2] BOLT (M12X1.75X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43021043
 

247-0096: CYLINDER GP-ARTICULATION

247-0096 CYLINDER GP-ARTICULATION
S/N B9L1-UP
82.6-MM(3.3-IN) BORE X 282.3-MM(11-IN) STROKE
PART OF 233-7721 CYLINDER & MTG GP-ARTICULATION
i02248376 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0123 [1] HEAD AS  
  227-1143 J [1] SEAL-WIPER  
2. 249-5300 [1] CYLINDER AS  
3. 249-5303 [1] PISTON  
4. 249-5304 [1] ROD AS  
5. 167-2192 J [1] SEAL AS-BUFFER  
6. 167-2302 J [1] SEAL-U-CUP  
7. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
8. 175-7897 J [1] SEAL-O-RING  
9. 227-1143 J [1] SEAL-WIPER  
10. 4T-6779 J [1] RING  
11. 6J-0793 J [1] SEAL AS  
  6J-0789 [1] RING-EXPANDER  
  6J-0790 [1] SEAL  
12. 6J-1381 J [1] RING-BACKUP  
13. 8J-6371 J [1] RING-WEAR  
14. 9X-8399 [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  246-5926 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP43021044
 

131-7191: CYLINDER GP-BLADE TIP

131-7191 CYLINDER GP-BLADE TIP
S/N B9L1-UP
69.85-MM (2.75-IN)BORE X 307.00-MM (12.09-IN) STROKE
PART OF 233-7723 CYLINDER & MTG GP-BLADE TIP
i00995297 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-7194 [1] CYLINDER AS  
  2D-8652 [1] BEARING  
2. 178-2991 M [1] BOLT-SELF-LOCKING (M20X2.5X70-MM)  
3. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 5J-7010 J [1] SEAL AS  
5. 8J-0112 J [1] RING-WEAR  
6. 9T-2457 [1] PISTON  
7. 175-7895 J [1] SEAL-O-RING  
8. 4J-9225 J [1] RING-BACKUP  
9. 6E-4940 [1] HEAD  
10. 131-7195 [1] ROD AS  
  2D-8652 [1] BEARING  
11. 4T-6780 J [1] RING-WEAR  
12. 167-2186 J [1] SEAL AS-BUFFER  
13. 167-2294 J [1] SEAL-U-CUP  
14. 226-8202 J [1] SEAL-WIPER  
   
    AVAILABLE REPAIR KIT(S):
  233-9204 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  472-8025 [1] KIT-HYDRAULIC CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43021045
 

262-1907: CYLINDER GP-CENTERSHIFT

262-1907 CYLINDER GP-CENTERSHIFT
S/N B9L1-UP
76.2-MM (3-IN) BORE X 630-MM (24.8-IN) STROKE
PART OF 263-2788 CYLINDER & MTG GP-CENTERSHIFT
i02248720 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1131 [1] PISTON  
2. 148-2593 [1] HEAD  
3. 262-1920 [1] ROD AS  
4. 262-1926 [1] CYLINDER AS  
5. 289-2935 J [1] SEAL AS-BUFFER  
6. 289-2946 J [1] SEAL-U-CUP  
7. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
8. 175-7896 J [1] SEAL-O-RING  
9. 308-1845 J [1] SEAL-WIPER  
10. 3S-7023 [1] WASHER (34X57X6-MM THK)  
11. 4T-5613 J [1] RING-WEAR  
12. 6J-1972 J [1] SEAL AS  
13. 6J-5731 J [1] RING-BACKUP  
14. 6J-5733 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  238-4462 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43021046
 

262-1900: CYLINDER GP-LIFT

262-1900 CYLINDER GP-LIFT -BLADE
S/N B9L1-UP
76.2-MM (3-IN) BORE X 1245-MM (49-IN) STROKE
PART OF 263-2787 CYLINDER & MTG GP-BLADE LIFT
i02248704 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1131 [1] PISTON  
2. 132-4928 [1] CYLINDER AS  
  8J-6384 [2] BUSHING  
3. 148-2593 [1] HEAD  
4. 262-1919 [1] ROD AS  
5. 289-2935 J [1] SEAL AS-BUFFER  
6. 289-2946 J [1] SEAL-U-CUP  
7. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
8. 175-7896 J [1] SEAL-O-RING  
9. 308-1845 J [1] SEAL-WIPER  
10. 3S-7023 [1] WASHER (34X57X6-MM THK)  
11. 4T-5613 J [1] RING-WEAR  
12. 6J-1972 J [1] SEAL AS  
13. 6J-5731 J [1] RING-BACKUP  
14. 6J-5733 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  238-4462 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43021047
 

335-1974: CYLINDER GP-LIFT

335-1974 CYLINDER GP-LIFT -BLADE
S/N B9L1-UP
76.2-MM (3-IN)BORE X 1257-MM (49.5)STROKE
PART OF 305-2897 CYLINDER & MTG GP-BLADE LIFT
i03942909 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1131 [1] PISTON  
2. 148-2593 [1] HEAD  
3. 262-1919 [1] ROD AS  
4. 289-2935 [1] SEAL AS-BUFFER  
5. 336-6681 [1] CYLINDER AS  
5A. 8J-6384 [2] BUSHING  
6. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
7. 175-7896 J [1] SEAL-O-RING  
8. 289-2946 J [1] SEAL-U-CUP  
9. 308-1845 J [1] SEAL-WIPER  
10. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
11. 4T-5613 J [1] RING-WEAR  
12. 6J-1972 J [1] SEAL AS  
13. 6J-5731 J [1] RING-BACKUP  
14. 6J-5733 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  238-4462 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART (S) MARKED J
  M   METRIC PART
 

#SEBP43021048
 

113-7754: CYLINDER GP-RIPPER

113-7754 CYLINDER GP-RIPPER -LIFT
S/N B9L1-UP
101.6-MM (4-IN) BORE X 482.6-MM (19-IN) STROKE
PART OF 175-2559, 248-1322, 296-3528 RIPPER AR
i00089861 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-7755 [1] CYLINDER AS  
1A. 8J-9911 [2] BUSHING  
  9T-8958 [1] TRUNNION  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 3S-7023 [1] WASHER (34X57X6-MM THK)  
4. 5J-5402 J [1] SEAL AS  
5. 6J-2797 J [1] RING-WEAR  
6. 9T-3133 [1] PISTON  
7. 113-7756 [1] ROD AS  
7A. 8J-9910 [1] BUSHING  
8. 175-7900 J [1] SEAL-O-RING  
9. 2K-6830 J [1] RING-BACKUP  
10. 6E-0775 [1] HEAD AS  
11. 4T-5613 JLN [1] RING-WEAR  
12. 289-2946 JLN [1] SEAL-U-CUP  
13. 289-2935 JLN [1] SEAL AS-BUFFER  
14. 308-1845 JLN [1] SEAL-WIPER  
   
    AVAILABLE REPAIR KIT(S):
  185-7688 J [1] KIT-SEAL (RIPPER CYLINDER)  
    (INCLUDES SEAL-O-RING & BACKUP RING)
  185-7690 L [1] KIT-SEAL (RIPPER CYLINDER)  
    (INCLUDES SEAL AS, WEAR RING, HEAD SEAL, & SEAL)
  185-7691 N [1] KIT-SEAL (RIPPER CYLINDER)  
    (INCLUDES SEAL AS, WEAR RING, HEAD SEAL, & SEAL-O-RING)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L INCLUDES PART(S) MARKED L
  M   METRIC PART
  N   KIT MARKED N INCLUDES PART(S) MARKED N
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP43021049
 

326-2227: CYLINDER GP-RIPPER

326-2227 CYLINDER GP-RIPPER
S/N B9L1-UP
110-MM (4.33-IN) BORE X 383.5 (15.1-IN) STROKE
PART OF 324-0889, 539-6894 RIPPER AR
i03925455 SEBP4302
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-7865 J [1] RING-BACKUP  
2. 9X-7301 J [1] SEAL AS  
3. 175-7901 J [1] SEAL-O-RING  
4. 233-0619 J [1] SEAL-WIPER  
5. 266-9389 [1] PISTON  
6. 266-9967 [1] HEAD  
7. 310-2186 J [1] SEAL-O-RING  
8. 329-5113 [1] CYLINDER AS  
9. 329-5116 [1] ROD AS  
10. 119-5434 J [1] RING  
11. 141-0709 J [1] RING-WEAR  
12. 167-2183 J [1] SEAL AS-BUFFER  
13. 167-2303 J [1] SEAL-U-CUP  
14. 2K-0512 [1] LOCKNUT  
   
    AVAILABLE REPAIR KIT(S):
  417-3698 J [1] KIT-HYD CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Disassembly and Assembly Procedure for 255-8000 Hydraulic Cylinder Gp (Snow Wing){7562}
Disassembly and Assembly Procedure for 255-8000 Hydraulic Cylinder Gp (Snow Wing){7562}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Specifications
Centershift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Blade Lift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Wheel Lean Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Steering Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Articulation Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Blade Tip Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Centershift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Ripper Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Sideshift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Articulation Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Steering Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Steering Cylinder and Mounting
120M, 140M and 160M Motor Graders All Wheel Drive
Steering Cylinder (All Wheel Drive)
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Blade Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
REMAN POSITION SENSING STEERING CYLINDER GROUPS FOR M-SERIES MOTOR GRADERS
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
CATERPILLAR POSITION SENSING CYLINDERS (PSCS)
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
Testing and Adjusting
Hydraulic Cylinder Drift - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Cylinder Cycle Time - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Steering System - Purge
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Troubleshooting
MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Disassembly and Assembly
Centershift Cylinder - Remove and Install
160M Motor Grader Machine Systems
Sideshift Cylinder - Remove and Install
160M Motor Grader Machine Systems
Blade Tip Cylinder - Remove and Install
160M Motor Grader Machine Systems
Ripper Lift Cylinder - Remove and Install
160M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
160M Motor Grader Machine Systems
Wheel Lean Cylinder - Remove and Install
160M Motor Grader Machine Systems
Blade Lift Cylinder - Remove and Install
160M Motor Grader Machine Systems
Steering Cylinder - Remove and Install
160M Motor Grader Machine Systems
Service Magazine
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}

Caterpillar Parts SIS Catalog 160M :

Truck sale:

207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.